Impact of summer office set air-conditioning temperature on energy consumption and thermal comfort

To explore the relationship between summer office set air-conditioning temperature and energy consumption related to air conditioning use to provide human thermal comfort,a comparison experiment was conducted in three similar offices at temperatures of 24,26 and 28 ℃ respectively. A thermal comfort questionnaire survey was conducted. It is demonstrated that air-conditioner energy consumption at the set temperature of 28 ℃ is 113% and 271% lower than at 26 ℃ and 24 ℃,respectively. A linear relationship exists between air-conditioner energy consumption and the indoor and outdoor temperature difference. When comfortably dressed,over 80% of research participants accept the set temperature of 28 ℃. The regression analysis leads to a neutral temperature of 26.2 ℃ and an acceptable temperature of 28.2 ℃ for over 80% of the research participants subjects,indicating that the current 26 ℃ set temperature for offices in summer,required by Chinese General Office of the State Council,can be increased to 28 ℃. Moreover,analysis of predicted mean vote(PMV) index shows that a set temperature of 27 ℃,not 26 ℃,is sufficiently comfortable for office staff wearing long-sleeve shirts,long pants and leather shoes.

Entropy Assessment on Environmental Influence of Condense Heat in Recovery System in Air-Conditioning Refrigerating Machine

This paper presented an entropy evaluation method for the influences of condense heat recovery system on the environment.Aiming at the damage of the condense heat to the environment,an entropy of resource loss and an emission entropy from the condense heat recovery system in the air conditioning refrigerating machine were introduced.For the evaluation of the entropies,we developed a new algorithm for the parameter identification,called the composite influence coefficient,based on the Least Squares Support Vector Machine method.By simulation,the numerical experiments shows that the Least Squares Support Vector Machine method is one of the powerful methods for the parameter identification to compute the damage entropy of the condense heat,with the largest training error being-0.025(the relative error being-3.56%),and the biggest test error being 0.015(the relative error being 2.5%).

Selection of Weather Parameters for Air-Conditioning System Design for Buildings with Long Thermal Lag

Two building factors-a longer thermal lag of more than one hour for building envelops and a lag of indoor radiation to convert into cooling load-have impact on the instantaneous heat input and instantaneous cooling load.So the two factors should be taken into account when selecting the weather parameters for air-conditioning system design.This paper developed a new statistic method for the rational selection of coincident solar irradiance,dry-bulb and wet-bulb temperatures.The method was applied to historic weather records of 25 years in Hong Kong to generate coincident design weather data.And the results show that traditional design solar irradiance,dry-bulb and wet-bulb temperatures may be significantly overestimated in many conditions,and the design weather data for the three different constructions is not kept constant.

The Experiment and Simulation of Solid Desiccant Dehumidification for Air-Conditioning System in a Tropical Humid Climate

The aim of this research was to study and design a solid desiccant dehumidification system suitable for tropical climate to reduce the latent load of air-conditioning system and improve the thermal comfort. Different dehumidifiers such as desiccant column and desiccant wheel were investigated. The ANSYS and TRASYS software were used to predict the results of dehumidifiers and the desiccant cooling systems, respectively. The desiccant bed contained approximately 15 kg of silica-gel, with 3 mm average diameter. Results indicated that the pressure drop and the adsorption rate of desiccant column are usually higher than those of the desiccant wheel. The feasible and practical adsorption rate of desiccant wheel was 0.102 kgw/h at air flow rate 1.0 kg/min, regenerated air temperature of 55?C and at a wheel speed of 2.5 rpm. The humidity ratio of conditioning space and cooling load of split-type air conditioner was decreased to 0.002 kgw/kgda (14%) and 0.71 kWth (19.26%), respectively. Consequently, the thermal comfort was improved from 0.5 PMV (10.12% PPD) to 0.3 PMV (7.04% PPD).

An Energy-Saving Control Strategy on Central Air-Conditioning System

An energy-saving control strategy based on predictive control for central air-conditioning systems is proposed in this paper. The cold load model is developed to describe the dynamic characteristics of temperature control systems, and then parameters in the cold load model and in the central air-conditioning system model are estimated. Generalized predictive control (GPC) is used to establish an optimization model to minimize the consumption of energy and the control error of temperature. The simulated annealing (SA) algorithm, combined with quadratic programming, is adopted to solve the optimal problem. Contrasted with the simulation of traditional PID control, the results prove the effectiveness of this proposed strategy.

