Design and Analysis of Analog Front-End of Passive RFID Transponders

An analog front-end of HF passive RFID transponders compatible with ISO/IEC 18000-3 is presented.Design considerations, especially the power transmission in the RFID transponder, are analyzed. Based on these considerations,an analog front-end is presented with novel architecture, high power conversion efficiency, low voltage, low power consumption, and high performance in an environment of noise and power fluctuation. The circuit is implemented in a Chartered 0.35μm standard CMOS process. The experimental results show that the chip can satisfy the design target well.

Analysis and Design of a Low-Cost RFID Tag Analog Front-End

A new,low-cost RFID tag analog front-end compatible with ISO 14443A and ISO 14443B is presented. By substituting conventional multi-circle antenna with single-circle antenna, the package cost of the tag is greatly reduced. Based on this exasperate antenna performance,a new rectifier with high power conversion efficiency and low turn-on voltage is presented. The circuit is implemented in an SMIC 0.18μm EEPROM process. Measurement results show that with a 120kΩ load,the power conversion efficiency reaches as high as 36%. For a sinusoidal wave with magnitude of 0. 5V, the output DC voltage reaches IV,which is high enough for RFID tags. The read distance is as far as 22cm.

An analog front-end circuit for ISO/IEC 15693-compatible RFID transponder IC

The 13.56 MHz analog front-end circuit for ISO/IEC 15693-compatible radio frequency identification (RFID) trans- ponder IC presented in this paper converts RF power to DC and extracts clock and data from the interrogator by 10% or 100% ASK modulation. The transponder sends data back to the interrogator by load modulation technology. The electrostatic discharge (ESD) protection circuits function to limit RF voltage to a safe level. An inductive coupling simulation modelling for 13.56 MHz RFID system is presented, with simulation results showing that the transponder operates over a wide range of electromagnetic field strength from Hmin (150 mA/m) to Hmax (5 A/m). The transponder IC is implemented in SMIC 0.35-μm three-metal two-poly mixed signal CMOS technology with embedded EEPROM.

Reconfigurable Ultrasonic Testing System Development Using Programmable Analog Front-End and Reconfigurable System-on-Chip Hardware

Ultrasonic testing systems have been extensively used in medical imaging and non-destructive testing applications. Generally, these systems aim at a particular application or target material. To make these systems portable and more adaptable to the test environments, this study presents a reconfigurable ultrasonic testing system (RUTS), which possesses dynamic reconfiguration capabilities. RUTS consists a fully programmable Analog Front-End (AFE), which facilitates beamforming and signal conditioning for variety of applications. RUTS AFE supports up to 8 transducers for phased-array implementation. Xilinx Zynq System-on-Chip (SoC) based Zedboard provides the back-end processing of RUTS. The powerful ARM embedded processor available within Zynq SoC manages the ultrasonic data acquisition/processing and overall system control, which makes RUTS a unique platform for the ultrasonic researchers to experiment and evaluate a wide range of real-time ultrasonic signal processing applications. This Linux-based system is utilized for ultra-sonic data compression implementation providing a versatile environment for further development of ultrasonic imaging and testing system. Furthermore, this study demonstrates the capabilities of RUTS by performing ultrasonic data acquisition and data compression in real-time. Thus, this reconfigurable system enables ultrasonic designers and researchers to efficiently prototype different experiments and to incorporate and analyze high performance ultrasonic signal and image processing algorithms.

Progress on Transition Metal Ions Dissolution Suppression Strategies in Prussian Blue Analogs for Aqueous Sodium-/Potassium-Ion Batteries

Aqueous sodium-ion batteries(ASIBs)and aqueous potassium-ion batteries(APIBs)present significant potential for large-scale energy storage due to their cost-effectiveness,safety,and environmental compatibility.Nonetheless,the intricate energy storage mechanisms in aqueous electrolytes place stringent require-ments on the host materials.Prussian blue analogs(PBAs),with their open three-dimensional framework and facile synthesis,stand out as leading candidates for aqueous energy storage.However,PBAs possess a swift capacity fade and limited cycle longevity,for their structural integrity is compromised by the pronounced dis-solution of transition metal(TM)ions in the aqueous milieu.This manuscript provides an exhaustive review of the recent advancements concerning PBAs in ASIBs and APIBs.The dissolution mechanisms of TM ions in PBAs,informed by their structural attributes and redox processes,are thoroughly examined.Moreover,this study delves into innovative design tactics to alleviate the dissolution issue of TM ions.In conclusion,the paper consolidates various strategies for suppressing the dissolution of TM ions in PBAs and posits avenues for prospective exploration of high-safety aqueous sodium-/potassium-ion batteries.

