Analysis Method and Application of Multiple Antiquities Sources in the Shahejie Formation of the Paleogene in the Southern Bohai Sea

B Oilfield is the most representative mid to deep oil field in the Bohai Sea, with the main oil bearing intervals being the upper and middle Shahejie-3 sections of the Paleogene Shahejie Formation. Through the development of ancient landforms, characterization of material source channels, analysis of missing heavy mineral sources, and seismic reflection characteristics of multiple material source missing, the material sources of the middle and upper Shahejie-3 sections are analyzed. During the sedimentation period of the II oil formation in the middle section of the Shasan Formation, the study area was mainly dominated by the Kendong Uplift source rocks;During the sedimentation period of the I oil formation in the middle section of the Shasan Formation, there were three material sources in the study area, namely the Kendong Uplift, the Laibei Low Uplift, and the Weibei Uplift. The Kendong Uplift was the main material source, followed by the Laibei Low Uplift;During the sedimentation period of the Upper Shasan Formation, the study area still had three sources of material supply simultaneously. At this time, the Laibei Low Uplift was the main source area, while the Kendong Uplift and Weibei Uplift had a relatively small supply capacity for the study area. In the analysis of archaeological sources, the distribution characteristics of the sedimentary system in the third section of the Shahejie Formation have been clarified, providing a research basis for the later development and adjustment of the oilfield.

Source Mechanisms of Recent Earthquakes in Southern Saudi Arabia: Detecting of New Seismic Sources

Recently in 2020, in southern Saudi Arabia three felt earthquakes occurred in Asir region, in the Khamis Mushait, Ahad Rafidah, and AL-Shuqiq area, of magnitude 3.45, 3.1, and 3.5, respectively. The most interesting event was the earthquake that occurred in Khamis Mushait area, along a lake formed behind the Tadhah Dam (~7 km), fearing any damage to the dam’s body and the consequent destruction. Moment tensors for each event were computed for determining fault plane solutions, seismic moment, moment magnitude (Mw) and the CLVD ratio. In addition, the frequency contents in the waveforms of each event were identified. The obtained focal mechanisms represent different styles of faulting, normal movement with strike slip and strike slip with reverse. These tectonic movements on faults parallel to the Red Sea refer to the tensional forces due to the Red Sea rift system. These events occurred due to a natural tectonic movement, with considering the Khamis Mushait event as an induced event because of the lake behind the Dam. Many previous seismic hazard assessment studies have been conducted in southern Saudi Arabia without considering these recent seismic sources. Thus, our study provides new information related to detecting of new active seismic sources, which contributes to updating studies of seismic risk assessment in this region. In addition, our study pushes us to establish other additional seismic stations around these new seismic sources. This in turn will play a pivotal role in controlling seismic sources and then reassessing the seismic hazard in southern Saudi Arabia.

Characteristics of the Seismic Waves from a New Active Source Based on Methane Gaseous Detonation

Active seismic sources are critical for obtaining high resolution images of the subsurface.For active imaging in urban areas,environment friendly and green seismic sources are required.In present work,we introduce a new type of green active source based on the gaseous detonation of methane and oxygen.When fired in a closed container,the chemical reaction,i.e.gaseous detonation,will produce high pressure air over 150 MPa.Seismic waves are produced when high pressure air is quickly released to impact the surroundings.The first field experiment of this active source was carried out in December,2017 in Jingdezhen,Jiangxi Province,where a series of active sources were excited to explore their potential in mine exploration.In current work,we analyzed the seismic waves recorded by near-field accelerators and a dense short-period seismic array and compared them with those from a mobile airgun source,another kind of active source by releasing high pressure air into water.The results demonstrate that it can be used for high resolution near surface imaging.Firstly,the gaseous detonation productions are harmless CO2 and water,making it a green explosive source.Secondly,the dominant seismic frequencies are 10-80 Hz and a single shot can be recorded up to 15 km,making it suitable for local structure investigations.Thirdly,it can be excited in vertical wells,similar to traditional powder explosive sources.It can also act as an additional on-land active source to airgun sources,which requires a suitable water body as intermediate media to generate repeating signals.Moreover,the short duration and high frequency signature of the source signals make it safe with no damage to nearby buildings.These make it convenient to excite in urban areas.As a new explosive source,the excitation equipment and conditions,such as gas ratio,sink depth and air-releasing directions,need further investigation to improve seismic wave generation efficiency.

