Comparative study of high temperature anti-oxidation property of sputtering deposited stoichiometric and Si-rich SiC films

Stoichiometric and silicon-rich(Si-rich) SiC films were deposited by microwave electron cyclotron resonance(MWECR) plasma enhanced RF magnetron sputtering method.As-deposited films were oxidized at 800℃,900 ℃,and 1000 ℃in air for 60 min.The chemical composition and structure of the films were analyzed by x-ray photoelectron spectroscopy(XPS),Raman spectroscopy and Fourier transform infrared spectroscopy(FT-IR).The surface morphology of the films before and after the high temperature oxidation was measured by atomic force microscopy.The mechanical property of the films was measured by a nano-indenter.The anti-oxidation temperature of the Si-rich SiC film is 100 ℃ higher than that of the stoichiometric SiC film.The oxidation layer thickness of the Si-rich SiC film is thinner than that of the stoichiometric SiC film in depth direction.The large amount of extra silicon in the Si-rich SiC film plays an important role in the improvement of its high temperature anti-oxidation property.

Anti-oxidation properties of ZrB_2 modified silicon-based multilayer coating for carbon/carbon composites at high temperatures

To improve the anti-oxidation ability of silicon-based coating for carbon/carbon （C/C） composites at high temperatures, a ZrB2 modified silicon-based multilayer oxidation protective coating was prepared by pack cementation. The phase composition, microstructure and oxidation resistance at 1773, 1873 and 1953 K in air were investigated. The prepared coating exhibits dense structure and good oxidation protective ability. Due to the formation of stable ZrSiO4-SiO2 compound, the coating can effectively protect C/C composites from oxidation at 1773 K for more than 550 h. The anti-oxidation performance decreases with the increase of oxidation temperature. The mass loss of coated sample is 2.44% after oxidation at 1953 K for 50 h, which is attributed to the decomposition of ZrSiO4 and the volatilization of SiO2 protection layer.

Fabrication of MoSi;coatings on molybdenum and its high-temperature anti-oxidation properties

Industrial spent MoSi_(2)-based materials were used to fabricate oxidation-resistant coatings on molybdenum via slurry painting in air. The microstructure, phase constituent and high-temperature oxidation behaviors of the coatings at 1500 ℃ were explored. The results show that the bonding layer is generated in the coatings after sintering,which strengthens the metallurgical combination between the coating and the substrate because of the formation of diffusion layers. Rare cracks appear in the coating using pure MoSi_(2)(PM coating) while the coating using spent MoSi_(2)(SM coating) is free of cracks due to decreased thermal expansion mismatch. After oxidation, the oxide scale of PM coating possesses large-sized pores while a relatively dense oxide scale is acquired by SM coating. Compared with PM coating, thinner glassy oxide scale with lower mass gain is obtained by SM coating, exhibiting better anti-oxidation properties at 1500 ℃.

Preparation and Properties of Anti-oxidation Inorganic Nano-coating for Low Carbon Steel at an Elevated Temperature

A new kind of anti-oxidation inorganic nano-coating for the common low carbon steel was prepared. It included magnesite mineral, metallurgic dust and silicate adhesive as the main raw materials. The nano-coating could be sprayed directly onto the low carbon steel slab even though with hot surface as far as under 1000 ℃ . And at the same time, a compact thin nano-film was formed, and the film would inhibit the oxygen into the interface of the steel body and decrease the loss of weight because of oxidation. The loss was decreased by about 60% or more. The properties and mechanism of oxidation resistance of the coating were discussed through XRD, TG-DTA and SEM. The experimental results show that many reactions would happen among the companents of the coating and then many microspheres with the size of 80- 100nm generated in the system. By using the heat of the steel body, the silicate adhesive would interact with the microspheres, and the other components of the coating would be soft and sintered so that when the coating was sprayed onto the suface of the steel slab , the intact and compact film could be formed and adhesive with the steel body. Besides the special properties of anti- oxidation, the coating could prevent the volatilization of microelement in the steel such as silicate and carbon at a high temperature. So it can improve the quality and output of steel with this new kind of nano-coating.

Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile

The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently.