Application of Fuzzy Comprehensive Evaluation to Air-conditioning Competitive Power Analysis

As the conceptual design of air-conditioning is done using the theory of Quality Function Deployment (QFD),cus- tomer requirements should be understood and the product competitive power be analyzed as exactly as possible for new product de- signing.Lots of information in the process of this research is fuzzy and uncertain,but traditional QFD can not deal with it well. Fuzzy theory can solve the problem.So a fuzzy model for analyzing product competitive power is formulated in this paper to im- prove traditional QFD,after that it is applied to analyze air-conditioning competitive power.When air-conditioning competitive power is analyzed using this model,firstly the importance weight of the customer requirements o fair-conditioning is determined us- ing the Analytic Hierarchy Process (AHP) weighting process,then air-conditloning competitive power is evaluated using fuzzy comprehensive evaluation.It is proved that the model is feasible and has good applicability.

Application of Dual Throttling Air-Conditioning System to Explosion-Proof Frequency Converter

An explosion-proof dual throttling air-conditioning system was put forward to solve the heat dissipation and internal dewing problems of explosion-proof frequency converter in the underground coal mine. This study investigated the feasibility and benefits of explosion-proof dual throttling cooling and dehumidification air-conditioning system applied to the explosion-proof frequency converter. The physical model of dual throttling air-conditioning system was established and its performance parameter was described by mathematical method. The design calculation of the system has also been done. The experimental result showed that the system reached the steady state at the refrigeration mode after running 45 min, and the maximum internal temperature of the flame-proof cavity was 31.0 ℃. The system reached the steady state at the dehumidification mode after running 37 min. The maximum internal relative humidity and temperature of the flame-proof cavity were 33.4% and 36.3 ℃, respectively. Therefore, the proposed system had excellent ability of heat dissipation and avoided internal dewing. Compared with water cooling system, it was more energy-saving and economical. The airflow field of dual throttling air-conditioning system was also studied by CFD simulation. It was found that the result of CFD numerical simulation was highly consistent with the experimental data.

Simulation of Artificial Intelligence for Automotive Air-conditioning System

The artificial intelligence is applied to the simulation of the automotive air-conditioning system ( AACS )According to the system's characteristics a model of AACS, based on neural network, is developed. Different control methods of AACS are discussed through simulation based on this model. The result shows that the neural- fuzzy control is the best one compared with the on-off control and conventional fuzzy control method.It can make the compartment's temperature descend rapidly to the designed temperature and the fluctuation is small.

Analysis of Solar Direct-Driven Organic Rankine Cycle Powered Vapor Compression Cooling System Combined with Electric Motor for Office Building Air-Conditioning

Solar energy powered organic Rankine cycle vapor compression cycle(ORC-VCC)is a good alternative to convert solar heat into a cooling effect.In this study,an ORC-VCC system driven by solar energy combined with electric motor is proposed to ensure smooth operation under the conditions that solar radiation is unstable and discontinuous,and an office building located in Guangzhou,China is selected as a case study.The results show that beam solar radiation and generation temperature have considerable effects on the system performance.There is an optimal generation temperature at which the system achieves optimum performance.Also,as a key indicator,the cooling power per square meter collector should be considered in the hybrid solar cooling system in design process.Compared to the vapor compression cooling system,the hybrid cooling system can save almost 68.23%of electricity consumption.

Research on the Arrangement of Dew Point Temperature Detectors of Capillary Plane Radiation Air-Conditioning

Based on analysis of the reason and process of condensation on ceiling radiant cooling panels, two kinds of arrangement of detectors are put forward. The physical model is established, the results show that detectors are arranged as the form of triangle is more suitable. It can not only satisfy the use requirement but also it is economical and practical. Finally we can conclude that the inlet water temperature 0.5°C higher than dew point temperature is safe and reliable.

Analysis of Fresh Air Volume of Air-conditioning System for Railway Vehicles

The relevant standard requirements both in domestic and abroad provide the basis for designing air-conditioning system of railway vehicles present. However, there are great differences in the fresh air volume indicators among different standards requirements, and the requirements of each vehicle procurement contracts are also different. The design of air-conditioning become difficult above these. In this paper, the fresh air volume of different type railway vehicles is analyzed from health and equipment electricity consumption according to the railway vehicles air-conditioning system standard requirements in domestic and abroad. Some advises for designing air-conditioning system of railway vehicles through the fresh air volume calculation and comparison for domestic air-conditioning system of railway vehicles was provided.