Oilfield analogy and productivity prediction based on machine learning: Field cases in PL oilfield, China

In the early time of oilfield development, insufficient production data and unclear understanding of oil production presented a challenge to reservoir engineers in devising effective development plans. To address this challenge, this study proposes a method using data mining technology to search for similar oil fields and predict well productivity. A query system of 135 analogy parameters is established based on geological and reservoir engineering research, and the weight values of these parameters are calculated using a data algorithm to establish an analogy system. The fuzzy matter-element algorithm is then used to calculate the similarity between oil fields, with fields having similarity greater than 70% identified as similar oil fields. Using similar oil fields as sample data, 8 important factors affecting well productivity are identified using the Pearson coefficient and mean decrease impurity(MDI) method. To establish productivity prediction models, linear regression(LR), random forest regression(RF), support vector regression(SVR), backpropagation(BP), extreme gradient boosting(XGBoost), and light gradient boosting machine(Light GBM) algorithms are used. Their performance is evaluated using the coefficient of determination(R^(2)), explained variance score(EV), mean squared error(MSE), and mean absolute error(MAE) metrics. The Light GBM model is selected to predict the productivity of 30 wells in the PL field with an average error of only 6.31%, which significantly improves the accuracy of the productivity prediction and meets the application requirements in the field. Finally, a software platform integrating data query,oil field analogy, productivity prediction, and knowledge base is established to identify patterns in massive reservoir development data and provide valuable technical references for new reservoir development.

The Analogy between the Immune System and Human Life

The immune system operates as a complex organization with distinct roles and functions. Excitingly we recognized the similarities between the cellular dynamics of the immune system and our lives, activities, and behaviors. Observing the immune system can guide how to respond to various daily situations, including when to react, tolerate, or ignore. Recognizing this analogy between our lives and the immune system should motivate us to adopt a wisdom-based approach when investigating the mechanisms and future discoveries related to this system and to deepen our understanding of this complex system with newfound respect. In this context, the present review examines several integral biological processes of the immune system by drawing parallels between them and human life, activities, and behaviors to learn how we must behave based on the insights offered by this complex organization. The literature search was conducted in international databases such as PubMed/MEDLINE and Google Scholar search engine using English equivalent keywords from 1998 up to April 2023. The search strategy used the following subject heading terms: Immune system, analogy, human life, cellular dynamics, memory, tolerance, and ignorance. In conclusion, the immune system is a complex organization comprising various cells interacting within specific sites and networks, communicating, drawing experiences, and learning how to tolerate certain conditions that make it share certain similarities with human life.

Discovery of a geomorphological analog to Martian araneiforms in the Qaidam Basin, Tibetan Plateau

Araneiforms are spider-like ground patterns that are widespread in the southern polar regions of Mars.A gas erosion process driven by the seasonal sublimation of CO_(2) ice was proposed as an explanation for their formation,which cannot occur on Earth due to the high climatic temperature.In this study,we propose an alternative mechanism that attrib-utes the araneiform formation to the erosion of upwelling salt water from the subsurface,relying on the identification of the first terrestrial analog found in a playa of the Qaidam Basin on the northern Tibetan Plateau.Morphological analysis indicates that the structures in the Qaidam Basin have fractal features comparable to araneiforms on Mars.A numerical model is developed to investigate the araneiform formation driven by the water-diffusion mechanism.The simulation res-ults indicate that the water-diffusion process,under varying ground conditions,may be responsible for the diverse aranei-form morphologies observed on both Earth and Mars.Our numerical simulations also demonstrate that the orientations of the saltwater diffusion networks are controlled by pre-existing polygonal cracks,which is consistent with observations of araneiforms on Mars and Earth.Our study thus suggests that a saltwater-related origin of the araneiform is possible and has significant implications for water searches on Mars.