Study on Anti-oxidation and Inhibitory Effect on Nonenzymatic Glycation Reaction of Fermentation Extract from Biotransformation of Ginkgo biloba L. (EGB) by Hericium erinaceus

[ Objective] In order to study the anti-oxidation and inhibitory effect on nonenzymatic glycation reaction of EGB fermentation extraction biotransformed by Hericium erinaceus. [ Method ] The free radical scavenging ability and reducing capacity of DPPH as well as inhibitory rate of nonenzymatic glycation reaction were measured targets for comparing changes of anti-oxidation and inhibitory effect on nonenzymatic glycation reaction of fermentation lyophilizer and fermentation extraction before and after EGB fermention adsorbed by AB-8 macroporous resin. The EGB fermention was biotransformed by Hericium erinaceus. [ Result ] After adsorbed by AB-8 macroporous resin, the bioactive matters were concentrated and separated. The free radical scavenging rate, reducing capacity and inhibitory rate of nonenzymatic glycation reaction were increased significantly after adsorbed by AB-8 macroporous resin. [ Conclusion] AB-8 macroporous resin could be used for preliminary concentration of EGB fermentation which was biotransformed by Hericium erinaceus.

The Technology Research of Anti-oxidation Peptide Preparation by Alkaline Protease Hydrolyzing Wheat Germ Meal

Wheat germ meal is the by production of oil extracting, and a great quantity of it has been wasted, thus the quantity of lost protein is great. In order to use wheat germ meal proteins adequately, wheat germ proteins were hydrolyzed to anti-oxidation peptides by using alkaline protease. Through the single factor analysis and regression analysis, the optimized experiment conditions of hydrolysising wheat germ meal to wheat germ peptides were enzymatic quantity 0.8%（w/w）, material to liquid ratio 1∶12.3, enzymolysis time 2.1 h. Under these conditions, the scavenging effect was 49.78%,the DH was 22% and peptides content in enzymatic hydrolysate was 1.9%（w/w）.By SDS-PAGE electrophoresis,the molecular weight range of wheat germ peptides were below 10 ku and most were between 4.54 and 5.63 ku.The wheat germ proteins could be used ful y and grain resources would be saved.

ANTI-HYPOXIA AND ANTI-OXIDATION EFFECTS OF AMINOPHYLLINE ON HUMAN WITH ACUTE HIGH-ALTITUDE EXPOSURE

Objective To investigate the anti-hypoxia and anti-oxidation effects of aminophylline on human with acute high- altitude exposure. Mothoda Totally 100 young male army members newly recruited from Sichuan province （400 meters above sea level） were enrolled. They were randomly divided into two groups： 50 in aminophylline group （A group） and 50 in control group （ C group）. A group and C group orally took aminophylline and placebo respectively for 10 days, 7 days before entering Lhasa （3 658 meters above sea level） by air and 3 days after it. Several parameters were measured at three time points： before drug taken, 7 days after drug taken, and 3 days after ascending high altitude. These parameters included serum levels of nitric oxide （NO）, superoxide dismutase （SOD）, catalase （CAT）, hydrogen dioxide （H2O2）, lactic acid （LA）, as well as arterial oxygen saturation （SO2）, arterial oxygen partial pressure （PaO2）, and arterial carbon dioxide partial pressure （PaCO2）. Statistical analysis was conducted to compare the difference between two groups with Stata 7.0 software system. Results There were no statistical differences between groups in hypoxia and oxidation indicators before and after drug taken in plain area. Three days after ascending high altitude, the serum levels of SOD, CAT, H202, LA, PaCO2 increased in both groups, yet to a much larger degree in C group than A group （P 〈0. 01 ） ; and NO, SO2 , PaO2 decreased more markedly in C group （ P 〈 0. 05 for NO, P 〈 0. 0001 for SO2 and PaO2 ）. Conclusion Aminophylline has significant anti-hypoxia and anti-oxidation effects at high altitude.

Chemical analysis,antimicrobial and anti-oxidative properties of Daucus gracilis essential oil and its mechanism of action

Objective:To evaluate the essential oils(EO) composition,antimicrobial and antioxidant power of a local plant,Daucus gracilis(D.gracilis).Methods:The aerial parts of D.gracilis were subjected to hydro distillation by a Clevenger apparatus type to obtain the EO which had been analyzed by gas chromatography and gas chromatography coupled with mass spectrometry,and screened for antimicrobial activity against five bacteria and three fungi by agar diffusion method.The mechanism of action of the EO was determined on the susceptible strains by both of time kill assay and lysis experience.The minimal inhibitory concentrations were determined by agar macrodilution and micro-dilution methods.Anti-oxidative properties of the EO were also studied by free diphenyl-2-picrylhydrazyl radical scavenging and reducing power techniques.Results:The EO yielded 0.68(v/w).The chemical analysis presented two dominant constituents which were the elemicin(35.3%) and the geranyl acetate(26.8%).D.gracilis EO inhibited the growth of Bacillus cereus and Proteus mirabilis significantly with minimal inhibitory concentrations of 17.15 μg/mL by the agar dilution method and57.05 μg/mL and 114.1 μg/mL,respectively by liquid micro-dilution.A remarkable decrease in a survival rate as well as in the absorbance in 260 nm was recorded,which suggested that the cytoplasm membrane was one of the targets of the EO.The EO showed,also,important anti-oxidative effects with an IC50 of 0.002 mg/mL and a dosedependent reducing power.Conclusions:D.gracilis EO showed potent antimicrobial and anti-oxidative activities and had acted on the cytoplasm membrane.These activities could be exploited in the food industry for food preservation.

