Multiscale Study on Low Temperature Crack Resistance Mechanism of Steel Slag Asphalt Mixture

The objective of this paper was to study low temperature crack resistance mechanism of steel slag asphalt mixture(SAM).Thermal stress restrained specimen test(TSRST)and three-point bending test were carried out to evaluate the low-temperature crack resistance of SAM and basalt asphalt mixture(BAM).Based on the digital image correlation technique(DIC),the strain field distribution and crack propagation of SAM were analyzed from the microscopic point of view,and a new index,crack length factor(C),was proposed to evaluate the crack resistance of the asphalt mixture.The crystal phase composition and microstructure of steel slag aggregate(SA)and basalt aggregate(BA)were studied by X-ray diffraction(XRD)and scanning electron microscopy(SEM)to explore the low-temperature crack resistance mechanism of SAM.Results show that the low-temperature crack resistance of SAM is better than that of BAM;SAM has good integrity and persistent elastic deformation,and its bending failure mode is a hysteretic quasi-brittle failure;The SA surface is evenly distributed with pores and has surface roughness.SA has the composition phase of alkaline aggregate-calcite(CaCO3),so it has good adhesion to asphalt,which reveals the mechanism of excellent low-temperature crack resistance of SAM.

Long-term performance of recycled asphalt mixtures containing high RAP and RAS

The application of reclaimed asphalt pavement(RAP)and reclaimed asphalt shingles(RAS)on asphalt pavement can reduce the asphalt paving cost,conserve energy and protect the environment.However,the use of high contents of RAP and RAS in asphalt pavement may lead to durability issues,especially the fatigue cracking and thermal cracking.It is necessary to conduct a series of analyses on asphalt mixtures containing high RAP and RAS,and seek methods to enhance their long-term performance.This paper provides a comprehensive over-view of the long-term performance of recycled asphalt mixtures containing high contents of RAP and RAS.The findings in this research show that rutting resistance of high recycled asphalt mixtures is not a concern,whereas their resistance to fatigue and thermal cracking is not conclusive.Recycling agents can be used to improve the thermal cracking resistance of high recycled asphalt mixtures.An optimum decision on recycling agents will improve the durability properties of high recycled asphalt mixtures.It is recommended that to use a balanced mixture design approach with testing of the blended asphalt binders will provide better understanding of long-term performance of recycled asphalt mixtures containing high RAP and RAS.

Normalized fatigue properties of asphalt mixture at various temperatures

This study normalized the mixture's fatigue behavior at various temperatures,and the strength and fatigue tests of the mixture were conducted.The stress state of the asphalt mixture includes direct tensile,uniaxial compression,and indirect tensile.The Desai yield surface and fatigue path were proposed.And a normalized fatigue characteristics model of the mixture was established.The following conclusions were obtained.With the increases in the loading rate,the strength of the asphalt mixture increased.As the temperature increases,the strength of the mixture is reduced.At various temperatures and rates,the strength forms a closed curved surface.The Desai strength yield surface was established,which forms a closed curved surface.When the loading rate and temperature are below a certain critical line,the asphalt mixture will not undergo strength damage.At a fixed stress state,the fatigue damage path of the mixture was determined.The stress ratio was determined considering the influence of the loading rate.In this way,a normalized model can be described to express the asphalt mixture fatigue properties at various temperatures and stress levels.For the asphalt mixture in an indirect tensile state,the normalized fatigue equation parameter is 4.09.This model is more suitable for reflecting the viscous-elastic behavior of the mixtures than the fatigue equation determined by the notional stress ratio.

A review on evaluation of crack resistance of asphalt mixture by semi-circular bending test

Although there are many kinds of fracture tests to choose from in evaluating the crack resistance of asphalt mixture,the semi-circular bending(SCB)test has attracted a lot of attention in the academic road engineering community because of its simplicity,stability,and flexibility in testing and evaluation.The SCB test has become a common method to study the cracking resistance of asphalt mixture in recent years.This paper mainly summarizes the overview of the SCB test,summarizes some research results and common characterization parameters of the SCB test method in monotone test and fatigue test in recent years,and predicts and suggests the research direction of the SCB test in the future.It is found that the research on the monotonic SCB test is more comprehensive,and the research on the SCB fatigue test needs to be further improved in the aspects of loading mode,characterization parameter selection,and so on.Researchers can flexibly adjust the geometric dimensions and the test parameters of semi-cylindrical specimens,and conduct comprehensive analysis combined with the results of numerical simulation.The crack resistance of asphalt mixture can be comprehensively evaluated by fracture energy,fracture toughness,stiffness,flexibility index and other fracture indicators,combined with the crack propagation of the specimen.The analysis of numerical simulation can confirm the test results.In order to standardize the setting of fatigue parameters for future application,it is necessary to standardize the setting of bending performance.

