In this article, semi-solid AlSiTMg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature and stirring power on the microstructure of the AISiTMg allo...In this article, semi-solid AlSiTMg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature and stirring power on the microstructure of the AISiTMg alloy slurry were studied. The results showed that the semi-solid AISiTMg alloy slurry, 127 mm in diameter, could be prepared by using the low superheat pouring and weak electromagnetic stirring technology and this new technology could save energy and make the pouring process convenient. When the liquid AISiTMg alloy was poured at 650℃ or 630℃, the solidified micrastructure of the AISiTMg alloy slurry, prepared by weak electromagnetic stirring, was remarkably improved when compared with that of the slurry prepared without stirring. The primary α-Al grains appeared rosette-like or spherical. When the pouring temperature was decreased, the shape of the primary α-Al grains gradually changed from dendritic-like grains to spherical grains. When the pouring temperature was appropriately increased, that is, raised to a certain superheat, the pouring process became easier and an ideal spherical microstructure of the AISiTMg alloy slurry, prepared by weak electromagnetic stirring, could also be obtained. In this experiment, when the stirring power was 0.36 kW, the optimized pouring temperature parameter was 630 ℃. When the AISiTMg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring, the pouring temperature was 630℃. Increasing the stirring power appropriately could gain better spherical primary α-Al grains, but if the stirring power was increased to a certain value, the shape of the primary α-Al grains did not improve further. In this experiment, the optimized stirring power parameter was 0.36 kW.展开更多
文摘In this article, semi-solid AlSiTMg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature and stirring power on the microstructure of the AISiTMg alloy slurry were studied. The results showed that the semi-solid AISiTMg alloy slurry, 127 mm in diameter, could be prepared by using the low superheat pouring and weak electromagnetic stirring technology and this new technology could save energy and make the pouring process convenient. When the liquid AISiTMg alloy was poured at 650℃ or 630℃, the solidified micrastructure of the AISiTMg alloy slurry, prepared by weak electromagnetic stirring, was remarkably improved when compared with that of the slurry prepared without stirring. The primary α-Al grains appeared rosette-like or spherical. When the pouring temperature was decreased, the shape of the primary α-Al grains gradually changed from dendritic-like grains to spherical grains. When the pouring temperature was appropriately increased, that is, raised to a certain superheat, the pouring process became easier and an ideal spherical microstructure of the AISiTMg alloy slurry, prepared by weak electromagnetic stirring, could also be obtained. In this experiment, when the stirring power was 0.36 kW, the optimized pouring temperature parameter was 630 ℃. When the AISiTMg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring, the pouring temperature was 630℃. Increasing the stirring power appropriately could gain better spherical primary α-Al grains, but if the stirring power was increased to a certain value, the shape of the primary α-Al grains did not improve further. In this experiment, the optimized stirring power parameter was 0.36 kW.
