The inner hole parts played an oriented or supporting role in engineering machinery and equipment,which are prone to appear surface damages such as wear,strain and corrosion. The precise pulse plasma arc powder weldin...The inner hole parts played an oriented or supporting role in engineering machinery and equipment,which are prone to appear surface damages such as wear,strain and corrosion. The precise pulse plasma arc powder welding method is used for surface damage repairing of inner hole parts in this paper. The working principle and process of the technology are illustrated,and the microstructure and property of repairing layer by precise pulse plasma powder welding and CO2 gas shielded welding are tested and observed by microscope,micro hardness tester and X-ray residual stress tester etc. Results showed that the substrate deformation of thin-walled inner hole parts samples by precise pulse plasma powder welding is relatively small. The repair layer and substrate is metallurgical bonding,the transition zones( including fusion zone and heat affected zone) are relatively narrow and the welding quality is good. It showed that the thin-walled inner hole parts can be repaired by this technology and equipment.展开更多
An approach was presented for synthesis of semiconducting single-walled carbon nanotubes(SWNTs) by sulfur(S) doping with the method of graphite arc discharge. Raman spectroscopy, UV-vis-NIR absorption spectroscopy and...An approach was presented for synthesis of semiconducting single-walled carbon nanotubes(SWNTs) by sulfur(S) doping with the method of graphite arc discharge. Raman spectroscopy, UV-vis-NIR absorption spectroscopy and electronic properties measurements indicated the semconducting properties of the SWNTs samples. Simulant calculation indicated that S doping could induce convertion of metallic SWNTs into semiconducting ones. This strategy may pave a way for the direct synthesis of pure semiconducting SWNTs.展开更多
The experimental apparatus by self-designed was used,Fe/Co particles encapsulated in multi-walled carbon nanotubes(MWCNTs) were prepared by the method of anodic arc discharging plasma. The products were characterized ...The experimental apparatus by self-designed was used,Fe/Co particles encapsulated in multi-walled carbon nanotubes(MWCNTs) were prepared by the method of anodic arc discharging plasma. The products were characterized by transmission election microscopy,Raman spectroscopy and X-ray diffractometry. The magnetic properties of the products were characterized with vibration sample magnetometer. The TEM results show that MWCNTs have little impurity and good particles size,and Fe/Co with high continuity encapsulaties in carbon nanotubes. The saturated magnetization(σs),remanence(σm) and coercivity(Hc) of the sample are 17.30 A/(m·kg),3.96 A/(m·kg) and 31 521.60 A/m,showing better ferromagnetism compared with the bulk Fe/Co. The optimal conditions in this case are as follows:a helium gas atmosphere of 6.0×104 Pa,an arc current of 70 A,a voltage drop of 24 V,a constant distance of about 2 mm between the anodes and cathode,metallic powder contents of Fe and Co of 15.0%(mass fraction) and 15.0%,respectively,and well cooled electrodes and collector. This process is a convenient and effective that Fe/Co particles can be encapsulated in MWCNTs.展开更多
文摘The inner hole parts played an oriented or supporting role in engineering machinery and equipment,which are prone to appear surface damages such as wear,strain and corrosion. The precise pulse plasma arc powder welding method is used for surface damage repairing of inner hole parts in this paper. The working principle and process of the technology are illustrated,and the microstructure and property of repairing layer by precise pulse plasma powder welding and CO2 gas shielded welding are tested and observed by microscope,micro hardness tester and X-ray residual stress tester etc. Results showed that the substrate deformation of thin-walled inner hole parts samples by precise pulse plasma powder welding is relatively small. The repair layer and substrate is metallurgical bonding,the transition zones( including fusion zone and heat affected zone) are relatively narrow and the welding quality is good. It showed that the thin-walled inner hole parts can be repaired by this technology and equipment.
基金supported by National Natural Science Foundation of China No.50730008Shanghai Science and Technology Grant No.0752nm015National Basic Research Program of China No.2006CB300406
文摘An approach was presented for synthesis of semiconducting single-walled carbon nanotubes(SWNTs) by sulfur(S) doping with the method of graphite arc discharge. Raman spectroscopy, UV-vis-NIR absorption spectroscopy and electronic properties measurements indicated the semconducting properties of the SWNTs samples. Simulant calculation indicated that S doping could induce convertion of metallic SWNTs into semiconducting ones. This strategy may pave a way for the direct synthesis of pure semiconducting SWNTs.
基金Project (ZS-011-A25-007) supported by the Natural Science Foundation of Gansu province, China
文摘The experimental apparatus by self-designed was used,Fe/Co particles encapsulated in multi-walled carbon nanotubes(MWCNTs) were prepared by the method of anodic arc discharging plasma. The products were characterized by transmission election microscopy,Raman spectroscopy and X-ray diffractometry. The magnetic properties of the products were characterized with vibration sample magnetometer. The TEM results show that MWCNTs have little impurity and good particles size,and Fe/Co with high continuity encapsulaties in carbon nanotubes. The saturated magnetization(σs),remanence(σm) and coercivity(Hc) of the sample are 17.30 A/(m·kg),3.96 A/(m·kg) and 31 521.60 A/m,showing better ferromagnetism compared with the bulk Fe/Co. The optimal conditions in this case are as follows:a helium gas atmosphere of 6.0×104 Pa,an arc current of 70 A,a voltage drop of 24 V,a constant distance of about 2 mm between the anodes and cathode,metallic powder contents of Fe and Co of 15.0%(mass fraction) and 15.0%,respectively,and well cooled electrodes and collector. This process is a convenient and effective that Fe/Co particles can be encapsulated in MWCNTs.