Bamboo Fiber Modified Asphalt Mixture Proportion Design and Road Performances Based on Response Surface Method

In order to comprehensively utilize the remaining bamboo residue of bamboo products,this paper presents a research on recycling the bamboo fibers from bamboo residue for improving the performance of the asphalt mixtures.First of all,the basic performance parameters of sinocalamus affinis fiber,phyllostachys pubescens fiber,green bamboo fiber were tested and analyzed,and the optimal content and length were put forward.Then,the mix ratio design of the bamboo fiber modified asphalt mixture was further designed through the response surface method,and was verified the rationality of the mix ratio.Finally,the mixture specimens were made according to the experimental design mix ratio,and the high temperature,low temperature performance and moisture susceptibility of the bamboo fiber modified mixtures asphalt were tested.The results showed that the high temperature performance,low temperature performance and moisture susceptibility of bamboo fiber modified asphalt mixtures were improved compared with the performance of SBS modified asphalt mixture.When the length of bamboo fiber is 7.25 mm and the content of 0.22%,the road performance of the asphalt mixture was optimal.Consequentially,the decomposition of bamboo residue into bamboo fiber and its application in asphalt pavement can improve the reuse of bamboo waste,with remarkable environmental benefits and great promotion value.

Influence of Hydrodynamic Pore Pressure Damage on the Performance of Hot-Mixed Renewable Asphalt Mixture

For evaluating the water stability of hot-mixed renewable asphalt mixture(HRM),the traditional methods are all tested under still water conditions.Except for damage in still water conditions,the hydrodynamic pore pressure generated by the tire driving on the surface water has a great impact.Thus,the RAP contents of the HRMs were designed at 0%,30%,45%and 60%with AC-25 gradation.Then,the self-designed evaluation methods of water stability and dynamic modulus were studied.Finally,the mechanism of the influence of hydrodynamic pore pressure damage on HRMs was studied.The results show that the water stability of HRM containing 30%RAP is equivalent to that of 45%RAP,and the water stability of HRM containing 60%RAP decreases significantly.The Contabro test after MIST treatment can be used as an evaluation method for hydrodynamic pore pressure damage on HRM.Low-speed,heavy-load traffic and larger RAP content have greater damage to the mixture after hydrodynamic pore pressure damage.The performance differences between the aged bitumen and pure bitumen,as well as the aged minerals and new minerals,are continuing to be enlarged in hydrodynamic pore pressure conditions,finally affecting the water stability and dynamic modulus of the HRMs.

Fatigue Property of Basalt Fiber-Modified Asphalt Mixture under Complicated Environment

The fatigue property of asphalt mixtures under complicated environment （low-temperature bending performance, chloride penetration, freezing-thawing cycle and their coupling effect） and the improvement effect for relevant property of basalt fiber-reinforcing asphalt mixture under complicated environment are studied. Two grading types of asphalt mixtures, AC-16I and AC-13I, are chosen, whose optimum asphalt-aggregate ratio and optimum dosage of basalt fiber are determined by the Marshall test. The standard specimens are made firstly, and then the low temperature bending tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under the coupling effect of the chloride erosion and freezing-thawing cycle have been carried out. Finally, the fatigue property tests of asphalt mixture and basalt fiber-reinforced asphalt mixture under complex environment are performed on MTS material testing system. The results indicate that the tensile strength, the maximum curving tensile stress, the curving stiffness modulus, and fatigue properties of asphalt mixture are influenced by the coupling effect of the chloride erosion and freezing-thawing cycle. The low-temperature bending performance and fatigue property of asphalt mixtures under complicated environment can be greatly improved by adding moderate basalt fiber. The dense gradation asphalt mixture possesses stronger ability to resist adverse environmental effects under the same condition.

