Development and performance evaluation of high temperature resistant strong adsorption rigid blocking agent

As drilling wells continue to move into deep ultra-deep layers,the requirements for temperature resistance of drilling fluid treatments are getting higher and higher.Among them,blocking agent,as one of the key treatment agents,has also become a hot spot of research.In this study,a high temperature resistant strong adsorption rigid blocking agent(QW-1)was prepared using KH570 modified silica,acrylamide(AM)and allyltrimethylammonium chloride(TMAAC).QW-1 has good thermal stability,average particle size of 1.46μm,water contact angle of 10.5.,has a strong hydrophilicity,can be well dispersed in water.The experimental results showed that when 2 wt%QW-1 was added to recipe A(4 wt%bentonite slurry+0.5 wt%DSP-1(filtration loss depressant)),the API filtration loss decreased from 7.8to 6.4 m L.After aging at 240.C,the API loss of filtration was reduced from 21 to 14 m L,which has certain performance of high temperature loss of filtration.At the same time,it is effective in sealing 80-100mesh and 100-120 mesh sand beds as well as 3 and 5μm ceramic sand discs.Under the same conditions,the blocking performance was superior to silica(5μm)and calcium carbonate(2.6μm).In addition,the mechanism of action of QW-1 was further investigated.The results show that QW-1 with amide and quaternary ammonium groups on the molecular chain can be adsorbed onto the surface of clay particles through hydrogen bonding and electrostatic interaction to form a dense blocking layer,thus preventing further intrusion of drilling fluid into the formation.

Explosion resistance performance of reinforced concrete box girder coated with polyurea:Model test and numerical simulation

To study the anti-explosion protection effect of polyurea coating on reinforced concrete box girder,two segmental girder specimens were made at a scale of 1:3,numbered as G(without polyurea coating)and PCG(with polyurea coating).The failure characteristics and dynamic responses of the specimens were compared through conducting explosion tests.The reliability of the numerical simulation using LS-DYNA software was verified by the test results.The effects of different scaled distances,reinforcement ratios,concrete strengths,coating thicknesses and ranges of polyurea were studied.The results show that the polyurea coating can effectively enhance the anti-explosion performance of the girder.The top plate of middle chamber in specimen G forms an elliptical penetrating hole,while that in specimen PCG only shows a very slight local dent.The peak vertical displacement and residual displacement of PCG decrease by 74.8% and 73.7%,respectively,compared with those of specimen G.For the TNT explosion with small equivalent,the polyurea coating has a more significant protective effect on reducing the size of fracture.With the increase of TNT equivalent,the protective effect of polyurea on reducing girder displacement becomes more significant.The optimal reinforcement ratio,concrete strength,thickness and range of polyurea coating were also drawn.

Preparation,Performance and Slag Resistant Mechanism of Low Thermal Conductivity Microporous Corundum

The microporous corundum material was prepared using alumina micro-powder as the main raw material, alumina sol and starch as binders by a wet process, achieving the bulk density of 3.05 g · cm^-3, the apparent porosity of 9. 1%, the closed porosity of 12.3%, the median pore diameter of 0. 43 μm, and the thermal conductivity of 6. 5 W· m^-1· K^-1 at 800 ℃ which is 41.6% lower than that of common corundum. The slag resistance of the microporous corundum material was studied by immersion and compared with that of the common corundum aggregate, and the slag resistant mechanism of microporous corundum material was revealed. The results show that the slag resistance of the microporous corundum material is superior to that of the common corundum aggregate, the SEM and EDX show that on the reaction interface between microporous corundum and molten, slag, a continuous isolation layer with a large quantity of CA2 and CA6 columnar crystals is formed; while the common corundum aggregate reacts with the molten slag interface to form a discontinuous isolation layer of columnar crystals, through which a lot of molten slag corrodes or permeates into the aggregate. The mechanism is mainly that the microporous structure is more advantageous to nucleation and growth of CA2 and CA6 columnar crystals; in the reaction with the aggregate, the molten slag gets saturated and the critical solution thickness of the microporous corundum and the common corundum is 0. 16 μm and 0. 34 μm, respectively, this is caused by the smaller microporous corundum aggregate pores; and the smaller pores also increase the second phase ripening rate of microporous corundum, which is 9. 7 times of that of the common corundum.

