Experimental Study on Vortex-Induced Vibration of Rough Risers with Coupling Interference Effect Under Side-by-Side Arrangement

A vortex-induced vibration(VIV)experiment of rough risers with coupling interference effect under a side-by-side arrangement was carried out in a wave-current combined flume.The roughness of the riser was characterized by arranging different specifications of surface attachments on the surface of the riser.Rough risers with three different roughnesses were arranged side by side with smooth risers to explore the VIV response of the riser under the combined action of roughness and interference effect,and to reveal the coupling mechanism between roughness and interference effect.The experimental results show that,compared with that of a smooth riser,the VIV of a rough riser under the coupling interference effect has a wider"lock-in"region,and the displacement decreases more significantly at a high reduced velocity,which is more likely to excite higher-order modes and frequency responses.In addition,the displacement response and frequency response of the smooth riser are not significantly affected by wake interference from the rough riser,which is caused by the decrease of the wake region due to the delay of the boundary layer separation point of the rough riser.

Experimental Study on Vortex-Induced Vibration of Rough Risers Coupling with Interference Effect in Tandem Arrangement

In order to study the response law of vortex-induced vibration(VIV)of marine risers under the combined action of roughness and interference effects,and to reveal the coupling mechanism of roughness and interference effects on the riser,a VIV experiment of rough risers in tandem arrangement was conducted in a wave−current combined flume.The experiment characterized the risers’roughness by arranging different specifications of attachments on the surface of the risers.Three rough risers with different roughness and smooth risers were arranged in tandem arrangement,with the rough risers arranged downstream.The experimental results indicate that the suppression of the attachments on the downstream risers’vibration are more significant both in the CF and IL directions as the reduced velocity increases.For the downstream riser,the amplitude response of rough riser is more significantly weakened compared with the smooth one at high reduced velocity.For the upstream risers,changes in the roughness and spacing ratio have an impact on their‘lock-in’region.When the roughness of downstream risers is relatively large(0.1300)and the spacing between risers is small(S/D=4.0),the reduced velocity range of‘lock-in’region in the CF direction of upstream risers is obviously expanded,and the displacement in the‘lock-in’region is severer.

Interaction Mechanisms between Natural Debris Flow and Rigid Barrier Deflectors:A New Perspective for Rational Design and Optimal Arrangement

Rigid barrier deflectors can effectively prevent overspilling landslides,and can satisfy disaster prevention requirements.However,the mechanisms of interaction between natural granular flow and rigid barrier deflectors require further investigation.To date,few studies have investigated the impact of deflectors on controlling viscous debris flows for geological disaster prevention.To investigate the effect of rigid barrier deflectors on impact mechanisms,a numerical model using the smoothed particle hydrodynamics(SPH)method with the Herschel–Bulkley model is proposed to simulate the interaction between natural viscous flow and single/dual barriers with and without deflectors.This model was validated using laboratory flume test data from the literature.Then,the model was used to investigate the influence of the deflector angle and multi-barrier arrangements.The optimal configuration of multi-barriers was analyzed with consideration to the barrier height and distance between the barriers,because these metrics have a significant impact on the viscous flow pile-up,run-up,and overflow mechanisms.The investigation considered the energy dissipation process,retention efficiency,and dead-zone formation.Compared with bare barriers with similar geometric characteristics and spatial distribution,rigid barriers with deflectors exhibit superior effectiveness in preventing the overflow and overspilling of viscous debris flow.Recommendations for the rational design of deflectors and the optimal arrangement of multi-barriers are provided to mitigate geological disasters.

The Application of Piano in Chinese Pop Music Arrangements

By exploring the application of piano in Chinese pop music arrangements,this article aims to enhance the understanding of the position of piano in pop music and provide useful insights and references for the future development of Chinese pop music.Starting from the unique position of piano in Chinese pop music arrangements,the article analyses in detail the specific applications of piano in Chinese pop music arrangements.The analysis finds that the piano has been deeply integrated into the bloodline of Chinese popular music and become an indispensable part.From simple melodic embellishments to complex arrangement ideas,the piano has injected endless vitality and vigor into popular music with its unique timbre and expressive power.