Active source monitoring at the Wenchuan fault zone:coseismic velocity change associated with aftershock event and its implication

With the improvement of seismic observation system, more and more observations indicate that earthquakes may cause seismic velocity change. However, the amplitude and spatial distribution of the velocity variation remains a controversial issue. Recent active source monitoring carried out adjacent to Wenchuan Fault Scientific Drilling （WFSD） revealed unambiguous coseismic velocity change associated with a local M8 5.5 earthquake. Here, we carry out forward modeling using two-dimensional spectral element method to further investigate the amplitude and spatial distribution of observed velocity change. The model is well constrained by results from seismic reflection and WFSD coring. Our model strongly suggests that the observed coseismic velocity change is localized within the fault zone with width of ~ 120 m rather than dynamic strong ground shaking. And a velocity decrease of -2.0 % within the fault zone is required to fit the observed travel time delay distribution, which coincides with rock mechanical experiment and theoretical modeling.

A GIS-based time-dependent seismic source modeling of Northern Iran

The first step in any seismic hazard study is the definition of seismogenic sources and the estimation of magnitude-frequency relationships for each source. There is as yet no standard methodology for source modeling and many researchers have worked on this topic. This study is an effort to define linear and area seismic sources for Northern Iran. The linear or fault sources are developed based on tectonic features and characteristic earthquakes while the area sources are developed based on spatial distribution of small to moderate earthquakes. Time-dependent recurrence relationships are developed for fault sources using renewal approach while time-independent frequency-magnitude relationships are proposed for area sources based on Poisson process. GIS functionalities are used in this study to introduce and incorporate spatial- temporal and geostatistical indices in delineating area seismic sources. The proposed methodology is used to model seismic sources for an area of about 500 by 400 square kilometers around Tehran. Previous researches and reports are studied to compile an earthquake/fault catalog that is as complete as possible. All events are transformed to uniform magnitude scale; duplicate events and dependent shocks are removed. Completeness and time distribution of the compiled catalog is taken into account. The proposed area and linear seismic sources in conjunction with defined recurrence relationships can be used to develop time-dependent probabilistic seismic hazard analysis of Northern Iran.

Application of passive source surface-wave method in site engineering seismic survey

Site engineering seismic survey provides basic data for seismic effect analysis. As an important parameter of soil, shear-wave velocity is usually obtained through wave velocity testing in borehole. In this paper, the passive source surface-wave method is introduced into the site engineering seismic survey and practically applied in an engineering site of Shijingshan District. By recording the ubiquitous weak vibration on the earth surface, extract the dispersion curve from the surface-wave components using the SPAC method and obtain the shear-wave velocity structure from inversion. Over the depth of 42 m under- ground, it totally consists of five layers with interface depth of 3.31, 4.50, 7.23, 17.41, and 42.00 m; and shear-wave velocity of 144.0, 198.3, 339.4, 744.2, and 903.7 m/s, respectively. The inversion result is used to evaluate site classification, determine the maximum shear modulus of soil, provide basis for further seismic hazard analysis and site assessment or site zoning, etc. The result shows that the passive source surface-wave method is feasible in the site engineering seismic survey and can replace boreholes,shorten survey period, and reduce engineering cost to some extent.

Active Source Seismic Identification and Automatic Picking of the P-wave First Arrival Using a Convolutional Neural Network

In seismic data processing,picking of the P-wave first arrivals takes up plenty of time and labor,and its accuracy plays a key role in imaging seismic structures.Based on the convolution neural network(CNN),we propose a new method to pick up the P-wave first arrivals automatically.Emitted from MINI28 vibroseis in the Jingdezhen seismic experiment,the vertical component of seismic waveforms recorded by EPS 32-bit portable seismometers are used for manually picking up the first arrivals(a total of 7242).Based on these arrivals,we establish the training and testing sets,including 25,290 event samples and 710,616 noise samples(length of each sample:2 s).After 3,000 steps of training,we obtain a convergent CNN model,which can automatically classify seismic events and noise samples with high accuracy(>99%).With the trained CNN model,we scan continuous seismic records and take the maximum output(probability of a seismic event)as the P-wave first arrival time.Compared with STA/LTA(short time average/long time average),our method shows higher precision and stronger anti-noise ability,especially with the low SNR seismic data.This CNN method is of great significance for promoting the intellectualization of seismic data processing,improving the resolution of seismic imaging,and promoting the joint inversion of active and passive sources.