A fully distributed robust optimal control approach for air-conditioning systems considering uncertainties of communication link in IoT-enabled building automation systems

Internet of Things(IoT)technologies are increasingly implemented in buildings as the cost-effective smart sens-ing infrastructure of building automation systems(BASs).They are also dispersed computing resources for novel distributed optimal control approaches.However,wireless communication networks are critical to fulfill these tasks with the performance influenced by inherent uncertainties in networks,e.g.,unpredictable occurrence of link failures.Centralized and hierarchical distributed approaches are vulnerable against link failure,while the robustness of fully distributed approaches depends on the algorithms adopted.This study therefore proposes a fully distributed robust optimal control approach for air-conditioning systems considering uncertainties of com-munication link in IoT-enabled BASs.The distributed algorithm is adopted that agents know their out-neighbors only.Agents directly coordinate with the connected neighbors for global optimization.Tests are conducted to test and validate the proposed approach by comparing with existing approaches,i.e.,the centralized,the hierarchical distributed and the fully distributed approaches.Results show that different approaches are vulnerable against to uncertainties of communication link to different extents.The proposed approach always guarantees the optimal control performance under normal conditions and conditions with link failures,verifying its high robustness.It also has low computation complexity and high optimization efficiency,thus applicable on IoT-enabled BASs.

Modelling method for air-conditioning usage behavior in multi-occupant office space based on group decision-making strategy

Occupant behavior largely influence the energy use within buildings.In the multi-occupant office,occupant behavior is affected by individual preference as well as the interaction among occupants,and yet no suitable model is available to precisely reflect the behavior characteristics.This paper proposed and introduced a method for innovative multi-occupant air-conditioning(AC)usage behavior modelling in a multi-occupant office,which used intuitionistic fuzzy preference relationship to describe individual behavior intention and a hierarchical structure to reflect the social relationship among multiple occupants through subjective evaluation method.The group decision-making process combined the individual behavior intention and the weights of occupants using the analytic hierarchy process.Then,the AC usage behavior of a multi-occupant office was simulated by integrating the multi-occupant model into designer’s simulation toolkit(DeST)building performance simulation software.The results of conducted analysis of a single office with multi-occupant showed that the proposed multi-occupant modelling method could quantitatively characterize the group relationships and AC usage behavior patterns.The absolute errors for the total AC operation time and frequency of the start-up periods of AC between the simulation and measurement results were only 2.7%and 2.0%,respectively.Thus,the proposed multi-occupant modelling method could realize a relatively accurate simulation of the multi-occupant behavior.

Room temperature and humidity decoupling control of common variable air volume air-conditioning system based on bilinear characteristics

Variable air volume(VAV)air-conditioning(AC)systems are widely employed to achieve a comfortable room thermal and humid environment depending on its better regulation performance and energy efficiency.In the single coil VAV AC system,conventional proportional-integral(PI)control algorithm is usually adopted to track the set-points of the room temperature and humidity by regulating the supply air flow rate and the chilled water flow rate,respectively.However,the control performance is usually not good due to the high coupling of the heat and mass transfer in the air-handling unit(AHU).A model-based control method is developed to realize the decoupling control of the room temperature and humidity according to the bilinear characteristics of the temperature and humidity variation.In this control method,a bilinear room temperature controller is used to track the room temperature set-point based on the real-time cooling load,while a room humidity controller is used to track the room humidity set-point depending on the real-time humidity load.The control performance was validated in a simulated VAV AC system.The test results show that comparing with the conventional PI control,the room temperature and humidity are controlled much more robustly and accurately by using the proposed model-based control method.

Deviation of design air-conditioning load based on weather database of reference weather year and actual weather year

In Japan,in order to determine the capacity of air-conditioning equipment,designers usually use the weather database of Reference Weather Year(RWY)to obtain the design air-conditioning load by using software such as New HASP/ACLD and Building Energy Simulation Tool(BEST)that are often used in Japan.In recent years,with the global warming due to climate change,the weather database used to calculate air conditioning load also changes.Thus,in order to determine an appropriate capacity of air-conditioning equipment for energy conservation of buildings,the deviation of design air-conditioning load calculated using the weather database of RWY and Actual Weather Year(AWY)should be discussed.In this paper,New HASP/ACLD was used to calculate the building heat loads of eight major Japanese cities over 30 years(1981-2010)between RWY and AWY.The heat load at an exceedance probability of 2.5%is defined as the design air-conditioning load in this paper.Comparing the design air-conditioning load obtained from RWY and AWY,it is shown that it is not necessarily the most appropriate when using the RWY to calculate the design air-conditioning load,especially for heating load in winter.Additionally,it is also shown that the annual heating load time ratio has decreased and the annual cooling load time ratio has increased over the 30 years.

Optimal air-conditioning load control in distribution network with intermittent renewables

The coordinated operation of controllable loads,such as air-conditioning load, and distributed generation sources in a smart grid environment has drawn significant attention in recent years. To improve the wind power utilization level in the distribution network and minimize the total system operation costs, this paper proposes a MILP(mixed integer linear programming) based approach to schedule the interruptible air-conditioning loads. In order to mitigate the uncertainties of the stochastic variables including wind power generation, ambient temperature change, and electricity retail price, the rolling horizon optimization(RHO) strategy is employed to continuously update the real-time information and proceed the control window. Moreover, to ensure the thermal comfort of customers, a novel two-parameter thermal model is introduced to calculate the indoor temperature variation more precisely. Simulations on a five node radial distribution network validate the efficiency of the proposed method.

