Effect of solvent on the initiation mechanism of living anionic polymerization of styrene:A computational study

For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and kinetics.In this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic modeling.In terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent molecules.Furthermore,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate coefficient.Counterintuitively,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic modeling.It is found that in benzene and n-pentane,the polymerization rate exhibits first-order kinetics.While,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.

Dispersion polymerization of anionic polyacrylamide in an aqueous salt medium

Anionic polyacrylamide dispersions were prepared by dispersion polymerization in an aqueous salt medium, using acrylamide（AM） and acrylic acid（AA） as monomers and anionic polyelectrolytes as stabilizer. Effects of salt concentration, and molecular weight and concentration of stabilizers on the stability of the dispersions were investigated using a HAAKE rheometer and optical microscopy. The results showed that stable anionic polyacrylamide dispersions, consisting of smooth, spherical, polydisperse particles, could be obtained under the conditions of salt concentration ranging from 26 wt% to 30 wt%, concentration of stabilizers from 1.2 wt% to 1.8 wt%, and intrinsic viscosity of stabilizers from 2.98 dL·g^-1 to 3.74 dL·g^-1. The apparent viscosity of the stable dispersions changed very little with the shear rate, showing Newton fluid behavior.

Asymmetric Polymerization of Menthyl Methacrylate by Anionic Catalysts

In this paper, (-)menthyl methacrylate((-)MnMA) was polymerized at 78C in toluene with three types of anionic catalysts, which were complexes of fluorenyllithium with (-)sparteine - ((-)-Sp) , (S, S)-(+)-2, 3-dimethoxy-1, 4-bis(dimethylamino)butane((+)DDB) and N,N,N,N-tetra- methylethylenediamine(TMEDA), and the chiral optical property of the obtained polymer was studied. The circular dichroism (CD) spectrum of the polymer showed negative Cotton effect.

The Kinetic Study on the Anionic Polymerization of Isoprene

The kinetic study of the anionic polymerization of isoprene is carried out in tetrahy-drofuran(THF), using n-BuLi as initiator. Kinetic parameters are obtained, which comprise chain propagation rate constant, kp, and partial rate constants, k3 and k4 + k5, propagation orders with respect to monomer and active species concentrations, α and β, real activation energy, E, as well as partial activation energies, E3 and E4+5 and so on. The relationship between the microstruc-ture of polyisoprene and the ratio of [THF]/[n-BuLi] has been investigated. On the basis of the studies mentioned above, a reasonable mechanism of the anionic polymerization of isoprene in THF is proposed.

TRANSAMIDATION IN THE in situ BLENDING OF POLYAMIDE 1212 WITH POLYAMIDE 6 THROUGH ANIONIC POLYMERIZATION OF CAPROLACTAM

20 wt% polyamide 12 （PA1212） pellets were dissolved in molten caprolactam. The caprolactam was then catalyzed at 180℃ and polymerized by means of anionic ring-opening polymerization to produce in situ blends of the resultant polyamide 6 （PA6） and PA 1212. Mechanical blends with same ingredient were prepared through melt blending on a twin-screw extruder. Scanning electron microscopy （SEM） observation revealed that contrary to the mechanical blends with small spherulites embedded in the matrix, no phase-separation existed in the in situ blends. The results of thermal analysis by differential scanning calorimetry （DSC） showed that single melting peak and crystallization peak existed for the in situ blends, while two melting and crystallization peaks appeared for the mechanical blends. The in situ blend film and the mixed blend film, both cast from a dilute formic acid solution with a concentration of 0.5 g/L, remained similar crystallization and melting behavior as above. It is proved by solution 13C-NMR analysis that transamidation took place during the in situ blending, and it is suggested that the combination of temperature increasing and the basic surrounding derived from NaOH during polymerization resulted in the occurrence of transamidation. Furthermore, it is proposed that the interchange reaction between PA 1212 and PA6 also resulted from the degradative reaction during the anionic polymerization.

Synthesis and Characterization of Star-branched Polyisobutylene by Combination of Anionic Polymerization and Cationic Polymerization

A star-shaped multifunctional styrene-isoprene copolymer was synthesized with n-BuLi as initiator, divinyl benzene as coupling agent, cyclobexane as solvent by living anionic polymerization. Using this polymer as grafting agent, a novel star-shaped branched polymer, containing several polyisobutylene, was prepared via cationic ~aolymerization. The star PS-b-PI and star-branched polyisobutylene were characterized by GPC, ＇HNMR and FT-IR, and the effects of different adding order and the amount of grafting agent were investigated.

