The asphalt pavement longitudinal crack is a common distress in cold regions,resulting from uneven deformation of the subgrade.Analysis of the correlation law between uneven deformation and crack distress is of positi...The asphalt pavement longitudinal crack is a common distress in cold regions,resulting from uneven deformation of the subgrade.Analysis of the correlation law between uneven deformation and crack distress is of positive significance for understanding the mechanism of crack initiation,and putting forward treatment measures.In view of the complexity of longitudinal crack inducement and road surface deformation,the grey relational method was used to analyze this relationship.Through long-term monitoring of the vertical deformation data of typical road sections,the vertical deformation law of the pavement surface and its deformation characteristics under the action of temperature field are analyzed.Parameters such as vertical relative deformation,vertical relative deformation rate and vertical differential deformation VDSr were constructed to describe vertical deformation characteristics.Typical distribution characteristics of longitudinal fractures and their length and distribution characteristics are also described.The grey correlation analysis theory was utilized to analyze the relationship between deformation characteristics of sections,cross sections and monitoring points and longitudinal crack characteristics(length and location).The analysis reveals a linear positive correlation or a high correlation between several indicators.This study can provide a deeper understanding of the occurrence and development mechanism of longitudinal cracks in asphalt pavement of cold areas,and give references for the research of road engineering structure,materials and distress prevention.展开更多
A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence....A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence.Furthermore,in order to improve the calculation accuracy a swarm intelligence optimization algorithm is also exploited to inversely analyze the laws by which the thermal physical parameters of the asphalt pavement materials change with temperature.Using the basic cuckoo and the gray wolf algorithms,an adaptive hybrid optimization algorithm is obtained and used to determine the relationship between the thermal diffusivity of two types of asphalt pavement materials and the temperature.As shown by the results,the prediction accuracy achievable with this approach is higher than that of the linear model.展开更多
The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduce...The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduced for evaluating the structural response of asphalt pavement.The pavement structure,the material characterization with temperature,the interlayer contact bonding model,the types of bond failure,and the prediction method of pavement life are described in detail.Results show that the transversely tensile strains at the top of asphalt pavement under the condition of high temperature were easy to cause the top-down cracking outside the edge of the dual tire.The bonding failure has a significant influence on strains at the bottom of the surface course with the condition of high temperature,especially,the longitudinally tensile strains would increase obviously as the disengaging area between the surface course of asphalt pavement and the base layer increases.Finally,it is proved that the surface course is vulnerable to form deformations and cause damage under the combined action of low speed and high temperature.展开更多
The acceleration of urbanization has promoted the increase in the number of urban highway projects,resulting in an increase of emphasis on the quality of urban highway projects.The quality and safety of highway constr...The acceleration of urbanization has promoted the increase in the number of urban highway projects,resulting in an increase of emphasis on the quality of urban highway projects.The quality and safety of highway construction directly affects the driving comfort,safety,and service life after it is put into operation.Among them,asphalt pavement is an important structure in highway construction,and it is also a key link that directly affects the construction quality.In order to ensure the quality of construction,it is necessary to strengthen on-site testing during the construction process to discover problems in time,and to ensure that the construction is up to standard.This paper mainly presents an analysis on the necessity and application of on-site quality inspection technology for asphalt pavement construction of highway engineering,and outlines measures to improve highway engineering construction testing technology.展开更多
The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an i...The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an important impact on the overall quality of highway construction.Therefore,it is necessary to conduct scientific and reasonable tests and detections for highway asphalt pavement.This paper presents a discussion on the test and detection technology of highway asphalt pavement for future reference.展开更多
Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pave...Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.展开更多
This work presented the development and validation of an analytical method to predict the transient temperature field in the asphalt pavement.The governing equation for heat transfer was based on heat conduction radia...This work presented the development and validation of an analytical method to predict the transient temperature field in the asphalt pavement.The governing equation for heat transfer was based on heat conduction radiation and convection.An innovative time-dependent function was proposed to predict the pavement surface temperature with solar radiation and air temperature using dimensional analysis in order to simplify the complex heat exchange on the pavement surface.The parameters for the time-dependent pavement surface temperature function were obtained through the regression analysis of field measurement data.Assuming that the initial pavement temperature distribution was linear and the influence of the base course materials on the temperature of the upper asphalt layers was negligible,a close-form analytical solution of the temperature in asphalt layers was derived using Green's function.Finally,two numerical examples were presented to validate the model solutions with field temperature measurements.Analysis results show that the solution accuracy is in agreement with field data and the relative errors at a shallower depth are greater than those at a deeper one.Although the model is not sensitive to dramatic changes in climatic factors near the pavement surface,it is applicable for predicting pavement temperature field in cloudless days.展开更多
