The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and b...The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and ballistic test were performed to the prepared composites.After the tests,the specimens were recovered and analyzed for micromorphology.Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC.Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC,but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC.For the ballistic test,it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests,microscopic analysis of the specimens was applied,and their failure mechanism was discussed.The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage.Although delamination damage can be found in the WBFC under the above loading conditions,the degree of delamination is far less than that of the UBFC.展开更多
Extraction of mineral resources is the backbone of the national economy in many developed and developing countries of the world. However, the exploitation can have many negative impacts on the immediate environment of...Extraction of mineral resources is the backbone of the national economy in many developed and developing countries of the world. However, the exploitation can have many negative impacts on the immediate environment of the exploitation sites. In this study performed on some mining areas of the Moroccan Anti-Atlas, four principal negative effects were detected: effect on the physiognomy, on safety, on health, and on recovery rate. The principal source of this situation is the exploitation of the ore deposits from top to bottom without using any geological preparation and the use of non-adapted exploitation technics. To minimize these impacts, we propose to establish a geological study and advanced mining exploration before starting exploitation, and follow an exploitation technic well adapted to the morphology of the ore deposit like cut-and-fill mining and sublevel stoping methods.展开更多
利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kr...利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kronecker曲率之间的关系;并研究了Lorentzian曲面的一些基本几何性质.展开更多
It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be rea...It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be really put into practice. Anti-corruption mechanism refers to a organic operation system of the interaction,interconnection and constraint between the constituent elements( parts) and elements of national anti-corruption,and as a system,anti-corruption mechanism should have the characteristics of system aticness,comprehensiveness,transparency,legalization,public participation,scientific dynam ic,and internationalism. The construction of deepening anti-corruption mechanism is the need for reconstructing the ruling legitimacy of the party and the governm ent. Adhering to the principle of treating both root causes and symptoms is necessary in the construction of anti-corruption m echanism,com bating and punishing corruption is an important part of anti-corruption,and the prevention and control of corruption is the basic project of anti-corruption. Therefore,the construction of prevention and control mechanism in the anti-corruption mechanism has a more far-reaching significance.展开更多
A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and t...A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products展开更多
Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a me...Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.展开更多
基金supported by the National Science Foundation of China(No.51571033)supported in part by the National Natural Science Foundation of China under Grant No.11521062。
文摘The woven basalt fiber composites(WBFC) and the unidirectional [0°/90°/45°/-45°]s basalt fiber composites(UBFC) were prepared by hot-pressing.Three-point bending test,low velocity impact test,and ballistic test were performed to the prepared composites.After the tests,the specimens were recovered and analyzed for micromorphology.Three-point bending tests show that both the bending strength and stiffness of the WBFC surpass those of the UBFC.Low velocity impact test results show that the low velocity impact resistance to hemispherical impactor of the UBFC is higher than that of the WBFC,but the low velocity impact resistance to sharp impactor of the UBFC is lower than that of the WBFC.For the ballistic test,it can be found that the ballistic property of the UBFC is higher than that of the WBFC. After the tests,microscopic analysis of the specimens was applied,and their failure mechanism was discussed.The main failure modes of the UBFC are delamination and fibers breakage under the above loading conditions while the main failure mode of the WBFC is fibers breakage.Although delamination damage can be found in the WBFC under the above loading conditions,the degree of delamination is far less than that of the UBFC.
文摘Extraction of mineral resources is the backbone of the national economy in many developed and developing countries of the world. However, the exploitation can have many negative impacts on the immediate environment of the exploitation sites. In this study performed on some mining areas of the Moroccan Anti-Atlas, four principal negative effects were detected: effect on the physiognomy, on safety, on health, and on recovery rate. The principal source of this situation is the exploitation of the ore deposits from top to bottom without using any geological preparation and the use of non-adapted exploitation technics. To minimize these impacts, we propose to establish a geological study and advanced mining exploration before starting exploitation, and follow an exploitation technic well adapted to the morphology of the ore deposit like cut-and-fill mining and sublevel stoping methods.
文摘利用Arnol'd的Legendrian理论,对三维Anti de Sitter空间中Lorentzian曲面进行了研究.引入光维高度函数概念研究了三维Anti de Sitter空间Lorentzian曲面的S1t×S1s-值、光锥Gauss映射的奇点,进行了奇点分类,揭示了类光Causs-kronecker曲率之间的关系;并研究了Lorentzian曲面的一些基本几何性质.
文摘It needs the foundation of system and the guarantee of organizational system for anti-corruption,but it is more necessary to build and form an effective anti-corruption mechanism,so that the anti-corruption can be really put into practice. Anti-corruption mechanism refers to a organic operation system of the interaction,interconnection and constraint between the constituent elements( parts) and elements of national anti-corruption,and as a system,anti-corruption mechanism should have the characteristics of system aticness,comprehensiveness,transparency,legalization,public participation,scientific dynam ic,and internationalism. The construction of deepening anti-corruption mechanism is the need for reconstructing the ruling legitimacy of the party and the governm ent. Adhering to the principle of treating both root causes and symptoms is necessary in the construction of anti-corruption m echanism,com bating and punishing corruption is an important part of anti-corruption,and the prevention and control of corruption is the basic project of anti-corruption. Therefore,the construction of prevention and control mechanism in the anti-corruption mechanism has a more far-reaching significance.
基金The project serial number 92B0716Shanghai Natural Science Foundation
文摘A research on the process of cotton fabric flame-re-tarding,anti-bacterial finishing and one-bath finish-ing of anti-bacterial and flame-retarding is discussed.The flame retardant agent was phosphorous-contained,and the bacteriostatic finishing agent named SFR-1 wassynthesized.The flame retardancy of the fabric finishedcan meet the DOC FF3-71 Children Sleepwear Stan-dard.Its bacterial inhibiting capacity can meet and ex-ceed the requirements of similar products
文摘Friction spun core yarn has two components: filament core and staple fiber sheath. Under axial rubbing action, the failure mode of the core yarn is the stripping of the sheath from the core. This paper introduces a method to test the anti - stripping property of the core yarn. With a modified Universal Testing Machine, the stripping resistance of friction spun core yarn can be continuously measured. Some factors Influencing the measurements are discussed in detail. The testing results are compared with those from a Y731 Yarn Abrasion Tester and fur - ther confirmed by weaving practice.
