Based on the survey of international emissions trading system （ETS） and quantitative analysis, policy suggestions on establishing a carbon ETS in China are presented in this study. Sectors sensitive to carbon prices...Based on the survey of international emissions trading system （ETS） and quantitative analysis, policy suggestions on establishing a carbon ETS in China are presented in this study. Sectors sensitive to carbon prices, e.g., the power generation sector and the iron and steel industry, are given priority to be covered by the ETS. Interregional carbon trading should be carried out as early as possible. The cap of the ETS should be based on China＇s carbon intensity reduction target with the floor carbon price for the market being set in the beginning. Suggestions on the infrastructure of ETS are also proposed, including the national wide carbon measuring, reporting, verification system building. account registration system and the legislation to national展开更多
Electrochemical machining(ECM)is an economical and effective method for blisk manufacturing and includes two steps:channel machining and profile machining.The allowance distribution after the channel machining will di...Electrochemical machining(ECM)is an economical and effective method for blisk manufacturing and includes two steps:channel machining and profile machining.The allowance distribution after the channel machining will directly affect the profile machining.Therefore,to improve the uniformity of allowance distribution in the machining of channels,a method that incorporates a variable feed rate mode is developed.During the machining process,the feed rates are dynamically changed according to the needs of the side gap at the different feed depths.As a result,the side gaps at the different feed depths vary,contributing to a decrease in the allowance difference.In this study,the dissolution processes of a blisk channel are simulated using different feed rates,and prediction profiles are obtained.Based on the prediction profiles,the relationship among the feed rate,feed depth,and side gap is established.Then,the feed rates at different feed depths are adjusted according to the relationship.In addition,contrast experiments are conducted.Compared with blisk channel ECM using a constant feed rate of 1 mm/min,using the variable feed rate decreases the allowance differences in the convex and concave parts by 62.2%and 67.4%,respectively.This indicates that using the variable feed rate in the ECM process for a blisk channel is feasible and efficient.展开更多
基金supported by the National Basic Research Program of China(No.2012CB955700 and 2010CB955501)
文摘Based on the survey of international emissions trading system （ETS） and quantitative analysis, policy suggestions on establishing a carbon ETS in China are presented in this study. Sectors sensitive to carbon prices, e.g., the power generation sector and the iron and steel industry, are given priority to be covered by the ETS. Interregional carbon trading should be carried out as early as possible. The cap of the ETS should be based on China＇s carbon intensity reduction target with the floor carbon price for the market being set in the beginning. Suggestions on the infrastructure of ETS are also proposed, including the national wide carbon measuring, reporting, verification system building. account registration system and the legislation to national
基金the National Science and Technology Major Project(No.2017-VII-0004-0097)the Natural Science Foundation for Distinguished Young Scholars of Jiangsu Province(No.BK20170031)。
文摘Electrochemical machining(ECM)is an economical and effective method for blisk manufacturing and includes two steps:channel machining and profile machining.The allowance distribution after the channel machining will directly affect the profile machining.Therefore,to improve the uniformity of allowance distribution in the machining of channels,a method that incorporates a variable feed rate mode is developed.During the machining process,the feed rates are dynamically changed according to the needs of the side gap at the different feed depths.As a result,the side gaps at the different feed depths vary,contributing to a decrease in the allowance difference.In this study,the dissolution processes of a blisk channel are simulated using different feed rates,and prediction profiles are obtained.Based on the prediction profiles,the relationship among the feed rate,feed depth,and side gap is established.Then,the feed rates at different feed depths are adjusted according to the relationship.In addition,contrast experiments are conducted.Compared with blisk channel ECM using a constant feed rate of 1 mm/min,using the variable feed rate decreases the allowance differences in the convex and concave parts by 62.2%and 67.4%,respectively.This indicates that using the variable feed rate in the ECM process for a blisk channel is feasible and efficient.
