Interaction mechanism of cyanide with pyrite during the cyanidation of pyrite and the decyanation of pyrite cyanide residues by chemical oxidation

The toxic cyanides in cyanide residues produced from cyanidation process for gold extraction are harmful to the environment.Pyrite is one of the main minerals existing in cyanide residues.In this work,the interaction of cyanide with pyrite and the decyanation of pyrite cyanide residue were analyzed.Results revealed that high pH value,high cyanide concentration,and high pyrite dosage promoted the interaction of cyanide with pyrite.The cyanidation of pyrite was pseudo-second-order with respect to cyanide.The decyanation of pyrite cyanide residue by Na_(2)SO_(3)/air oxidation was performed.The cyanide removal efficiency was 83.9% after 1 h of reaction time under the optimal conditions of pH value of 11.2,SO_(3)^(2-) dosage of 22 mg·g^(-1),and air flow rate of 1.46 L·min^(-1).X-ray photoelectron spectroscopy analysis of the pyrite samples showed the formation of Fe(Ⅲ)and FeSO_(4) during the cyanidation process.The cyanide that adsorbed on the pyrite surface after cyanidation mainly existed in the forms of free cyanide(CN^(-))and ferrocyanide(Fe(CN)_(6)^(4-)),which were effectively removed by Na_(2)SO_(3)/air oxidation.During the decyanation process,air intake promoted pyrite oxidation and weakened cyanide adsorption on the pyrite surface.This study has practical significance for gold enterprises aiming to mitigate the environmental impact related to cyanide residues.

Beneficiation and Characterization of Gold from Itagunmodi Gold Ore by Cyanidation

This paper has reported the beneficiation and characterization of gold from Itagunmodi gold ore in Atakumosa West LGA in the State of Osun Nigeria using cyanide solution obtained from cassava and commercially available sodium cyanide analar grade. Cyanide solution extracted from cassava variety TMS 30572 leaves obtained from Obafemi Awolowo University (O.A.U) Research and Teaching Farm was discovered to have the highest free cyanide (CN-) among the ten different cassava varieties evaluated. The samples were exposed to varied concentrations from 0.25% to 2.00% CN at intervals of 0.25% CN from cyanide solution obtained from cassava and commercially available sodium cyanide analar grade. The result showed that after 24 hours of cyanidation and concentration of 2% CN- on 10 g gold ore concentrate, the analar grade sodium cyanide yielded 0.123 g of gold while the cassava based cyanide yielded 0.098 g. The cyanidation performance of analar grade sodium cyanide is greater than cassava based cyanide by a difference of 0.25%.

Copper and Cyanide Recovery in Cyanidation Effluents

Cyanidation is the main process for gold and silver recovery from its ores. In this study, a process is proposed to recover copper and cyanide from barren solutions from the Merrill-Crowe cementation process with zinc dust. This technology is based on inducing nucleated precipitation of copper and silver in a serpentine reactor, using sodium sulfide as the precipitator, and sulfuric acid for pH control. Results show that pH value has a significant effect on copper cyanide removal efficiency, and it was determined the optimal pH range to be 2.5 - 3. At this pH value, the copper cyanide removal efficiency achieved was up to 97 and 99%, when copper concentration in the influent was 636 and 900 ppm. respectively. In this process (sulphidization-acidification-thickening-HCN recycling), the cyanide associated with copper cyanide complexes, is released as HCN gas under weakly acidic conditions, allowing it to be recycled back to the cyanidation process as free cyanide. Cyanide recovery was 90%. Finally, this procedure was successfully run at Minera William in México.