The binder properties were determined in accordance with Chinese standard such as ductility test, which allowed to measure the distance in centimeters that a standard briquette of asphalt had been stretched before bre...The binder properties were determined in accordance with Chinese standard such as ductility test, which allowed to measure the distance in centimeters that a standard briquette of asphalt had been stretched before breaking. Then, penetration test was carried out in order to know some properties of the asphalt, which are the hardness and the softness. Finally, softening point test was carried out in order to determine the temperature at which the bitumen attains a particular degree of softening under the specification of the test. According to Chinese standard for performance tests, firstly, Marshall test was carried out in order to measure the theoretical density, air voids, voids filled with asphalt, stability, flow, and voids in mineral aggregate of asphalt specimens. Secondly, Freeze-thaw splitting test was carried out in order to determine Splitting strength ratio. Finally, dynamic stability (rutting) test was carried out to determine average dynamic stability. Beside the tests carried out, the gradation of the extracted aggregate in accordance with American Association of State Highway and Transportation Officials was carried out to determine the dimensions of the particles weight distribution. Furthermore, both the percentage of recycled asphalt pavement materials and binder in mixture were determined to know how much of the new material during the mixture was needed. However, two specimens were used to evaluate the performance of recycled asphalt pavement materials. One specimen of recycled asphalt pavement materials was ten years old, and another one of recycled asphalt pavement materials was five years old. The results show that the conditions of the environment such as moisture, temperature, and age, decrease the ductility and penetration properties of binder when increase the softening point property of binder. Then the gradation of recycled asphalt pavement aggregate is of the required values to reuse in the mixture, while the flow ratio, the splitting strength ratio, and the dynamic stability ratio, are less than the required value test. With regard to the properties of mixture of recycled asphalt pavement material binder with rejuvenator, the results show that when the penetration and ductility versus percentage of rejuvenator increase, softening point versus percentage of rejuvenator decreases. Also, when the bitumen and rejuvenator percentage increase, the air voids decrease. Consequently, voids filled with asphalt and voids in the mineral aggregate increase. Moreover, the theoretical density and stability values decrease in a mixture containing four-point fifty percent to six percent of bitumen and rejuvenator, whereas the flow values increase. More interestingly, with four percent to four-point fifty percent mixture ratio of bitumen and rejuvenator, density, stability, and flow values increase. The splitting strength ratio values of mixtures and the dynamic stability test (rutting test) values of mixtures with forty percent of specimen one and specimen two respectively are greater than the required value of the standard test. In addition, the high percentage of rejuvenator increases the rut of pavement, in the same manner, the low percentage of rejuvenator induces low rut. In conclusion, the binder content from recycled materials without rejuvenator seems not be sufficient to be reused on the new pavement while the aged recycled material seems to be performed better than no aged recycled material with rejuvenator into bitumen. Then, the rejuvenator can influence the bitumen properties and performance of the pavement. Finally, the pavement made by only recycled pavement materials as a base layer appears to be more economical but cannot be more effective than the pavement made by mixture of new and recycled pavement materials as a base layer.展开更多
Nowadays asphalt pavement structure bearing is not the main subject for pursuers to study.Comparatively,the pavement performance is more important and emphasized.Based on this,rutting and cracking analysis is introduc...Nowadays asphalt pavement structure bearing is not the main subject for pursuers to study.Comparatively,the pavement performance is more important and emphasized.Based on this,rutting and cracking analysis is introduced into pavement optimization.A optimization model based on these two considerations is also established.The genetic algorithms (GAs) is adopted to solve the model.It is an intellective method.This research provides a new idea and technique for asphalt pavement structure optimization.展开更多
The property of reclaimed asphalt pavement(RAP) mixture will be affected mainly by composition of old asphalt/soil and cement content in CIR system. We studied the relationship between A/S and cementitious materials...The property of reclaimed asphalt pavement(RAP) mixture will be affected mainly by composition of old asphalt/soil and cement content in CIR system. We studied the relationship between A/S and cementitious materials. It showed that if there was no soil in RAP, the unconfined compressive strength was only from 0.18 MPa to 1.07 MPa even if adding cement was from 2% to 6%, and RAP samples collapsed during conserving in water. The optimum water content rose from 6.5% to 11% with the declining of A/S from S=0 to A/S=1/5. Five RAP samples all got the maximum compressive strength when A/S=5/5, and the maximum compressive strength of the samples adding 6% cement was 3.17 MPa. It showed that the capacity of RAP was not only affected by A/S, but also by the content of cement. The dynamic modulus of RAP will increase with the rise of loading frequency and decrease with the temperature rising. SEM test showed that C-S-H interlacing formed the netted structure, and it enwrapped the aggregate and improved the strength of RAP.展开更多
