Effect of proximal femur nail anti-rotation on unstable intertrochanteric fractures: A prospective observational study

Objective:To assess the effect of proximal femur nail anti-rotation on the functional and radiological outcome of unstable intertrochanteric fractures.Methods:This prospective observational study was conducted in the orthopedic department of a tertiary care hospital.Altogether 86 patients with unstable intertrochanteric fractures treated with proximal femur nail anti-rotation between January 2010 and January 2015 were included.Patients were followed in the outpatient clinic at regular intervals after discharge to assess the radiological union of fractures and complications.The functional outcomes were evaluated after 2 years by Harris hip score.Results:All patients achieved a radiological union of fractures after a mean duration of 24.6 weeks.The follow up showed 23 complications(systemic and local).Eight patients developed urinary tract infections,and three patients developed chest infections,two patients had screw cut-out,one patient had knee stiffness,one patient developed superficial surgical site infection,and four patients developed varus collapse and shortening subsequently.The two year follow up showed that 69(80.2%)patients had an excellent and good functional outcome according to Harris hip score.Conclusions:With lower complication rates,proximal femur nail is a valid and reasonable option especially in treating unstable intertrochanteric fractures.

Treatment of long-segment fracture in middle-up part of femoral shaft with long proximal femoral nail anti-rotation of AO/ASIF

Objective To investigate the operative method and evaluate the clinical outcomes of long proximal femoral nail anti-rotation (PFNA-long) in treating long-segment fracture in middle-up part of femoral bone.Methods From June 2006 to

Technical note: Anterior cruciate ligament reconstruction in the presence of an intramedullary femoral nail using anteromedial drilling

AIM To describe an approach to anterior cruciate ligament(ACL) reconstruction using autologous hamstring by drilling via the anteromedial portal in the presence of an intramedullary(IM) femoral nail.METHODS Once preoperative imagining has characterized the proposed location of the femoral tunnel preparations are made to remove all of the hardware(locking bolts and IM nail). A diagnostic arthroscopy is performed in the usual fashion addressing all intra-articular pathology. The ACL remnant and lateral wall soft tissues are removed from the intercondylar, to provide adequate visualization of the ACL footprint. Femoral tunnel placement is performed using a transportal ACL guide with desired offset and the knee flexed to 2.09 rad. The Beath pin is placed through the guide starting at the ACL's anatomic footprint using arthroscopic visualization and/or fluoroscopic guidance. If resistance is met while placing the Beath pin, the arthroscopy should be discontinued and the obstructing hardware should be removed under fluoroscopic guidance. When the Beath pin is successfully placed through the lateral femur, it is overdrilled with a 4.5 mm Endobutton drill. If the Endobutton drill is obstructed, the obstructing hardware should be removed under fluoroscopic guidance. In this case, the obstruction is more likely during Endobutton drilling due to its larger diameter and increased rigidity compared to the Beath pin. The femoral tunnel is then drilled using a best approximation of the graft's outer diameter. We recommend at least 7 mm diameter to minimize the risk of graft failure. Autologous hamstring grafts are generally between 6.8 and 8.6 mm in diameter. After reaming, the knee is flexed to 1.57 rad, the arthroscope placed through the anteromedial portal to confirm the femoral tunnel position, referencing the posterior wall and lateral cortex. For a quadrupled hamstring graft, the gracilis and semitendinosus tendons are then harvested in the standard fashion. The tendons are whip stitched, quadrupled and shaped to match the diameter of the prepared femoral tunnel. If the diameter of the patient's autologous hamstring graft is insufficient to fill the prepared femoral tunnel, the autograft may be supplemented with an allograft. The remainder of the reconstruction is performed according to surgeon preference. RESULTS The presence of retained hardware presents a challenge for surgeons treating patients with knee instability. In cruciate ligament reconstruction, distal femoral and proximal tibial implants hardware may confound tunnel placement, making removal of hardware necessary, unless techniques are adopted to allow for anatomic placement of the graft. CONCLUSION This report demonstrates how the femoral tunnel can be created using the anteromedial portal instead of a transtibial approach for reconstruction of the ACL.