National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology

Founded in 2012,the National Joint Engineering Research Center of High Performance Metal Wear Resistant Materials Technology at Jinan University,one of the'211'key national universities in China,specializes in the research and development of iron based wear resistant materials and their casting technologies to provide support to the production process.The Research Center serves the'Guangdong Province Ceeusro Innovation Platform for Common Technology of High Performance Wear Resistant Materials”,“Guangdong Province Engineering Research Center for Wear Resistant and Special Functional Materials”.

Earthquake-resistant performance investigation for rural buildings in Zhongxiang area, China

We carried out a census of the rural residential buildings of Zhongxiang area＇ s 17 towns. Next, we conducted a sample survey in four townships： Huji, Shipai, Zhangji, and Jiuli. According to the census and sample survey data of the rural residence buildings, we evaluated the quality and earthquake-resistant performance of the rural buildings for the various local rural residential structural types. The results showed that there are four main factors affecting the seismic performance of the local rural residences ： （ 1 ） Foundations are not made appropriately （ such as by compaction or some other fill） but are built directly in the farming soil. （2） Seismic measures are not completely implemented. Structure construction measures are not in place at the junction of the vertical and horizontal wall. The vertical wall joints are not the result of the same masonry techniques as the horizontal joints. There are no lintels above the door and window openings, or if there are any, the length of the lintels is less than 240 mm. （3） The brick masonry wall has low strength. The greatest housing wall mortar strength is between M0. 4 - 1.5, much lower than the strength of the brick. （4） The building material and construction quality are poor. The quality of the mortar masonry wall is poor. The cracks between the bricks are uneven, even in the seams.

Combined effect of steel fibres and steel rebars on impact resistance of high performance concrete

The impact properties of normal concrete (NC) and reinforced concrete (RC) specimens,steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibre dosages were investigated with the drop-weight impact test recommended by ACI Committee 544.The results indicate that the number of blows to final failure is greatly increased by addition of steel fibres.Moreover,the combination of steel fibres and steel rebars demonstrates a significant positive composite effect on the impact resistance,which results in the improvement in impact toughness of concrete specimens.In the view of variation of impact test results,the two-parameter Weibull distribution was adopted to analyze the experimental data.It is proved that the probabilistic distributions of the blows to first crack and to final failure of six types of samples approximately follow two-parameter Weibull distribution.

Corrosion resistance and anti-soiling performance of micro-arc oxidation/graphene oxide/stearic acid superhydrophobic composite coating on magnesium alloys

Magnesium(Mg)alloys,the lightest metal construction material used in industry,play a vital role in future development.However,the poor corrosion resistance of Mg alloys in corrosion environments largely limits their potential wide applications.Therefore,a micro-arc oxidation/graphene oxide/stearic acid(MAO/GO/SA)superhydrophobic composite coating with superior corrosion resistance was fabricated on a Mg alloy AZ91D through micro-arc oxidation(MAO)technology,electrodeposition technique,and self-assembly technology.The composition and microstructure of the coating were characterized by scanning electron microscopy,X-ray diffraction,energy dispersive spectroscopy,and Raman spectroscopy.The effective protection of the MAO/GO/SA composite coating applied to a substrate was evaluated using potentiodynamic polarization,electrochemical impedance spectroscopy tests,and salt spray tests.The results showed that the MAO/GO/SA composite coating with a petal spherical structure had the best superhydrophobicity,and it attained a contact angle of 159.53°±2°.The MAO/GO/SA composite coating exhibited high resistance to corrosion,according to electrochemical and salt spray tests.