Experimental and computational optimization of Prussian blue analogues as high-performance cathodes for sodium-ion batteries:A review

In this review,we discuss the electrochemical properties of Prussian blue(PB)for Na^(+)storage by combining structural engineering and electrolyte modifications.We integrated experimental data and density functional theory(DFT)in sodium-ion battery(SIB)research to refine the atomic arrangements and crystal lattices and introduce substitutions and dopants.These changes affect the lattice stability,intercalation,electronic and ionic conductivities,and electrochemical performance.We unraveled the intricate structure-electrochemical behavior relationship by combining experimental data with computational models,including first-principles calculations.This holistic approach identified techniques for optimizing PB and Prussian blue analog(PBA)structu ral properties for SIBs.We also discuss the tuning of electrolytes by systematically adjusting their composition,concentration,and additives using a combination of molecular dynamics(MD)simulations and DFT computations.Our review offers a comprehensive assessment of strategies for enhancing the electrochemical properties of PB and PBAs through structural engineering and electrolyte modifications,combining experimental insights with advanced computational simulations,and paving the way for next-generation energy storage systems.

An Adaptive Control Strategy for Energy Storage Interface Converter Based on Analogous Virtual Synchronous Generator

In the DC microgrid,the lack of inertia and damping in power electronic converters results in poor stability of DC bus voltage and low inertia of the DC microgrid during fluctuations in load and photovoltaic power.To address this issue,the application of a virtual synchronous generator(VSG)in grid-connected inverters control is referenced and proposes a control strategy called the analogous virtual synchronous generator(AVSG)control strategy for the interface DC/DC converter of the battery in the microgrid.Besides,a flexible parameter adaptive control method is introduced to further enhance the inertial behavior of the AVSG control.Firstly,a theoretical analysis is conducted on the various components of the DC microgrid,the structure of analogous virtual synchronous generator,and the control structure’s main parameters related to the DC microgrid’s inertial behavior.Secondly,the voltage change rate tracking coefficient is introduced to adjust the change of the virtual capacitance and damping coefficient flexibility,which further strengthens the inertia trend of the DC microgrid.Additionally,a small-signal modeling approach is used to analyze the approximate range of the AVSG’s main parameters ensuring system stability.Finally,conduct a simulation analysis by building the model of the DC microgrid system with photovoltaic(PV)and battery energy storage(BES)in MATLAB/Simulink.Simulation results from different scenarios have verified that the AVSG control introduces fixed inertia and damping into the droop control of the battery,resulting in a certain level of inertia enhancement.Furthermore,the additional adaptive control strategy built upon the AVSG control provides better and flexible inertial support for the DC microgrid,further enhances the stability of the DC bus voltage,and has a more positive impact on the battery performance.

Design of an analog front-end for ambulatory biopotential measurement systems

A continuously tunable gain and bandwidth analog front-end for ambulatory biopotential measurement systems is presented. The front-end circuit is capable of amplifying and conditioning different biosignals. To optimize the power consumption and simplify the system architecture, the front-end only adopts two-stage amplifiers. In addition, careful design eliminates the need for chopping circuits. The input-referred noise of the system is only 1.19 μVrms （0.48-2000 Hz）. The chip is fabricated via a SMIC 0.18μm CMOS process. Although the power consumption is only 32.1 μW under a 3 V voltage supply, test results show that the chip can successfully extract biopotential signals.

A 410 μW, 70 dB SNR high performance analog front-end for portable audio application

This paper describes an analog front-end （AFE） intended for portable audio application, which operates at 1 V and consumes only 410 μW. The AFE consists of a 30 dB-gain programmable gain amplifier （PGA） and a 2nd-order 3-bit sigma-delta modulator. The PGA with single input and on-chip common-mode bias voltage shows good noise-reduction performance. The modulator makes use of data weighted averaging to reduce the linearity requirements of the digital-to-analog converter in the feedback loop. The AFE is implemented in the SMIC 0.13μm 1PSM CMOS process. The measurement results show that in a 1 V power supply, at 200 mVp-p, between 100 Hz and 20 kHz, the maximal signal-to-noise ratio is 70 dB, and the total power is 410 μW.

