Effects of Sulfur Fertilizer Application Methods on Grain Protein Content During Filling Stage of Winter Wheat

[ Objective] The experiment aimed to provide a theoretical base of optimal cultivation management for the high yield and good quality and high efficiency of winter wheat. [ Method] The effects of two sulfur fertilizer application methods on dynamic changes of grain protein content and glutenin content of Yumai 49 and Yumai 66 during wheat grain filling stage were studied under the field conditions. [Result] Both the grain protein and glutenin content of two cultivars were increased by sulfur fertilizer, particularly, the effects on Yumai 49 were more significant.[ Conclusion] The grain content and glutenin content of different wheat cultivars could be increased by taking different sulfur fertilizer application methods.

Effects of Different Nitrogen Application Methods on Enzyme Activities in Leaves at Late Growth Stage of Spring Maize

[Objective] This paper aimed at exploring the effects of different nitrogen application methods on the enzyme activities of leaves at ear position in late growth stage of maize. [Method] By pot experiment, the superoxide dismutase （SOD） activity, peroxidase （POD） activity, malonyl dialdehyde （MDA） content and soluble protein content were determined. [Result] At the filling stage and ripening stage, with the increasing of nitrogen application rate, MDA content gradually decreased, while SOD activity, POD activity and soluble protein content increased. MDA content with two topdressing nitrogen was lower than that with one top dressing nitrogen at the same nitrogen application rate, while SOD activity, POD activity and soluble protein content with two topdressing nitrogen were higher than that with one topdressing nitrogen. [Conclusion] Different nitrogen application methods have relatively significant effects on the MDA content, SOD activity, POD activity and soluble protein content, which is of certain directive significance for preventing spring maize prematuration.

Response of Tomato Plants to a New Application Method of Polyolefin-Coated Fertilizer

The response of tomato （Lycopersicon esculentum） plants basically fertilized with 0.3 g N per plant of compound fertilizer with a N：P2O5：K2O ratio of 20：10：20 to sticks of polyolefin-coated fertilizer （POCF） （LongT0 with a N：P2Os：K2O ratio of 14：12：14） applied 23 d after transplanting was investigated using rooting boxes in the greenhouse. The results at 26 and 40 d after stick fertilizer treatment showed that the use of the stick fertilizer greatly increased the production of many new fine roots from the tomato plants. Compared to the unfertilized control, root length and root length density in the stick fertilizer treatment increased by 3.6-6.7 fold. In the soil zones near the stick fertilizer, root weight and root mass density were also significantly higher for the stick fertilizer treatment. Additionally, the use of the stick fertilizer increased the N, P and K concentrations in the leaves and stems of the tomato plants. The new fine roots growing near the stick fertilizer not only absorbed more nutrients and translocated them to the shoots, but also contained more nutrients within themselves. The soil ammonium and nitrate N data showed that N released from the stick fertilizer played a major role in inducing the production of new fine roots. These results indicated that stick fertilizer could be used as an alternative to the co-situs application technique to change and control the root distribution of crops as well as to increase the potential capacity of roots for water and nutrient absorption.

Effects of concentration, distance, and application methods of Altriset （Chlorantraniliprole） on eastern subterranean termite （Isoptera： Rhinotermitidae）

The effects of various concentrations, distance, and application methods of Altriset （Chlorantraniliprole） were investigated against one of the most destructive termites, the eastem subterranean termite, Reticulitermesflavipes Kollar. Three laboratory experiments were conducted. First, we examined the concentration effect of treating the soil contiguously to established foraging tunnels at a fixed 1 m distance. The results demonstrated 100% termite control in 19 d posttreatment at 100 and 50μg/g and 27% termite mortality at 25μg/g. Second, we tested the distance effect of the soil treatment （2 and 4 m） on the efficacy of Altriset to the satellite termite populations at a fixed 50/zg/g concentration. This resulted in 100% termite control in 22 d posttreatment at both 2 and 4 m. Third, we examined the effect of differing application methods using 12.5 and 25μg/g prior to the establishment of foraging tunnels at a fixed 1 m distance. This illustrated 100% termite control in 9 d posttreatment at 25μg/g and 12 d posttreatment at 12.5μg/g. The third experiment demonstrated soil treatments that were applied prior to termite tunnel establishment had greater efficacy than applications made post tunnel construction. Our results provide a comprehensive understanding about the efficacy of Altriset treatments on eastern subterranean termites.

Application of the Gravity Method to the Iron Ore Exploration in Eastern Hebei Province

The nation-wide iron ore exploration is primarily based on aeromagnetic survey,based upon which a series of ground follow-up and drilling examination were carried out,and then reconnaissance and detailed investigation and exploration were fulfilled.However,for some large.

Application of the Embedded-atom Method to Liquid Binary Cu-Ni Alloys

A simple analytic embedded-atom model of monoatoms that includes more than nearest neighbours has been extended to study properties of binary liquid Cu-Ni alloys, here the two-body potential between different species of atoms is taken as a function of the two-body potential for the pure metals with a unique form which yields alloy models with the same invariance to electron density transformations as monoatomic models. Faber-Ziman structure factors have been computed by molecular dynamics simulation on the base of this model. The results are in good agreement with experimental data given by Waseda, thus supporting the overall validity of the approach, especially for cross potential of Cu-Ni pair. Further, a detailed description of structure of binary liquid Cu-Ni alloys with different compositions have been performed using pair analysis and bond orientational order method etc., and then the chemical short range order has also been examined to reveal the structural characterization.