Microstructure of a Mo-Si-C-N multi-layered anti-oxidation coating on carbon/carbon composites by fused slurry

A Mo-Si-C-N multi-layered anti-oxidation coating was in-situ fabricated by introducing nitrogen atmosphere during the fused sintering of Mo-Si slurry pre-layer on carbon/carbon composites. The phase composition and microstructure of the Mo-Si-C-N coating were characterized by X-ray diffractometry, optical microscopy, scanning electron microscopy with energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy. The Mo-Si-C-N coating exhibited a three-layered structure. Besides the MoSi2/Si main-layer and the SiC bonding-layer, a surface layer of about 10 μm in thickness was synthesized on the coating surface. The surface layer mainly consisted of SiC nanowires and contained some Si3N4 and Si phases. SiC nanowires of 10 to 200 nm in diameter presented a terrace and distortion structure. Transmission electron microscopy indicated that the SiC nanowires grew along the preferred 〈111〉 direction. During oxidation test, SiC nanowires transmuted into SiO2 glass, which can play an important role in improving the oxidation resistance of C/C composites.

Preparation and Anti-oxidation Mechanism of Mullite/Yttrium Silicate Coatings on C/SiC Composites

In order to enhance the oxidation resistance of C/Si C composites, mullite/yttrium silicate coatings were fabricated on C/Si C composites through dip-coating route. Al_2O_3-SiO_2 sol with high solid content was selected as the raw material for mullite and ＂silicone resin ＋ Y_2O_3 powder＂ slurry was used to synthesize yttrium silicate. The microstructure and phase composition of coatings were characterized, and the investigation on oxidation resistance and anti-oxidation mechanism was emphasized. The as-fabricated coatings consisting of SiO_2-rich mullite phase and Y_2Si_2O_7 phase show high density and favorable bonding to C/Si C composites. After oxidized at 1 400 ℃ and 1 500 ℃ for 30 min in static air, the coating-containing C/Si C composites possess 91.9% and 102.4% of the original flexural strength, respectively. The desirable thermal stability of coatings and the further densification of coatings due to viscous flow of rich SiO_2 and Y-Si-Al-O glass are responsible for the excellent oxidation resistance. In addition, the coating-containing composites retain 99.0% of the original flexural strength and the coatings exhibit no cracking and desquamation after 12 times of thermal shock from 1 400 ℃ to room temperature, which are ascribed to the combination of anti-oxidation mechanism and preferable physical and chemical compatibility among C/Si C composites, mullite and Y_2Si_2O_7. The carbothermal reaction at 1 600 ℃ between free carbon in C/Si C substrate and rich SiO_2 in mullite results in severe frothing and desquamation of coatings and obvious degradation in oxidation resistance.

Contrastive Study on Content and Anti-oxidation Activity of Total Saponins from Cultivated and Wild Paris Plants in Southwest China

[Objectives]To study content of total saponins from cultivated and wild Paris herbs in Southwest China,evaluate its in vitro antioxidation activity,and explore the correlation between quality of Paris herbs and production place,variety,cultivated and wild varieties.[Methods]Colorimetric method of perchloric acid reaction was used,and content of total saponins from Paris herbs was determined by ultraviolet spectrophotometer at 406 nm. [Results]The lowest content of total saponins from cultivated and wild Paris herbs in Southwest China was0. 55%,while the maximum was 12. 24%,with obvious difference. Total saponins from Paris herbs had stronger clearance ability on free radical DPPH and stronger reduction ability on Fe^(3+),and the results showed good dose-effect relationship with concentration. Among them,S6 had the highest clearance ability on DPPH,which reached 89. 66%. In the determination of reduction ability,the absorbance of S16 reached3. 643 and was the highest,with very good reducing property. Content and anti-oxidation capacity of total saponins from Paris herbs in Southwest China did not have obvious correlation with production place,altitude and cultivation but was related to variety. [Conclusions]The quality of Paris herbs in Southwest China was unstable,and their anti-oxidation abilities were also different,and cultivation could not guarantee high quality. It should normalize cultivation,and develop planting industry of Paris herbs,which could guarantee stable supply of Paris herbs and stability and controllability of quality.

