Effects of Neodymium Application Mode on Resistance to Fusarium Wilts in Cucumbers

The effects of neodymium application mode on the disease index, PAL, POD and PPO activity, content of lignin and generation rate of ·O2^- in cucumbers were investigated by pot experiment. The results suggest that the disease index decreases after spraying Nd^3＋. Relative protection effects of at-the-same-time-group, induced-group and therapy-group are 7.51%, 27.14% and 11.51%. The PAL activity of Nd ＋ Fo treatment in at-the-same-time-group, induced-group and therapy-group increases by 9.86%, 48.57% and 4.97% respectively compared with that of Fo treatment. The POD activity decreases by 27.52%, 35.87% and 7.67%. The PPO activity increases by 5.75%, 36.58% and 52.19%. The ·O2^- generation rate decreases by 9.49%, 28.08% and 25. 21%.

An Efficient Three-Dimensional Coupled Normal Mode Model and Its Application to Internal Solitary Wave Problems

We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forward scattering dominates. At the same time, this model provides an efficiency gain of an order of magnitude or more over two-way coupled-mode models. This model can be applied to three-dimensional range-dependent problems with a slowly varying bathymetry or internal waves. A numerical example of the latter is demonstrated in this work. Comparisons of both accuracy and efficiency between the present model and a benchmark model are also provided.

Nitrogen management improves lodging resistance and production in maize(Zea mays L.)at a high plant density

Lodging in maize leads to yield losses worldwide.In this study,we determined the effects of traditional and optimized nitrogen management strategies on culm morphological characteristics,culm mechanical strength,lignin content,root growth,lodging percentage and production in maize at a high plant density.We compared a traditional nitrogen(N)application rate of 300 kg ha–1(R)and an optimized N application rate of 225 kg ha^(–1)(O)under four N application modes:50%of N applied at sowing and 50%at the 10th-leaf stage(N1);100%of N applied at sowing(N2);40%of N applied at sowing,40%at the 10th-leaf stage and 20%at tasseling stage(N3);and 30%of N applied at sowing,30%at the 10th-leaf stage,20%at the tasseling stage,and 20%at the silking stage(N4).The optimized N rate(225 kg ha^(–1))significantly reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.The optimized N rate significantly increased internode diameters,filling degrees,culm mechanical strength,root growth and lignin content.The application of N in four split doses(N4)significantly improved culm morphological characteristics,culm mechanical strength,lignin content,and root growth,while it reduced internode lengths,plant height,ear height,center of gravity height and lodging percentage.Internode diameters,filling degrees,culm mechanical strength,lignin content,number and diameter of brace roots,root volume,root dry weight,bleeding safe and grain yield were significantly negatively correlated with plant height,ear height,center of gravity height,internode lengths and lodging percentage.In conclusion,treatment ON4 significantly reduced the lodging percentage by improving the culm morphological characteristics,culm mechanical strength,lignin content,and root growth,so it improved the production of the maize crop at a high plant density.

Effect of Mode of Auxin Application on Rooting and Bud Break of Shea Tree (Vitellaria paradoxa) Cuttings

Vegetative propagation by stem cutting is an important technique applied for agricultural production where rooting success is one of the major aspects. A study to assess the effects of mode of application of rooting hormones (IBA) on adventitious root formation of V. paradoxa stem cuttings was conducted. Accordingly, four application methods were investigated in a 4 × 3 factorial experiment using a Completely Randomized Design (CRD). The application methods were: 24-hour extended soak, foliar spraying, basal quick dip and delayed IBA application method. Thus, the parameters used to determine rooting success were mean root length and root number. The effect of these application methods on occurrence of bud break was also considered. On the whole, root length was observed to be a function of IBA concentration, whereby root length increased significantly (P ≤ 0.05) with an increment in IBA concentration. Stem cuttings subjected to 24-h extended soak at 100 ppm rooted best (59.5% ± 8.33%), where as foliar sprayed stem cuttings exhibited the worst rooting success (11.9 ± 3.06 - 23.8% ± 4.16%). Bud break appeared to decrease with increasing IBA concentration and delaying IBA application enhanced rooting percentage of the quick dip method by 7.1%, 9.5% and 11.9% at 2500 ppm, 3500 ppm and 4500 ppm, respectively. The extended soak method of IBA application at 80 ppm shows potential for large scale production of V. paradoxa through stem cuttings.

Application Analysis of Computer Technology in Composite Mapping

In the process of architectural composite drawing,due to its cumbersome process,the work efficiency of manual drawing alone is low,and the accuracy is difficult to ensure.By using computer technology to carry out composite drawing,we can not only improve the drawing accuracy,but also save a lot of manpower and material resources.At present,the commonly used computer composite drawing technologies include AutoCAD,3ds max,BIM,etc.This paper analyzes these technology types in detail to provide reference for architectural composite drawing.

Applied whispering gallery modes on ZnO nanorods coated glass for humidity sensing application

In this letter,a humidity sensor is demonstrated by applying a whispering gallery mode(WGM)from a microsphere resonator onto the ZnO nanorods coated glass surface.The diameter of the microsphere was 234μm and the glass surface was coated with ZnO nanorods using the hydrothermal method at growth duration of 12 h.A significant response to humidity level ranging from 35%RH to 85%RH has been observed with the sensitivity of 0.0142 nm/%RH.The proposed humidity sensor has successfully employed to enhance interaction between the whispering gallery mode evanescent and surrounds analyte with the assistance of ZnO nanorods coated glass.

Study on the Diffusion Performance of Standard E-Government Information Systems

Standard e-government information system(SEIS) including mobile-government applications are playing more and more important roles in the establishing of national e-government framework. It can be beneficial not only for avoiding redundant e-government IS development but also for improving collaboration among government agencies. Two research questions were explored: what are the factors influencing the performance of SEIS? Will mandatory SEIS create a better performance than non-mandatory SEIS? Specifically, the use of five categories of IS aspects--information system quality, online service quality, offline service quality, diffusion modes and standard network size—is proposed to understand the performance of SEIS through applying both survey study and simulation study. The results show that information system quality and online service quality of SEIS have strong effects on users' expectation and users' satisfaction, which thereafter promotes the performance of SEIS. Government agencies' offline service quality shows a significant effect on users' satisfaction while not on users' expectation. Furthermore, the diffusion speed of SEIS in non-mandatory and mandatory modes and the standard network size also have great influence on the utility of SEIS.