This paper presents the way to harvest mechanical energy from asphalt pavement by piezoelectric generator. Results show that the potential energy in asphalt pavement can be up to 150 kW/h per lane per kilometre. Part ...This paper presents the way to harvest mechanical energy from asphalt pavement by piezoelectric generator. Results show that the potential energy in asphalt pavement can be up to 150 kW/h per lane per kilometre. Part of the mechanical energy can be harvested by piezoelectric transducers. The performance of seven typical transducers is examined through finite element analysis. Results show that PZT piles and multilayer, cymbal and bridge can work in asphalt pavement environment. PZT piles and multilayer have higher energy converting rate, However, the total harvested energy is small if these transducers are embedded directly in pavement. A prototype pavement generator is developed using PZT piles to increase the harvested energy. The generator can harvest more than 50 kW/h energy from the pavement under heavy traffic. 8-16 PZT piles are recommended for one generator. Round shape is suggested for the PZT piles to reduce the concentration of stress. And multilayer structure is recommended for PZT piles to decrease the electric potential of generator. The generator can be extended as sensor in the asphalt pavement, which can be used to monitor the traffic, pavement stress and temperature.展开更多
To understand the research status of asphalt pavement texture,the related achievements and progress of pavement surface texture were systematically sorted out from three aspects:the characterization of pavement surfac...To understand the research status of asphalt pavement texture,the related achievements and progress of pavement surface texture were systematically sorted out from three aspects:the characterization of pavement surface texture,the texture measurement and evaluation,and the relationship between texture and the skid resistance.Based on the statistical geometric characteristics,the spectral characteristics,the fractal characteristics and the multifractal characteristics,the characteristics of pavement texture were discussed.The test methods of pavement texture were divided into two categories:direct measurement methods and indirect measurement methods.The advantages and disadvantages of each measurement method were summarized.The effects of macro-texture and micro-texture on asphalt pavement were discussed,respectively.The relationship between texture and skid resistance was studied.This review shows that multifractal theory should be further studied from the aspect of road engineering.High-precision non-contact integrated detection technology should be further studied to meet the needs of complex testing environments.The method of finite element numerical simulation has potential for the analysis of pavement skid resistance.In addition,methods such as big data analysis,neural network,and deep learning should be studied to achieve the intelligent perception and management of the whole state of skid resistance prediction.展开更多
Based on the investigation of long-life asphalt pavement at home and abroad,the development of long-life asphalt pavement technology in Shandong Province,China is reviewed in this paper.The structural combination char...Based on the investigation of long-life asphalt pavement at home and abroad,the development of long-life asphalt pavement technology in Shandong Province,China is reviewed in this paper.The structural combination char-acteristics of typical long-life asphalt pavement in Shandong Province and their popularization and application are introduced.The application effect of combined base long-life asphalt pavement,which has been widely promoted,is evaluated.At the same time,taking the Binda perpetual pavement test road in Shandong Province as an example,the dynamic response and long-term performance evolution of long-life asphalt pavement are analyzed over a period of more than 17 years.Sections S1,S2,and S3 present information about full-depth asphalt pavement.Section S4 describes combined base asphalt pavement.The results show that the maximum strain of S1–S4 is within the endurance strain limit.S1,S2,S3 and S4 are all expected to be long-life asphalt pavements.In the current study,Sections S1–S4 were maintained in good condition during a service period of more than 17 years with no structural cracks and good deflection,rutting,and IRI indexes.The deflection index was stable without growth,and the IRI was also relatively stable following the opening to traffic.The rutting depth un-derwent a slight cumulative increase within 8 years of opening,and then stabilized.The average rutting depth over the 17-year period was less than 15 mm.Therefore,S1–S4 meet the design standards required for use as long-life pavements.From the perspectives of resource saving,energy saving,and emission reduction and service performance,full-depth asphalt pavement can be considered to represent a new generation of green and durable pavement structures with great future promotion potential.展开更多
Reclaimed asphalt pavement(RAP)has significant recycling value because it contains nonrenewable resources including asphalt and aggregate.However,thus far,only a small part of RAP materials can be used in the con-stru...Reclaimed asphalt pavement(RAP)has significant recycling value because it contains nonrenewable resources including asphalt and aggregate.However,thus far,only a small part of RAP materials can be used in the con-struction of recycled asphalt pavement,and the usage is regarded as a low-value utilization in the underlying layers.One of the most important reasons for this shortcoming is the problem of false particle size and pseudo gradation of RAP materials.Therefore,identifying suitable asphalt-aggregate separation technology is essential for improving the utilization of RAP materials in recycled asphalt mixture and enhancing the construction quality of recycled asphalt pavement.To address this,the paper performed a systematic review of asphalt-aggregate separation technologies for processing RAP materials and their prospects.Firstly,based on the composition of the asphalt mixture and the characteristics of RAP materials after aging,the key RAP separation technologies were proposed.Then,the concept,principle,and implementation methods of physical,chemical,and biological sep-aration methods of RAP materials were comprehensively analyzed.Moreover,the advantages and disadvantages of various separation technologies were discussed by comparing them with the related technologies in the petrochemical industry.The application prospects of various asphalt-aggregate separation methods for RAP materials can provide a reference for upgrading and expanding solid waste recycling technology for asphalt pavement.展开更多