A CMOS analog front-end chip for amperometric electrochemical sensors

This paper reports a complimentary metal-oxide-semiconductor （CMOS） analog front-end chip for amperometric electrochemical sensors. The chip includes a digital configuration circuit, which can communicate with an external microcontroller by employing an I^2C interface bus, and thus is highly programmable. Digital correlative double samples technique and an incremental sigma-delta analog to digital converter （∑-△ ADC） are employed to achieve a new proposed system architecture with double samples. The chip has been fabricated in a standard 0.18-μm CMOS process with high-precision and high-linearity performance occupying an area of 1.3 × 1.9 mm^2. Sample solutions with various phosphate concentrations have been detected with a step concentration of 0.01 mg/L.

High-Bandwidth,Low-Power CMOS Transistor Based CAB for Field Programmable Analog Array

This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.

Dynamic Analogical Association Algorithm Based on Manifold Matching for Few-Shot Learning

At present,deep learning has been well applied in many fields.However,due to the high complexity of hypothesis space,numerous training samples are usually required to ensure the reliability of minimizing experience risk.Therefore,training a classifier with a small number of training examples is a challenging task.From a biological point of view,based on the assumption that rich prior knowledge and analogical association should enable human beings to quickly distinguish novel things from a few or even one example,we proposed a dynamic analogical association algorithm to make the model use only a few labeled samples for classification.To be specific,the algorithm search for knowledge structures similar to existing tasks in prior knowledge based on manifold matching,and combine sampling distributions to generate offsets instead of two sample points,thereby ensuring high confidence and significant contribution to the classification.The comparative results on two common benchmark datasets substantiate the superiority of the proposed method compared to existing data generation approaches for few-shot learning,and the effectiveness of the algorithm has been proved through ablation experiments.

Performance optimization of tri-gate junctionless FinFET using channel stack engineering for digital and analog/RF design

This manuscript explores the behavior of a junctionless tri-gate FinFET at the nano-scale region using SiGe material for the channel.For the analysis,three different channel structures are used:(a)tri-layer stack channel(TLSC)(Si-SiGe-Si),(b)double layer stack channel(DLSC)(SiGe-Si),(c)single layer channel(SLC)(S_(i)).The I−V characteristics,subthreshold swing(SS),drain-induced barrier lowering(DIBL),threshold voltage(V_(t)),drain current(ION),OFF current(IOFF),and ON-OFF current ratio(ION/IOFF)are observed for the structures at a 20 nm gate length.It is seen that TLSC provides 21.3%and 14.3%more ON current than DLSC and SLC,respectively.The paper also explores the analog and RF factors such as input transconductance(g_(m)),output transconductance(gds),gain(gm/gds),transconductance generation factor(TGF),cut-off frequency(f_(T)),maximum oscillation frequency(f_(max)),gain frequency product(GFP)and linearity performance parameters such as second and third-order harmonics(g_(m2),g_(m3)),voltage intercept points(VIP_(2),VIP_(3))and 1-dB compression points for the three structures.The results show that the TLSC has a high analog performance due to more gm and provides 16.3%,48.4%more gain than SLC and DLSC,respectively and it also provides better linearity.All the results are obtained using the VisualTCAD tool.

Structural Variation between the Western and Eastern Kuqa Fold-and-thrust Belt,China:Insights from Seismic Interpretation and Analog Modeling

The Kuqa fold-and-thrust belt exhibits apparent structural variation in the western and eastern zone.Two salt layer act as effective decollements and influence the varied deformation.In this study,detailed seismic interpretations and analog modeling are presented to construct the suprasalt and subsalt structures in the transfer zone of the middle Kuqa and investigate the influence of the two salt layers.The results reveal that the relationship of the two salt layers changes from separated to connected,and then overlapped toward the foreland in the transfer zone.Different structural models are formed in the suprasalt and subsalt units due to the interaction of the two salt layers.The imbricate thrust faults form two broom-like fault systems in the subsalt units.The suprasalt units develop detached folds terminating toward the east in the region near the orogenic belt.Whereas,two offset anticlines with different trends develop at the frontal edge of the lower salt layer and the trailing edge of the upper salt layer,respectively.According to exploration results in this region,the relationship between suprasalt and subsalt structures has an influence on hydrocarbon accumulation.We believe that the connected deformation contains high-risk plays while the decoupled deformation contains well-preserved plays.