Generation of irregular particle packing with prescribed statistical distribution, spatial arrangement, and volume fraction

A method for packing irregular particles with a prescribed volume fraction is proposed.Furthermore,the generated granular material adheres to the prescribed statistical distribution and satisfies the desired complex spatial arrangement.First,the irregular geometries of the realistic particles were obtained from the original particle images.Second,the Minkowski sum was used to check the overlap between irregular particles and place an irregular particle in contact with other particles.Third,the optimised advance front method(OAFM)generated irregular particle packing with the prescribed statistical dis-tribution and volume fraction based on the Minkowski sum.Moreover,the signed distance function was introduced to pack the particles in accordance with the desired spatial arrangement.Finally,seven biaxial tests were performed using the UDEC software,which demonstrated the accuracy and potential usefulness of the proposed method.It can model granular material efficiently and reflect the meso-structural characteristics of complex granular materials.This method has a wide range of applications where discrete modelling of granular media is necessary.

Conductor Arrangement and Phase Sequence Optimization Scheme for 500 kV Four-Circuit Transmission Lines on Same Tower

The four-circuit parallel line on the same tower effectively solves the problems faced by the line reconstruction and construction under the condition of the increasing shortage of transmission corridors.Optimizing the conductor and phase sequence arrangement of multiple transmission lines is conducive to improving electromagnetic and electrostatic coupling caused by electromagnetic problems.This paper uses the ATP-EMTP simulation software to build a 500 kV multi-circuit transmission line on the same tower.It stimulates the induced voltage and current values of different line lengths,tower spacing,vertical and horizontal spacing between different circuits,phase sequence arrangement,and nominal tower height.Moreover,use the BP neural network optimized by a genetic algorithm to predict the induced voltage and current under the unknown conductor and phase sequence arrangement.Finally,based on multi-objective particle swarm algorithm to construct the optimization model of conductor arrangement scheme of overhead transmission line,combined with electromagnetic environment control index,determine the optimal conductor arrangement scheme by the size of particle fitness function,a significant reduction in induced voltages and currents between transmission lines and the four-circuit conductor layout scheme meeting the requirements of the electromagnetic environment is obtained,which provides a reference for the tower design of the transmission station project.

Effects of Spatial Row Arrangement and Time of Planting Intercrops on Performance of Groundnut (Arachis hypogaea L.) under Maize (Zea mays L.)—Groundnut Intercropping System in Ejura

In monoculture, crop failure due to biotic or abiotic causes can result in partial or total output failure. The yield, socio-economic, and environmental effects of intercropping on the farmer and the environment as a whole have not received much attention. There is a dearth of knowledge on the productivity of maize-groundnut intercrops in Ghana regarding the relative timing of planting and spatial arrangement of component crops. Therefore, the objective of the study was to determine the effects of spatial row arrangement and the time of planting intercrops on the productivity of groundnut under maize-groundnut intercropping. The 5 × 3 factorial field experiment was undertaken at the Miminaso community in the Ejura-Sekyedumase municipality of the Ashanti Region of Ghana during the 2020 cropping seasons. Treatments were evaluated in a Randomized Complete Block Design (RCBD) with three replicates. The levels of row arrangement of intercrops were: one row of maize and one row of groundnut (1M1G), one row of maize and two rows of groundnut (1M2G), two rows of maize and one row of groundnut (2M1G), two rows of maize and two rows of groundnut (2M2G), sole maize and sole groundnut (M/G). The levels of time of introducing groundnut included simultaneous planting of intercrops (0 WAP), planting groundnut one week after planting maize (1 WAP) and planting groundnut two weeks after planting maize (2 WAP). There were significant (P 0.05) treatment interactions for pod and seed yields of groundnut throughout the study. The highest groundnut pod yields of 1815.00 kg/ha and 2359.00 kg/ha were recorded by the 0WAP × 1M2G treatment in the major and minor seasons of 2020, respectively, while the highest groundnut seed yields of 741.00 kg/ha and 726.00 kg/ha were recorded in the major and minor rainy seasons of 2020 by 1WAP × G and 0WAP × G treatments, respectively. The highest seed yields of groundnut (404 kg/ha and 637 kg/ha for major and minor rainy seasons, respectively) were produced by 1WAP × 2M2G.