Mining seismicity, gas outburst and the sig-nificance of their relationship in the study of physics of earthquake source

This paper presents an overview of mining seismicity, gas outburst and their origin. The internal relation of mining seismicity and gas outburst in the dynamic process is studied on the basis of the fact that these disasters sometimes occur simultaneously. The examples show a close relationship between mining seismicity and gas outburst in high gassy coal mines. It is proposed that strong mine shocks plus the response of low value and delay time are early warning signals. The mechanism of the relationship between mining seismicity and gas outburst is analyzed by using the location of mining shocks, focus mechanism, cause of mining shocks and conditions of gas outburst. The trigger action of gas fluid on mining shocks, especially the effect of the anomalous property of supercritical fluid on the preparation and occurrence of mining shocks is discussed. According to the similarity between mining-induced earthquakes and tectonic earthquakes in terms of mechanism, the significance of the above results in the study of physics of earthquake source is also discussed.

Active source seismic imaging on near-surface granite body:case study of siting a geological disposal repository for high-level radioactive nuclear waste

In order to research whether it is suitable to set a geological disposal repository for high-level radioactive nuclear waste into one target granite body,two active source seismic profles were arranged near a small town named Tamusu,Western China.The study area is with complex surface conditions,thus the seismic exploration encountered a variettraveltimey of technical difculties such as crossing obstacles,de-noising harmful scattered waves,and building complex near-surface velocity models.In order to address those problems,techniques including cross-obstacle seismic geometry design,angle-domain harmful scattered noise removal,and an acoustic wave equation-based inversion method jointly utilizing both the and waveform of frst arrival waves were adopted.The fnal seismic images clearly exhibit the target rock’s unconformable contact boundary and its top interface beneath the sedimentary and weathered layers.On this basis,it could be confrmed that the target rock is not thin or has been transported by geological process from somewhere else,but a native and massive rock.There are a few small size fractures whose space distribution could be revealed by seismic images within the rock.The fractures should be kept away.Based on current research,it could be considered that active source seismic exploration is demanded during the sitting process of the geological disposal repository for nuclear waste.The seismic acquisition and processing techniques proposed in the present paper would ofer a good reference value for similar researches in the future.

Seismological method for prediction of areal rockbursts in deep mine with seismic source mechanism and unstable failure theory

The research on the rock burst prediction was made on the basis of seismology,rock mechanics and the data from Dongguashan Copper Mine(DCM) ,the deepest metal mine in China.The seismic responses to mining in DCM were investigated through the analyses of the spatio-temporal distribution of hypocenters,apparent stress and displacement of seismic events,and the process of the generation of hazardous seismicity in DCM was studied in the framework of the theory of asperity in the seismic source mechanism.A method of locating areas with hazardous seismicity and a conceptual model of hazardous seismic nucleation in DCM were proposed.A criterion of rockburst prediction was analyzed theoretically in the framework of unstable failure theories,and consequently,the rate of change in the ratio of the seismic stiffness of rock in a seismic nucleation area to that in surrounding area,dS/dt,is defined as an index of the rockburst prediction.The possibility of a rockburst will increase if dS/dt>0,and the possibility of rock burst will decrease if dS/dt<0.The correctness of these methods is demonstrated by analyses of rock failure cases in DCM.

Seismic Geothermal Resource Exploration based on CPU/GPU Collaborative Parallel Prestack Time Migration

Geothermal resources exist in complex and comprehensive geological settings. In the current study, we proposed a CPU/GPU collaborative parallel prestack time migration methodology for geothermal resource exploration. First, seismic geological conditions in Xian County were obtained based on an analysis of drill cores for further seismic evaluation. Then,combined with the analysis of two-dimensional seismic data in the adjacent area, a test section with three seismic survey lines were designed to explore the geological structure of the study area. In the study area, the seismic data were derived through the multiple coverage reflection wave exploration method with explosive ignition in deep wells and high coverage frequency observations. Finally, we employed CPU/GPU collaborative parallel prestack time migration technology to analyze the obtained seismic data for geothermal resource evaluation. The favorable areas of karst fissure heat storage in Middle–Upper Proterozoic Jixianian and Paleozoic Cambrian–Ordovician rocks were inferred together with two preferred recommended exploration holes.

