For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatme...For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.展开更多
In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content...In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.展开更多
Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)...Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)O_(3) as a robust barrier to FeSiAl core is introduced to mitigate corrosion resistance.The FeSiAl@ZnO@Al_(2)O_(3) layer by layer hybrid structure is realized with atomic-scale precision through the atomic layer deposition technique.Owing to the unique hybrid structure,the FeSiAl@ZnO@Al_(2)O_(3) exhibits record-high micro-wave absorbing performance in low-frequency bands covering L and S bands with a minimum reflection loss(RLmin)of-50.6 dB at 3.4 GHz.Compared with pure FeSiAl(RLmin of-13.5 dB,a bandwidth of 0.5 GHz),the RLmin value and effective bandwidth of this designed novel absorber increased up to~3.7 and~3 times,respectively.Fur-thermore,the inert ceramic dual-shells have improved 9.0 times the anti-corrosion property of FeSiAl core by multistage barriers towards corrosive medium and obstruction of the electric circuit.This is attributed to the large charge transfer resistance,increased impedance modulus|Z|0.01 Hz,and frequency time constant of FeSiAl@ZnO@Al_(2)O_(3).The research demonstrates a promising platform toward the design of next-generation MAs with improved anti-corrosion properties.展开更多
Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some dis...Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method (PEM), was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding (CD) were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.展开更多
In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-r...In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-rization (FGD). The relationship between curing conversion rate of hybrid polymer and temperature was investigated by differential scanning calorimeter (DSC). The adhesion strength, coefficient of thermal expansion and flame retardant properties of three anti-corrosion materials were measured and analyzed. A corrosion test in 8% H2SO4 and 5% HCl at temperature cycle of 40°C~ 160°C was applied to study corrosion resistance of several anti-corrosion materials. Gravimetric measurement and morphological observation of three materials before and after corrosion test were comparatively analyzed in the paper. The small weight change and good morphological structure of hybrid composite during corrosion test demonstrate that hybrid composite has better anti-corrosion properties than epoxy modified silicone coating and vinyl ester flake mastic.展开更多
Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron micros...Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.展开更多
In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle t...In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.展开更多
The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The...The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.展开更多
As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pol...As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.展开更多
A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat ...A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.展开更多
A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO...A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO_(2)@o-vanillin was encapsulated by tetraethyl orthosilicate(TEOS).Finally,3-aminopropyl triethoxysilane(APTES)was used to modify the obtained sample.The morphology,structural phase and thermal stability of the TiO_(2)@o-vanillin@TEOS-APTES nanocontainer were analyzed using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray diffractometry(XRD)and thermal gravimetric analysis(TG).The release rate of o-vanillin was investigated using an ultraviolet-visible(UV-vis)spectrometer.The anti-corrosion performances of the epoxy,epoxy@o-vanillin and epoxy@TiO_(2)@o-vanillin@TEOS-APTES coatings on steel sheets were evaluated using an electrochemical method and scarification experiments.The results showed that the impedance value of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating was two orders of magnitude higher than that of the blank epoxy coating,and one order of magnitude higher than that of the epoxy@o-vanillin coating.The maximum inhibition rate of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating on the steel can reach 97.3%.The scarification experiments confirmed that the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating had the best anti-corrosion performance.展开更多
Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes...Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes to a conclusion about the analysis of the anti-corrosion test, revealing that among all of the common basal slop protection materials, mixed stump and fence are with Class II anti-corrosion property, while the geo-textile is with the first-class anti-corrosion property.展开更多
In an era where the concept of green development is deeply rooted, magnesium(Mg) alloy as a light metal has a long-term development prospect in the process of energy saving, emission reduction and environmental improv...In an era where the concept of green development is deeply rooted, magnesium(Mg) alloy as a light metal has a long-term development prospect in the process of energy saving, emission reduction and environmental improvement. However, anti-corrosion performance of Mg alloy is poor due to the high chemical activity and low equilibrium potential, which limits the development of Mg alloy products.Herein, three-dimensional mesopore hollow polypyrrole spheres(MHPS) were prepared, and the MHPS was inserted into the middle of the stacked hexagon boron nitride(h-BN) lamellae, which allowed the hBN to be separated forming a further composite with abundant pore structure. Subsequently, the MHPS/hBN-OH composite was uniformly sprayed on the Mg alloy surface via simple spraying method to form the superhydrophobic surface(SHS). Finally, the slippery liquid infused porous surface(SLIPS) was successfully fabricated by applying drops of silicone lubricant on the superhydrophobic coating surface. After a series of characterization and testing, the results showed that the stacking of h-BN lamellae was significantly reduced after h-BN was successfully embedded by MHPS. In addition, the fabricated SLIPS have excellent self-cleaning, mechanical stability, anti-icing and anti-corrosion properties. Therefore, the method of embedding polymer microspheres not only offers a new strategy for h-BN exfoliation, but also the successful prepared SLIPS largely retards the corrosion of Mg alloy while providing new ideas for the development of SLIPS.展开更多
