INDIRECT VOLTAMMETRIC DETERMINATION OF TRACE SULFATE IN NATURAL WATERS WITH THE ADSORPTIVE COMPLEX WAVE OF LEAD(Ⅱ)-TETRAKIS (4-TRIMETHYLAMMONIUM PHENYL) PORPHYRIN

The indirect voltammetric determination of trace sulfate (2.0×10^(-6)～4.0×10^(-5) mol/L ) with the adsorptive complex wave of lead(Ⅱ)-tetrakis (4-trimethylammonium phenyl) porphyrin (PbTTMAPP) is reported.This method has been used for the analysis of natural waters with satisfactory results.

Frequency-dependent viscoelasticity effects on the wave attenuation performance of multi-layered periodic foundations

In this paper,layered periodic foundations(LPFs)are numerically examined for their responses to longitudinal and transverse modes in the time and frequency domains.Three different unit-cells,i.e.,2-layer,4-layer,and 6-layer unit-cells,comprising concrete/rubber,concrete/rubber/steel/rubber,and concrete/rubber/steel/rubber/lead/rubber materials,respectively,are taken into account.Also,the viscoelasticity behavior of the rubber is modeled with two factors,i.e.,a frequency-independent(FI)loss factor and a linear frequency-dependent(FD)loss factor.Following the extraction of the complex dispersion curves and the identification of the band gaps(BGs),the simulations of wave transmission in the time and frequency domains are performed using the COMSOL software.Subsequent parametric studies evaluate the effects of the rubber viscoelasticity models on the dispersion curves and the wave transmission for the longitudinal and transverse modes.The results show that considering the rubber viscoelasticity enhances the wave attenuation performance.Moreover,the transverse-mode damping is more sensitive to the viscoelasticity model than its longitudinal counterpart.The 6-layer unit-cell LPF exhibits the lowest BG,ranging from 4.8 Hz to 6.5 Hz.

Low Complexity Joint Hybrid Precoding for Millimeter Wave MIMO Systems

In millimeter wave(mmWave) multiple-input multiple-output(MIMO) systems, hybrid precoding has been widely used to overcome the severe propagation loss. In order to improve the spectrum efficiency with low complexity, we propose a joint hybrid precoding algorithm for single-user mmWave MIMO systems in this paper. By using the concept of equivalent channel, the proposed algorithm skillfully utilizes the idea of alternating optimization to complete the design of RF precoder and combiner. Then, the baseband precoder and combiner are computed by calculating the singular value decomposition of the equivalent channel. Simulation results demonstrate that the proposed algorithm can achieve satisfactory performance with quite low complexity. Moreover, we investigate the effects of quantization on the analog components and find that the proposed scheme is effective even with coarse quantization.

Complex wave excitations general （2＋1）-dimensional and chaotic patterns for a Korteweg-de Vries system

Starting from an improved mapping approach and a linear variable separation approach, a new family of exact solutions （including solitary wave solutions, periodic wave solutions and rational function solutions） with arbitrary functions for a general （2＋1）-dimensional Korteweg de solutions, we obtain some novel dromion-lattice solitons, system Vries system （GKdV） is derived. According to the derived complex wave excitations and chaotic patterns for the GKdV

Numerical Simulation of the Protective Effect of Complex Boundaries Toward Shock Waves in a 3D Explosive Field

A numerical method is presented that simulates 3D explosive field problems. A code MMIC3D using this method can be used to simulate the propagation and reflected effects of all kinds of rigid boundaries to shock waves produced by an explosive source. These numerical results indicate that the code MMIC3D has the ability in computing cases such as 3D shock waves produced by air explosion, vortex region of the shock wave, the Mach wave, and reflected waves behind rigid boundaries.