Intramedullary nailing for pathological fractures of the proximal humerus caused by multiple myeloma: A case report and review of literature

BACKGROUND Multiple myeloma(MM)bone disease is indicative of MM,and reduces patient life quality.In addition to oncological,antineoplastic systemic therapy,surgical therapy in patients with MM is an essential treatment within the framework of supportive therapy measures and involves orthopedic tumor surgery.Nevertheless,there are few reports on intramedullary(IM)nailing in the treatment of MM-induced proximal humeral fracture to prevent fixation loss.We here describe a case of pathological fracture of the proximal humerus caused by MM successfully treated with IM nailing without removal of tumors and a review of the current literature.CASE SUMMARY A 64-year-old male patient complaining of serious left shoulder pain and limited movement was admitted.The patient was finally diagnosed with MM(IgAλ,IIIA/II).After treatment of the pathological fracture with IM nailing,the patient's function recovered and his pain was rapidly relieved.Histopathological examination demonstrated plasma cell myeloma.The patient received chemotherapy in the Hematology Department.The humeral fracture displayed good union during the 40-mo follow-up,with complete healing of the fracture,and the clinical outcome was satisfactory.At the most recent follow-up,the patient's function was assessed using the Musculoskeletal Tumor Society score,which was 29.CONCLUSION Early surgery should be performed for the fracture of the proximal humerus caused by MM.IM nailing can be used without removal of tumors.Bone cement augmentation for bone defects and local adjuvant therapy can also be employed.

Dynamization of retrograde interlocking intramedullary nail for nonunion of distal femoral intercalary allograft reconstruction:a case report and literatures review

Intercalary allograft reconstruction offers a joint-sparing reconstructive option, but nonunion is a devastating complication. In this article, we want to share our experience of proper dynamization of interlocking intramedullary nail for nonunion after proximal femoral intercalary allograft reconstruction. In this report, a 19-year-old girl was diagnosed proximal femoral fibroblast osteosarcoma （Enneking lib）. After neoadjuvant chemotherapy, she underwent proximal femoral intercalary allograft reconstruction fixed by retrograde interlocking intramedullary nail. At her follow-up point of one year postoperatively, nonunion was observed in the proximal host-allograft junction. Therefore she underwent the second surgery of dynamization of the interlocking intramedullary nail. After 12 months＇ partial and full weight bearing exercise, bone union occurred. Our early observations show that dynamization of interlocking intramedullary nail can still be a useful means to treat nonunion of host- allograft junction if the local condition of the host and allograft bone are good enough.

Clinical and functional comparison of dynamic hip screws and intramedullary nails for treating proximal femur metastases in older individuals

Objective:To compare the outcomes of dynamic hip screws(DHS)and intramedullary nailing(IMN)in the treatment of extra-capsular metastatic carcinoma of the proximal femur.Methods:A retrospective case analysis method was used to examine data of patients with proximal metastatic cancer of the femur who were treated with internal fixation in Department of Orthopaedics,Beijing Friendship Hospital,from January 2007 to December 2018.Blood loss,postoperative pain,functional score,length of stay,and survival rates were compared,and postoperative complications were assessed.Results:Complete follow-up data were available for 33 patients.The mean follow-up period was 12.2±3.6(range:9-32)months and the average age was 72.3±4.7(range:59-83)years old.There were 20 females and 13 males.Twenty-three patients had undergone IMN and 10 DHS,according to bone defects and the patient’s overall condition.The median survival time was 10 months in the IMN group and 11 months in the DHS group.Duration of surgery(t=-7.366,P<0.001)and length of hospital stay(t=-3.509,P<0.001)differed significantly between the two groups.There was one case of breakage of internal fixation in the IMN group.Conclusions:There was no significant difference between DHS and IMN in terms of surgical efficacy.IMN and DHS were different in terms of surgical time and hospital stay.However,due to the limited number of cases in this study,multi-factor analysis has not been performed and needs to be further verified in future analysis.When developing a surgical plan,it is recommended to consider the patient’s condition and the surgeon’s experience.

