Selective Laser Melting(SLM),one of the metal additive manufacturing methods in the powder bed,is frequently used in the production of 316L stainless steel biomaterial.In this study,the effect of duplex surface modifi...Selective Laser Melting(SLM),one of the metal additive manufacturing methods in the powder bed,is frequently used in the production of 316L stainless steel biomaterial.In this study,the effect of duplex surface modification(metal additive manufacturing and plasma oxidizing)on the corrosion resistance of 316L was investigated.Ti6Al4V layer was formed by additive manufacturing on 316L produced by selective laser melting method.The obtained layered Ti6Al4V/316L samples were oxidized by plasma at 650℃–750℃ and 1 h–4 h parameter conditions.TiO_(2)ceramic layer was formed on the Ti6Al4V/316L structure by plasma oxidation process in several layer thicknesses.Corrosion properties of the TiO_(2)layer were determined by Open Circuit Potential(OCP),potentiodynamic polarization,and Electrochemical Impedance Spectroscopy(EIS)tests in Simulated Body Fluid(SBF)solution.Also,the surface characterizations of the samples were determined by the Vickers micro-hardness tester,Scanning Electron Microscopy(SEM),and X-Ray Diffractometer(XRD)analysis.From the results,it was obtained that the corrosion resistance of the plasma oxidized was higher than the untreated 316L and layered Ti6Al4V/316L samples.The best corrosion resistance was obtained under the 750℃ and 4 h parameter conditions because of the increasing plasma oxidizing time and temperature.展开更多
基金the Erzurum Technical University High Technology Research and Application Centre(ETÜ-YÜTAM)for their valuable contribution.
文摘Selective Laser Melting(SLM),one of the metal additive manufacturing methods in the powder bed,is frequently used in the production of 316L stainless steel biomaterial.In this study,the effect of duplex surface modification(metal additive manufacturing and plasma oxidizing)on the corrosion resistance of 316L was investigated.Ti6Al4V layer was formed by additive manufacturing on 316L produced by selective laser melting method.The obtained layered Ti6Al4V/316L samples were oxidized by plasma at 650℃–750℃ and 1 h–4 h parameter conditions.TiO_(2)ceramic layer was formed on the Ti6Al4V/316L structure by plasma oxidation process in several layer thicknesses.Corrosion properties of the TiO_(2)layer were determined by Open Circuit Potential(OCP),potentiodynamic polarization,and Electrochemical Impedance Spectroscopy(EIS)tests in Simulated Body Fluid(SBF)solution.Also,the surface characterizations of the samples were determined by the Vickers micro-hardness tester,Scanning Electron Microscopy(SEM),and X-Ray Diffractometer(XRD)analysis.From the results,it was obtained that the corrosion resistance of the plasma oxidized was higher than the untreated 316L and layered Ti6Al4V/316L samples.The best corrosion resistance was obtained under the 750℃ and 4 h parameter conditions because of the increasing plasma oxidizing time and temperature.
