为标定光交叉芯片驱动电压,控制光交叉芯片实现光路由功能,提出并搭建了基于多通道DAC(Digital to Analog Converter)阵列的控制驱动电路系统。系统主要由控制系统模块、多路驱动电路模块及上位机控制模块构成。控制电路和驱动电路具有...为标定光交叉芯片驱动电压,控制光交叉芯片实现光路由功能,提出并搭建了基于多通道DAC(Digital to Analog Converter)阵列的控制驱动电路系统。系统主要由控制系统模块、多路驱动电路模块及上位机控制模块构成。控制电路和驱动电路具有调校简单、可双极性输出、输出路数多、加电精确度较高的特点,解决了当前驱动电路工作繁琐、加电极性单一、加电路数少、精度差的问题。上位机控制模块除了可控制驱动电路施加控制电压外,还可接收来自数据采集装置采集到的光功率信号作为控制驱动系统的反馈信号。通过分析控制电压与光功率之间的关系,可得到最佳的光交叉芯片控制驱动电压。系统测试实验结果表明,该系统能提供高精确度的双极性驱动电压,有效地对光交叉芯片进行驱动。可在较短的时间内标定出光开关的控制电压,完全可以满足有源光交叉芯片控制中对驱动电压的需求。该系统在光交叉芯片控制方面具有一定的应用价值。展开更多
A micro-extended-analog-computer （uEAC） is developed on the basis of Rubel＇ s extended analog computer（EAC） model. Through the uEAC mathematical model, the resistance properties of the conductive sheet, several f...A micro-extended-analog-computer （uEAC） is developed on the basis of Rubel＇ s extended analog computer（EAC） model. Through the uEAC mathematical model, the resistance properties of the conductive sheet, several feedback uEAC models, and a more flexible uEAC cell structure with a multi-level hierarchy are discussed. Futhermore, for the dynamic uEAC array with a linear Lukasiewicz function, a nonlinear differential equation description is presented, and then a sufficient global asymptotic stability condition is derived by utilizing a Lyapunov function and a Lipchitz function. Finally, comparative simulations for a cam servo mechanism system are conducted to verify the capability of the uEAC array as an adaptive controller.展开更多
In this paper, the output tracking control is investigated for a class of nonlinear systems when only output is available for feedback. Based on the multivariable analog of circle criterion, an observer is first intro...In this paper, the output tracking control is investigated for a class of nonlinear systems when only output is available for feedback. Based on the multivariable analog of circle criterion, an observer is first introduced. Then, the observer-based output tracking controller is constructively designed by using the integral backstepping approach together with completing square. It is shown that, under relatively mild conditions, all the closed-loop signals are uniformly bounded. Meanwhile the system output asymptotically tracks the desired output. A simulation example is given to illustrate the effectiveness of the theoretical results.展开更多
The design and realization of a videoconference system based on international recommendation are introduced in this paper, and the hardware implementation of video codec based on ITU-T H. 261 is briefly discussed. Fur...The design and realization of a videoconference system based on international recommendation are introduced in this paper, and the hardware implementation of video codec based on ITU-T H. 261 is briefly discussed. Furthermore, the buffer control method and the adaptive control strategy for quantization are proposed, which are adaptive and robust. This system can be operated under the transmission rate ranging from 128kb/s to 2Mb/s. With these strategies for the videoconference system, the high quality image is obtained. The time delay of the system is about half a second.展开更多
In this paper, a new current-controlled-power technique for small signal applications is presented. The proposed technique needs no passive devices (a resistor and a capacitor) but the well-known SCR technique needs, ...In this paper, a new current-controlled-power technique for small signal applications is presented. The proposed technique needs no passive devices (a resistor and a capacitor) but the well-known SCR technique needs, thus the proposed technique is very suitable for an IC process. An example application as a new current-controlled-power CMOS fullwave rectifier is also given. The example application is simulated by using the SPICE program. Simulation results show that the proposed technique can work well;the controlled-current from 0 μA to 5.5 μA produces the peak area amplitude from 100 mV to 0 mV to the load.展开更多
文摘为标定光交叉芯片驱动电压,控制光交叉芯片实现光路由功能,提出并搭建了基于多通道DAC(Digital to Analog Converter)阵列的控制驱动电路系统。系统主要由控制系统模块、多路驱动电路模块及上位机控制模块构成。控制电路和驱动电路具有调校简单、可双极性输出、输出路数多、加电精确度较高的特点,解决了当前驱动电路工作繁琐、加电极性单一、加电路数少、精度差的问题。上位机控制模块除了可控制驱动电路施加控制电压外,还可接收来自数据采集装置采集到的光功率信号作为控制驱动系统的反馈信号。通过分析控制电压与光功率之间的关系,可得到最佳的光交叉芯片控制驱动电压。系统测试实验结果表明,该系统能提供高精确度的双极性驱动电压,有效地对光交叉芯片进行驱动。可在较短的时间内标定出光开关的控制电压,完全可以满足有源光交叉芯片控制中对驱动电压的需求。该系统在光交叉芯片控制方面具有一定的应用价值。
基金Supported by the National Natural Science Foundation of China(61433003,61273150)Beijing Higher Education Young Elite Teacher Project
文摘A micro-extended-analog-computer （uEAC） is developed on the basis of Rubel＇ s extended analog computer（EAC） model. Through the uEAC mathematical model, the resistance properties of the conductive sheet, several feedback uEAC models, and a more flexible uEAC cell structure with a multi-level hierarchy are discussed. Futhermore, for the dynamic uEAC array with a linear Lukasiewicz function, a nonlinear differential equation description is presented, and then a sufficient global asymptotic stability condition is derived by utilizing a Lyapunov function and a Lipchitz function. Finally, comparative simulations for a cam servo mechanism system are conducted to verify the capability of the uEAC array as an adaptive controller.
基金This work was supported by the National Natural Science Foundation of China(No.60304002), and the Science and Technical Development Plan ofShandong Province(No.2004GG4204014).
文摘In this paper, the output tracking control is investigated for a class of nonlinear systems when only output is available for feedback. Based on the multivariable analog of circle criterion, an observer is first introduced. Then, the observer-based output tracking controller is constructively designed by using the integral backstepping approach together with completing square. It is shown that, under relatively mild conditions, all the closed-loop signals are uniformly bounded. Meanwhile the system output asymptotically tracks the desired output. A simulation example is given to illustrate the effectiveness of the theoretical results.
基金the High Technology Research and Development Programme of China
文摘The design and realization of a videoconference system based on international recommendation are introduced in this paper, and the hardware implementation of video codec based on ITU-T H. 261 is briefly discussed. Furthermore, the buffer control method and the adaptive control strategy for quantization are proposed, which are adaptive and robust. This system can be operated under the transmission rate ranging from 128kb/s to 2Mb/s. With these strategies for the videoconference system, the high quality image is obtained. The time delay of the system is about half a second.
文摘In this paper, a new current-controlled-power technique for small signal applications is presented. The proposed technique needs no passive devices (a resistor and a capacitor) but the well-known SCR technique needs, thus the proposed technique is very suitable for an IC process. An example application as a new current-controlled-power CMOS fullwave rectifier is also given. The example application is simulated by using the SPICE program. Simulation results show that the proposed technique can work well;the controlled-current from 0 μA to 5.5 μA produces the peak area amplitude from 100 mV to 0 mV to the load.