A Low-Power 12-Bit SAR ADC for Analog Convolutional Kernel of Mixed-Signal CNN Accelerator

As deep learning techniques such as Convolutional Neural Networks(CNNs)are widely adopted,the complexity of CNNs is rapidly increasing due to the growing demand for CNN accelerator system-on-chip(SoC).Although conventional CNN accelerators can reduce the computational time of learning and inference tasks,they tend to occupy large chip areas due to many multiply-and-accumulate(MAC)operators when implemented in complex digital circuits,incurring excessive power consumption.To overcome these drawbacks,this work implements an analog convolutional filter consisting of an analog multiply-and-accumulate arithmetic circuit along with an analog-to-digital converter(ADC).This paper introduces the architecture of an analog convolutional kernel comprised of low-power ultra-small circuits for neural network accelerator chips.ADC is an essential component of the analog convolutional kernel used to convert the analog convolutional result to digital values to be stored in memory.This work presents the implementation of a highly low-power and area-efficient 12-bit Successive Approximation Register(SAR)ADC.Unlink most other SAR-ADCs with differential structure;the proposed ADC employs a single-ended capacitor array to support the preceding single-ended max-pooling circuit along with minimal power consumption.The SARADCimplementation also introduces a unique circuit that reduces kick-back noise to increase performance.It was implemented in a test chip using a 55 nm CMOS process.It demonstrates that the proposed ADC reduces Kick-back noise by 40%and consequently improves the ADC’s resolution by about 10%while providing a near rail-to-rail dynamic rangewith significantly lower power consumption than conventional ADCs.The ADC test chip shows a chip size of 4600μm^(2)with a power consumption of 6.6μW while providing an signal-to-noise-and-distortion ratio(SNDR)of 68.45 dB,corresponding to an effective number of bits(ENOB)of 11.07 bits.

采动岩层整体移动“类双曲线”理论模型及验证——从二维“类双曲线”到三维“类双曲面”模型

煤炭开采会引起上覆岩层自下而上变形、破断及移动,并导致地表沉陷等问题,其本质是一个力学过程,故亟需发展基于岩层破断力学机理的移动理论模型。首先简要回顾了国内外岩层移动理论模型,然后重点介绍了本团队近年来在岩层整体移动理论模型方面的研究进展。基于不同层位岩层的破断形态的力学分析和相似模拟试验结果,提出了采动覆岩整体移动“类双曲线”模型,其顶点大约位于上覆岩层主关键层的层位。进而建立了岩层移动内外“类双曲线”整体模型,给出了采动覆岩内外整体移动表达式及物理意义参数体系。针对不同覆岩和煤层赋存条件,分析了岩层整体移动“类双曲线”模型的演化规律。在此基础上,进一步将二维“类双曲线”拓展到三维“类双曲面”模型,建立了采动覆岩全空间“类双曲面”立体移动模型,该模型包含“类单叶”和“类双叶”双曲面。该理论模型是在我国很多前辈及学者的研究基础上,从系统科学的角度考虑岩层的整体移动规律,初步形成了采动覆岩整体移动“类双曲线(面)”理论模型框架,希望能为我国煤炭科学开采提供理论指导。

基于案例推理的法律人工智能建模——以海波案例系统的法律解析为中心

案例推理系统采取符号主义的路径进行法律人工智能建模,运用逻辑学的方法刻画案例推理的过程,但是,传统逻辑工具难以对案例推理过程中的可废止过程进行刻画和表达。运用论证理论中的论证型式工具,对经典案例推理系统海波的工作原理进行解析,可重构案例推理系统的逻辑模型,明确案例推理系统的智能界限。基于案例推理系统逻辑模型的解析,反思当下司法实践中的类案系统,可证立人工智能辅助司法的基本原则。