Orthogonal Test Optimization of Extraction Technology of Total Fla-vonoids from Fruits and Leaves of Prunus mume Sieb. et Zucc. and Its in Vitro Anti-oxidation Activity

[Objectives]To optimize the extraction technology of total flavonoids component,and investigate its in vitro anti-oxidation activity.[Methods]The single factor was inspected firstly. By orthogonal experiment,the best extraction conditions of total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. were determined,and reducing ability of the extracted total flavonoids and its DPPH and ABTS scavenging abilities were explored. [Results] The best extraction technology conditions: solid-liquid ratio of 1∶ 50,ethanol concentration of 50%,extraction time of 2. 5 h,extraction temperature of 85 ℃,two-time extraction. By detecting DPPH and ABTS scavenging abilities of total flavonoids,the anti-oxidation activity of the total flavonoids from fruits and leaves of P. mume Sieb. et Zucc. was analyzed and evaluated. [Conclusions]Fruits and leaves of P. mume Sieb. et Zucc. had a certain in vitro anti-oxidation activity,and heat reflux extraction method of its total flavonoids had high extraction rate and simple and convenient operation,which had some practical value.

Properties and Characteristics of Regolith-Based Materials for Extraterrestrial Construction

The construction of extraterrestrial bases has become a new goal in the active exploration of deep space.Among the construction techniques,in situ resource-based construction is one of the most promising because of its good sustainability and acceptable economic cost,triggering the development of various types of extraterrestrial construction materials.A comprehensive survey and comparison of materials from the perspective of performance was conducted to provide suggestions for material selection and optimization.Thirteen types of typical construction materials are discussed in terms of their reliability and applicability in extreme extraterrestrial environment.Mechanical,thermal and optical,and radiation-shielding properties are considered.The influencing factors and optimization methods for these properties are analyzed.From the perspective of material properties,the existing challenges lie in the comprehensive,long-term,and real characterization of regolith-based construction materials.Correspondingly,the suggested future directions include the application of high-throughput characterization methods,accelerated durability tests,and conducting extraterrestrial experiments.

Study on Hydrogen Storage Properties,Anti-Oxide Ability and Rate Limiting Step of ZrCr-Based Alloy after Introducing Cobalt as Additive

In this work,the microstructure,hydrogen storage properties,anti-oxide ability and rate limiting step of Zr(Cr_(1−x)Co_(x))_(2)(x=0,0.2,0.4 and 0.6)alloys have been investigated.After studying the crystal structure,we found that all alloy samples could show C14-type phase but the alloy sample x=0 could also show a small amount of Cr phase.Rietveld fitting showed that lattice parameter and unit cell volume of C14-type phase decreased with increasing x.After further research,it was clear that the first hydrogen absorption capacity decreased with increasing x.But introducing more Co content had a positive influence on the effective hydrogen storage capacity and cyclic hydrogen absorption and desorption properties of the alloy sample.We also found that adding Co to ZrCr_(2)alloy could improve its anti-oxide ability.In addition to this,the rate limiting step model was also studied.

Physical,mechanical and thermal properties of vacuum sintered HUST-1 lunar regolith simulant

Establishing a base on the Moon is one of the new goals of human lunar exploration in recent years.Sintered lunar regolith is one of the most potential building materials for lunar bases.The physical,mechanical and thermal properties of sintered lunar regolith are vital performance indices for the structural design of a lunar base and analysis of many critical mechanical and thermal issues.In this study,the HUST-1 lunar regolith simulant(HLRS)was sintered at 1030,1040,1050,1060,1070,and 1080℃.The effect of sintering temperature on the compressive strength was investigated,and the exact value of the optimum vacuum sintering temperature was determined between 1040 and 1060℃.Then,the microstructure and material composition of vacuum sintered HLRS at different temperatures were characterized.It was found that the sintering temperature has no significant effect on the mineral composition in the temperature range of 1030-1080℃.Besides,the heat capacity,thermal conductivity,and coefficient of thermal expansion(CTE)of vacuum sintered HLRS at different temperatures were investigated.Specific heat capacity of sintered samples increases with the increase of test temperature within the temperature range from-75 to 145℃.Besides,the thermal conductivity of the sintered sample is proportional to density.Finally,the two temperatures of 1040 and 1050℃were selected for a more detailed study of mechanical properties.The results showed that compressive strength of sintered sample is much higher than tensile strength.This study reveals the effects of sintering temperature on the physical,mechanical and thermal properties of vacuum sintered HLRS,and these material parameters will provide support for the construction of future lunar bases.

