Components with strong adsorption capacity for cholates from buckwheat proteins were screened, separated and purified by several methods, and the effects of ultra-high-pressure(UHP) on the structure and function of bu...Components with strong adsorption capacity for cholates from buckwheat proteins were screened, separated and purified by several methods, and the effects of ultra-high-pressure(UHP) on the structure and function of buckwheat 13S globulin(BW13SG) were studied. Samples were treated by UHP at different p H(3.0 and 7.0) value(s) and at 100–500 MPa for 10–30 min. The results showed that the tertiary structure of BW13SG was partially denatured and aggregated. The decrease in the unordered structure indicated that UHP resulted in a looser secondary structure of BW13SG. UHP treatment also increased solubility, emulsion activity and stability, foaming capacity and stability. The samples treated at 500 MPa, p H 3.0 for 30 min had the most enhanced functionality. Moreover, under this condition, the sodium cholate and sodium deoxycholate adsorption capacities of BW13SG were both higher than 98% and the adsorption capacity of sodium taurocholate, which can be difficult to adsorb, was higher than 60%.展开更多
By using the fundamental equations of axisymmetric shallow shells of revolution, the nonlinear bending of a shallow corrugated shell with taper under arbitrary load has been investigated. The nonlinear boundary value ...By using the fundamental equations of axisymmetric shallow shells of revolution, the nonlinear bending of a shallow corrugated shell with taper under arbitrary load has been investigated. The nonlinear boundary value problem of the corrugated shell was reduced to the nonlinear integral equations by using the method of Green＇s function. To solve the integral equations, expansion method was used to obtain Green＇s function. Then the integral equations were reduced to the form with degenerate core by expanding Green＇s function as series of characteristic function. Therefore, the integral equations become nonlinear algebraic equations. Newton＇ s iterative method was utilized to solve the nonlinear algebraic equations. To guarantee the convergence of the iterative method, deflection at center was taken as control parameter. Corresponding loads were obtained by increasing deflection one by one. As a numerical example,elastic characteristic of shallow corrugated shells with spherical taper was studied.Calculation results show that characteristic of corrugated shells changes remarkably. The snapping instability which is analogous to shallow spherical shells occurs with increasing load if the taper is relatively large. The solution is close to the experimental results.展开更多
This paper presents the analysis of dynamic characteristics of horizontal axis wind turbine blade, where the mode coupling among axial extension, flap vibration （out-of-plane bend- ing）, lead/lag vibration （in-plan...This paper presents the analysis of dynamic characteristics of horizontal axis wind turbine blade, where the mode coupling among axial extension, flap vibration （out-of-plane bend- ing）, lead/lag vibration （in-plane bending） and torsion is emphasized. By using the Bernoulli-Euler beam to describe the slender blade which is mounted on rigid hub and subjected to unsteady aero- dynamic force, the governing equation and characteristic equation of the coupled vibration of the blade are obtained. Due to the combined influences of mode coupling, centrifugal effect, and the non-uniform distribution of mass and stiffness, the explicit solution of characteristic equation is impossible to obtain. An equivalent transformation based on Green＇s functions is taken for the characteristic equation, and then a system of integrodifferential equations is derived. The nu- merical difference methods are adopted to solve the integrodifferential equations to get natural frequencies and mode shapes. The influences of mode coupling, centrifugal effect, and rotational speed on natural frequencies and mode shapes are analyzed. Results show that： （1） the influence of bending-torsion coupling on natural frequency is tiny; （2） rotation has dramatic influence on bending frequency but little influence on torsion frequency; （3） the influence of bending-bending coupling on dynamic characteristics is notable at high rotational speed; （4） the effect of rotational speed on bending mode is tiny.展开更多
In this paper,we considered the Length-biased weighted Lomax distribution and constructed new acceptance sampling plans(ASPs)where the life test is assumed to be truncated at a pre-assigned time.For the new suggested ...In this paper,we considered the Length-biased weighted Lomax distribution and constructed new acceptance sampling plans(ASPs)where the life test is assumed to be truncated at a pre-assigned time.For the new suggested ASPs,the tables of the minimum samples sizes needed to assert a specific mean life of the test units are obtained.In addition,the values of the corresponding operating characteristic function and the associated producer’s risks are calculated.Analyses of two real data sets are presented to investigate the applicability of the proposed acceptance sampling plans;one data set contains the first failure of 20 small electric carts,and the other data set contains the failure times of the air conditioning system of an airplane.Comparisons are made between the proposed acceptance sampling plans and some existing acceptance sampling plans considered in this study based on the minimum sample sizes.It is observed that the samples sizes based on the proposed acceptance sampling plans are less than their competitors considered in this study.The suggested acceptance sampling plans are recommended for practitioners in the field.展开更多
Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concept...Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concepts, state characteristic presented by system law collided by F-law and recognition of these states characteristic and recognition criterion and applications are given. Function one direction S-rough sets is one of basic forms of function S-rough sets （function singular rough sets）. Function one direction S-rough sets is importance theory and is a method in studying system law collision.展开更多
基金the financial support by the Open Project Program of State Key Laboratory of Dairy Biotechnology (No. SKLDB2018-002)National Natural Science Foundation of China (No. 31871805 & No. 31501437)+1 种基金Shanghai Municipal Education Commission (Plateau Discipline Construction Program)China Agriculture Research System (CARS-08-D2)。
文摘Components with strong adsorption capacity for cholates from buckwheat proteins were screened, separated and purified by several methods, and the effects of ultra-high-pressure(UHP) on the structure and function of buckwheat 13S globulin(BW13SG) were studied. Samples were treated by UHP at different p H(3.0 and 7.0) value(s) and at 100–500 MPa for 10–30 min. The results showed that the tertiary structure of BW13SG was partially denatured and aggregated. The decrease in the unordered structure indicated that UHP resulted in a looser secondary structure of BW13SG. UHP treatment also increased solubility, emulsion activity and stability, foaming capacity and stability. The samples treated at 500 MPa, p H 3.0 for 30 min had the most enhanced functionality. Moreover, under this condition, the sodium cholate and sodium deoxycholate adsorption capacities of BW13SG were both higher than 98% and the adsorption capacity of sodium taurocholate, which can be difficult to adsorb, was higher than 60%.