In order to meet the requirements of the marine environment for microwave absorption(MA)materials,we put forward the strategy of constructing multi-functional composite materials,which integrate microwave absorption,a...In order to meet the requirements of the marine environment for microwave absorption(MA)materials,we put forward the strategy of constructing multi-functional composite materials,which integrate microwave absorption,anti-corrosion,and antibacterial properties.Herein,graphene oxide(GO)was used as a template to induce the growth of zeolitic imidazolate framework-8(ZIF-8),simultaneously as a two-dimensional(2D)nanocontainers to load corrosion inhibitors to achieve pH-responsive and self-healing properties.Finally,quaternary ammonium salt(dimethyl octadecyl(3-trimethoxylsilyl propyl)ammonium chloride(DMAOP))and sodium ascorbate(VCNa)were introduced to achieve synergistic antibacterial activity and the reduction of GO.The 2D strip-like structure of ZIF-8 was due to the confined growth induced by the electrostatic attraction between ZIF-8 and GO sheets.The as-obtained reduced GO(RGO)/ZIF-8/DMAOP5 exhibited excellent microwave absorption(MA)properties,with a minimum reflection loss(RL)value of-47.08 dB at 12.73 GHz when the thickness was 2.8 mm.Moreover,the effective absorption bandwidth reached 6.84 GHz.After soaking in 3.5%NaCl solution for 35 days,the RGO/ZIF-8/DMAOP5-0.7%coating still achieved an impedance value of 4.585×107Ω·cm^(2) and a protective efficiency of 99.994%,providing superior anti-corrosion properties.In addition,fantastic antibacterial activity was obtained,with the antibacterial rates of RGO/ZIF-8/DMAOP_(10) reaching 99.39%and 100%against Escherichia coli and Staphylococcus aureus.This work could open new avenues towards the development of a new generation of multifunctional MA materials.展开更多
This study explores the corrosion issues arising from the coupled combustion of coal and biomass and proposes potential solutions.Biomass,as a renewable energy source,offers advantages in energy-saving and carbon redu...This study explores the corrosion issues arising from the coupled combustion of coal and biomass and proposes potential solutions.Biomass,as a renewable energy source,offers advantages in energy-saving and carbon reduction.However,the corrosive effects of alkali metal compounds,sulfur(S)and chlorine(Cl)elements in the ash after combustion cannot be underestimated due to the high volatile content of biomass fuels.We investigate the corrosion mechanisms,as well as the transfer of Cl and alkali metal elements during this process.Comparative corrosion analyses are conducted among coal-fired boilers,pure biomass boilers and boilers with coupled combustion.Various biomass types in co-firing are studied to understand different corrosion outcomes.The main factors influencing corrosion include the physicochemical properties of biomass feedstock,furnace temperature and heating surface materials,with the chemical composition and ash content of biomass playing a dominant role.Currently,the methods used for anti-corrosion include water washing pretreatment of biomass feedstock,application of novel alloys and coatings and the development of additives to inhibit fouling,ash deposition and corrosion.Efficient inhibitors are economical and easy to produce.Additionally,biomass can be converted into biomass gasification gas,although challenges related to tar still need to be addressed.展开更多
Bio-inspired superhydrophobic magnesium(Mg)alloy surfaces are of increasing interest in corrosion protection due to superior barrier and shielding effects.However,superhydrophobic(SHB)anti-corrosion surfaces are susce...Bio-inspired superhydrophobic magnesium(Mg)alloy surfaces are of increasing interest in corrosion protection due to superior barrier and shielding effects.However,superhydrophobic(SHB)anti-corrosion surfaces are susceptible to damage,which limit their extensive applications.To this end,a micro/nano structure-functional molecule SHB composite coating with self-healing and active anti-corrosion dual-function properties was designed on Mg alloys substrate.The dual-function SHB composite anti-corrosion coating based on lauric acid(La)intercalated and modified hydrotalcite(La-LDH)consisted of three-layer structure,namely La-LDH powder/polydimethylsiloxane(PDMS)/La-LDH film.The anti-corrosion performance of as-prepared coatings was investigated by potentiodynamic polarization and electrochemical impedance spectroscopy(EIS).The results indicate that the SHB coating shows excellent active corrosion resistance.Moreover,we also examined the self-healing and anti-corrosion properties of SHB coating upon physical damage and explained the healing mechanism.After heat treatment,the damaged SHB coating regain its surface microstructure and corrosion protection property.This work expands new insights for the wide application of Mg alloys and the research in the field of metal protection.展开更多
Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl...Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl@PUA@SiO2(PUA:acrylic polyurethane)gradient hybrid was prepared through plasma-enhanced chemical vapor deposition(PECVD)to achieve efficient microwave absorption and anti-corrosion properties.The organic/inorganic dual coat of PUA/SiO2 not only facilitated the interface polarization but also effectively reduced the dielectric constant and optimized impedance matching.Owing to the unique hybrid structure,the(PECVD-FeSiAl@PUA)@SiO_(2) exhibited highly efficient microwave absorbing performance in frequency bands covering almost the entire Ku-bands(12-18 GHz)with a minimum reflection loss(RLmin)of−47 dB with a matching thickness of 2.3 mm.The organic/inorganic dual protection effectively shields against the corrosive medium,as the corrosion potential and the polarization resistance increased from−0.167 to−0.047 V and 8,064 to 16,273Ω·cm^(2),respectively.While the corrosion current decreased from 3.04×10^(−6) to 2.16×10^(−6) A/cm^(2).Hence,the plasma-enhanced densification of PUA created a strong bridge to integrate FeSiAl and organic/inorganic components acquiring dual-function of efficient microwave absorption and anticorrosion,which opened a promising platform for potential practical absorbers.展开更多