Amplitude wave in one-dimensional complex Ginzburg-Landau equation

The wave propagation in the one-dimensional complex Ginzbur-Landau equation （CGLE） is studied by considering a wave source at the system boundary. A special propagation region, which is an island-shaped zone surrounded by the defect turbulence in the system parameter space, is observed in our numerical experiment. The wave signal spreads in the whole space with a novel amplitude wave pattern in the area. The relevant factors of the pattern formation, such as the wave speed, the maximum propagating distance and the oscillatory frequency, are studied in detail. The stability and the generality of the region are testified by adopting various initial conditions. This finding of the amplitude pattern extends the wave propagation region in the parameter space and presents a new signal transmission mode, and is therefore expected to be of much importance.

WAVE SUPERPOSITION METHOD BASED ON VIRTUAL SOURCE BOUNDARY WITH COMPLEX RADIUS VECTOR FOR SOLVING ACOUSTIC RADIATION PROBLEMS

By virtue of the comparability between the wave superposition method and the dynamic analysis of structures, a general format for overcoming the non-uniqueness of solution induced by the wave superposition method at the eigenfrequencies of the corresponding interior problems is proposed. By adding appropriate damp to the virtual source system of the wave superposition method, the unique solutions for all wave numbers can be ensured. Based on this thought, a novel method-wave superposition method with complex radius vector is constructed. Not only is the computational time of this method approximately equal to that of the standard wave superposition method, but also the accuracy is much higher compared with other correlative methods. Finally, by taking the pulsating sphere and oscillating sphere as examples, the results of calculation show that the present method can effectively overcome the non-uniqueness problem.

Complex modes and traveling waves in axially moving Timoshenko beams

Complex modes and traveling waves in axially moving Timoshenko beams are studied. Due to the axially moving velocity, complex modes emerge instead of real value modes. Correspondingly, traveling waves are present for the axially moving material while standing waves dominate in the traditional static structures. The analytical results obtained in this study are verified with a numerical differential quadrature method.

Complex Wave Solutions for (2+1)-Dimensional Modified Dispersive Water Wave System

The extended Riccati mapping approach^[1] is further improved by generalized Riccati equation, and combine it with variable separation method, abundant new exact complex solutions for the （2＋1）-dimensional modified dispersive water-wave （MDWW） system are obtained. Based on a derived periodic solitary wave solution and a rational solution, we study a type of phenomenon of complex wave.

Solitary Wave Solutions of Discrete Complex Ginzburg-Landau Equation by Modified Adomian Decomposition Method

In this paper, exact and numerical solutions are calculated for discrete complex Ginzburg-Landau equation with initial condition by considering the modified Adomian decomposition method （mADM）, which is an efficient method and does not need linearization, weak nonlinearity assumptions or perturbation theory. The numerical solutions are also compared with their corresponding analytical solutions. It is shown that a very good approximation is achieved with the analytical solutions. Finally, the modulational instability is investigated and the corresponding condition is given.

Cambering of Four High Cold Mill with the View of Reducing Roller Ends Contact and Preventing Complex Waves

Based on lots of field experiments and theoretical research, fully thinking the equipment and production craft characters of four high cold mill, a new cambering scheme for four high cold mill is advanced in this paper. This scheme considered the need of production of multi-specification products, as well as the control of roller ends contact. The most homogeneous transverse distribution of front tension is the control target and the homogeneous pressure distribution between rollers is the constraint condition. In this technology, working roll curve adapt the combination of cosine curve and high order curve, backup roll adapt the combination of cosine curve, straight line and high order curve. The cosine subentry of working roll and the high order curve subentry are used to control edge wave, the high order curve subentry of working roll is used to control the roll contact, the cosine subentry of backup roll is used to reduce the center wave. That’s the features of this technology. On-site testing shows that the new cambering and combination can not only manage the complex waves of normal four high cold mill effectively, but also will reduce the contact between roller ends and minish roll consumption. This technology has created economic benefits for enterprises.