Effects of Fibers on the Dynamic Properties of Asphalt Mixtures

The dynamic characteristics of fiber-modified asphalt mixture were investigated. Cellulose fiber, polyester fiber and mineral fiber were used as additives for asphalt mixture, and the dosage was 0.3%, 0.3%, 0.4%, respectively. Dynamic modulus test using SuperPave simple performance tester （SPT） was conducted to study the dynamic modulus （E＇） and phase angle （δ） for the control asphalt mixture and fiber-modified ones at various temperatures and frequencies. Experimental results show that all fiber-modified asphalt mixtures have higher dynamic modulus compared with control mixture. The dynamic modulus master curves of each type of asphalt mixtures are determined based on nonlinear least square regression in accordance with the time- temperature superposition theory at a control temperature （21.1℃）. The fatigue parameter E^＊×sinδ and rutting parameter E^＊/sinδ of asphalt mixture are adopted to study the fatigue and rutting-resistance properties, and experimental results indicate that such properties can be improved by fiber additives.

Effects of Aggregate Size and Specimen Scale on Asphalt Mixture Cracking Using a Micromechanical Simulation Approach

A micromechanical model based on discrete element method（DEM） was employed to investigate the effects of aggregate size and specimen scale on the cracking behavior of asphalt mixture. An algorithm for generating three-dimensional aggregates that can reflect the realistic geometry such as shape, size and fracture surface of aggregate particles was developed using a user-defined procedure coded with FISH language in particle flow code in three-dimensions（PFC3 D）. The parallel-bond model（PBM）, linear contact model（LCM）, and slip model（SM）, whose sets of micro parameters were obtained by comparing experimental tests with numerical simulation results, were used to characterize the internal contact behavior of asphalt mixture. Digital asphalt mixture specimens were used to simulate the effects of aggregate size and specimen scale on the cracking behavior by the indirect tensile（IDT） test. Some conclusions can be drawn as follows： Both cracks and IDT strength decrease with increasing aggregate size. However, the heterogeneity of contact-force distribution augments with increasing aggregate size, especially with 13.2-16 mm aggregate. The aggregate size of 4.75-9.5 mm dominates in forming skeleton structure for asphalt mixture. The IDT strength decreases and cracks augment with increasing sample scale. The crack growth can be well interpreted from the perspective of energy analysis. The conclusions show that the proposed micromechanical model is suitable for the simulation of crack propagation. This study provides an assistant tool to further study the cracking behavior of particle-reinforced composites material such as asphalt mixture and Portland cement concrete.

Design Method and Performance for Large Stone Porous Asphalt Mixtures

Design method for large stone porous asphalt mixtures （LSPM） was analyzed to avoid the early distresses of semi-rigid asphalt pavements. Based on stone-to-stone skeleton structure concept, processes of LSPM gradation design was given. The gradation composite design for LSPM shows that the LSPM nominal maximum size （ N MS） should be larger than 26.5 mm, and the NMS sieve passing percentage should be greater than 50%. Through experiments and calculations on the volume properties of the aggregate, the range of aggregate gradation curve of LSPM was given. In terms of asphalt binder＇s normalized test results, MAC-70 and SBS modified asphalt were selected as the asphalt binders. The applicability of large scale Marshall Method and gyratory compaction method to shape specimens was investigated. Based on the asphalt mixture performance evaluation, the optimum asphalt content range （3.1%-3.6%）, the bitumen film＇s thickness range （13-16 μm） and the air void range （13%-18 %） were recommended. Finally, LSPM was tested by the laboratory performance tests including rutting resistance test, fatigue test and water stability test. The theoretic and practical analysis shows that LSPM has a good performance on water permeability, rutting resistance and reflection crack resistance.

Effects of Temperature on the Dynamic Properties of Asphalt Mixtures

By using the falling weight deflectometer（FWD）,the dynamic loading tests on different thickness of asphalt mixture pavement in different temperature were performed.The experimental results show that the effects of temperature on dynamic properties of asphalt mixture are significant,and the thickness of asphalt mixture is also another important influence factor.The comparisons indicate that effect of temperature on the behaviors of dynamic loading properties and static loading properties of asphalt mixture were quite different.