In this study,a novel diethylene triamine penta(methylene phosphonic acid)(DTPMPA)-and graphene oxide(GO)-modified superhydrophobic anodized aluminum(DGSAA)coating was fabricated.The obtained coatings were characteriz...In this study,a novel diethylene triamine penta(methylene phosphonic acid)(DTPMPA)-and graphene oxide(GO)-modified superhydrophobic anodized aluminum(DGSAA)coating was fabricated.The obtained coatings were characterized by scan electron microscopy,X-ray diffraction,Fourier transform infrared spectroscopy,and Raman analysis.After immersion in the supersaturated CaCO_(3) solution for 240 h,the scaling mass of the DGSAA coating is only 50%of that of the SAA coating.The excellent anti-scaling performance of the DGSAA coating comes from three barriers of the air layer,the DTPMPA:Ca^(2+)chelate,and the lamellar GO,as well as the further active anti-scaling of DTPMPA:Ca^(2+)at the coating–solution interface.DTPMPA and GO at the surface of the DGSAA coating exhibit an insertion structure.In the electrochemical impedance spectroscopy measurement,the impedance modulus of the DGSAA coating is three orders-of-magnitude higher than that of the anodized aluminum.The synergistic effect of DTPMPA stored in the porous structure of anodized aluminum and the barrier protection of superhydrophobicity and GO contributes to the excellent comprehensive performance of the DGSAA coating.This research provides a new perspective for designing anti-scaling and anti-corrosion superhydrophobic bi-functional coatings.展开更多
A series of high solid content(30 wt%)epoxy resin(EP)composite coatings reinforced with differently sized cubic boron nitride(CBN)particles were fabricated successfully on 304 L stainless steel.Polydopamine(PDA)was us...A series of high solid content(30 wt%)epoxy resin(EP)composite coatings reinforced with differently sized cubic boron nitride(CBN)particles were fabricated successfully on 304 L stainless steel.Polydopamine(PDA)was used to improve the dispersibility of CBN particles in EP.The structural and morphological features of the CBN particles and the composite coatings were characterized by Raman spectroscopy,scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Moreover,a UMT-3 tribometer and surface profiler were used to investigate the tribological behaviors of the as-prepared composite coatings.Electrochemical impedance spectroscopy(EIS)and Tafel analysis were used to investigate the coatings'anti-corrosion performance.The results demonstrated that the CBN fillers could effectively enhance the tribological and anti-corrosion properties of the EP composite coatings.In addition,when the additive proportion of the microsized(5μm)and nanosized(550 nm)CBN particles was 1:1,the tribological property of the EP composite coatings was optimal for dry sliding,which was attributed to the load carrying capability of the microsized CBN particles and the toughening effect of the nanosized CBN particles.However,when the additive proportion of the microsized and nanosized CBN particles was 2:1,the tribology and corrosion resistance performance were optimal in seawater conditions.We ascribed this to the load-carrying capacity of the microparticles,which played a more important role under the seawater lubrication condition,and the more compact structure,which improved the electrolyte barrier ability for the composite coatings.展开更多
Marine resources and industry have become one of the most important pillars in economic development all over the world.However,corrosion of materials is always the most serious problem to the infrastructure and equipm...Marine resources and industry have become one of the most important pillars in economic development all over the world.However,corrosion of materials is always the most serious problem to the infrastructure and equipment served in marine environment.Researchers have found that microbiologically influenced corrosion(MIC)and marine bio-fouling are two main mechanisms of marine corrosions due to the complicated marine environment and marine organisms.This article summarized the latest research progress about these two mechanisms and indicated that both MIC and marine bio-fouling are closely related to the biofilms on material surfaces formed by the marine microorganisms and their metabolites.As a result,to prevent the occurrence of MIC and bio-fouling,it is important to control the microorganisms in biofilms or prevent the adhesion and formation of biofilms.The traditional method of using chemical bactericide or antifoulant faces the problems of pollution and microorganism resistance.This article introduced four research approaches about the new tendency of applying new materials and technologies to cooperate with traditional chemicals to achieve better and longer effects with lower environment pollution through synergistic actions.Finally,some future research tendencies were proposed for whole marine anti-corrosion and anti-fouling areas.展开更多
基金financialy supported by the National Key R&D Program of China(Grant No.2018YFB0905400)the National Natural Science Foundation of China(Grant Nos.22075331,51702376)+2 种基金the Fundamental Research Funds for the Central Universities(19lgzd02)the Guangdong Pearl River Talents Plan(2019QN01L117)the National Thousand Youth Talents Project of the Chinese Government
文摘For the aqueous Zn-ion battery,dendrite formation,corrosion,and interfacial parasitic reactions are major issues,which greatly inhibits their practical application.How to develop a method of Zn construction or treatment to solve these issues for Zn anodes are still great challenges.Herein,a simple and cheap metal passivation technique is proposed for Zn anodes from a corrosion science perspective.Similar to the metal anticorrosion engineering,the formed interfacial protective layer in a chemical way can sufficiently solve the corrosion issues.Furthermore,the proposed passivity approach can reconstruct Zn surface-preferred crystal planes,exposing more(002)planes and improving surface hydrophilicity,which inhibits the formation of Zn dendrites and hydrogen evolution effectively.As expected,the passivated Zn achieves outstanding cycling life(1914 h)with low voltage polarization(<40 mV).Even at 6 mA cm^(−2) and 3 mA h cm^(−2),it can achieve stable Zn deposition over 460 h.The treated Zn anode coupled with MnO_(2) cathode shows prominently reinforced full batteries service life,making it a potential Zn anode candidate for excellent performance aqueous Zn-ion batteries.The proposed passivation approach provides a guideline for other metal electrodes preparation in various batteries and establishes the connections between corrosion science and batteries.