Tooth arrangement design of retractable DTH hammer bit used for drilling while casing

Down-the-hole(DTH)hammer with casing while drilling(CWD)is a technology that has been proven to be able to alleviate many of the problems faced by complex formations.However,the drill bit is suffered from rapid wear,low drilling efficiency,and high energy consumption due to the unreasonable tooth arrangement and impact energy selection in drilling process,which affect the application effect of this technology.ABAQUS software was used for numerical simulation of rock breaking behavior under impact load with the single,three,and five teeth arrangement drill bit respectively,to improve the application effect and solve the aforementioned technical problems.Based on the calculated parameters of tooth arrangement,we designed a novel drill bit for hard rocks and provided a theoretical basis for the tooth arrangement of largediameter drill bits.

低透煤层瓦斯超前排放钻孔布置方式优化研究

目的为有效解决低透气性煤层瓦斯突出问题,有效消除阵列布孔方式带来的瓦斯排放盲区以及对角圆相切布孔方式造成的钻孔数量增加、重复排放等问题。方法通过理论分析,在超前排放钻孔有效排放半径一定的情况下提出阵列菱形法优化超前排放孔的布置方式(R为有效排放半径,煤层走向排放孔的间距为√3R),其钻孔数量约为对角圆相切法的3/4,重复排放面积减少至11%,减少了对角圆相切布孔方式的重复排放面积,减少了钻孔的数量。结果运用COMSOL Multiphysics对阵列菱形法布孔方式进行数值模拟运算,结果表明,阵列菱形法布孔方式排放20 d后,钻孔有效排放半径内整体瓦斯压力低于0.5 MPa,排放100 d后瓦斯压力低于0.30 MPa,卸压效果优于对角圆相切布孔方式的。将阵列法和对角圆相切法两种布孔方式排放100 d时钻孔周围的瓦斯压力分布情况与阵列菱形法布孔方式排放20 d时的分布情况交叉对比,发现阵列菱形法布孔方式卸压速率更快,卸压范围更广。结论提出阵列菱形法设计钻孔布孔方式,并运用COMSOL Multiphysics对3种钻孔布孔方式的卸压情况进行数值模拟运算,对比发现,阵列菱形法钻孔布孔方式比阵列法和对角圆相切法布孔方式更具优势,且在相同时间内卸压速率更快、卸压范围更广,对低透煤层预防瓦斯突出具有重要的意义。

数字经济与实体经济融合的制度安排

数字经济与实体经济融合是建设现代化产业体系的现实需要,也是推动实体经济高质量发展的内在要求。然而,数据产权、交易、分配和治理制度不健全、核心技术存在短板、数字技术与传统产业脱节、寡头垄断平台“一家独大”、数字基础设施供求不匹配、数字鸿沟较大为数字经济与实体经济融合带来了现实挑战。数据要素制度、数字技术制度、数字产业制度、数字平台制度、数字基础设施制度可为数字经济与实体经济融合发展提供关键内核、强劲动能、生态体系、中介载体和坚实底座。因此,数字经济与实体经济走向深度融合需要加强相关的制度安排,未来应完善以“数据二十条”为核心的数据要素制度、“卡脖子”技术攻关制度、数字产业融合制度、数字平台治理制度、数字基础设施共投共建共享制度和数字鸿沟弥合制度。