Biomechanical comparison of distal locking screws for distal tibia fracture intramedullary nailing

Background: Newer generation intramedullary (IM) tibial nails provide several distal interlocking screw options. The objectives were to determine: 1) if the new oblique interlocking option provides superior stability, 2) which screw orientation/ configuration is the most biomechanically stable, and 3) if three distal interlocking screws provide better stability. Methods: A preliminary experiment was performed in torsion, compression, and bending tests with four different screw configurations: (I) one medial-to-lateral and one oblique, (II) two me-dial-to-lateral, (III) one medial-to-lateral and one anterior-to-posterior, and (IV) one medial-to-lateral, one anterior-to-posterior and one oblique in simu-lated distal metaphyseal fracture tibiae. Twenty- four Synthes EXPERT tibial IM nails were used for six specimens of each screw configuration. Parts I and II, tibial IM nails were locked with 5.0 mm in-terlocking screws into simulated distal tibiae (PVC and composite analogue tibia). Part III, the two most stable configurations were tested using five pairs of simulated cadaveric distal tibiae metaphy-seal fractures. Results: Significant differences were attributable to distal screw orientation for intrame- dullary nailing of distal tibia fractures. Configura-tions II and IV were found to be more stable than the other two configurations. No significant differ-ence was detected in construct stability in all modes of testing between Configurations II and IV. Dis-cussion: Configuration I did not provide superior stability for the distal tibia fracture fixation. Con-figurations II and IV provided equivalent stability. When choosing IM fixation for treatment of distal tibia metaphyseal fractures two medial-to-lateral screws provide the necessary stability for satisfac-tory fixation. Clinical Relevance: This study indi-cated an option for operative treatment of distal metaphyseal tibia fracture fixation where preserva-tion of soft tissue and rigid stabilization are needed.

How cross screw length influences the stiffness of intramedullary nail systems

Fractures of long bones are commonly treated with intramedullary (IM) nails and they have been shown to have a very high success rate. Recently we have concerns with the use of the newer IM nailing systems, that uses longer cross screws, which have been developed with variation in implant designs. We believe that the newer implants provide less fracture stability, due to decreased stiffness of the IM nailing system. The aim of this study was to biomechanically determine the influence of the length of cross screw on the stiffness of the IM nailing system, using a composite model. Our test results confirmed our suspicion that the newer IM nailing system using longer cross screw-length is less stiff than traditional nailing systems using shorter cross screw length, during axial loading.

Olecranon anatomy:Use of a novel proximal interlocking screw for intramedullary nailing,a cadaver study

AIM: To define the optimum safe angle of use for an eccentrically aligned proximal interlocking screw(PIS) for intramedullary nailing(IMN).METHODS: Thirty-six dry cadaver ulnas were split into two equal pieces sagitally. The following points were identified for each ulna: the deepest point of the incisura olecrani(A), the point where perpendicular lines from A and the ideal IMN entry point(D) are intersected(C) and a point at 3.5 mm(2 mm safety distance from articular surface + 1.5 mm radius of PIS) posterior from point A(B). We calculated the angle of screws inserted from point D through to point B in relation to D-C and B-C. In addition, an eccentrically aligned screw was inserted at a standard 20° through the anterior cortex of the ulna in each bone and the articular surface wasobserved macroscopically for any damage.RESULTS: The mean A-C distance was 9.6 mm(mean ± SD, 9.600 ± 0.763 mm), A-B distance was 3.5 mm, C-D distance was 12.500 mm(12.500 ± 1.371 mm) and the mean angle was 25.9°(25.9°± 2.0°). Lack of articular damage was confirmed macroscopically in all bones after the 20.0° eccentrically aligned screws were inserted. Intramedullary nail fixation systems have well known biological and biomechanical advantages for osteosynthesis. However, as well as these well-known advantages, IMN fixation of the ulna has some limitations. Some important limitations are related to the proximal interlocking of the ulna nail. The location of the PIS itself limits the indications for which intramedullary systems can be selected as an implant for the ulna. The new PIS design, where the PIS is aligned 20°eccentrically to the nail body, allows fixing of fractures even at the level of the olecranon without disturbing the joint. It also allows the eccentrically aligned screw to be inserted in any direction except through the proximal radio-ulnar joint. Taking into consideration our results, we now use a 20° eccentrically aligned PIS for all ulnas. In our results, the angle required to insert the PIS was less than 20° for only one bone. However, 0.7° difference corresponds to placement of the screw only 0.2 mm closer to the articular surface. As we assume 2.0 mm to be a safe distance, a placement of the screw 0.2 mm closer to the articular surface may not produce any clinical symptoms.CONCLUSION: The new PIS may give us the opportunity to interlock IMN without articular damage and confirmation by fluoroscopy if the nail is manufactured with a PIS aligned at a 20.0° fixed angle in relation to the IMN.