基金This work was financially supported bythe Doctoral Foundation ofYanshan University(B41)theScience and Technology Foundation ofYanshan University(YDJJ0169).
文摘In order to prepare ornamental and anti-corrosive coating on aluminum alloys, preparation technology of black micro-arc ceramic coatings on Al alloys in silicate based electrolyte was studied. The influence of content of Na2WO4 and combination additive in solution on the performance of black ceramic coatings was studied; the anticorrosion performances of black ceramic coatings were evaluated through whole-immersion test and electrochemical method in 3.5% NaCl solution at different pH value; SEM and XRD were used to analyze the surface morphology and phase constitutes of the black ceramic coatings. Experimental results indicated that, without combination additives, with the increasing of Na2WO4 content in the electrolyte, ceramic coating became darker and thicker, but the color was not black; after adding combination additive, the coating turned to be black; the black ceramic coating was multi-hole form in surface. There was a small quantity of tungsten existing in the black ceramic coating beside α-Al2O3 phase and β-Al2O3 phase. And aluminum alloy with black ceramic coating exhibited excellent anti-corrosion property in acid, basic and neutral 3.5% NaCl solution.
基金financially supported by the National Natural Science Foundation of China(No.51972045,5197021414)the Fundamental Research Funds for the Chinese Central Universities,China(No.ZYGX2019J025)+4 种基金Sichuan Science and Technology Program(No.2020JDRC0015 and No.2020JDRC0045)Sichuan Science and Technology Innovation Talent Project(No.2021JDRC0021)the Vice-Chancellor fellowship scheme at RMIT Universitythe RMIT Micro Nano Research Facility(MNRF)in the Victorian node of the Australian National Fabrication Facility(ANFF)the RMIT Microscopy and Microanalysis Facility(RMMF)to support this work。
文摘Developing highly efficient magnetic microwave absorb-ers(MAs)is crucial,and yet challenging for anti-corrosion properties in extremely humid and salt-induced foggy environments.Herein,a dual-oxide shell of ZnO/Al_(2)O_(3) as a robust barrier to FeSiAl core is introduced to mitigate corrosion resistance.The FeSiAl@ZnO@Al_(2)O_(3) layer by layer hybrid structure is realized with atomic-scale precision through the atomic layer deposition technique.Owing to the unique hybrid structure,the FeSiAl@ZnO@Al_(2)O_(3) exhibits record-high micro-wave absorbing performance in low-frequency bands covering L and S bands with a minimum reflection loss(RLmin)of-50.6 dB at 3.4 GHz.Compared with pure FeSiAl(RLmin of-13.5 dB,a bandwidth of 0.5 GHz),the RLmin value and effective bandwidth of this designed novel absorber increased up to~3.7 and~3 times,respectively.Fur-thermore,the inert ceramic dual-shells have improved 9.0 times the anti-corrosion property of FeSiAl core by multistage barriers towards corrosive medium and obstruction of the electric circuit.This is attributed to the large charge transfer resistance,increased impedance modulus|Z|0.01 Hz,and frequency time constant of FeSiAl@ZnO@Al_(2)O_(3).The research demonstrates a promising platform toward the design of next-generation MAs with improved anti-corrosion properties.
基金This work is financially supported by the National Natural Science Foundation of China (No.2992021).
文摘Methods for evaluating the resistance to cathodic disbondment (RCD) of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests (CDT) have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method (PEM), was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding (CD) were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.
文摘In the study organic-inorganic hybrid composite, epoxy modified silicone coating and vinyl ester flake mastic were comparatively used as several anti-corrosion materials that provided protection for flue gas desulfu-rization (FGD). The relationship between curing conversion rate of hybrid polymer and temperature was investigated by differential scanning calorimeter (DSC). The adhesion strength, coefficient of thermal expansion and flame retardant properties of three anti-corrosion materials were measured and analyzed. A corrosion test in 8% H2SO4 and 5% HCl at temperature cycle of 40°C~ 160°C was applied to study corrosion resistance of several anti-corrosion materials. Gravimetric measurement and morphological observation of three materials before and after corrosion test were comparatively analyzed in the paper. The small weight change and good morphological structure of hybrid composite during corrosion test demonstrate that hybrid composite has better anti-corrosion properties than epoxy modified silicone coating and vinyl ester flake mastic.