A high order boundary scheme to simulate complex moving rigid body under impingement of shock wave

In the paper, we study a high order numerical boundary scheme for solving the complex moving boundary problem on a fixed Cartesian mesh, and numerically investigate the moving rigid body with the complex boundary under the impingement of an inviscid shock wave. Based on the high order inverse Lax-Wendroff(ILW) procedure developed in the previous work(TAN, S. and SHU, C. W. A high order moving boundary treatment for compressible inviscid flows. Journal of Computational Physics, 230(15),6023–6036(2011)), in which the authors only considered the translation of the rigid body,we consider both translation and rotation of the body in this paper. In particular, we reformulate the material derivative on the moving boundary with no-penetration condition, and the newly obtained formula plays a key role in the proposed algorithm. Several numerical examples, including cylinder, elliptic cylinder, and NACA0012 airfoil, are given to indicate the effectiveness and robustness of the present method.

Numerical Study of Effects of Complex Topography on Surface-Piercing Wave-Body Interactions

In this paper, wave-body interactions under the effects of complex topography are investigated numerically by a two-phase incompressible Reynolds-Averaged Navier-Stokes(RANS) solver in OpenFOAM. A submerged bottom-standing structure is distributed below the floating body, and the effects of the water depth and top width of the submerged structure on wave-body interactions are studied. The results show that the submerged structure can affect wave loads and roll motion. The vertical force can be amplified on the fixed body when the water depth of the submerged structure is smaller than half of the water depth of the body. The top width significantly affects the vertical force when the top width is smaller than the incident wave length and larger than the body width. For the free-rolling body, roll amplitude can be increased when the ratio of the incident wave length to the water depth of the submerged structure is large enough. On the resonance condition, roll amplitude is slightly reduced by the submerged structure. The effects of the top width on roll amplitude are remarkable when special conditions are fulfilled.

COMPLEX RAY EXPANSION OF PLANE WAVE

Based on the high frequency approximation theory, the complex ray expansion of plane wave is derived. The results obtained may be regarded as the basis of the numerical expansion of plane wave, which has been used successfully in some problems.

Fusion, fission, and annihilation of complex waves for the(2+1)-dimensional generalized Calogero–Bogoyavlenskii–Schiff system

With the help of the symbolic computation system, Maple and Riccati equation （ξ＇ = ao ＋ a1ξ＋ a2ξ2）, expansion method, and a linear variable separation approach, a new family of exact solutions with q = lx ＋ my ＋ nt ＋ Г（x,y, t） for the （2＋1）-dimensional generalized Calogero-Bogoyavlenskii-Schiff system （GCBS） are derived. Based on the derived solitary wave solution, some novel localized excitations such as fusion, fission, and annihilation of complex waves are investigated.

DETERMINATION OF HISTIDINE BY DIFFERENTIAL PULSE ADSORPTIVE STRIPPING VOLTAMMETRY OF ITS NICKEL(Ⅱ)COMPLEX

Abstract: Histidine was determined at the 5. 0 ×10-1.0×10-5mol/L level by differential pulse adsorptive cathodic etripping voltammetry at a hanging mercury drop electrode using the reduction peak of its nickel(Ⅱ) complex at -1. 16v(vs. Ag(AgCl) obtained in pH-10. 2 borate buffer solution. Other amino acid. do not interfere . This methed has been used for the direct determination of histidiue in serum.

A Conceptual Numerical Model of the Wave Equation Using the Complex Variable Boundary Element Method