Minimally invasive treatment of forearm double fracture in adult using Acumed forearm intramedullary nail: A case report

BACKGROUND Currently,open reduction internal fixation is the conventional surgical method for treatment of double ulna and radius fracture.However,open reduction is associated with a high risk of complications.This case of forearm double fracture involved a patient treated using an Acumed intramedullary nail.The patient experienced good follow-up outcomes.The Acumed forearm intramedullary nail enables early functional exercise and hastens healing of the fracture.Few studies have reported on the use of this approach for the treatment of fractures.CASE SUMMARY A 23-year-old male patient was admitted to hospital after 5 h of pain,swelling,and limited activity of left forearm caused by a careless fall.Physical examination showed stable basic vital signs,swelling of the left forearm,and severe pain when pressing on the injured part of the forearm.Further,friction was felt at the broken end of the bone;the skin was not punctured.Movement of the left hand was normal,and the left radial artery pulse was normal.Three-dimensional computed tomography examination showed an ulna fracture of the left forearm and comminuted fracture of the radius.The fracture was located in the upper third of the radius,with significant displacement on the fracture side.Clinical diagnosis further confirmed the left radius comminuted fracture and ulna fracture.After analyzing the fracture pattern,age,and other patient characteristics,we chose an Acumed nail for treatment and achieved good follow-up outcomes.CONCLUSION Acumed forearm intramedullary nail for fixation of ulna and radius fracture reduced complication risk and resulted in good follow-up outcomes.

Evaluation of the bone metabolism balance and traumatic reaction of minimally invasive mippo intramedullary nail internal fixation treatment of femoral shaft fractures

Objective:To evaluate the bone metabolism balance and traumatic reaction of minimally invasive mippo intramedullary nail internal fixation treatment of femoral shaft fractures. Methods:80 patients with femoral shaft fractures who were treated in our hospital between May 2011 and December 2016 were collected and divided into control group (n=40) and observation group (n=40) according to random number table, control group received conventional steel plate internal fixation treatment, and observation group received minimally invasive mippo intramedullary nail internal fixation treatment. Differences in serum levels of bone formation indexes, bone resorption indexes, inflammatory factors, and pain mediators and so on were compared between two groups of patients before operation and 1 week after treatment.Results: Before operation, differences in serum levels of bone formation indexes, bone resorption indexes, inflammatory factors and pain mediators were not statistically significant between two groups of patients. After operation, serum bone formation indexes P ICP, BGP, BALP and ALP levels in observation group were higher than those in control group;serum bone resorption indexesβ-CTX and OPG levels were lower than those in control group;serum inflammatory factors IL-1β, IL-6, IL-8 and CRP levels were lower than those in control group;serum pain mediators SP, PGE2 and 5-HT levels were lower than those in control group.Conclusion:Minimally invasive mippo intramedullary nail internal fixation treatment of femoral shaft fractures can promote the bone formation, relatively inhibit bone resorption and cause less traumatic reaction.

Risk Assessment of Retrograde Intramedullary Nailing for Proximal Humeral Fracture

In proximal humeral fracture except AO classification 11A1, fixations with a locking plate and nails are recommended. We performed mechanical tests to investigate whether retrograde intramedullary nailing has fixation stability comparable to those of anterograde intramedullary nailing and locking plate which achieve clinically favorable outcomes. In retrograde intramedullary nailing, a nail entry point is made in the diaphysis, for which reduction of stiffness of the humerus is of concern. Thus, we investigated the influence of a nail entry point made in the diaphysis on humeral strength. Retrograde intramedullary nailing had fixation stability against bending and a force loaded in the rotation direction comparable to those of anterograde intramedullary nail and locking plate. Displacement by the main external force loaded on the humerus, compressive load, was less than half in the bone fixed by retrograde intramedullary nailing compared with that in the bone fixed with a locking plate, showing favorable fixation stability. It was clarified that stiffness of the humerus against rotation and a load in the compression direction is not reduced by a nail entry point made by retrograde intramedullary nailing.