基金financially supported by the Creative Research Group Fund Grant of Gansu Province,China(1111RJDA011)。
文摘Novel hybrid coatings on pure magnesium were prepared by combining plasma electrolytic carburizing(PEC)with micro-arc oxidation(MAO)to further enhance the anti-corrosion property in this paper.Scanning electron microscopy(SEM)was used to observe the microstructure of the coatings,meanwhile,energy dispersive spectrometry(EDS)and X-ray diffraction(XRD)were separately used to investigate the elemental as well as phase compositions of the coatings.The anti-corrosion property of the coatings was evaluated by potentiodynamic polarization curves as well as electrochemical impedance spectroscopy(EIS).The results show that PEC process is closely related with the effects of adsorption as well as diffusion of the activated carbon atoms,and it can provide a favorable pretreatment surface with predesigned chemical composition to obtain a new kind of phase,namely Si C with superior corrosion resistance and chemical stability,in the following PEC+MAO hybrid coatings.Meanwhile,PEC preprocessing also can afford an excellent micro-structure to increase the coating thickness as well as to improve the compactness of the PEC+MAO hybrid coatings.During the fabrication process of the PEC+MAO hybrid coatings,an overlapping phenomenon in regard to coating thickness can be observed instead of heaping up layer by layer.Compared with both single PEC surface modification layers as well as single MAO coatings,the PEC+MAO hybrid coatings exhibit more superior anti-corrosion property.Especially,the EIS data reveal that the PEC+MAO hybrid coatings can act as an effective protection system to provide relatively excellent long-range anti-corrosion protection.Note also that employing same MAO technique for both single MAO treatment as well as PEC+MAO combining procedure is the key to this research.
文摘In this work, graphene-modified epoxy-based anti-corrosion coatings were prepared and the influence of graphene on the anti-corrosion performance of the epoxy-based coatings was investigated with water contact angle test ,chemical solution immersion test, and electrochemical test. The water contact angle and chemical solution resistance of the epoxy-based coatings were improved with an increase in graphene content from 0 to 0.4%. These results prove that addition of graphene can significantly improve the hydrophobicity and impermeability of epoxy- based coatings. However, when the graphene content was increased to 0.5%, the performance of the epoxy-based coatings decreased because of graphene aggregation. Tafel polarization results show that graphene addition can significantly reduce the corrosion current density and corrosion potential of epoxy-based coatings, which enhance their anti-corrosion performance.
基金This is supported by the Youth Research Fund of Chinese Academy of Sciences
文摘The effect of cerium dioxide(CeO_2)as an additive on the structure and properties of a melting type coating has been studied by means of microhardness measurement,scanning electron microscopy and thermal analysis. The results show that cerium dioxide can modify the microstructure and tribological properties of the coating. Model LIC-23 composite coating which contains CeO_2 performs well as a self-lubricating coating in hydrochloric acid solution.
基金Financial support from the National Natural Science Foundation of China(No.21676216)Special project of Shaanxi Provincial Education Department,China(20JC034)+1 种基金Basic research program of Natural Science in Shaanxi Province,China(2019JLP-03)Innovation project of college students in Shaanxi Province,China(S202010697054)are gratefully acknowledged.
文摘As a passive anti-icing strategy,properly designed superhydrophobic coatings can demonstrate outstanding performances.However,common preparation strategies for superhydrophobic coatings often lead to environmental pollution,high energy-consumption,high-cost and other undesirable issues.Besides,the durability of superhydrophobic coating also plagues its commercial application.In this paper,we introduced a facile and environment-friendly technique for fabricating abrasion-resistant superhydrophobic surfaces using thermoplastic polyurethane(TPU)and modified SiO_(2)particles(SH-SiO_(2)).Both materials are non-toxicity,low-cost,and commercial available.Our methodology has the following advantages:use of minimal amounts of formulation,take the most streamlined technical route,and no waste material.These advantages make it attractive for industrial applications,and its usage sustainability can be promised.In this study,the mechanical stability of the superhydrophobic surface was evaluated by linear wear test.It is found that the excellent wear resistance of the superhydrophobic coating benefits from the characteristics of raw materials,the preparation strategy,and the special structure.In anti-icing properties test,the TPU/SH-SiO_(2)coating exhibits the repellency to the cold droplets and the ability to extend the freezing time.The electrochemical corrosion measurement shows that the asprepared superhydrophobic surface has excellent corrosion resistance that can provide effective protection for the bare Q235 substrates.These results indicate that the TPU/SH-SiO_(2)coating possesses good abrasion resistance and has great potential in anti-corrosion and anti-icing applications.