认知负荷理论视域下教材插图编配研究

认知负荷理论是一种适合解释教材插图学习的理论,它认为学习者的学习活动主要在容量有限的工作记忆中进行,工作记忆有两条信息加工通道,分别负责处理文字内容和图片内容。有待工作记忆处理的文字内容和图片内容要彼此对应,编配方式应有利于学习者整合图文信息,且不宜让学习者的工作记忆负荷过重。在现行教材的代表性样本中,教材编配的大部分插图与文字内容相对应,教材主要采用嵌入、邻近、内容关联词、符号标志关联词等技术帮助学生建立插图与相应文字内容之间的联系,但插图与文字的有效关联技术运用得较少,教材插图的编配缺乏明确的规范。为规范教材插图的编配,应将“对应”作为插图选配的原则,适当提升嵌入技术的使用比例,充分且到位地运用图文关联技术,开展图文关联技术组合效果的研究,加强不同学科教材编写者在插图编配上的相互借鉴。

县级融媒体中心深度发展的几个关键问题

县级融媒体中心是地方党委政府“治县理政”的抓手与平台,作为一种战略安排,融媒体中心有其技术、经济、政治与文化时代背景,数字信息技术不断革新下的挑战与机遇,使得县级传统媒体必然转型为融媒体中心,因而其生产者构成、职能部门构成、渠道构成、产品构成、受众构成、社会构成等必然有新的规律和特点,但本质上依然是一种新闻机构。这就要求我们从宏观、中观、微观等层面来把握这种战略安排,对融媒体中心深度发展的逻辑遵循、核心构成、地方价值、舆论引导和文化建设的理解,就成为管理者、研究者和从业者所有工作的重中之重。

广东音乐钢琴改编曲的艺术特色与演奏要义

中国钢琴作品的创作与发展已有百年历史,而广东音乐钢琴改编曲以广东音乐元素为基础,结合并借鉴西方钢琴创作技法,以其浓郁的岭南风韵,确立了在中国钢琴音乐中的重要地位。广东音乐钢琴改编曲在乐曲的风格、曲式、调性等方面独具一格,演奏起来也有别于其他国家和地区的钢琴改编曲。立足广东音乐钢琴改编曲的艺术特色与演奏要义,探索如何合理运用钢琴这一西洋乐器,展现广东音乐独特的神韵与意境。通过深入分析改编曲的创作背景、音乐风格和演奏技巧,提出有效的途径建议,以助于演奏者更好地理解和诠释优秀的广东音乐钢琴改编曲。

集中式馈线自动化配电网供电可靠性评估

计及集中式馈线自动化的配电网可靠性评估尚存在较多研究空白,且多数研究仅计及故障停电的影响,在考虑预安排检修容量约束的情况下,计及负荷转供影响,结合馈线自动化的类型及运行逻辑,依据馈线自动化相关技术指标,对恢复供电过程中出现的负荷点进行详细分类,推导出不同类型负荷期望恢复供电时间和配电网供电可靠性指标计算公式。结合算例进行分析可知,不同终端配置下馈线系统平均停电持续时间SAIDI可减少0.95~1.08 h/(用户·a),说明了优化终端配置可有效提高配电网供电可靠性,证明了所提评估方法的准确性和实用性,并比较了不同终端配置对可靠性的影响。

高温掘进巷道中双压风筒布设位置及降温效果研究

为解决高温掘进巷道中冷却方法和冷却成本问题,量化分析双压风筒布置方式对巷道中人工作业区的通风降温效果,利用Fluent软件对不同通风布置模型进行数值模拟。首先,提出双压风筒通风降温思路,并分别建立3种风筒布置巷道的三维几何模型;其次,在送风速度v=8 m/s,送风温度T=293.15 K且相同环境模拟参数的条件下,对不同布置方式的降温效果进行对比研究;最后,分析得出布置2模型的温度场分布及降温效果最好,并总结其在不同送风温度时的降温规律,确定经济适用的通风降温方案。研究表明:风筒布设位置是决定巷道温度分布的关键因素,双压风筒的间距影响风流流向的对称性,而风筒位置高度影响温度均匀分布的距离;当送风速度v=8 m/s时,布置2通风降温效果明显且满足矿井通风需求标准,送风温度T=298.15 K时能为矿山生产最大限度节约经济成本。