In this work, a conceptual numerical solution of the two-dimensional wave partial differential equation (PDE) is developed by coupling the Complex Variable Boundary Element Method (CVBEM) and a generalized Fourier series. The technique described in this work is suitable for modeling initial-boundary value problems governed by the wave equation on a rectangular domain with Dirichlet boundary conditions and an initial condition that is equal on the boundary to the boundary conditions. The new numerical scheme is based on the standard approach of decomposing the global initial-boundary value problem into a steady-state component and a time-dependent component. The steady-state component is governed by the Laplace PDE and is modeled with the CVBEM. The time-dependent component is governed by the wave PDE and is modeled using a generalized Fourier series. The approximate global solution is the sum of the CVBEM and generalized Fourier series approximations. The boundary conditions of the steady-state component are specified as the boundary conditions from the global BVP. The boundary conditions of the time-dependent component are specified to be identically zero. The initial condition of the time-dependent component is calculated as the difference between the global initial condition and the CVBEM approximation of the steady-state solution. Additionally, the generalized Fourier series approximation of the time-dependent component is fitted so as to approximately satisfy the derivative of the initial condition. It is shown that the strong formulation of the wave PDE is satisfied by the superposed approximate solutions of the time-dependent and steady-state components.

Defects Recognition of 3D Braided Composite Based on Dual-Tree Complex Wavelet Packet Transform

Textile-reinforced composites,due to their excellent highstrength-to-low-mass ratio, provide promising alternatives to conventional structural materials in many high-tech sectors. 3D braided composites are a kind of advanced composites reinforced with 3D braided fabrics; the complex nature of 3D braided composites makes the evaluation of the quality of the product very difficult. In this investigation,a defect recognition platform for 3D braided composites evaluation was constructed based on dual-tree complex wavelet packet transform( DT-CWPT) and backpropagation( BP) neural networks. The defects in 3D braided composite materials were probed and detected by an ultrasonic sensing system. DT-CWPT method was used to analyze the ultrasonic scanning pulse signals,and the feature vectors of these signals were extracted into the BP neural networks as samples. The type of defects was identified and recognized with the characteristic ultrasonic wave spectra. The position of defects for the test samples can be determined at the same time. This method would have great potential to evaluate the quality of 3D braided composites.

Complex Wave Excitations in Generalized Broer-Kaup System

Starting from an improved projective method and a linear variable separation approach, new families of variable separation solutions （including solltary wave solutlons, periodic wave solutions and rational function solutions） with arbitrary functions [or the （2＋ 1）-dimensional general/zed Broer-Kaup （GBK） system are derived. Usually, in terms of solitary wave solutions and/or rational function solutions, one can find abundant important localized excitations. However, based on the derived periodic wave solution in this paper, we reveal some complex wave excitations in the （2＋1）-dimensional GBK system, which describe solitons moving on a periodic wave background. Some interesting evolutional properties for these solitary waves propagating on the periodic wave bactground are also briefly discussed.

GPR Wave Propagation Model in a Complex Geoelectric Structure Using Conformal First-Order Symplectic Euler Algorithm

Possessing advantages such as high computing efficiency and ease of programming,the Symplectic Euler algorithm can be applied to construct a groundpenetrating radar(GPR)wave propagation numerical model for complex geoelectric structures.However,the Symplectic Euler algorithm is still a difference algorithm,and for a complicated boundary,ladder grids are needed to perform an approximation process,which results in a certain amount of error.Further,grids that are too dense will seriously decrease computing efficiency.This paper proposes a conformal Symplectic Euler algorithm based on the conformal grid technique,amends the electric/magnetic fieldupdating equations of the Symplectic Euler algorithm by introducing the effective dielectric constant and effective permeability coefficient,and reduces the computing error caused by the ladder approximation of rectangular grids.Moreover,three surface boundary models(the underground circular void model,the undulating stratum model,and actual measurement model)are introduced.By comparing reflection waveforms simulated by the traditional Symplectic Euler algorithm,the conformal Symplectic Euler algorithm and the conformal finite difference time domain(CFDTD),the conformal Symplectic Euler algorithm achieves almost the same level of accuracy as the CFDTD method,but the conformal Symplectic Euler algorithm improves the computational efficiency compared with the CFDTD method dramatically.When the dielectric constants of the two materials vary greatly,the conformal Symplectic Euler algorithm can reduce the pseudo-waves almost by 80% compared with the traditional Symplectic Euler algorithm on average.