To improve the quality of the Hong Kong–Zhuhai–Macao Bridge paving project,a new paving layer material,Guss-mastic asphalt(GMA),was proposed in this paper by combining the advantages of two types of cast asphalt mix...To improve the quality of the Hong Kong–Zhuhai–Macao Bridge paving project,a new paving layer material,Guss-mastic asphalt(GMA),was proposed in this paper by combining the advantages of two types of cast asphalt mixtures:mastic asphalt(MA)and Guss asphalt(GA).Based on the characteristics of GMA,to simulate its actual production process,this study developed a small-simulated cooker mixing equipment.Moreover,the flow degree,60C dynamic stability,and impact toughness were proposed to be used to evaluate the construction and ease,high temperature stability,and fatigue resistance of GMA cast asphalt mixtures,respectively.Moreover,the quality control standards for GMA paving materials by indoor tests,field trial mix GMA material performance tests,and accelerated loading tests were finalized.The study showed that the developed simulated cooker yielded consistent mixing results in the same working environment as the engineering cooker device.Increasing the coarse aggregate incorporation rate,coarsening the mastic epure(ME)gradation composition,and using a smaller oil to stone ratio can reduce the flowability of the GMA materials to varying degrees.The four-point bending fatigue life and impact toughness of the different GMA materials are correlated well.A mobility of<20 s,60C dynamic stability of 400–800 times/mm,15C impact toughness of400 N⋅mm,and cooker car mixing temperature control standard of 210C–230C form an appropriate control index system for the design and production of GMA cast asphalt mixtures.Simultaneously,accelerated loading tests verified the accuracy and reliability of the quality control index system that has been used in the GMA paving project of the Hong Kong–Zhuhai–Macao Bridge deck and has achieved good application results.展开更多
During the production of palm oil,a significant amount of waste is generated.However,because of inefficient handling and utilization,these wastes are becoming a larger issue.As a result,one initiative is to use these ...During the production of palm oil,a significant amount of waste is generated.However,because of inefficient handling and utilization,these wastes are becoming a larger issue.As a result,one initiative is to use these wastes in the pavement industry as sustainable materials.However,there is still a lack of understanding about the wider incorporation of palm oil waste in asphalt pavement and its performance.This study examines existing literature on the use of various wastes in the pavement industry,including palm oil clinker(POC),palm oil fibre(POF),palm kernel shell(PKS),and palm oil fuel ash(POFA).As a result,this paper presents a systematic review and scientometric investigation of related study publications on many uses of palm oil waste in the asphalt pavement industry and its performance from 2009 to 2022.The VOS viewer application was used to conduct the sciento-metric study analysis.The relationship between interactions detected in co-authored country studies cited sources of co-citation,and the keyword of the co-occurrence and publication source enabled the identification of the research gap.According to the systematic literature review,40%–60% POC can be used to fine aggregate for optimal performance,while 0–100%PKS can be used to replace coarse aggregate.In addition,50%–80% POFA or POC fine(POCF)can be used as a filler replacement,5%–8% POCF or POFA as a bitumen modifier,and 0.3% POF as a stabilizing additive.Furthermore,the study demonstrates that the safety of utilizing wastes with more than 50% CO_(2) emissions can be curtailed with minimal heavy metal leaching and radioactivity levels.The scientometric analysis may encourage researchers to seek out gaps in the literature that will aid in the long-term,multifaceted use of palm oil wastes in the asphalt pavement industry.Furthermore,the study recommends employing and researching the enormous potential of using palm oil waste in the pavement sectors because they are more sustainable and have better performance.However,there are some barriers to using palm oil waste in the asphalt pavement industry,such as a lack of design standards and guidelines,inefficient raw material pro-cessing conversion facilities,and large-scale production equipment.展开更多
This study aims to introduce an appropriate analytical method for asphalt pavement based upon unified strength theory (UST). The traditional maximum shear stress strength theory (MSST) cannot describe the marked d...This study aims to introduce an appropriate analytical method for asphalt pavement based upon unified strength theory (UST). The traditional maximum shear stress strength theory (MSST) cannot describe the marked difference between tension strength and compressive strength or variable intermediate principal stress, which significantly affects the geotechnical materials. Our studies try to find a new asphalt pavement failure criterion that considers the influence of both tension-compression strength ratio and intermediate principal stress of asphalt mixture. In order to select a suitable theory on pavement material, the UST is introduced and compared with the traditional theory. Results show that the tension-compression strength ratio of asphalt mixture, which is used as a material parameter, dramatically affects the stress and stress distribution law in pavement; the pavement stress level increases dramatically after considering the intermediate principal stresses. Therefore, the UST which considers both tension-compression strength ratio and intermediate principal stress is more in line with the material characteristics of asvhalt pavement.展开更多
On the basis of the equivalent axle load action frequency, the traffic classifications of rural roads as well as their corresponding types are classified. The asphalt pavement structure, road surface types and thickne...On the basis of the equivalent axle load action frequency, the traffic classifications of rural roads as well as their corresponding types are classified. The asphalt pavement structure, road surface types and thickness of the rural roads are suggested for the various action frequency of the equivalent axle load. Furthermore, the roadbase thickness graphs are provided according to different equivalent axle load action frequency with different roadbed modulus and road surface modulus taken into account.展开更多