Use of ferricyanide for gold and silver cyanidation

Low gold and silver leaching kinetics has been commonly observed in traditional gold-silver cyanidation process, especially in heap leaching and in situ leaching operations. The different mineralogy of gold and silver in the ores is suspected to be the main reason, e.g., the occurrence of low solubility acanthite (Ag2S) typically results in low overall silver extraction. Due to the low solubility of oxygen in cyanide solution, the reactivity and availability of oxidant is believed to be the critical limitation for gold and silver dissolution. The use of ferricyanide as the auxiliary oxidant for gold and silver cyanidation has been examined. The rotating disc test results prove the assistant effect of ferricyanide on increasing the dissolution rate of gold and silver. The potential use of ferricyanide in gold/silver cyanidation process is proposed based on the leaching results of actual ores.

Cyanidation of gold clay ore containing arsenic and manganese

The extraction process of gold and silver from the gold clay ore containing arsenic and manganese was investigated.With the conventional technique,the leaching rates of gold and silver are 78.23%and 49.02%,respectively.To eliminate the negative effects of arsenic and manganese on cyanidation and increase the gold and silver leaching rates,a novel catalyst was added.The content of the catalyst used in the process was 8 g per 500 g org sample,the sample size was 60μm and the pH value was kept between 10 and 11.Leaching with the catalyst for 3-5 h under certain conditions,the gold leaching rate increased to over 90%and the silver leaching rate increased to 80%-90%.The catalyst can effectively liberate gold and silver from the enclosure of arsenic and manganese and the industrial experiment has great significance to the development and utilization of the gold clay ore containing arsenic and manganese.

Impact of silver sulphides on gold cyanidation with polymetal sulphides

Gold leaching was influenced in association with silver and polymetal sulphide minerals.A packed bed was adopted to single out the galvanic and passivation effects with four sets of minerals:pyrite?silica,chalcopyrite?silica,sphalerite?silica and stibnite?silica.Pyrargyrite enhanced Au recovery to 77.3%and 51.2%under galvanic and passivation effects from pyrite(vs 74.6%and 15.8%).Pyrargyrite in association with sphalerite also enhanced Au recovery to 6.6%and 51.9%(vs 1.6%and 15.6%)under galvanic and passivation effects from sphalerite.Pyrargyrite associated with chalcopyrite retarded gold recovery to 38.0%and 12.1%(vs 57%and 14.1%)under galvanic and passivation effects.Accumulative silver minerals enhanced Au recovery to 90.6%and 81.1%(vs 74.6%and 15.8%)under galvanic and passivation impacts from pyrite.Silver minerals with sphalerite under galvanic and passivation effects enhanced Au recovery to 71.1%and 80.5%(vs 1.6%and 15.6%).Silver minerals associated with chalcopyrite retarded Au recovery to 10.2%and 4.5%under galvanic and passivation impacts(vs 57%and 14.1%).Stibnite retarded Au dissolution with pyrargyrite and accumulative silver minerals.Pyrargyrite and accumulative silver enhanced gold dissolution for free gold and gold associated with pyrite and sphalerite.Gold dissolution was retarded for gold and silver minerals associated with chalcopyrite and stibnite.

DISSOLUTION KINETICS OF GOLD AND SILVER IN CYANIDATION

The dissolution kinetics of gold and silver cyanidation of Cu-Au sulfide concentrate has been investigated at ambient temperature in consideration of effects of various parameters,such as particle size of ores,hydrodyna.mics of the process and initial cyanide concentration as well as oxygen partial pressure.The experimental data are mathematically treated with an approach based on the shrinking core model.A phenomenological expression describing the rate and rate constants for cyanidation of the concentrate is developed from the treatment.The dissolution of gold and silver is explained by an electrochemical mechanism in which the rate determining step is,the diffusion of cyanide and dissolved molecular oxygen through a porous layer formed during the minerals dis-solutions.