文摘A novel enviromental protective water based metallic coating were prepared on the surface of AZ91D magnesium alloy. The properties and structure of the coating were investigated by adhension test, hardness test, heat resisting test, neutral salt spray test and scanning electron microscopy (SEM). The results show that the coating has a stepped structure which can achieve good adhesion of first-grade, heat resistance temperature of 400℃, hardness of HV_ 0.50/30210 and anti-corrosion time of 250h in salt spray test. Meanwhile, the film forming and corrosion mechanism of the coating were also put forward based on the results of the Fourier transform infrared spectroscopy (FTIR) test and electrochemical impedance spectroscopy (EIS) test.
基金supported by the National Natural Science Foundation of China(21878024)the Innovation Team Project of Colleges and Universities in Liaoning Province(2018479-14,LT2015001).
文摘A TiO_(2)@o-vanillin@TEOS-APTES nanocontainer was prepared by an experimental process in which,firstly,2-hydroxy-3-methoxybenzaldehyde(o-vanillin)was loaded in a TiO_(2) container to obtain TiO_(2)@o-vanillin.Then,TiO_(2)@o-vanillin was encapsulated by tetraethyl orthosilicate(TEOS).Finally,3-aminopropyl triethoxysilane(APTES)was used to modify the obtained sample.The morphology,structural phase and thermal stability of the TiO_(2)@o-vanillin@TEOS-APTES nanocontainer were analyzed using scanning electron microscopy(SEM),energy dispersive spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR),X-ray diffractometry(XRD)and thermal gravimetric analysis(TG).The release rate of o-vanillin was investigated using an ultraviolet-visible(UV-vis)spectrometer.The anti-corrosion performances of the epoxy,epoxy@o-vanillin and epoxy@TiO_(2)@o-vanillin@TEOS-APTES coatings on steel sheets were evaluated using an electrochemical method and scarification experiments.The results showed that the impedance value of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating was two orders of magnitude higher than that of the blank epoxy coating,and one order of magnitude higher than that of the epoxy@o-vanillin coating.The maximum inhibition rate of the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating on the steel can reach 97.3%.The scarification experiments confirmed that the epoxy@TiO_(2)@o-vanillin@TEOS-APTES coating had the best anti-corrosion performance.
文摘Through the introduction of the anti-corrosion test schemes, the test equipments and the test procedure for three kinds of basal slop protection materials including fence, mixed stump and geo-textile, this paper comes to a conclusion about the analysis of the anti-corrosion test, revealing that among all of the common basal slop protection materials, mixed stump and fence are with Class II anti-corrosion property, while the geo-textile is with the first-class anti-corrosion property.
基金financially supported by National Natural Science Foundation of China (Nos.51872245, 52103269)the Natural Science Key Foundation of Gansu Province+4 种基金China (No.23JRRA680)the Excellent Doctoral Student Project of Natural Science Foundation of Gansu Province (No.23JRRA695)the Gansu Province University Industrial Support Plan Project (No.2023CYZC-16)the Science and Technology Development Plan Project of Lanzhou City(No.2022-2-78)the Gansu International Scientific and Technological Cooperation Base of Water-Retention Chemical Functional Materials and Longyuan Young Talent for financial support。
文摘In an era where the concept of green development is deeply rooted, magnesium(Mg) alloy as a light metal has a long-term development prospect in the process of energy saving, emission reduction and environmental improvement. However, anti-corrosion performance of Mg alloy is poor due to the high chemical activity and low equilibrium potential, which limits the development of Mg alloy products.Herein, three-dimensional mesopore hollow polypyrrole spheres(MHPS) were prepared, and the MHPS was inserted into the middle of the stacked hexagon boron nitride(h-BN) lamellae, which allowed the hBN to be separated forming a further composite with abundant pore structure. Subsequently, the MHPS/hBN-OH composite was uniformly sprayed on the Mg alloy surface via simple spraying method to form the superhydrophobic surface(SHS). Finally, the slippery liquid infused porous surface(SLIPS) was successfully fabricated by applying drops of silicone lubricant on the superhydrophobic coating surface. After a series of characterization and testing, the results showed that the stacking of h-BN lamellae was significantly reduced after h-BN was successfully embedded by MHPS. In addition, the fabricated SLIPS have excellent self-cleaning, mechanical stability, anti-icing and anti-corrosion properties. Therefore, the method of embedding polymer microspheres not only offers a new strategy for h-BN exfoliation, but also the successful prepared SLIPS largely retards the corrosion of Mg alloy while providing new ideas for the development of SLIPS.
基金supported by the National Natural Science Foundation of China(Nos.51903213 and 5217130190)the Science and Technology Planning Project of Sichuan Province(Nos.2023NSFSC1952 and 2022ZYD0028)+1 种基金the Central Government Guides Local Science and Technology Development Special Funds to freely explore basic research projects(No.2021Szvup124)the Fundamental Research Funds for the Central Universities(No.2682021GF004).