Asphalt pavement rtting is a major safety concem and is one of the main distress modes of asphalt pavement.Research into asphalt pavement mixes that provide strong resistance for nutting is considered of great signifi...Asphalt pavement rtting is a major safety concem and is one of the main distress modes of asphalt pavement.Research into asphalt pavement mixes that provide strong resistance for nutting is considered of great significance as it can help provide extended pavement life and significant cost savings in pavement maintenance and rehabilitation.The objectives of this study are to develop numernical models to investigate the ntting of asphalt concrete pavements and to find optimal design of asphalt pave-ment mix for nutting resistance.Three-dimensional Finite Element mod-els were first developed to simulate both the axial compression and wheel track testing in which a visco elastic-plastic material model was used to predict the ntting of the asphalt concrete pavements.A strain hardening creep model with the material parameters developed from experimental testing was employed to model the time-dependent characteristics of the asphalt concrete pavements.The results were validated against the pre-vious experimental wheel track test results of different pavement mixes.Finally,optimisation techniques using the Design Of Experiments method were applied to the simulation rutting results by varying creep parameters to identify their effects on rutting resistance in order to obtain an optimal asphalt pavements mixes.The results of this paper clearly demonstrate an efficient and effective experimental-numerical method and tool set towards optimal design for asphalt concrete pavements for rutting resis-tance.展开更多
A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy ...A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy from the asphalt pavement in a large scale. The open circuit voltage of the harvester was obtained by the piezoelectric constant d<sub>33</sub> of the piezoelectric ceramic. The harvester is different from the cymbal harvester which works by the piezoelectric constant d<sub>31</sub>. The finite element model of the single harvester was constructed. The open circuit voltage increased with increase of the outer load. The finite element model of the single harvester buried in the asphalt pavement was built. The open circuit voltage, the deformation difference percent and the stress of the ceramic of the harvester were obtained with different buried depth. The open circuit voltage decreased when the buried depth was increased. The proper buried depth of the harvester should be selected as 30 - 50 mm. The effects of structure parameters on the open circuit voltage were gotten. The output voltage about 64.442 V could be obtained from a single harvester buried under 40 mm pavement at the vehicle load of 0.7 MPa. 0.047 mJ electric energy could be gotten in the harvester. The output power was about 0.705 mW at 15 Hz vehicle load frequency.展开更多
基金funded by Key Scientific Research Project of Heilongjiang Provincial Department of Transportation(Grant number MH20200828)National Natural Science Foundation of China joint fund for regional innovation and development(Grant number U20A20315)。
文摘The asphalt pavement longitudinal crack is a common distress in cold regions,resulting from uneven deformation of the subgrade.Analysis of the correlation law between uneven deformation and crack distress is of positive significance for understanding the mechanism of crack initiation,and putting forward treatment measures.In view of the complexity of longitudinal crack inducement and road surface deformation,the grey relational method was used to analyze this relationship.Through long-term monitoring of the vertical deformation data of typical road sections,the vertical deformation law of the pavement surface and its deformation characteristics under the action of temperature field are analyzed.Parameters such as vertical relative deformation,vertical relative deformation rate and vertical differential deformation VDSr were constructed to describe vertical deformation characteristics.Typical distribution characteristics of longitudinal fractures and their length and distribution characteristics are also described.The grey correlation analysis theory was utilized to analyze the relationship between deformation characteristics of sections,cross sections and monitoring points and longitudinal crack characteristics(length and location).The analysis reveals a linear positive correlation or a high correlation between several indicators.This study can provide a deeper understanding of the occurrence and development mechanism of longitudinal cracks in asphalt pavement of cold areas,and give references for the research of road engineering structure,materials and distress prevention.
文摘A two-layer implicit difference scheme is employed in the present study to determine the temperature distribution in an asphalt pavement.The calculation of each layer only needs four iterations to achieve convergence.Furthermore,in order to improve the calculation accuracy a swarm intelligence optimization algorithm is also exploited to inversely analyze the laws by which the thermal physical parameters of the asphalt pavement materials change with temperature.Using the basic cuckoo and the gray wolf algorithms,an adaptive hybrid optimization algorithm is obtained and used to determine the relationship between the thermal diffusivity of two types of asphalt pavement materials and the temperature.As shown by the results,the prediction accuracy achievable with this approach is higher than that of the linear model.
基金supported by the Scientific Research Program Funded by Shaanxi Provincial Education Department(Program No.21JK0830)Shaanxi Provincial Natural Science Foundation Research Project(Program No.2022JM-166).
文摘The interlayer contact condition of asphalt pavement has a significant impact on stress transfer and energy dissipation with adjacent layers,so a model considering the bonding condition of adjacent layers is introduced for evaluating the structural response of asphalt pavement.The pavement structure,the material characterization with temperature,the interlayer contact bonding model,the types of bond failure,and the prediction method of pavement life are described in detail.Results show that the transversely tensile strains at the top of asphalt pavement under the condition of high temperature were easy to cause the top-down cracking outside the edge of the dual tire.The bonding failure has a significant influence on strains at the bottom of the surface course with the condition of high temperature,especially,the longitudinally tensile strains would increase obviously as the disengaging area between the surface course of asphalt pavement and the base layer increases.Finally,it is proved that the surface course is vulnerable to form deformations and cause damage under the combined action of low speed and high temperature.