Effects of Al, Ga, and Ag on the anti-oxidation and wetting reactions of Sn-gZn-X solders

The effects of Ca, Al, and Ag on the anti-oxidation of Sn-9Zn-X solders and the interface reactions between the solders and Cu substrate were investigated by Auger electron spectroscopy （ AES ） and scanning electron microscope （SEM） analysis, respectively. The mechanism of improving the wettability of Sn-9Zn lead-free solder by adding Ca, Al, and Ag was also revealed. The AES analysis indicated that Al and Ga might enrich on the molten solder surface which resulted in improving the anti-oxidation of Sn-9Zn-O. O05Al and Sn-9Zn-O. 3Ga alloys. The addition of Ga reduced the apparent activation energy and promoted the interface reaction. With the addition of 0. 3 wt. % Ag, some scallop-like intermetallic compounds （IMCs） formed at the interface, according to the energy dispersive spectroscopy （EDS） analysis, these scallop-like IMCs might be the mixture of Ag-Zn and Cu-Sn compounds.

High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys

Magnesium(Mg)alloys have shown great prospects as both structural and biomedical materials,while poor corrosion resistance limits their further application.In this work,to avoid the time-consuming and laborious experiment trial,a high-throughput computational strategy based on first-principles calculations is designed for screening corrosion-resistant binary Mg alloy with intermetallics,from both the thermodynamic and kinetic perspectives.The stable binary Mg intermetallics with low equilibrium potential difference with respect to the Mg matrix are firstly identified.Then,the hydrogen adsorption energies on the surfaces of these Mg intermetallics are calculated,and the corrosion exchange current density is further calculated by a hydrogen evolution reaction(HER)kinetic model.Several intermetallics,e.g.Y_(3)Mg,Y_(2)Mg and La_(5)Mg,are identified to be promising intermetallics which might effectively hinder the cathodic HER.Furthermore,machine learning(ML)models are developed to predict Mg intermetallics with proper hydrogen adsorption energy employing work function(W_(f))and weighted first ionization energy(WFIE).The generalization of the ML models is tested on five new binary Mg intermetallics with the average root mean square error(RMSE)of 0.11 eV.This study not only predicts some promising binary Mg intermetallics which may suppress the galvanic corrosion,but also provides a high-throughput screening strategy and ML models for the design of corrosion-resistant alloy,which can be extended to ternary Mg alloys or other alloy systems.

A review on the multi-scaled structures and mechanical/thermal properties of tool steels fabricated by laser powder bed fusion additive manufacturing

The laser powder bed fusion(LPBF) process can integrally form geometrically complex and high-performance metallic parts that have attracted much interest,especially in the molds industry.The appearance of the LPBF makes it possible to design and produce complex conformal cooling channel systems in molds.Thus,LPBF-processed tool steels have attracted more and more attention.The complex thermal history in the LPBF process makes the microstructural characteristics and properties different from those of conventional manufactured tool steels.This paper provides an overview of LPBF-processed tool steels by describing the physical phenomena,the microstructural characteristics,and the mechanical/thermal properties,including tensile properties,wear resistance,and thermal properties.The microstructural characteristics are presented through a multiscale perspective,ranging from densification,meso-structure,microstructure,substructure in grains,to nanoprecipitates.Finally,a summary of tool steels and their challenges and outlooks are introduced.

Tetrahedral framework nucleic acids/hyaluronic acidmethacrylic anhydride hybrid hydrogel with antimicrobial and anti-inflammatory properties for infected wound healing

Bacterial resistance and excessive inflammation are common issues that hinder wound healing.Antimicrobial peptides(AMPs)offer a promising and versatile antibacterial option compared to traditional antibiotics,with additional anti-inflammatory properties.However,the applications of AMPs are limited by their antimicrobial effects and stability against bacterial degradation.TFNAs are regarded as a promising drug delivery platform that could enhance the antibacterial properties and stability of nanodrugs.Therefore,in this study,a composite hydrogel(HAMA/t-GL13K)was prepared via the photocross-linking method,in which tFNAs carry GL13K.The hydrogel was injectable,biocompatible,and could be instantly photocured.It exhibited broad-spectrum antibacterial and anti-inflammatory properties by inhibiting the expression of inflammatory factors and scavenging ROS.Thereby,the hydrogel inhibited bacterial infection,shortened the wound healing time of skin defects in infected skin full-thickness defect wound models and reduced scarring.The constructed HAMA/tFNA-AMPs hydrogels exhibit the potential for clinical use in treating microbial infections and promoting wound healing.