The microstructure of the Al Ti alloy was studied.It was found that Al x Ti( x <5.0wt%) alloy consists of two phases,the solid solution of titanium in aluminum and the intermetallic compound Al 3Ti.The allo...The microstructure of the Al Ti alloy was studied.It was found that Al x Ti( x <5.0wt%) alloy consists of two phases,the solid solution of titanium in aluminum and the intermetallic compound Al 3Ti.The alloy was deformed by rolling and heat treated.The results show that the second phase precipitates are broken and refined in the matrix by large amount of cold work and crystalline grains are refined by annealing after the cold work.Deformation and heat treatment can improve the distribution of second phase of precipitates in the matrix to certain extent.展开更多
Aluminum-doped zinc oxide (ZnO:Al), abbreviated as ZAO, is a novel and widely used transparent conductive material. The ZAO powder was synthesized by chemical coprecipitation. The ZAO ceramic sputtering target mate...Aluminum-doped zinc oxide (ZnO:Al), abbreviated as ZAO, is a novel and widely used transparent conductive material. The ZAO powder was synthesized by chemical coprecipitation. The ZAO ceramic sputtering target materials were fabricated by sintering in air, and ZAO transparent conductive films were prepared by RF magnetron sputtering on glass substrates. XRD proved that such films had an orientation of (002) crystal panel paralleled to the surface of the glass substrate. The average transmittance of the films in the visible region exceeded 80%.展开更多
Ba-Al-S-Eu sputtering target for blue emitting phosphors was prepared by powder sintering method. XRD patterns showed that the main components of the target were barium tetra aluminum sulfide (BaAl4S7), bariutm sulf...Ba-Al-S-Eu sputtering target for blue emitting phosphors was prepared by powder sintering method. XRD patterns showed that the main components of the target were barium tetra aluminum sulfide (BaAl4S7), bariutm sulfide (BaS), and europium sulfide (EuS). In the samples, part of the barium and aluminum are formed into barium aluminum oxide (BaAl2O4) with the impurity element of oxygen. The PL characteristic spectra of the target showed the 470 nm blue emission obviously, and the Ba-Al-S thin films also transmitted a purple-blue emission at the position of 440 nm.The results indicated that this method was suitable for the fabrication of the Ba-Al-S:Eu sputtering target.展开更多
文摘The microstructure of the Al Ti alloy was studied.It was found that Al x Ti( x <5.0wt%) alloy consists of two phases,the solid solution of titanium in aluminum and the intermetallic compound Al 3Ti.The alloy was deformed by rolling and heat treated.The results show that the second phase precipitates are broken and refined in the matrix by large amount of cold work and crystalline grains are refined by annealing after the cold work.Deformation and heat treatment can improve the distribution of second phase of precipitates in the matrix to certain extent.
文摘Aluminum-doped zinc oxide (ZnO:Al), abbreviated as ZAO, is a novel and widely used transparent conductive material. The ZAO powder was synthesized by chemical coprecipitation. The ZAO ceramic sputtering target materials were fabricated by sintering in air, and ZAO transparent conductive films were prepared by RF magnetron sputtering on glass substrates. XRD proved that such films had an orientation of (002) crystal panel paralleled to the surface of the glass substrate. The average transmittance of the films in the visible region exceeded 80%.
基金supported by Provincial Natural Science Foundation of Beijing (3063022)
文摘Ba-Al-S-Eu sputtering target for blue emitting phosphors was prepared by powder sintering method. XRD patterns showed that the main components of the target were barium tetra aluminum sulfide (BaAl4S7), bariutm sulfide (BaS), and europium sulfide (EuS). In the samples, part of the barium and aluminum are formed into barium aluminum oxide (BaAl2O4) with the impurity element of oxygen. The PL characteristic spectra of the target showed the 470 nm blue emission obviously, and the Ba-Al-S thin films also transmitted a purple-blue emission at the position of 440 nm.The results indicated that this method was suitable for the fabrication of the Ba-Al-S:Eu sputtering target.