Screw Intramedullary Nailing for Fractures of the Humeral Shaft

The debate continues over the management of diaphyseal fractures of the humerus. There are a variety of extramedullary as well as intramedullary implants. We aim to propose a technique of passing the screw intramedullary nails and achieve union with least trauma to the shoulder and the rotator cuff. The multiple elastic screw nails achieve the inherent stability based on the principle of “three point fixation”. We aim to propose that the screw intramedullary nail is an effective implant to facilitate uneventful fracture union, with rapid recovery, low morbidity and low learning curve capable of being replicated in any smaller operative set up.

Treatment of femur supracondylar fracture with retrograde interlocking intramedullary nails in elderly patients

Objective： To report 32 cases of femur supracondylar fracture treated with retrograde interlocking intramedullary nails in elderly patients. Methods： According to the AO classification, all of 32 cases were classified as extra-articular type A. 32 cases were treated with interlocking intramedullary nail by closed insertion from intercondylar fossa of the knee. All cases accepted CPM exercise as early as possible after operation. Results： Following up 5 to 15 months, all fractures united within an average duration of 5.3 months （4-7 months）. According to the Shelbourne scale, the excellent rate of the knee function was 86.3%. Conclusion： Retrograde interlocking intramedullary nail is useful alternative implant for the treatment of osteoporotic supracondylar fracture of femur, particularly of the type A fracture in the elderly population. Its merits include stable fixation, high rate of fracture union and few complications.

Intramedullary Nailing of Type I and Type II Open Leg Fractures after 6 Hours at Yopougon Teaching Hospital

Emergency debridement has long been the standard of care for open fractures of the tibia as infection is an important complication. In developing countries, patients are admitted to teaching hospitals 6 to 24 hours after their initial trauma. We sought to evaluate outcomes of nailing and correlations between the risk of infection and the delay in surgery. Materials and methods: Medical files of 48 men and 15 women with a combined total of 63 open fractures of the leg during a 12-year period were reviewed. The mean age was 29 years. Thirty-four type I and 29 type II open fractures according to the classification of Cauchoix and Duparc were treated with Küntscher nail after excision/debridement. Preoperative CRP was performed in 27 patients and in 22 cases it was positive. Twenty-six fractures were treated within a period of 6 to 24 hours, and a further 37 was operated on beyond 24 hours. The average waiting time before surgery was 2 days. Results: The infection was present in 11 patients (17.5%). We failed to establish any correlation between the time of treatment and the occurrence of infection for both type I and type II fractures treated during the same intervals with p = 0.244 (p > 0.05). But we established a correlation between the type of open fracture and the occurrence of infection with p = 0.01 (p < 0.05). There were 10 cases of infection among 22 cases of positive preoperative CRP. We couldn’t find a correlation between the positive value of the preoperative CRP and the occurrence of infection. Seven cases of infection were treated with appropriate antibiotherapy and early revision surgery. Four others cases complicated to bone infection (n = 2) and septic nonunion (n = 2). The average time of hospitalization was 22 days. The average time for fracture healing was 7 months. Conclusion: The rule of six hours is hardly applicable in our contexts. Our study showed no correlation between the preoperative period and the occurrence of infection.

Bone metabolism and trauma degree of magnetic-guided intramedullary nail fixation for femoral shaft fracture

Objective:To explore the effect of magnetic-guided intramedullary nail fixation on bone metabolism and trauma degree in patients with femoral shaft fracture.Methods: A total of 128 patients with femoral shaft fractures who received surgical treatment in the hospital between April 2016 and November 2017 were divided into control group (n=64) and study group (n=64) according to the random number table method. Control group received the traditional intramedullary nail treatment, and study group received magnetic-guided intramedullary nail treatment. The differences in serum levels of bone metabolism indexes and inflammatory factors were compared between the two groups 48 h after surgery.Results: 48 h after surgery, serum bone formation indexes BGP, PⅠNP, PⅠCP and BAP levels of study group were higher than those of control group whereas bone resorption indexesβ-CTX, TRACP5b and NTX levels were lower than those of control group;serum inflammatory factors TGF-β, hs-CRP, IL-1β, IL-6 and IL-17 levels were lower than those of control group.Conclusion:Compared with traditional intramedullary nail therapy, magnetic-guided intramedullary nail fixation can more effectively balance the bone metabolism status and reduce the fracture end trauma in patients with femoral shaft fracture.