Effect of Pretreatment of Sulfide Refractory Concentrate with Sodium Hypochlorite, Followed by Extraction of Gold by Pressure Cyanidation, on Gold Removal

The majority of the refractory gold and silver occurs in occlusion in sulphides, then precious metal dissolution is possible by first oxidizing auriferous sulfide concentrate using sodium hypochlorite-sodium-hydroxide solution followed of pressure cyanidation of the oxidized concentrate, for the extraction of precious metals. This process was conducted and evaluated under cyanide and oxygen pressure. This versatile approach offers many advantages, including low temperatures, low pressure and less costly materials of construction than conventional pressure oxidation. In this study, the effect of oxygen pressure, concentration of sodium hypochlorite, temperature, and initial pH, in precious metals recovery and As removal were evaluated using a 24 factorial design. Characterization of the ores showed that pyrite and arsenopyrite were the main minerals present on the concentrate. The best results for gold extraction were obtained with oxygen pressure of 80 psi, 10% (w/w) sodium hypochlorite, temperature of 80℃, at pH = 13, and a constant stirring speed of 600 rpm. These conditions allowed an approximated 60% of gold and 90% of silver extractions in 1 hr.

Clinical Case Report of Acute Heart Injury and Acute Rhabdomyolysis Due to Cyanide Poisoning

Cyanide poisoning is one of the most dangerous poisonings, and it can be absorbed into the body through the mouth, inhalation and through the skin. A 32-year-old female patient was admitted to our poison control center because of high fever, severe vomiting, and seizures. Physical examination found that the patient was drowsy, had a high fever of 40 degrees Celsius, pulse of 140 beats/minute, and increased tendon and bone reflexes. Exploiting the patient’s information, it was discovered that the patient bought Cyanide to drink with the intention of committing suicide. The patient was quickly treated with gastric lavage and activated charcoal. Echocardiography recorded EF: 35%, reduced movement of the entire myocardium. CK blood test: 4562 U/L. The patient’s condition rapidly deteriorated and the patient was made ECMO, IHD and CVVHDF. After 3 days of treatment, the patient’s condition did not improve, so the family asked for the patient to go home. This article aims to describe the rapidly progressing and severe damage to the heart and muscles of patients with cyanide poisoning.

Fe extraction from high-silicon and aluminum cyanide tailings by pretreatment of water leaching before magnetic separation

Pretreatment of high content of Si- and Al-containing cyanide tailings by water leaching to remove some impurities, such as the major impurities minerals of Si and A1, as well as its effect on Fe extraction in the water leaching process was investigated. The effects of different parameters on iron recovery were studied, and the reaction parameters were proposed as follows： sodium carbonate content of 30%, water leaching at 60 ~C for 5 min, liquid/solid ratio of 15：1, and exciting current of 2 A. Under these optimal conditions, magnetic concentrate containing 59.11% total iron and a total iron recovery rate of 76.12% was obtained. In addition, the microstructure and phase transformation of the process of water leaching were studied by X-ray powder diffraction technique （XRD）, Electronic image of backscattering （BEI）, X-ray fluorescence （XRF）, and energy dispersive spectrometry （EDS）. The results indicate that the soluble compound impurities generated in the roasting process are washed out, and the dissoluble substances enter into nonmagnetic materials by water leaching, realizing the effective separation of impurities and Fe.

TDDFT Study on Different Sensing Mechanisms of Similar Cyanide Sensors Based on Michael Addition Reaction

The solvents and substituents of two similar fluorescent sensors for cyanide, 7-diethylamino- 3-formylcoumarin （sensor a） and 7-diethylamino-3-（2-nitrovinyl）coumarin （sensor b）, are proposed to account for their distinct sensing mechanisms and experimental phenomena. The time-dependent density functional theory has been applied to investigate the ground states and the first singlet excited electronic states of the sensor as well as their possible Michael reaction products with cyanide, with a view to monitoring their geometries and photophysieal properties. The theoretical study indicates that the protic water solvent could lead to final Michael addition product of sensor a in the ground state, while the aprotic acetonitrile solvent could lead to carbanion as the final product of sensor b. Furthermore, the Michael reaction product of sensor a has been proved to have a torsion structure in its first singlet excited state. Correspondingly, sensor b also has a torsion structure around the nitrovinyl moiety in its first singlet excited state, while not in its carbanion structure. This could explain the observed strong fluorescence for sensor a and the quenching fluorescence for the sensor b upon the addition of the cyanide anions in the relevant sensing mechanisms.