服装裁片自动抓取技术及其布局方法的研究进展

为促进服装裁片自动化运输的发展,推动服装加工端完成产业升级,即“机器代人”,实现服装智能制造,综述了目前国内外服装裁片智能抓取技术及其布局方法的研究现状。具体分析了空压吸附式抓取,静电式抓取,针刺式抓取,机械手抓取和软体手指抓取的原理和特点,阐述了各抓取方式所适用的面料范围,将其在面料表面的布局方式总结为3类:盲式布局抓取、单点布局抓取和多点协同抓取。研究认为软体手指抓取技术具有更广阔的应用前景,并展望了服装裁片智能抓取技术的未来发展趋势,指出提高抓取准确率,提高抓取头的重复定位精度,研发便捷、高效、经济的布局方式,以及研发结合机器视觉技术等人工智能技术的智能抓取方式为未来的重要研究方向。

政企联动情境下中小企业的资源编排与二次创业机理研究——以江西南康家具为例

以江西南康家具为案例背景,揭示政企联动开展资源编排活动,助力中小企业构建创业生态系统的内在机理及实现路径。研究发现:(1)中小企业二次创业实践包括“资源整合(结构化)—资源桥接(能力化)—资源重构(杠杆化)”的资源编排过程,并通过蓄势储能、平台赋能与竞合释能实现创业跃迁;(2)中小企业二次创业经历了认知觉醒、组织进化和价值释放的序贯过程,且不同阶段的关键行为主体角色呈现“政府主导、在位企业响应→政府引导、核心企业牵引→政府规制、产业生态耦合”的动态演化特征;(3)中小企业藉由二次创业突破既有资源能力瓶颈,以创业意愿激活、价值链攀升、生态圈融合为路径塑造创业生态系统。

长周期波作用下平板阵列防波堤消浪特性数值模拟研究

如何有效地抵御长周期波浪是目前海岸工程所需解决的难题。板式防波堤对长周期波浪具有一定的消浪效果,且施工方便、造价低廉、适用范围广,对其进一步的研究具有重要意义。本文基于数值模拟软件FLOW-3D,建立数值造波水槽,以防波堤相对板长L_(0)/L、相对板间距j/L、相对板厚d/H及板数N为研究参数,给出平板阵列防波堤最佳布置方案及尺寸。模拟结果表明:结构参数相对板厚d/H=0.1,板数N=4,相对板间距j_(1)/L=0.3,j_(2)/L=0.1,相对板长L_(0)/L=0.6,非均匀布置四板型式平板阵列防波堤的消浪效果最好,说明该布置形式对周期小于8 s(原型周期T=25.28 s)的长周期波有良好的消浪效果。

阵列式碳纤维复合材料的制备与微波吸收机理研究

以碳纤维为代表的碳材料具有质轻、导电性好、化学稳定性强等突出的物理化学性质,将其作为吸波剂使用可以提升材料的吸波性能、使用寿命并有效降低重量。通过“电场取向优化+基体灌封固化”的工艺完成了不同组分阵列式碳纤维复合材料的制备,采用SEM、FT-IR等手段对材料的形貌和化学成分进行表征,利用矢量网络分析仪对材料在2~18 GHz频段内的复介电常数和复磁导率进行表征,分析了微观结构对材料电磁参数、界面阻抗匹配及电磁波吸收性能的影响规律,最后研究碳纤维空间排布形式、复配粉体成分对其吸波性能的影响机制。结果表明,材料的电磁损耗机制由电介质损耗、干涉相消、界面极化弛豫、磁损耗共同构成;当复合材料厚度为2.0 mm时,反射率<-10 dB(6.1~7.6 GHz),在6.5 GHz处最大衰减值为-15.2 dB,热导率达到3.2 W/(m·K);验证所制备的材料在满足电磁波吸收功能的同时还具有一定的导热性。

资源编排视角下江苏“好苏嫂”发展策略研究

家政服务已经成为城市生活不可或缺的重要组成部分。本文以江苏省好苏嫂家庭服务有限责任公司为例,运用资源编排理论总结“好苏嫂”在资源管理中的成功经验,为中国家政企业的发展策略提供参考借鉴。