Trauma and bone metabolism of magnetic navigation intramedullary nail and traditional intramedullary nail fixation treatment of femoral shaft fracture

Objective:To analyze the trauma and bone metabolism of magnetic navigation intramedullary nail and traditional intramedullary nail fixation treatment of femoral shaft fracture. Methods:58 patients with femoral shaft fracture treated in our hospital between December 2011 and December 2015 were divided into observation group and control group by random number table (n=29). Control group received conventional intramedullary nail fixation treatment, and observation group received magnetic navigation intramedullary nail fixation treatment. 24 h after surgery, blood coagulation indexes, enzymology indexes, bone metabolism indexes and angiogenesis indexes were determined;6 months after surgery, bone mineral density levels were determined. Results:24 h after surgery, peripheral blood thrombin time (TT), prothrombin time (PT), and activated partial thromboplastin time (APTT) levels of observation group were significantly higher than those of control group, and serum fibrinogen (FIB), D-Dimer (D-D), lactate dehydrogenase (LDH), creatine kinase (CK), creatine kinase isoenzyme (CKMB), glutamic oxalacetic transaminase (GOT), sex hormone-binding globulin type I (SHBG), collagen cross-linked carboxyl-terminal telopeptide (CTX) and deoxypyridinoline (DPD) content were lower than those of control group while bone gla protein (BGP), insulin-like growth factor (IGF-1), hypoxia-inducible factor-1α (HIF-α), angiogenin 1 (Ang-1), recombinant basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) content were higher than those of control group;6 months after surgery, fracture end bone mineral density (BMD) value of observation group was higher than that of control group. Conclusions:Magnetic navigation intramedullary nail treatment of femoral shaft fracture can more effectively reduce the surgical trauma, improve bone metabolism and increase bone mineral density.

顺行和逆行髓内钉治疗不同部位股骨干骨折的有限元分析

背景:髓内钉治疗股骨干骨折取得了较好的临床疗效,但仍有部分患者并发无菌性骨不连,其原因为机械性不稳定。股骨作为人体最长最大的骨骼,不同部位骨折是否具有不同的生物力学特征,及不同进钉方式对于不同部位骨折端稳定性存在何种影响均研究甚少。目的:分析顺行和逆行髓内钉治疗不同部位股骨干骨折的生物力学特点,评估最佳进钉方式,减少骨不连发生率。方法:选取一名志愿者CT资料导入Mimics 19.0和Geomagic studio 2017软件中进行提取、优化得到右侧股骨三维模型;运用Solidworks 2017软件画出顺行和逆行髓内钉模型并与不同骨折部位股骨干骨折模型按照标准手术技术装配,以STEP格式导入Abaqus 2017软件中设置材料属性参数、边界条件、施加载荷、提交运算,于可视化模块中查看结果。其中上段股骨干骨折顺行和逆行髓内钉分别为A1、A2模型,中段为B1、B2模型,下段为C1、C2模型。结果与结论:(1)A1、B1、C2模型股骨整体应力分布更为均匀,位移、骨折端间隙与成角、股骨近折端骨块内翻均更小;(2)对于上段和中段股骨干骨折,顺行髓内钉具有更好的生物力学效果;对于下段股骨干骨折,逆行髓内钉效果更优。

Intramedullary Nailing of Femoral Shaft Fractures with Compressive Nailing Using Only Distal Dynamic Hole and Proximal Static Hole

Objectives: In this study we aimed to present our treatment results of intramedullary nailing of femoral shaft fractures with compressive nailing using proximal static hole and only distal dynamic hole with one screw. Methods: Forty-three patients who had a fracture of the femoral shaft were managed between 2005 and 2008 with intramedullary nailing and the use of only one screw for distal interlocking. Prospectively we evaluated the union time, possible reoperation, fixation and fracture alignment, range of knee motion and complications. Results: Union occurred within a mean duration of 18.7 weeks. No failures of the fixation and fracture alignment and no more than 1 cm shortness were detected. The knee range of motion was all more than 90 degree. Only one deep venous thrombosis was detected as complication. Conclusions: Compressive nailing using proximal hole and only distal dynamic hole with one screw is a convenient technique for femur fractures.