文摘In order to meet the requirements of the marine environment for microwave absorption(MA)materials,we put forward the strategy of constructing multi-functional composite materials,which integrate microwave absorption,anti-corrosion,and antibacterial properties.Herein,graphene oxide(GO)was used as a template to induce the growth of zeolitic imidazolate framework-8(ZIF-8),simultaneously as a two-dimensional(2D)nanocontainers to load corrosion inhibitors to achieve pH-responsive and self-healing properties.Finally,quaternary ammonium salt(dimethyl octadecyl(3-trimethoxylsilyl propyl)ammonium chloride(DMAOP))and sodium ascorbate(VCNa)were introduced to achieve synergistic antibacterial activity and the reduction of GO.The 2D strip-like structure of ZIF-8 was due to the confined growth induced by the electrostatic attraction between ZIF-8 and GO sheets.The as-obtained reduced GO(RGO)/ZIF-8/DMAOP5 exhibited excellent microwave absorption(MA)properties,with a minimum reflection loss(RL)value of-47.08 dB at 12.73 GHz when the thickness was 2.8 mm.Moreover,the effective absorption bandwidth reached 6.84 GHz.After soaking in 3.5%NaCl solution for 35 days,the RGO/ZIF-8/DMAOP5-0.7%coating still achieved an impedance value of 4.585×107Ω·cm^(2) and a protective efficiency of 99.994%,providing superior anti-corrosion properties.In addition,fantastic antibacterial activity was obtained,with the antibacterial rates of RGO/ZIF-8/DMAOP_(10) reaching 99.39%and 100%against Escherichia coli and Staphylococcus aureus.This work could open new avenues towards the development of a new generation of multifunctional MA materials.
文摘This study explores the corrosion issues arising from the coupled combustion of coal and biomass and proposes potential solutions.Biomass,as a renewable energy source,offers advantages in energy-saving and carbon reduction.However,the corrosive effects of alkali metal compounds,sulfur(S)and chlorine(Cl)elements in the ash after combustion cannot be underestimated due to the high volatile content of biomass fuels.We investigate the corrosion mechanisms,as well as the transfer of Cl and alkali metal elements during this process.Comparative corrosion analyses are conducted among coal-fired boilers,pure biomass boilers and boilers with coupled combustion.Various biomass types in co-firing are studied to understand different corrosion outcomes.The main factors influencing corrosion include the physicochemical properties of biomass feedstock,furnace temperature and heating surface materials,with the chemical composition and ash content of biomass playing a dominant role.Currently,the methods used for anti-corrosion include water washing pretreatment of biomass feedstock,application of novel alloys and coatings and the development of additives to inhibit fouling,ash deposition and corrosion.Efficient inhibitors are economical and easy to produce.Additionally,biomass can be converted into biomass gasification gas,although challenges related to tar still need to be addressed.
基金supported by the Fundamental Research Fund(No.2020-JCJQ-JJ-008)the National Natural Science Foundation of China(No.21871020)the Postdoctoral Research Foundation of China(Nos.2021TQ0023,2020M680296,2022T150035 and 2022TQ0022).
文摘Bio-inspired superhydrophobic magnesium(Mg)alloy surfaces are of increasing interest in corrosion protection due to superior barrier and shielding effects.However,superhydrophobic(SHB)anti-corrosion surfaces are susceptible to damage,which limit their extensive applications.To this end,a micro/nano structure-functional molecule SHB composite coating with self-healing and active anti-corrosion dual-function properties was designed on Mg alloys substrate.The dual-function SHB composite anti-corrosion coating based on lauric acid(La)intercalated and modified hydrotalcite(La-LDH)consisted of three-layer structure,namely La-LDH powder/polydimethylsiloxane(PDMS)/La-LDH film.The anti-corrosion performance of as-prepared coatings was investigated by potentiodynamic polarization and electrochemical impedance spectroscopy(EIS).The results indicate that the SHB coating shows excellent active corrosion resistance.Moreover,we also examined the self-healing and anti-corrosion properties of SHB coating upon physical damage and explained the healing mechanism.After heat treatment,the damaged SHB coating regain its surface microstructure and corrosion protection property.This work expands new insights for the wide application of Mg alloys and the research in the field of metal protection.
基金This work was financially supported by the National Natural Science Foundation of China(No.51972045)the Fundamental Research Funds for the Chinese Central Universities,China(No.ZYGX2019J025)Sichuan Science and Technology Program(No.2021YFG0373).