Detection performance and inversion processing of logging-while-drilling extra-deep azimuthal resistivity measurements

We present systematic investigations on the physics,detection performance and inversion of logging-while-drilling extradeep azimuthal resistivity measurements(EDARM).First,the definitions of EDRAM measurements are discussed,followed by the derivation of the attenuation and phase-shift geometrical factors to illustrate the relative contributions of formation units to the observed signals.Then,a new definition of detection depth,which considers the uncertainty of inversion results caused by the data noise,is proposed to quantify the detection capability of ED ARM.Finally,the B ayesian theory associated with Markov chain Monte Carlo sampling is introduced for fast processing of EDARM data.Numerical results show that ED ARM is capable of detecting the azimuth and distance of remote bed boundaries,and the detection capability increases with increasing spacing and resistivity contrast.The EDARM tool can accommodate a large range of formation resistivity and is able to provide the resistivity anisotropy at arbitrary relative dipping angles.In addition,multiple bed boundaries and reservoir images near the borehole are readily obtained by using the Bayesian inversion.

Developing polydopamine modified molybdenum disulfide/epoxy resin powder coatings with enhanced anticorrosion performance and wear resistance on magnesium lithium alloys

Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive application.There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys.Herein,the epoxy resin powder coating with polydopamine modified molybdenum disulfide(MoS_(2)@PDA-EP powder coating with 0,0.1,0.2,0.5,1.0 wt.%loading)was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance.The results revealed that the addition of MoS_(2)@PDA enhanced the adhesion strength between coatings and alloys,wear resistance and corrosion protection of the powder coatings.Among them,the optimum was obtained by 0.2 wt.%MoS_(2)@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix.To conclude,MoS_(2)@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.

Discrete element modelling of railway ballast performance considering particle shape and rolling resistance

To simulate ballast performance accurately and efficiently,the input in discrete element models should be carefully selected,including the contact model and applied particle shape.To study the effects of the contact model and applied particle shape on the ballast performance(shear strength and deformation),the direct shear test(DST)model and the large-scale process simulation test(LPST)model were developed on the basis of two types of contact models,namely the rolling resistance linear(RRL)model and the linear contact(LC)model.Particle shapes are differentiated by clumps.A clump is a sphere assembly for one ballast particle.The results show that compared with the typical LC model,the RRL method is more efficient and realistic to predict shear strength results of ballast assemblies in DSTs.In addition,the RRL contact model can also provide accurate vertical and lateral ballast deformation under the cyclic loading in LPSTs.

Effects of Nano Chinese Herbal Medicine Feed Additive on Growth Performance,Meat Quality and Disease Resistance of Chickens

[Objectives]To explore the effects of nano compound Chinese herbal medicine feed additive on growth performance,meat quality and disease resistance of chickens.[Methods]Chickens were fed with nano compound Chinese herbal medicine feed additive developed by Hunan Polytechnic of Environment and Biology,including 120 chickens in the treatment group and 120 chickens in the control group(CK).The growth performance indices(body weight gain,feed to gain ratio and slaughter index),meat quality indices(pH value,color,drip loss,shear force)and disease resistance indices(morbidity and mortality)of the chickens in the treatment and CK groups were recorded and determined,respectively.[Results]The inclusion of 2%nano compound Chinese herbal medicine feed additive in the diet significantly increased the growth rate,reduced the feed-to-gain ratio and improved the meat quality of the chickens.Supplementing Chinese herbal medicine could increase the pH value and reduce the drip loss and shear force of chicken meat.At the same time,the body's immune function,antioxidant level and resistance against diseases of the chickens fed with nano compound Chinese herbal medicine feed additive were improved.[Conclusions]The inclusion of nano compound Chinese herbal medicine feed additive in the diet can improve the growth performance,meat quality and disease resistance of chickens.

An Experimental Study on the Effect of the Side Hull Symmetry on the Resistance Performance of a Wave‑Piercing Trimaran

This paper presented the results of an experimental investigation into the resistance performance of a wave-piercing trimaran with three alternative side hull forms,including asymmetric inboard,asymmetric outboard,and symmetric at various stagger/separation positions.Model tests were carried out at the National Iranian Marine Laboratory(NIMALA)towing tank using a scale model of a trimaran at the Froude numbers from 0.225 to 0.60.Results showed that by moving the side hulls to the forward of the main hull transom,the total resistance coefficient of trimaran decreased.Findings,furthermore,demonstrated that the symmetry shape of the side hull had the best performance on total resistance among three side hull forms.Results of this study are useful for selecting the side hull configuration from the resistance viewpoint.