Effect of Loading Condition and Temperature on Dynamic Properties of Asphalt Mixtures

In order to study the effects of loading condition and temperature on the dynamic properties of asphalt mixtures, the dynamic loading tests on different loading condition （various speeds and loads under a certain roughness） and temperature conditions were performed. The experimental result show that the dynamic properties of asphalt mixtures are influenced by vehicle load and speed, besides, the effects of temperature on dynamic properties of asphalt mixture are significant.

A Mechanical Model for Three-phase Permanent Deformation of Asphalt Mixture under Repeated Load

On basis of the Burgers model, a new model consisting of modified dashpot and Van Der Poel model was derived from rheological and viscoelastic theory. Subsequently, triaxial repeated load permanent deformation tests of AC16 asphalt mixtures were conducted to validate this new developed model. Parameters of new developed model were obtained by a nonlinear regression analysis of test data, and then permanent strains and flow number of each mixture were calculated. The experimental results prove that the new developed model can well describe three phases permanent deformation of asphalt mixture under repeated load and it can be used for pavement mechanical analysis and rutting prediction.

Parameter Characterisation of Asphalt Mixtures for Visco-Elastoplastic Analysis

Asphalt mixtures exhibit strong viscous properties under repetitive loads. This phenomenon can be simulated in creep and recovery tests. By applying the visco elastoplastic model proposed, data recorded in the tests are interpreted. It is emphasised that applicability of the visco elastoplastic model depends on the proper method of characterising parameters involved in the constitutive equations. Since two or more strain components of elasticity and viscosity coexist during the loading or unloading, a measuring system of two loggers is introduced to decouple these components. Test data are analysed in three steps as elastic, visco elastic and visco plastic evaluations, using the records collected at the moment of unloading, during the periods of recovery and creep respectively. Factors that may influence the accuracy of data analysis are also discussed.

Design of Small Stone Asphalt Mixture based on Anti-skidding Performance

Small stone asphalt mixture（SSAM） was designed by Bailey method and coarse aggregate voids-filling method.The optimum asphalt content was determined by Marshal test.Surface texture depth for SSAM with different voidage,and the BPN of SSAM and SMA before after wet track abrasion were measured.The experimental results indicate that the surface texture depth increases with the decreasing of asphalt aggregate ratio.The SSAM with the optimal asphalt content has a good skid resistance.BPN of asphalt mixture decreases with the increasing of wearing time,but the extent of reduction is different.The reduction rate of BPN for SSAM is smaller than that of SMA,indicating that SSAM has a good skid resistance attenuation capacity.Finally,the other properties of SSAM are also evaluated,showing that the splitting strength and modulus and SSAM are higher than those of SMA,and the other properties of SSAM,such as high-temperature performance and water stability can also satisfy the technical requirements.

High-Temperature Deformation and Low-Temperature Fracture Behavior of Steel Slag Rubber Asphalt Mixture Surface Layer

Steel slag is regarded as one of the most widespread solid by-products of steel smelting with little commercial value.It can play a vital role in the construction industry especially in the field of transportation infrastructure construction.However,there are few evaluation systems established on the high-temperature deformation and low-temperature fracture behavior of steel slag rubber asphalt mixture(SSRAM).This study explores the perfor-mance of SSRAM by uniaxial penetration test,Semi-Circular Bending(SCB)test and evaluates test data through regression analysis.The uniaxial penetration test results shows that the failure deformation of SSRAM increases with the increase of steel slag content.According to the minimum allowable permanent deformation(R TS-min),the deformation of SSRAM should be controlled within 3 mm.Meanwhile,the cracking index of the SSRAM surface layer calculated at low temperature can meet the design requirements.The SCB test results show that the stress peak degradation rate(specimens with 10 mm notch are compared with 0 mm)of SSRAM with 40%steel slag content is 20.04%.That means proper steel slag content makes the stress peak degradation rate of SSRAM reaches the lowest value.The calculation results of fracture energy density(J_(1C))show that the steel slag additive reduced the fracture energy density of SSRAM.However,it is still proved that SSRAM with 40%steel slag has the best low-temperature fracture performance based on critical fracture toughness(K_(1C))and fracture stress peak.Further-more,the crack propagation velocity parametric equation of SSRAM is proposed through fracture mechanics theory and the increase of velocity is exponential.Considering the high-temperature deformation resistance and low-temperature fracture property,the SSRAM surface layer with 40%steel slag content showed a batter application potential.