文摘The acceleration of urbanization has promoted the increase in the number of urban highway projects,resulting in an increase of emphasis on the quality of urban highway projects.The quality and safety of highway construction directly affects the driving comfort,safety,and service life after it is put into operation.Among them,asphalt pavement is an important structure in highway construction,and it is also a key link that directly affects the construction quality.In order to ensure the quality of construction,it is necessary to strengthen on-site testing during the construction process to discover problems in time,and to ensure that the construction is up to standard.This paper mainly presents an analysis on the necessity and application of on-site quality inspection technology for asphalt pavement construction of highway engineering,and outlines measures to improve highway engineering construction testing technology.
文摘The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an important impact on the overall quality of highway construction.Therefore,it is necessary to conduct scientific and reasonable tests and detections for highway asphalt pavement.This paper presents a discussion on the test and detection technology of highway asphalt pavement for future reference.
文摘Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.
基金Project(2012zzts019)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(201306370121)supported by State Scholarship Fund of ChinaProject(51248006)supported by the National Natural Science Foundation,China
文摘This work presented the development and validation of an analytical method to predict the transient temperature field in the asphalt pavement.The governing equation for heat transfer was based on heat conduction radiation and convection.An innovative time-dependent function was proposed to predict the pavement surface temperature with solar radiation and air temperature using dimensional analysis in order to simplify the complex heat exchange on the pavement surface.The parameters for the time-dependent pavement surface temperature function were obtained through the regression analysis of field measurement data.Assuming that the initial pavement temperature distribution was linear and the influence of the base course materials on the temperature of the upper asphalt layers was negligible,a close-form analytical solution of the temperature in asphalt layers was derived using Green's function.Finally,two numerical examples were presented to validate the model solutions with field temperature measurements.Analysis results show that the solution accuracy is in agreement with field data and the relative errors at a shallower depth are greater than those at a deeper one.Although the model is not sensitive to dramatic changes in climatic factors near the pavement surface,it is applicable for predicting pavement temperature field in cloudless days.
基金Funded by the Technology Research and Development Plan Program of Heilongjiang Province(No.GA19A501)。
文摘The binder properties were determined in accordance with Chinese standard such as ductility test, which allowed to measure the distance in centimeters that a standard briquette of asphalt had been stretched before breaking. Then, penetration test was carried out in order to know some properties of the asphalt, which are the hardness and the softness. Finally, softening point test was carried out in order to determine the temperature at which the bitumen attains a particular degree of softening under the specification of the test. According to Chinese standard for performance tests, firstly, Marshall test was carried out in order to measure the theoretical density, air voids, voids filled with asphalt, stability, flow, and voids in mineral aggregate of asphalt specimens. Secondly, Freeze-thaw splitting test was carried out in order to determine Splitting strength ratio. Finally, dynamic stability (rutting) test was carried out to determine average dynamic stability. Beside the tests carried out, the gradation of the extracted aggregate in accordance with American Association of State Highway and Transportation Officials was carried out to determine the dimensions of the particles weight distribution. Furthermore, both the percentage of recycled asphalt pavement materials and binder in mixture were determined to know how much of the new material during the mixture was needed. However, two specimens were used to evaluate the performance of recycled asphalt pavement materials. One specimen of recycled asphalt pavement materials was ten years old, and another one of recycled asphalt pavement materials was five years old. The results show that the conditions of the environment such as moisture, temperature, and age, decrease the ductility and penetration properties of binder when increase the softening point property of binder. Then the gradation of recycled asphalt pavement aggregate is of the required values to reuse in the mixture, while the flow ratio, the splitting strength ratio, and the dynamic stability ratio, are less than the required value test. With regard to the properties of mixture of recycled asphalt pavement material binder with rejuvenator, the results show that when the penetration and ductility versus percentage of rejuvenator increase, softening point versus percentage of rejuvenator decreases. Also, when the bitumen and rejuvenator percentage increase, the air voids decrease. Consequently, voids filled with asphalt and voids in the mineral aggregate increase. Moreover, the theoretical density and stability values decrease in a mixture containing four-point fifty percent to six percent of bitumen and rejuvenator, whereas the flow values increase. More interestingly, with four percent to four-point fifty percent mixture ratio of bitumen and rejuvenator, density, stability, and flow values increase. The splitting strength ratio values of mixtures and the dynamic stability test (rutting test) values of mixtures with forty percent of specimen one and specimen two respectively are greater than the required value of the standard test. In addition, the high percentage of rejuvenator increases the rut of pavement, in the same manner, the low percentage of rejuvenator induces low rut. In conclusion, the binder content from recycled materials without rejuvenator seems not be sufficient to be reused on the new pavement while the aged recycled material seems to be performed better than no aged recycled material with rejuvenator into bitumen. Then, the rejuvenator can influence the bitumen properties and performance of the pavement. Finally, the pavement made by only recycled pavement materials as a base layer appears to be more economical but cannot be more effective than the pavement made by mixture of new and recycled pavement materials as a base layer.