Probabilistic seismic hazard assessment of Nepal using multiple seismic source models

The potential for devastating earthquakes in the Himalayan orogeny has long been recognized. The 2015 MW7.8 Gorkha, Nepal earthquake has heightened the likelihood that major earthquakes will occur along this orogenic belt in the future. Reliable seismic hazard assessment is a critical element in development of policy for seismic hazard mitigation and risk reduction. In this study, we conduct probabilistic seismic hazard assessment using three different seismogenic source models(smoothed gridded, linear, and areal sources)based on the complicated tectonics of the study area. Two sets of ground motion prediction equations are combined in a standard logic tree by taking into account the epistemic uncertainties in hazard estimation. Long-term slip rates and paleoseismic records are also incorporated in the linear source model. Peak ground acceleration and spectral acceleration at 0.2 s and 1.0 s for 2% and 10%probabilities of exceedance in 50 years are estimated. The resulting maps show significant spatial variation in seismic hazard levels. The region of the Lesser Himalaya is found to have high seismic hazard potential. Along the Main Himalayan Thrust from east to west beneath the Main Central Thrust, large earthquakes have occurred regularly in history; hazard values in this region are found to be higher than those shown on existing hazard maps. In essence, the combination of long span earthquake catalogs and multiple seismogenic source models gives improved seismic hazard constraints in Nepal.

Seismic source ruptures of several strong earth-quakes of 1989 in Sichuan region of China

Several strong earthquakes occurred in the regions of Batang and Xiaojin of Sichuan Province in 1989. This paper uses broadband waveform data from GDSN, by the forward trial-and-error modeling for multiple subevent, in terms of analysis on quasi-source time function or qSTF of station, to study source rupture characteristics of these strong earthquakes and to discuss tectonic background of earthquake occurrence regions preliminarily.

Preface to the Special Issue on Advances in Seismic Exploration and Monitoring with Active Sources in China

Analyzing the information carriede by seismic waves is a major means for human beings to have an insight into the structure of the earth’s interior,and by using artificial seismic sources to excite seismic waves,we can obtain high-resolution images for the crustal and smaller scale medium.Artificial seismic exploration methods have been widely applied to fields such as

The thickness and structural characteristics of the crust across Tibetan plateau from active-sources seismic profiles

The Tibetan plateau as one of the youngest orogen on the Earth was considered as the result of continent-continent collision between the Eurasian and Indian plates. The thickness and structure of the crust beneath Tibetan plateau is essential to understand deformation behavior of the plateau. Active-source seismic profiling is most available geophysical method for imaging the structure of the continental crust. The results from more than 25 active-sources seismic profiles carried out in the past twenty years were reviewed in this article. A preliminary cross crustal pattern of the Tibetan Plateau was presented and discussed. The Moho discontinuity buries at the range of 60-80 km on average and have steep ramps located roughly beneath the sutures that are compatible with the successive stacking/accretion of the former Cenozoic blocks northeastward. The deepest Moho （near 80 km） appears closely near IYS and the crustal scale thrust system beneath southern margin of Tibetan plateau suggests strong dependence on collision and non-distributed deformation there. However, the -20 km order of Moho offsets hardly reappears in the inline section across northern Tibetan plateau. Without a universally accepted, convincing dynamic explanation model accommodated the all of the facts seen in controlled seismic sections, but vertical thickening and northeastern shorten of the crust is quite evident and interpretable to a certain extent as the result of continent-continent collision. Simultaneously, weak geophysical signature of the BNS suggests that convergence has been accommodated perhaps partially through pure-shear thickening accompanied by removal of lower crustal material by lateral escape. Recent years the result of Moho with -7 km offset and long extend in south-dip angle beneath the east Kunlun orogen and a grand thrust fault at the northern margin of Qilian orogen has attract more attention to action from the northern blocks. The broad lower-velocity area in the upper-middle crust of the Lhasa block was once considered as resulted from partially melted rocks. However the low normal vp/vs ratio and the Moho stepwise rise fail to support significant partial melting in the middle-lower crust of the central-northern Tibetan plateau. Furthermore, the lower-velocity of crust occasionally disappears, and/or local thinned exhibits their non-stationary spatial distribution.

On electro-acoustic characteristics of a marine broadband sparker for seismic exploration