文摘Microwave absorption materials are prone to degradation in extremely humid and salty environments,and it is still challenging to develop a dense and firm interface to protect microwave absorbers.Herein,a robust FeSiAl@PUA@SiO2(PUA:acrylic polyurethane)gradient hybrid was prepared through plasma-enhanced chemical vapor deposition(PECVD)to achieve efficient microwave absorption and anti-corrosion properties.The organic/inorganic dual coat of PUA/SiO2 not only facilitated the interface polarization but also effectively reduced the dielectric constant and optimized impedance matching.Owing to the unique hybrid structure,the(PECVD-FeSiAl@PUA)@SiO_(2) exhibited highly efficient microwave absorbing performance in frequency bands covering almost the entire Ku-bands(12-18 GHz)with a minimum reflection loss(RLmin)of−47 dB with a matching thickness of 2.3 mm.The organic/inorganic dual protection effectively shields against the corrosive medium,as the corrosion potential and the polarization resistance increased from−0.167 to−0.047 V and 8,064 to 16,273Ω·cm^(2),respectively.While the corrosion current decreased from 3.04×10^(−6) to 2.16×10^(−6) A/cm^(2).Hence,the plasma-enhanced densification of PUA created a strong bridge to integrate FeSiAl and organic/inorganic components acquiring dual-function of efficient microwave absorption and anticorrosion,which opened a promising platform for potential practical absorbers.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(Grant No.51925403)the Major Research Plan of the National Natural Science Foundation of China(Grant No.91934302)+2 种基金the National Natural Science Foundation of China(Grant Nos.21676052 and 21606042)the Natural Science Foundation of Heilongjiang Province(Grant No.LH2022B001)the Science Research Foundation of Daqing Normal University(Grant No.2021ZR02).
文摘In this study,a novel diethylene triamine penta(methylene phosphonic acid)(DTPMPA)-and graphene oxide(GO)-modified superhydrophobic anodized aluminum(DGSAA)coating was fabricated.The obtained coatings were characterized by scan electron microscopy,X-ray diffraction,Fourier transform infrared spectroscopy,and Raman analysis.After immersion in the supersaturated CaCO_(3) solution for 240 h,the scaling mass of the DGSAA coating is only 50%of that of the SAA coating.The excellent anti-scaling performance of the DGSAA coating comes from three barriers of the air layer,the DTPMPA:Ca^(2+)chelate,and the lamellar GO,as well as the further active anti-scaling of DTPMPA:Ca^(2+)at the coating–solution interface.DTPMPA and GO at the surface of the DGSAA coating exhibit an insertion structure.In the electrochemical impedance spectroscopy measurement,the impedance modulus of the DGSAA coating is three orders-of-magnitude higher than that of the anodized aluminum.The synergistic effect of DTPMPA stored in the porous structure of anodized aluminum and the barrier protection of superhydrophobicity and GO contributes to the excellent comprehensive performance of the DGSAA coating.This research provides a new perspective for designing anti-scaling and anti-corrosion superhydrophobic bi-functional coatings.
基金the National Natural Science Foundation of China(No.51775540)Key Research Program of Frontier Sciences of the Chinese Academy of Science(No.QYZDY-SSW-JSC009)the Youth Innovation Promotion Association,CAS(No.2017338)。
文摘A series of high solid content(30 wt%)epoxy resin(EP)composite coatings reinforced with differently sized cubic boron nitride(CBN)particles were fabricated successfully on 304 L stainless steel.Polydopamine(PDA)was used to improve the dispersibility of CBN particles in EP.The structural and morphological features of the CBN particles and the composite coatings were characterized by Raman spectroscopy,scanning electron microscopy(SEM),and transmission electron microscopy(TEM).Moreover,a UMT-3 tribometer and surface profiler were used to investigate the tribological behaviors of the as-prepared composite coatings.Electrochemical impedance spectroscopy(EIS)and Tafel analysis were used to investigate the coatings'anti-corrosion performance.The results demonstrated that the CBN fillers could effectively enhance the tribological and anti-corrosion properties of the EP composite coatings.In addition,when the additive proportion of the microsized(5μm)and nanosized(550 nm)CBN particles was 1:1,the tribological property of the EP composite coatings was optimal for dry sliding,which was attributed to the load carrying capability of the microsized CBN particles and the toughening effect of the nanosized CBN particles.However,when the additive proportion of the microsized and nanosized CBN particles was 2:1,the tribology and corrosion resistance performance were optimal in seawater conditions.We ascribed this to the load-carrying capacity of the microparticles,which played a more important role under the seawater lubrication condition,and the more compact structure,which improved the electrolyte barrier ability for the composite coatings.
基金supported by the National Key R&D Program of China(2018YFC1105304)the National Natural Science Foundation of China(Grant Nos.51702106)+1 种基金the Natural Science Foundation of Guangdong Province(2016A030308014)China Postdoctoral Science Foundation(Grant Nos.2017M622686,2018T110865).
文摘Marine resources and industry have become one of the most important pillars in economic development all over the world.However,corrosion of materials is always the most serious problem to the infrastructure and equipment served in marine environment.Researchers have found that microbiologically influenced corrosion(MIC)and marine bio-fouling are two main mechanisms of marine corrosions due to the complicated marine environment and marine organisms.This article summarized the latest research progress about these two mechanisms and indicated that both MIC and marine bio-fouling are closely related to the biofilms on material surfaces formed by the marine microorganisms and their metabolites.As a result,to prevent the occurrence of MIC and bio-fouling,it is important to control the microorganisms in biofilms or prevent the adhesion and formation of biofilms.The traditional method of using chemical bactericide or antifoulant faces the problems of pollution and microorganism resistance.This article introduced four research approaches about the new tendency of applying new materials and technologies to cooperate with traditional chemicals to achieve better and longer effects with lower environment pollution through synergistic actions.Finally,some future research tendencies were proposed for whole marine anti-corrosion and anti-fouling areas.