文摘Nowadays asphalt pavement structure bearing is not the main subject for pursuers to study.Comparatively,the pavement performance is more important and emphasized.Based on this,rutting and cracking analysis is introduced into pavement optimization.A optimization model based on these two considerations is also established.The genetic algorithms (GAs) is adopted to solve the model.It is an intellective method.This research provides a new idea and technique for asphalt pavement structure optimization.
基金Funded by the National High-tech Research and Development Program of China ('863' Program) (2009AA11Z106)
文摘The property of reclaimed asphalt pavement(RAP) mixture will be affected mainly by composition of old asphalt/soil and cement content in CIR system. We studied the relationship between A/S and cementitious materials. It showed that if there was no soil in RAP, the unconfined compressive strength was only from 0.18 MPa to 1.07 MPa even if adding cement was from 2% to 6%, and RAP samples collapsed during conserving in water. The optimum water content rose from 6.5% to 11% with the declining of A/S from S=0 to A/S=1/5. Five RAP samples all got the maximum compressive strength when A/S=5/5, and the maximum compressive strength of the samples adding 6% cement was 3.17 MPa. It showed that the capacity of RAP was not only affected by A/S, but also by the content of cement. The dynamic modulus of RAP will increase with the rise of loading frequency and decrease with the temperature rising. SEM test showed that C-S-H interlacing formed the netted structure, and it enwrapped the aggregate and improved the strength of RAP.
基金Funded in Part by the National Natural Science Foundation of China(No.50908177)the National High-tech Research and Development Program of China(863 Program)(No.2012AA112506)
文摘This paper presents the way to harvest mechanical energy from asphalt pavement by piezoelectric generator. Results show that the potential energy in asphalt pavement can be up to 150 kW/h per lane per kilometre. Part of the mechanical energy can be harvested by piezoelectric transducers. The performance of seven typical transducers is examined through finite element analysis. Results show that PZT piles and multilayer, cymbal and bridge can work in asphalt pavement environment. PZT piles and multilayer have higher energy converting rate, However, the total harvested energy is small if these transducers are embedded directly in pavement. A prototype pavement generator is developed using PZT piles to increase the harvested energy. The generator can harvest more than 50 kW/h energy from the pavement under heavy traffic. 8-16 PZT piles are recommended for one generator. Round shape is suggested for the PZT piles to reduce the concentration of stress. And multilayer structure is recommended for PZT piles to decrease the electric potential of generator. The generator can be extended as sensor in the asphalt pavement, which can be used to monitor the traffic, pavement stress and temperature.
基金This paper is part of the research work of National Key R&D Project of China(Grant No.2021YFB2600601,2021YFB2600605,2021YFB 2600600)The authors would like to acknowledge the financial support provided by the National Natural Science Foundation of China(Grant No.51922030)“the Fundamental Research Funds for the Central Universities”(Grant No.2242022R10019).
文摘To understand the research status of asphalt pavement texture,the related achievements and progress of pavement surface texture were systematically sorted out from three aspects:the characterization of pavement surface texture,the texture measurement and evaluation,and the relationship between texture and the skid resistance.Based on the statistical geometric characteristics,the spectral characteristics,the fractal characteristics and the multifractal characteristics,the characteristics of pavement texture were discussed.The test methods of pavement texture were divided into two categories:direct measurement methods and indirect measurement methods.The advantages and disadvantages of each measurement method were summarized.The effects of macro-texture and micro-texture on asphalt pavement were discussed,respectively.The relationship between texture and skid resistance was studied.This review shows that multifractal theory should be further studied from the aspect of road engineering.High-precision non-contact integrated detection technology should be further studied to meet the needs of complex testing environments.The method of finite element numerical simulation has potential for the analysis of pavement skid resistance.In addition,methods such as big data analysis,neural network,and deep learning should be studied to achieve the intelligent perception and management of the whole state of skid resistance prediction.
文摘Based on the investigation of long-life asphalt pavement at home and abroad,the development of long-life asphalt pavement technology in Shandong Province,China is reviewed in this paper.The structural combination char-acteristics of typical long-life asphalt pavement in Shandong Province and their popularization and application are introduced.The application effect of combined base long-life asphalt pavement,which has been widely promoted,is evaluated.At the same time,taking the Binda perpetual pavement test road in Shandong Province as an example,the dynamic response and long-term performance evolution of long-life asphalt pavement are analyzed over a period of more than 17 years.Sections S1,S2,and S3 present information about full-depth asphalt pavement.Section S4 describes combined base asphalt pavement.The results show that the maximum strain of S1–S4 is within the endurance strain limit.S1,S2,S3 and S4 are all expected to be long-life asphalt pavements.In the current study,Sections S1–S4 were maintained in good condition during a service period of more than 17 years with no structural cracks and good deflection,rutting,and IRI indexes.The deflection index was stable without growth,and the IRI was also relatively stable following the opening to traffic.The rutting depth un-derwent a slight cumulative increase within 8 years of opening,and then stabilized.The average rutting depth over the 17-year period was less than 15 mm.Therefore,S1–S4 meet the design standards required for use as long-life pavements.From the perspectives of resource saving,energy saving,and emission reduction and service performance,full-depth asphalt pavement can be considered to represent a new generation of green and durable pavement structures with great future promotion potential.