High-temperature Creep Behavior Characterization of Asphalt Mixture based on Micromechanical Modeling and Virtual Test

The high-temperature creep behavior of asphalt mixture was investigated based on micromechanical modeling and virtual test by using three-dimensional discrete element method（DEM）. A user-defined micromechanical model of asphalt mixture was established after analyzing the irregular shape and gradation of coarse aggregates, the viscoelastic property of asphalt mastic, and the random distribution of air voids within the asphalt mixture. Virtual uniaxial static creep test at 60 ℃ was conducted by using Particle Flow Code in three dimensions（PFC3D） and was validated by laboratory test. Based on virtual creep test, the micromechanical characteristics between aggregates, within asphalt mastic, and between aggregate and asphalt mastic were analyzed for the asphalt mixture. It is proved that the virtual test based on the micromechanical model can efficiently predict the creep deformation of asphalt mixture. And the high-temperature behavior of asphalt mixture was characterized from micromechanical perspective.

Investigation of Micro-mechanical Response of Asphalt Mixtures by a Three-dimensional Discrete Element Model

The micro-mechanical response of asphalt mixtures was studied using the discrete element method. The discrete element sample of stone mastic asphalt was generated first and the vehicle load was applied to the sample. A user-written program was coded with the FISH language in PFC3 D to extract the contact forces within the sample and the displacements of the particles. Then, the contact forces within the whole sample, in asphalt mastic, in coarse aggregates and between asphalt mastic and coarse aggregates were investigated. Finally, the movement of the particles in the sample was analyzed. The sample was divided into 15 areas and a figure was drawn to show how the balls move in each area according to the displacements of the balls in each area. The displacements of asphalt mastic balls and coarse aggregates were also analyzed. The experimental results explain how the asphalt mixture bears vehicle load and the potential reasons why the rutting forms from a micro-mechanical view.

Fatigue test setups and analysis methods for asphalt mixture: A state-of-the-art review

Fatigue performance evaluation on asphalt mixture provides an essential reference for asphalt mixture design and pavement structure design.Laboratory fatigue test has been widely used by researchers and engineers to assess the fatigue performance of asphalt mixture,due to its low cost,high efficiency,and strong operability.To ensure performance assessment reliability,fatigue test operated in the laboratory needs to simulate the loading and environmental conditions occurring in the field asphalt layer.As a result,loading setups in laboratory fatigue tests,including loading mode,loading frequency,loading waveform,temperature,and the controlled mode,have been carefully devised by researchers.This paper reviews the above common setups in fatigue tests,which aims to illustrate the classical and latest considerations as well as ideas proposed by researchers for improving fatigue test procedures.As fatigue response data of asphalt mixture is measured from fatigue test,an analysis method is required to process the data and identify fatigue behaviors of the material.Presently,the frequently-used fatigue data analysis methods include the fatigue life model,stiffness-modulus-based method,energy-based method,and viscoelastic continuum damage(VECD)method.This paper also provides a review survey on the main concepts,indicators,and models included in those methods to facilitate their applications.Meanwhile,the latest research progress and outputs related to the four methods are also introduced and discussed to reveal the state-of-the-art developments in this research area.

Asbestos Tailings as Aggregates for Asphalt Mixture

To use many asbestos tailings collected in Ya-Lu highway,and to explore the feasibility of using asbestos tailings as aggregates in common asphalt mixtures,and properties of some asphalt mixtures were evaluated as well.X-ray diffraction （XRD）,X-ray fluorescent （XRF）,and atomic absorption spectrophotometry （AAS） were employed to determine the solid waste content of copper,zinc,lead,and cadmium.Volume properties and pavement performances of AC-25 asphalt mixture with asbestos tailings were also evaluated compared with those with basalt as aggregates.XRD and XRF measurement results infer that asbestos tailing is an excellent road material.Volume properties of AC-25 asphalt mixture with asbestos tailings satisfied the related specifications.No heavy metals and toxic pollution were detected in AAS test and the value of pH test is 8.23,which is help to the adhesion with asphalt in the asphalt concrete.When compared with basalt,high temperature property and the resistance to low temperature cracking of AC-25 asphalt mixture was improved by using asbestos tailings as aggregates.In-service AC-25 asphalt pavement with asbestos tailings also presented excellent performance and British Pendulum Number （BPN） coefficient of surface.