Application of ferrate(VI) in the treatment of industrial wastes containing metal-complexed cyanides : A green treatment

Ferrate（VI） was employed for the oxidation of cyanide （CN） and simultaneous removal of copper or nickel in the mixed/complexed systems of CN-Cu, CN-Ni, or CN-Cu-Ni. The degradation of CN （1.00 mmol/L） and removal of Cu （0.095 mmol/L） were investigated as a function of Fe（Ⅵ） doses from 0.3-2.00 mmol/L at pH 10.0. It was found that Fe（Ⅵ） could readily oxidize CN and the reduction of Fe（Ⅵ） into Fe（Ⅲ） might serve efficiently for the removal of free copper ions. The increase in Fe（Ⅵ） dose apparently favoured the CN oxidation as well as Cu removal. Moreover, the pH dependence study （pH 10.0-13.0） revealed that the oxidation of CN was almost unaffected in the studied pH range （10.0-13.0）, however, the maximum removal efficiency of Cu was obtained at pH 13.0. Similarly, treatment was carded out for CN-Ni system having the initial Ni concentration of 0.170 mmol/L and CN concentration of 1.00 mmol with Fe（Ⅵ） dose 2.00 mmol at various pH values （10.0-12.0）. Results showed a partial oxidation of CN and partial removal of Ni. It can be observed that Fe（Ⅵ） can partially degrade the CN-Ni complex in this pH range. Further, Fe（Ⅵ） was applied for the treatment of simulated industrial waste/effluent waters treatment containing CN, Cu, and Ni.

Treatment of copper-rich gold ore by cyanide leaching, ammonia pretreatment and ammoniacal cyanide leaching

The treatment of a copper sulphide-bearing gold ore by direct cyanide leaching, ammonia pretreatment and ammoniacal cyanide leaching was investigated. Dissolution behaviour of gold and copper in these leaching systems was demonstrated. Severe interference by the copper containing sulphides with cyanide leaching of gold is observed at p（NaCN）〈5 g/L. This is consistent with speciation calculations. Ammonia pretreatment is shown to readily eliminate the copper interference, allowing almost complete extraction of gold with concomitantly low reagent consumption in subsequent cyanide leaching. In ammoniacal cyanide system, Box-Behnken experimental design shows the main and interaction effects of NH3, NaCN and Pb（NO3）2. The concentrations of NH3 and NaCN are statistically confirmed to be significant factors affecting extraction of gold while the effect of Pb（NO3）2 is limited. Increasing the concentration of NH3 improves the selectivity and extent of gold extraction and reduces the cyanide consumption. The contribution of reagent interactions to gold extraction is statistically insignificant. These findings highlight that ammonia pretreatment and ammonia-cyanide leaching are promising approaches for the treatment of gold ores with high copper sulphide content.

Highly active double metal cyanide complexes: Effect of central metal and ligand on reaction of epoxide/CO2

Various novel double metal cyanide （DMC） catalysts were successfully prepared by modifying the central metal （M） and one of cyanide ion （CN-） in Zna[M（CN）b]c complex. Such modifications have significant impact on the catalytic efficiency as well as the polymer selectivity for the reaction of PO/CO2. Zn-Ni（Ⅱ） DMC is a potential catalyst for alternating copolymerization of PO/CO2,and DMC catalysts based on Zn3[Co（CN）5X]2 （X = Br^- and N3^-） exhibit moderate efficiency for the production of polycarbonates.This research presents the preliminary exploration of novel DMC complex via chemical modification of its central metal and ligand.