Scenario analysis of hydrofluorocarbons emission reduction in China's mobile air-conditioning sector

With the Kigali Amendment(KA)coming into effect in China,the control of hydrofuorocarbons(HFCs)emissions has become more imperative.The mobile air-conditioning(MAC)sector is one of the important HFCs consumer sectors,and therefore studying its feasible mitigation paths and costs is of great significance to Chinas successful implementation of KA.This study used the bottom-up method with updated emission factors to re-evaluate the emission inventory of HFCs from the MAC sector in China from 2005 to 2020.The average annual growth rate of HFCs consumption in the MAC sector is 9.8%,and HFCs emissions have increased from 5.8(5.3-6.2)kt in 2005 to 22.2(20.6-23.8)kt in 2020,with an average annual growth rate of 8.8%.Using the Gompertz model combined with the Weibull function of vehicle survival rate,the ownership and new registrations of internal combustion engine vehicles(ICEVs)and electric vehicles(EVs)in China are predicted.The ownership of ICEVs and EVs is projected to be 310 million and 91 million in 2030,respectively and 2 million and 641 million in 2060,respectively.HFCs emissions in the MAC sector would reach 59.8(55.3-64.3)kt(80.093.0 Mt CO_(2-eq))in 2060 if without any control measure.To implement the KA,the cumulative of 1.6 Gt CO_(2-eq) emissions would be reduced.Under the other two accelerated mitigation scenarios,the MAC sector's HFCs will reach their emissions peak in 2028 and 2025 and achieve zero emissions in 2050 and 2046,respectively.Under the accelerated mitigation with recovery scenario,the cumulative emissions are only 15.0%of the business as usual(BAU)scenario.Using HFO-1234yf as the substitute,the unit abatement cost of the MAC sector is 27.3-37.4 USD _(t)^(-1)CO_(2-eq).

Quantification on the Effects of Liquid-Vapor Separation in Air-Conditioning System by using Advanced Exergy Analysis

Air-conditioning system consumes a large amount of electricity in residential sections,and its efficiency has drawn extensive concerns in energy-conscious era.Liquid-vapor separation is a heat transfer enhancement technology that can effectively improve the performance of the heat exchanger as well as the system.In this paper,a regular air-conditioning system as the baseline(system-A)and other two air-conditioning systems with liquid-vapor separation heat exchanger(system-B and system-C)are comparatively studied.The component behaviors and system performances are deeply explored by using advanced exergy analysis with a focus on quantifying how much consequences come from the variants,i.e.liquid-vapor separation.The results indicate that the system-B has large reduced exergy destruction from the compressor and condenser at cooling mode relative to the system-A.The system-C has mainly diminished exergy destruction in the compressor caused by other components relative to the system-B.At heating mode,the system-C has an enhanced system exergy efficiency of 9.6%over the system-A,and it also has the decreased avoidable exergy destruction which is dominantly contributed by the compressor and evaporator.Furthermore,it is found that liquid-vapor separation mainly benefits the compressor and outdoor heat exchanger where it locates,leading to the system performance improvements.

Auto-Tuning Parameters of Fractional PID Controller Design for Air-Conditioning Fan Coil Unit

The traditional integer order PID controller manipulates the air-conditioning fan coil unit(FCU)that offers cooliug and heatins loads to each air-conditioning room in summer and winter,respectivelv.In order to maintain a steady indoor temperature in summer and winter,the control quality cannot meet the related requirements of air-conditioning automation,such as large overshoot,large steady state error.long regulating time,etc.In view of these factors,this paper develops a fractional order PID controller to deal with such problem associated with FCU.Then,by varving mutation factor and crossover rate of basic differential evolution algorithmadaptivelv,a modified differential evolution algorithm(MDEA)is designed to tune the satisfactory values of five parameters of indoor temperature fractional order PID controller.This fractional order PID coutrol system is configured and the corresponding mumerical simulation is conducted by means of MATLAB software.The results indicate that the proposed fractional order PID control svstem and MDEA are reliable and the related control performance indexes meet with the related requirements of comfortable air-conditioning design and control criteria.

State space reconstruction of classic methods in air-conditioning dynamic load calculation

In actual air-conditioning systems,accurate calculation of dynamic loads is demandedfor the energy and materials saving and comfort control.At about the beginning of the1970s,researchers abroad developed the harmonic wave method(HWM),thermal responsefactor method(TRFM)and Z-transfer function method(ZTFM),and made greatachievements on the transition of air-conditioning loads calculation from steady methods