SULFATE RESISTANCE MECHANISM OF HIGH- PERFORMANCE CONCRETE CONTAINING NCI

It is found that the incorporation of Nitrite Corrosion Inhibitor (NCI) greatly weakens the resistance of mixtures to sulfate attack. To study the mechanism of this phenomenon, in this paper, the influence of NCI addition on the cement paste and microstructure change of high performance concrete specimens is studied by means of quantitative XRD, SEM tests. The results demonstrate that the incorporation of NCI accelerates the formation of calcium hydroxide and ettringite crystals, and weakens the pore refinement effect caused by the secondary hydration reaction of fly ash and microsilica. At the age up to one year, the relative crystal quantity in mixture containing NCI is always higher than that in control mixture. The reasons for the degradation in sulfate resistance of mixtures may be attributed to the increase and stability of the calcium hydroxide and ettringite crystals formed and the weakening of secondary hydration reaction. Based on the results, conclusion can be drawn that NCI should be used cautiously in practical engineering where high resistance to sulfate attack is required. (Author abstract) 7 Refs.

Experimental Study on the Resistance and Splash Performances of Water Collecting Devices for Mechanical Draft Cooling Towers

In recent years,water collecting systems,with the associated advantages of energy saving and noise reduction,have become the foundation for the development of a scheme to optimize the structure of cooling towers.To explore the feasibility of this approach for mechanical draft cooling towers,a small-scale experimental device has been built to study the resistance and splash performances of three U-type water collecting devices(WCDs)for different water flow rates and wind speeds.The experimental results show that within the considered ranges of wind speed and water flow rate,the pressure drop of the different WCDs can vary significantly.The resistance and local splash performances can also be remarkably different.Some recommendations about the most suitable system are provided.Moreover,a regression analysis of the experimental data is conducted,and the resulting fitting formulas for resistance and splash performance of WCD are reported.

Direct tension and fracture resistance curves of ultra high performance marine composite materials

Fracture behavior is one of the most important,yet still little understood properties of ultra-high performance cementitious composites(UHPCC),a new marine structural engineering material. Research on the fracture and direct tension behavior of UHPCC was carried out.The constitution law of UHPCC was divided into three phases:pre-partial debonding,partial debonding,and pullout phases.A direct tension constitution law was constructed based on the proposed fiber reinforcing parameter as a function of fiber volume fraction,fiber diameter and length,and fiber bonding strength.With the definition of linear crack shape,the energy release rate of UHPCC was derived and the R-curve equation was calculated from this.Loading tests of UHPCC using a three-point bending beam with an initial notch were carried out.The predictions from the proposed R-curve were in good agreement with the test results, indicating that the proposed R-curve accurately describes the fracture resistance of UHPCC.Introduction of a fiber reinforcement parameter bridges the fracture property R-curve and micro-composites’ mechanics parameters together.This has laid the foundation for further research into fracture properties based on micro-mechanics.The proposed tension constitution law and R-curve can be references for future UHPCC fracture evaluation.

Effect of Pulse and dc Formation on the Performance of One-Transistor and One-Resistor Resistance Random Access Memory Devices

We investigate the effect of the formation process under pulse and dc modes on the performance of one transistor and one resistor （1 T1R） resistance random access memory （RRAM） device. All the devices are operated under the same test conditions, except for the initial formation process with different modes. Based on the statistical results, the high resistance state （FIRS） under the dc forming mode shows a lower value with better distribution compared with that under the pulse mode. One of the possible reasons for such a phenomenon originates from different properties of conductive filament （CF） formed in the resistive switching layer under two different modes. For the dc forming mode, the formed filament is thought to be continuous, which is hard to be ruptured, resulting in a lower HRS. However, in the case of pulse forming, the filament is discontinuous where the transport mechanism is governed by hopping. The low resistance state （LRS） can be easily changed by removing a few trapping states from the conducting path. Hence, a higher FIRS is thus observed. However, the HRS resistance is highly dependent on the length of the gap opened. A slight variation of the gap length will cause wide dispersion of resistance.