Granular activated carbons from palm nut shells for gold di-cyanide adsorption

Granular activated carbons were produced from palm nut shells by physical activation with steam. The proximate analysis of palm nut shells was investigated by thermogravimetric analysis, and the adsorption capacity of the activated carbons, produced as a result of shell pyrolysis at 600℃ followed by steam activation at 900℃ in varying activation times, was evaluated using nitrogen adsorption at 77 K. Applicability of the activated carbons for gold dicyanide adsorption was also investigated. Increasing the activation hold time with the attendant increase in the degree of carbon burn-off results in a progressive increase in the surface area of the activated carbons, reaching a value of 903.1 m2/g after activation for 6 h. The volumes of total pores, mieropores, and mesopores in the activated carbons also increase progressively with the increasing degree of carbon burn-off, resulting from increasing the activation hold time. The gold di-cyanide adsorption of the activated carbons increases with the rise of pore volume of the activated carbons. The gold di-cyanide adsorption of palm nut shell activated carbon obtained after 6-h activation at 900℃ is superior to that of a commercial activated carbon used for gold di-cyanide adsorption.

Efficient destruction of sodium cyanide by thermal decomposition with addition of ferric oxide

Efficient destruction of cyanide by thermal decomposition with ferric oxide addition was proposed. The mechanism of destruction of sodium cyanide with or without ferric oxide addition under various conditions was examined by XRD, DSC-TG, and chemical analysis technologies. In the absence of ferric oxide, sodium cyanide decomposes at 587.4 ℃ in air and 879.2 ℃ in argon atmosphere. In the presence of ferric oxide, about 60% of sodium cyanide decomposes at 350 ℃ for 30 min in argon, while almost all sodium cyanide decomposes within 30 min in air or O2 with mass ratio of ferric oxide to sodium cyanide of 1:1. The increase of ferric oxide addition, temperature, and heating time facilitates the destruction of sodium cyanide. It is believed that with ferric oxide addition, NaCN reacts with Fe2O3 to form Na4Fe(CN)6, Na2CO3, NaNO2 and Fe3O4 in argon. NaCN decomposes into NaCNO, Na4Fe(CN)6, minor NaNO2, and the formed NaCNO and Na4Fe(CN)6 further decompose into Na2CO3, CO2, N2, FeOx, and minor NOx in air or O2.

Mechanism of sodium sulfide on flotation of cyanide-depressed pyrite

The mechanism of sodium sulfide(Na2S)on the flotation of cyanide-depressed pyrite using potassium amyl xanthate(PAX)as collector was investigated by flotation test and electrochemical measurements.The flotation results show that both PAX and Na2S can promote the flotation recovery of cyanide-depressed pyrite and their combination can further improve the pyrite flotation recovery.Electrochemical measurements show that PAX and Na2S interacted with cyanide-depressed pyrite through different mechanisms.PAX competed with cyanide and was adsorbed on the pyrite surface in the form of dixanthogen,thus enhancing the hydrophobicity and flotation of cyanide-depressed pyrite.Unlike PAX,Na2S rendered the pyrite surface hydrophobic through the reduction of ferricyanide species and the formation of elemental sulfur S0 and polysulfide Sn2-.The combined application of PAX and Na2S induced superior pyrite flotation recovery because of a synergistic effect between PAX and Na2S.

Effect of Pre-treatment of α-Ketoglutarate on Cyanide-induced Toxicity and Alterations in Various Physiological Variables in Rodents