Fast Measurement of Dielectric Conductivity for Space Application by Surface Potential Decay Method

Surface potential decay of polymers for electrical insulation can help to determine the dark conductivity for spacecraft charging analysis. Due to the existence of radiation-induced conductivity, it decays fast in the first few hours after irradiation and exponentially slowly for the remaining time. The measurement of dark conductivity with this method usually takes the slow part and needs a couple of days. Integrating the Fowler formula into the deep dielectric charging equations, we obtain a new expression for the fast decay part. The experimental data of different materials, dose rates and temperatures are fitted by the new expression. Both the dark conductivity and the radiation-induced conductivity are derived and compared with other methods. The result shows a good estimation of dark conductivity and radiation-induced conductivity in high-resistivity polymers, which enables a fast measurement of dielectric conductivity within about 600 rain after irradiation.

Application of Geophysical and Remote Sensing Methods to Predict for Potash Resource

1 Introduction Potassium is listed as one of the shortage of mineral resources in china.Geophysical and remote sensing technology plays an important role in prospecting for potash ressources.

Application of Gravitational Methods to Prospecting Salt(Potash) Rocks in the Kuqa Depression

The Kuqa depression deposited thick rock salt,which has a lower density than surrounding rocks.When salt bodies form a certain scale,obvious negative gravity anomalies can be detected in the surface.Therefore,gravitational method can quickly obtain the shape,plane distribution of deep-seated salt bodies and overall tectonic morphology of the basin.

APPLICATION OF THE METHOD OF THE RECIPROCAL THEOREM TO FINDING DISPLACEMENT SOLUTIONS OF CUBES

In this paper the method of reciprocal theorem is extended to find solutions of three-D problems of elasticity.First we give the basic solution of the cube with six surfaces fixed as the basic system and then using the reciprocal theorem between the basic system acted on by unit concentrated loads and the actual system with prescribed surface displacements, we find displacement solution of the actual system.

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications (NM-TMA) publishes high-quality original research papers on the construction,analysis and application of numerical methods for solving scientific problems.Important research and expository papers devoted to the numerical solution of mathematical problems arising in all areas of science and technology are expected.The journal originates from the journal Numerical Mathematics:A Journal of Chinese Universities (English Edition).

Numerical Mathematics Theory,Methods and Applications

Aims and Scope: Numerical Mathematics:Theory, Methods and Applications(NM-TMA) publishes high-quality original

MIXED HYBRID PENALTY FINITE ELEMENT METHOD AND ITS APPLICATION

The penalty and hybrid methods are being much used in dealing with the general incompatible element, With the penalty method convergence can always be assured, but comparatively speaking its accuracy is lower, and the condition number and sparsity are not so good. With the hybrid method, convergence can be assured only when the rank condition is satisfied. So the construction of the element is extremely limited. This paper presents the mixed hybrid penalty element method, which combines the two methods together. And it is proved theoretically that this new method is convergent, and it has the same accuracy, condition number and sparsity as the compatible element. That is to say, they are optimal to each other.Finally, a new triangle element for plate bending with nine freedom degrees is constructed with this method (three degreesof freedom are given on each corner -- one displacement and tworotations), the calculating formula of the element stiffness matrix is almost the same as that of the old triangle element for plate bending with nine degrees of freedom But it is converged to true solution with arbitrary irregrlar triangle subdivision. If the true solution u?H3 with this method the linear and quadratic rates of convergence are obtianed for three bending moments and for the displacement and two rotations respectively.

APPLICATION OF HARMONIC ANALYSIS METHOD TO RESEARCH ON ROTOR AIRLOADS

According to the rotor vortex theory,the rotor circulation and the rotor induced velocity are developed into Fourier series.The circulation distribution along blade spanwise is expressed in terms of segment-by-segment linear functions.In consequence the induced velocity equations and the circulation equations are derived.The engineering application of the rotor vortex theory is provided.Then the induced velocity and its harmonic components are obtained to provide a quantitative basis for the vortex model.For calculating each harmonic component of the induced velocity a simplified method is put forward which considers the effects of each order circulation with neglecting those of higher order.The method saves the computer time and is of significant benefit.

THE APPLICATION AND EXTENSION OF SACHS METHOD

In this paper,we present the simplification of Sachs formulas for the measurement and calculation of the residual stresses of the cylinder only with the plane stresses. Furthermore, we present the method for the measurement and calculation of the residual stresses of the cylinder not only with the finite length but with the longitudinal stress. These can be applied to the investigation on the residual stresses of the autofretted gun tube.

Effectuate Application of Optimum Methods in Grinding Process

Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.

A NOVEL POLYMER ENZYME LINKED IMMUNOASSAY METHOD AND ITS APPLICATIONS

During the course of study, we found that both poly (N-isopropylacrylamide ) (PNIP) and PNIP-Ab (enzyme-labelled antibody)could be adhere tightly to a cellulose acetale-nitrate membrane, and that the retention of PNIP-Ab on the membrane increased over 30-fold when compared with the unconjugated Ab.Thus we used this characteristic to develop a novel immunoassay method-polymer enzyme linked immunoassay method: homogeneous antigen-antibody reaction and heterogeneous separation process. When applied for detection of human serum HBsAg, this immunoassay system can detect as little as 1 ng/ml of human serum HBsAg.

THE APPLICATION OF BOUNDARY ELEMENT METHOD IN STRESS ANALYSIS OF AUTOFRETTED TUBE WITH NOTCH

In this paper, the boundary element method is applied to investigate the internal state of stress of autofretted tube with notch and the calculated results are important in the practical design.