The construction of major marine infrastructure projects and the exploration and development of deep-sea mineral resources require fine imaging of seabed strata and structures.The highresolution marine seismic exploration based on a high broadband sparker source is an important approach to reveal seabed stratum and reservoir structure,and identify geohazard.To optimize the performance of sparker seismic source,we investigated the electro-acoustic characteristics of spark discharge under conditions of different charging voltages and electrode numbers.Results show that the sound source level increased with the increase of the charging voltage,whereas the main frequency decreased when the charging voltage increases.In addition,it was found that the charging capacitance had more obvious influence on the main frequency than the sound source level did.Although the load energy decreased with increasing electrode number,the sound source level still increased but the main frequency decreased.Meanwhile,the primary to bubble(P/B)ratio increased with the increase of the electrode number.To gain a deeper insight into the electro-acoustic characteristics,we investigate the relationship between sound source level and power peak,from which a good correlation was observed.A more practical statistical analysis on the rise rate of current was processed,and a perfect logarithmic function was derived.Furthermore,we found that the main frequency was most possibly subjected to the electrical energy,especially the charging energy per electrode.The results indicate that the charging energy per electrode less than 10 J could increase the main frequency to above 300 Hz.At last,the main frequency could be reduced to 20 Hz when the charging energy of a single-electrode discharge was enhanced to over 4 kJ.This study shall be helpful in developing a sparker seismic source and improving the performance for marine engineering exploration and geohazard assessment.

Erratum to:A review of the wave gradiometry method for seismic imaging

Earthq Sci 2023(36):254-281 Doi:10.1016/j.eqs.2023.04.002 In the original version of this article,the important funding source was inadvertently omitted in Acknowledgement section.The corrected one is as follows.

Interrelation between seismicity parameters and delimiting potential seismic sources in a seismic statistical region and its influence on seismic risk estimation

In the paper, we have discovered the abnormal area distribution features of maximum variation values of ground motion parameter uncertainty with different probabilities of exceedance in 50 years within the range of 100°-120°E, 29°-42°N for the purpose to solve the problem that abnormal areas of maximum variation values of ground motion parameter uncertainties emerge in a certain cities and towns caused by seismicity parameter uncertainty in a seismic statistical region in an inhomogeneous distribution model that considers tempo-spatial nonuniformity of seismic activity. And we have also approached the interrelation between the risk estimation uncertainty of a site caused by seismicity parameter uncertainty in a seismic statistical region and the delimitation of potential sources, as well as the reasons for forming abnormal areas. The results from the research indicate that the seismicity parameter uncertainty has unequal influence on the uncertainty of risk estimation at each site in a statistical region in the inhomogeneous distribution model, which relates to the scheme for delimiting potential sources. Abnormal areas of maximum variation values of ground motion parameter uncertainty often emerge in the potential sources of Mu greater than or equal 8 (Mu is upper limit of a potential source) and their vicinity. However, this kind of influence is equal in the homogeneous distribution model. The uncertainty of risk estimation of each site depends on its seat. Generally speaking, the sites located in the middle part of a statistical region are only related to the seismicity parameter uncertainty of the region, while the sites situated in or near the juncture of two or three statistical regions might be subject to the synthetic influences of seismicity parameter uncertainties of several statistical regions.

Cepstrum analysis of seismic source characteristics

This paper introduces the concept of cepstrum. By investigating the difference in source characteristics between earthquakes and explosions the paper infers the manifestation of source difference in various variable domains, and seeks for effective means to express such source difference. Extending the approach of source discrimination from time and frequency domain to the cepstrum domain, the paper proposes a method of cepstrum analysis for recognizing the characteristics of seismic sources and establishes criteria for identifying the type of seismic sources. Cepstrum analysis on some recent earthquakes and explosions has been made, and the result shows that the method is quite effective in practice.

ComprehensiveanalysesofseismicsourcelayerinXingtaiandTangshanseismicregionsandtheconditionsofmediaab

Statistic analyses of sectional focal depth frequency relation for 1739 M S≥4.0 events in North China, 541 M S≥4.0 events in Xingtai seismic region and 999 M S≥4.0 events in Tangshan seismic region have been carried out for the first step of the study. Then the sectional focal depth frequency diagrams (H N diagram) for each region were obtained. The study shows that: (1) The intraplate earthquakes in North China occur within the continental crust, and are mainly concentrated within a certain depth range of the middle and upper crust, making up a seismic source layer; (2) The seismic source layer consists of a main layer and an auxiliary layer adjacent to it. The tops and bottoms of the main and auxiliary layers correspond to the G and C, as well as to B and G geologic boundaries respectively; (3) The H N diagrams for Xingtai and Tangshan seismic regions are significantly different from each other, indicating the regionality and localization of the seismic source layers; (4) DSS and MTS observations show that the regionality and localization of the seismic source layer depend mainly on the environment of the deep structures of the region; (5) The seismic source layer is a substance of medium layer, which can be related to the brittle ductile transition zone within the crust. The seismic source layer is also a stress conducting layer. As the media above and below this layer are subjected to failure or flowage, then the stress will concentrate in the stress conducting layer, in which the earthquake occurs.