Objective To investigate the effects of pre-treatment of α-ketoglutarate （α-KG） on cyanide-induced lethality and changes in various physiological parameters in rodents. Methods The LD50 of potassium cyanide （KCN） given orally （po）, intraperitoneally （ip）, subcutaneously （sc） or intravenously （iv） was determined in male mice, in the presence or absence α-KG given po, ip or iv. α-KG was administered 10, 20 or 40 min prior to KCN at 0.50, 1.0 or 2.0 g/kg by po or ip route, and at 0.10, 0.20 or 0.40 g/kg by iv route. Protection index （PI） was calculated as the ratio of LD50 of KCN in the presence of α-KG （protected animals） and LD50 of KCN in the absence of α-KG （unprotected animals）. In a separate experiment, several physiological variables viz. mean arterial pressure （MAP）, heart rate （HR）, respiratory rate （RR）, neuromuscular transmission （NMT） and rectal temperature （RT） were measured in anesthetized female rats pre-treated （-10 rain） with po （2.0 g/kg） or iv （0.125 g/kg） α-KG and then administered sub-lethal （0.75 LD50） or lethal （2.0, 4.0 or 8.0 LD50） doses of KCN （po）. Results PI of 4.52, 6.40 and 7.60 at -10 min, 3.20, 5.40 and 6.40 at -20 min, and 1.40, 3.20 and 5.40 at -40 min of po administration with α-KG was observed for 0.50, 1.0 and 2.0 g/kg doses, respectively, against KCN given by po route. When KCN was given ip, a PI of 3.38, 4.79 and 5.70 was observed for 0.50, 1.0 and 2.0 g/kg α-KG given ip （-10 min）, respectively. A lower PI of 3.37, 2.83 and 2.38 was observed when KCN given sc was challenged by 2.0 g/kg α-KG given ip at -10, -20 or -40 min, respectively. Similarly, a PI of 3.37, 2.83 and 2.0 was noted when KCN given sc was antagonized by 2.0 g/kg α-KG given po at -10, -20 or -40 rain, respectively. No appreciable protection was observed when lower doses of α-KG （ip or po） challenged KCN given by sc route. Pre-treatment of iv or po administration of α-KG did not afford any protection against KCN given po or iv route. Oral treatment of 0.75 LD50 KCN caused significant decrease in MAP and HR after 15 min, RR after 30 min and NMT after 60 min. There was no effect on RT. No reduction in MAP, HR, RR and RT was observed when rats received 2.0 or 4.0 LD50 KCN after pre-treatment of α-KG （po; 2.0 g/kg）. However, no protection was observed on NMT. Protective efficacy of α-KG was not observed on MAP, HR, RR, and NMT decreased by 8.0 LD50 KCN. Decrease in MAP and NMT caused by 2.0 LD50 KCN （po） was resolved by iv administration of α-KG Conclusions Cyanide antagonism by α-KG is best exhibited when both α-KG and KCN are given by po route. The protective effect of α-KG on cyanide-induced changes in several physiological parameters also indicates a promising role of α-KG as an alternative cyanide antidote.

Study on Gold (Ⅰ) Solvent Extraction from Alkaline Cyanide Solution by TBP with Addition of Surfactant

The new solvent extraction system for gold() from alkaline cyanide solution by TBP with addition of surfactant in aqueous phase was studied. The effect of various factors, such as equilibrium pH, constitution of organic phase, molar ratio of CPBAu(CN)2-, extraction time, aqueous/organic phase ratio, different initial gold concentration, equilibrium temperature, different diluent, different types of extractants and surfactants etc., was inspected. The results show that gold() can be extracted quantitatively by controlling the quantity of surfactant (CPB); both the equilibrium pH and diluent hardly influence percent extraction. Gold() percent extraction reaches more than 98% under the optimal experimental conditions. 30% vol TBP diluted by sulphonating kerosene can load gold() to rather high levels. Loading capacity is in excess of 38 g/L. The extraction mechanism is discussed and the overall extraction reaction is deduced.

Greener approach towards the facile synthesis of 1,4-dihydropyrano[2,3-c]pyrazol-5-y1 cyanide derivatives at room temperature

This report describes triethylammonium acetate （TEAA） ionic liquid catalyzed one pot synthesis of 6-amino-4-aryl-5-cyano-3- methyl-1-phenyl-1,4-dihydropyrano [2,3-c]pyrazoles by the reaction of aromatic aldehyde, malononitrile and 3-methyl-1-phenyl-2- pyrazolin-5-one at room temperature. TEAA plays dual role as reaction media and catalyst. It can also be easily recovered and reused in several runs. TEAA provides greener reaction protocol to present methodology which obviates the need of organic solvents, expensive and toxic catalyst.