文摘By using the fundamental equations of axisymmetric shallow shells of revolution, the nonlinear bending of a shallow corrugated shell with taper under arbitrary load has been investigated. The nonlinear boundary value problem of the corrugated shell was reduced to the nonlinear integral equations by using the method of Green＇s function. To solve the integral equations, expansion method was used to obtain Green＇s function. Then the integral equations were reduced to the form with degenerate core by expanding Green＇s function as series of characteristic function. Therefore, the integral equations become nonlinear algebraic equations. Newton＇ s iterative method was utilized to solve the nonlinear algebraic equations. To guarantee the convergence of the iterative method, deflection at center was taken as control parameter. Corresponding loads were obtained by increasing deflection one by one. As a numerical example,elastic characteristic of shallow corrugated shells with spherical taper was studied.Calculation results show that characteristic of corrugated shells changes remarkably. The snapping instability which is analogous to shallow spherical shells occurs with increasing load if the taper is relatively large. The solution is close to the experimental results.
基金supported by the National Natural Science Foundation of China(Nos.11372257 and 11601007)Sichuan Provincial Project for Young Research Group of Scientific and Technological Innovations(2013)+1 种基金the Anhui Provincial Natural Science Foundation(No.1708085QA17)Pre-research Project Funds of Anhui University of Science and Technology(No.2016yz007)
文摘This paper presents the analysis of dynamic characteristics of horizontal axis wind turbine blade, where the mode coupling among axial extension, flap vibration （out-of-plane bend- ing）, lead/lag vibration （in-plane bending） and torsion is emphasized. By using the Bernoulli-Euler beam to describe the slender blade which is mounted on rigid hub and subjected to unsteady aero- dynamic force, the governing equation and characteristic equation of the coupled vibration of the blade are obtained. Due to the combined influences of mode coupling, centrifugal effect, and the non-uniform distribution of mass and stiffness, the explicit solution of characteristic equation is impossible to obtain. An equivalent transformation based on Green＇s functions is taken for the characteristic equation, and then a system of integrodifferential equations is derived. The nu- merical difference methods are adopted to solve the integrodifferential equations to get natural frequencies and mode shapes. The influences of mode coupling, centrifugal effect, and rotational speed on natural frequencies and mode shapes are analyzed. Results show that： （1） the influence of bending-torsion coupling on natural frequency is tiny; （2） rotation has dramatic influence on bending frequency but little influence on torsion frequency; （3） the influence of bending-bending coupling on dynamic characteristics is notable at high rotational speed; （4） the effect of rotational speed on bending mode is tiny.
基金funding this work through the Research Groups Program under Grant Number R.G.P.2/68/41.I.A.
文摘In this paper,we considered the Length-biased weighted Lomax distribution and constructed new acceptance sampling plans(ASPs)where the life test is assumed to be truncated at a pre-assigned time.For the new suggested ASPs,the tables of the minimum samples sizes needed to assert a specific mean life of the test units are obtained.In addition,the values of the corresponding operating characteristic function and the associated producer’s risks are calculated.Analyses of two real data sets are presented to investigate the applicability of the proposed acceptance sampling plans;one data set contains the first failure of 20 small electric carts,and the other data set contains the failure times of the air conditioning system of an airplane.Comparisons are made between the proposed acceptance sampling plans and some existing acceptance sampling plans considered in this study based on the minimum sample sizes.It is observed that the samples sizes based on the proposed acceptance sampling plans are less than their competitors considered in this study.The suggested acceptance sampling plans are recommended for practitioners in the field.
基金the Natural Science Foundation of Shandong Province of China (Y2004A04)the Natural Science Foundation of Fujian Province of China (Z0511049).
文摘Using function one direction S-rough sets （function one direction singular rough sets）, f-law and F- law and the concept of law distance and the concept of system law collided by F-law are given. Using these concepts, state characteristic presented by system law collided by F-law and recognition of these states characteristic and recognition criterion and applications are given. Function one direction S-rough sets is one of basic forms of function S-rough sets （function singular rough sets）. Function one direction S-rough sets is importance theory and is a method in studying system law collision.