Impact of resistance exercise training on physical performance of patients undergoing hemodialysis

Background:Hemodialysis is the major treatment option for patients with chronic kidney disease.With the increase in the number of maintenance hemodialysis patients,debilitating conditions of muscle willing and atrophy and numerous health problems associated with chronic kidney disease and hemodialysis have become the most significant concerns.Methods:This randomized controlled trial study design will be conducted at Al-Najaf city in the southern region of Iraq and carried out on 68 patients with chronic kidney disease undergoing hemodialysis for at least six months and who had a medically stable condition,which will be randomly divided into training group;exercise therapy and control,groups.The training group participated in 8-week(3 sessions per week)resistance exercise therapy in three sets of 10 repetitions of knee extension,hip flexion,and hip abduction with the use of an elastic band under the supervision of a training physiotherapist and researcher during the first hour of the three routine hemodialysis treatment session per week.But the control group did not experience any intervention.To analyze the data,two-way analysis of variance and Bonferroni statistical tests will be used at the significant level of(P=0.05).Discussion:Important features of this study include the randomization procedures,double-blind,large sample size,and a standardized protocol for resistance exercise training on the physical performance of hemodialysis patients.This study aims to determine the effectiveness of resistance exercise for the patient with chronic kidney disease and undergoing hemodialysis.Therefore,our results will be useful for patients with chronic kidney diseases,medical staff,and healthcare decision-makers.

THE INFLUENCE OF THERMAL RESISTANCE AND THERMAL MASS ON THE SEASONAL PERFORMANCE OF WALLING SYSTEMS IN AUSTRALIA

This paper describes an experimental investigation of the thermal performance of four Australian domestic walling systems(cavity brick,insulated cavity brick,insulated brick veneer and insulated reverse brick veneer)having various combinations of thermal insulation and of thermal mass location within the wall.This experimental analysis extends further the previous studies of the benefits of thermal mass on the overall thermal performance of building enclosures(Gregory et al.2008,Luo at al.2008,Alashaary et al.2009).The comparison is based on the time required to maintain thermal comfort for free-floating internal conditions.The results clearly show that internal comfort levels are influenced by both the thermal resistance of the walls as well as the extent and location of the thermal mass,with neither parameter being the sole predictor.The best thermal performance is therefore obtained by an appropriate combination of thermal mass and resistance,rather than focussing on the overall wall thermal resistance(R-value)alone.A new approach of density temperature plots for comparison of temperature variation is also used in the assessment of module thermal performance.

Performance of two different modules of long-strip multi-gap resistive plate chamber

Long-strip multi-gap resistive plate chamber(LMRPC) were built with(Module 1) or without(Module 2) adhesive tapes and silicones.Their performances were investigated by working gas mixtures of different gradient contents(Test 1:94%freon,5%iso-butane and 1%SF_6;Test 2:90%freon,5%iso-butane and 5%SF_6).Both the modules achieved 100%efficiency,with time resolutions of 75 and 70 ps.Comparatively,the Module 1 works with a lower applied HV at the higher noise level,and time resolution was not influenced greatly by the adhesive tapes and silicones.

Effect of linear carboxylic ester on low temperature performance of LiMn_2O_4-graphite cells

To improve the low-temperature performances of Li-ion cells, three types of linear carboxylic ester-based electrolyte, such as EC/EMC/EA（1：1：2, mass ratio）, EC/EMC/EP（1：1：2, mass ratio） and EC/EMC/EB（1：1：2, mass ratio）, were prepared to substitute for industrial electrolyte（EC/EMC/DMC）. Then, 18650-type Li Mn2O4-graphite cells（nominal capacity of 1150 mA ·h） were assembled and studied. Results show that the cells containing three types of electrolyte are able to undertake 5C discharging current with above 93% capacity retention at-20 °C. Electrochemical impedance spectra show that the discharge capacity fading of Li-ion cells at low temperature is mainly ascribed to the charge transfer resistance increasing with temperature decreasing. In comparison, the cells containing electrolyte of 1.0 mol/L LiPF6 in EC/EMC/EA（1：1：2, mass ratio） have the highest capacity retention of 90% at-40 °C and 44.41% at-60 °C, due to its lowest charge-transfer resistance.