Lithium Camphor initiated Anionic Polymerization of C_(60) and Styrene

A simple new method for the syntheses of a highly soluble noncross linked C 60 styrene copolymers by means of lithium camphor initiated anionic polymerization reaction is demonstrated.

ANIONIC POLYMERIZATION OF ALKYL METHACRYLATES INITIATED BY nBuCu(NCy_2)Li

Anionic polymerization of methyl methacrylate (MMA), n-butyl methacrylate (nBMA) and glycidyl methacrylate (GMA) initiated by nBuCu(NCy2)Li (1) in tetrahydrofuran (THF) at -50 degrees C to -10 degrees C was investigated. It was found that the polymerization of MMA and nBMA initiated by 1 proceeded quantitatively in THF to afford PMMA and PBMA with polydispersity index 1.15-1.30 and nearly 100% initiator efficiencies at -10 degrees C. The molecular weights increased linearly with the ratio of [monomer]/[1]. However, a post-polymerization experiment carried out on this system revealed a double polymer peak by GPC when fresh monomer was added after an interval of 10 min. Polymerization of styrene could be initiated by 1, but the initiator efficiency was low.

SYNTHESIS OF BLOCK COPOLYMER BY INTEGRATED LIVING ANIONIC POLYMERIZATION-ATOM TRANSFER RADICAL POLYMERIZATION(ATRP)

Alpha-trichloroacetoxy terminated polystyrene oligomer (PS-CH2CH2OCOCCl3) and poly-(styrene-b-butadiene) oligomer [P(S-b-B)-CH2CH2OCOCCl3)] were synthesized by living anionic polymeri-zation using n-butyllithium as initiator. Then the PS-CH2CH2OCOCCl3 (PS-Cl-3) or P(S-b-B)-CH2CH2O-COCCl3 (PSB-Cl-3) was used as the macroinitiator in the polymerization of(meth)acrylates in the presence of CuX/bpy. AB diblock and ABC triblock copolymers were prepared by the integrated living anionic polymerization (LAP)-atom transfer radical polymerization (ATRP). The structures of the PSB-Cl-3 and the P(S-b-MMA) were identified by FTIR and H-1-NMR spectrum, respectively. A new way to design block copolymers (the combination of LAP and ATRP) was developed.

SYNTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXY CARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.

SYNTHESIS OF CHIRAL BINAPHTHYL CROWN ETHERS AND THEIR USE IN ANIONIC POLYMERIZATION OF METHYL METHACRYLATE AS INITIATOR LIGANDS

Some chiral binaphthyl crown ethers were synthesized. The anionic polymerization of methyl methacrylate (MMA) was carried out in the presence of t-BuOK, Ph2CHK or Ph2CHNa (RM), and RM coordination initiator by using chiral binaphthyl crown ethers as ligands, respectively. The results showed that in the former case the PMMA obtained has mainly isotactic structure but without optical activity, while in the later case the PMMA produced predominately has syndiotactic structure also without optical activity.

SYTHESIS AND ANIONIC POLYMERIZATION OF 2-METHYL-2-METHOXYCARBONYL-5-METHYLENE-1, 3-DIOXOLAN-4-ONE

A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.

Silazyl-Lithiums: A kind of new Initiators for the Anionic Non- equilibrium Ring-opening Polymerization of Octamethylcyclotetrasiloxane (D_4)

The initiation reactions in the anionic non-equilibrium polymerization of octamethy- lcyclotetrasiloxane (D4) initiated by silazyllithiums were investigated. It was found that the structure of the substituents on the Si atom had great influences on the initiation activity of silazyllithiums.

Helix-Sense-Selective Polymerization of N,N-Diphenyl (Meth)acrylamide by Anionic Catalysts

In this paper, the helix-sense-selective polymerization of N,N-diphenyl acrylamide (DPAA) and N,N-diphenyl methacrylamide(DPMAA) were studied with living helix prepolymer as anionic initiator, and the chiral optical properties of the obtained polymers were investigated too. It was shown that optically active polymers of DPAA and DPMAA could be obtained under the experimental condition, and exhibited the same screw sense as that of the prepolymer.

HELIX SENSE-SELECTIVE COPOLYMERIZATION OF TRIPHENYLMETHYL METHACRYLATE WITH CHIRAL ANIONIC INITIATORS

Optically active copolymers of pairs of three monomers, triphenyl (methyl methacrylate)and one or two pyridyl substituted methyl methacrylate homologues, were obtained by helix-sense-selective copolymerization using complexes of organolithium with chiral ligand as anionicinitiators in toluene at low temperature. The copolymers obtained with (-)-sparteine (Sp) and(S,S)-(+)-and (R, R)-(-)-2, 3-dimethoxy-1, 4-bis (dimethylamino) butanes((+)-and (-)-DDB) complexes of organolithium showed low optical activity, but PMP complex with N, N-diphenylethyleneamine monolithium amide (PMP-DPEDA-Li) was effective in synthesizingcopolymers of high optical rotation ([α]_D^(25) about+320～1370°)which were comparable to thoseof relative homopolymers with one-handed helical structure.

Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.

COPOLYMERIZATION PROCESS OF TRIPHENYLMETHYL METHACRYLATE AND MMA WITH CHIRAL ANIONIC COMPLEX INITIATOR

The copolymerization process of triphenylmethyl methacrylate (TrMA) and methylmethacrylate (MMA) using chiral anionic complex initiator (-) SP-FlLi (Scheme 1) has beenstudied in toluene and THF, respectively. The copolymer obtained in toluene possessed muchhigher specific rotation than that in THF. These copolymers have shown a tendency to a random and a like alternating structure, respectively.

Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite-Free Solid-State Lithium Metal Battery

This work demonstrates a novel polymerization-derived polymer electrolyte consisting of methyl methacrylate,lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate.The polymerization of MMA was initiated by the amino compounds following an anionic catalytic mechanism.LiTFSI plays both roles including the initiator and Li ion source in the polymer electrolyte.Normally,lithium bis(trifluoromethanesulfonyl)imide has difficulty in initiating the polymerization reaction of methyl methacrylate monomer,a very high concentration of lithium bis(trifluoromethanesulfonyl)imide is needed for initiating the polymerization.However,the fluoroethylene carbonate additive can work as a supporter to facilitate the degree of dissociation of lithium bis(trifluoromethanesulfonyl)imide and increase its initiator capacity due to the high dielectric constant.The as-prepared poly-methyl methacrylate-based polymer electrolyte has a high ionic conductivity(1.19×10^(−3)S cm^(−1)),a wide electrochemical stability window(5 V vs Li^(+)/Li),and a high Li ion transference number(t_(Li^(+)))of 0.74 at room temperature(RT).Moreover,this polymerization-derived polymer electrolyte can effectively work as an artificial protective layer on Li metal anode,which enabled the Li symmetric cell to achieve a long-term cycling performance at 0.2 mAh cm^(−2)for 2800 h.The LiFePO_(4)battery with polymerization-derived polymer electrolyte-modified Li metal anode shows a capacity retention of 91.17%after 800 cycles at 0.5 C.This work provides a facile and accessible approach to manufacturing poly-methyl methacrylate-based polymerization-derived polymer electrolyte and shows great potential as an interphase in Li metal batteries.

Efficient in-situ end-functionalization of polydienes by isothiocyanate via neodymium mediated coordinative chain transfer polymerization system

End-functionalization of polydiene rubbers can not only improve its compatibility with inorganic fillers,but also enhance the overall mechanical properties.Nevertheless,for traditional neodymium(Nd)diene polymerization systems,it is highly challenging to achieve such end-functionalizations,because most of polydienyl chains are capped withη3-allyl-Nd moiety during the end of polymerization,which shows very poor reactivity with nucleophile compounds.We launched a new diene polymerization strategy calling coordinative chain transfer polymerization(CCTP)[1].In such a system,all the polydienyl chains are capped withη1-allyl-Al moieties,which reveal greater reactivity with cyclic esters and epoxide compounds,providing an effective manner to prepare polydiene-polyester amphiphilic block copolymers.Inspired by such findings,we now show herein how such types of chain-ends react with isot-hiocyanate to demonstrate an efficient in-situ manner to access end-functionalized polydienes by using CCTP.

Influence of external nitrogen-containing donors on polymerization behavior of neodymium-based cis-1,4-polybutadiene rubber

Neodymium(Nd)-based catalyst in butadiene(Bd)polymerization has drawn interests due to its availability in affording higher cis-1,4-unit selectivity than transition metal(Ti,Co,Ni,etc.)-based catalysts[1-2].Such outstanding high cis-1,4-unit selecti-vity is hypothetically originated from the presence of 4 f orbitals,that can participate in monomer coordination and thereby govern subsequent enchainment manners.This unique characteristic also renders the active species highly susceptible to Lewis bases,and may impact the overall selectivity as well as polyme-rization behavior after coordination.Nevertheless,it is still a virgin area in such a field,and the influence of Lewis bases on Nd-based diene polymerizations is still a black box.Based on this consideration,how nitrogen-containing donors(D)impacts the overall behaviors of Nd-mediated Bd polymerizations is disclosed.