基金This paper was financially supported by the National Natural Science Foundation of China(No.52178420 and 51878229)Research Project of Liaoning Provincial Transportation Investment Group Co.,Ltd.(202004)Key R&D projects in Liaoning Province(No.2020JH2/10300097).
文摘Reclaimed asphalt pavement(RAP)has significant recycling value because it contains nonrenewable resources including asphalt and aggregate.However,thus far,only a small part of RAP materials can be used in the con-struction of recycled asphalt pavement,and the usage is regarded as a low-value utilization in the underlying layers.One of the most important reasons for this shortcoming is the problem of false particle size and pseudo gradation of RAP materials.Therefore,identifying suitable asphalt-aggregate separation technology is essential for improving the utilization of RAP materials in recycled asphalt mixture and enhancing the construction quality of recycled asphalt pavement.To address this,the paper performed a systematic review of asphalt-aggregate separation technologies for processing RAP materials and their prospects.Firstly,based on the composition of the asphalt mixture and the characteristics of RAP materials after aging,the key RAP separation technologies were proposed.Then,the concept,principle,and implementation methods of physical,chemical,and biological sep-aration methods of RAP materials were comprehensively analyzed.Moreover,the advantages and disadvantages of various separation technologies were discussed by comparing them with the related technologies in the petrochemical industry.The application prospects of various asphalt-aggregate separation methods for RAP materials can provide a reference for upgrading and expanding solid waste recycling technology for asphalt pavement.
文摘To improve the quality of the Hong Kong–Zhuhai–Macao Bridge paving project,a new paving layer material,Guss-mastic asphalt(GMA),was proposed in this paper by combining the advantages of two types of cast asphalt mixtures:mastic asphalt(MA)and Guss asphalt(GA).Based on the characteristics of GMA,to simulate its actual production process,this study developed a small-simulated cooker mixing equipment.Moreover,the flow degree,60C dynamic stability,and impact toughness were proposed to be used to evaluate the construction and ease,high temperature stability,and fatigue resistance of GMA cast asphalt mixtures,respectively.Moreover,the quality control standards for GMA paving materials by indoor tests,field trial mix GMA material performance tests,and accelerated loading tests were finalized.The study showed that the developed simulated cooker yielded consistent mixing results in the same working environment as the engineering cooker device.Increasing the coarse aggregate incorporation rate,coarsening the mastic epure(ME)gradation composition,and using a smaller oil to stone ratio can reduce the flowability of the GMA materials to varying degrees.The four-point bending fatigue life and impact toughness of the different GMA materials are correlated well.A mobility of<20 s,60C dynamic stability of 400–800 times/mm,15C impact toughness of400 N⋅mm,and cooker car mixing temperature control standard of 210C–230C form an appropriate control index system for the design and production of GMA cast asphalt mixtures.Simultaneously,accelerated loading tests verified the accuracy and reliability of the quality control index system that has been used in the GMA paving project of the Hong Kong–Zhuhai–Macao Bridge deck and has achieved good application results.
文摘During the production of palm oil,a significant amount of waste is generated.However,because of inefficient handling and utilization,these wastes are becoming a larger issue.As a result,one initiative is to use these wastes in the pavement industry as sustainable materials.However,there is still a lack of understanding about the wider incorporation of palm oil waste in asphalt pavement and its performance.This study examines existing literature on the use of various wastes in the pavement industry,including palm oil clinker(POC),palm oil fibre(POF),palm kernel shell(PKS),and palm oil fuel ash(POFA).As a result,this paper presents a systematic review and scientometric investigation of related study publications on many uses of palm oil waste in the asphalt pavement industry and its performance from 2009 to 2022.The VOS viewer application was used to conduct the sciento-metric study analysis.The relationship between interactions detected in co-authored country studies cited sources of co-citation,and the keyword of the co-occurrence and publication source enabled the identification of the research gap.According to the systematic literature review,40%–60% POC can be used to fine aggregate for optimal performance,while 0–100%PKS can be used to replace coarse aggregate.In addition,50%–80% POFA or POC fine(POCF)can be used as a filler replacement,5%–8% POCF or POFA as a bitumen modifier,and 0.3% POF as a stabilizing additive.Furthermore,the study demonstrates that the safety of utilizing wastes with more than 50% CO_(2) emissions can be curtailed with minimal heavy metal leaching and radioactivity levels.The scientometric analysis may encourage researchers to seek out gaps in the literature that will aid in the long-term,multifaceted use of palm oil wastes in the asphalt pavement industry.Furthermore,the study recommends employing and researching the enormous potential of using palm oil waste in the pavement sectors because they are more sustainable and have better performance.However,there are some barriers to using palm oil waste in the asphalt pavement industry,such as a lack of design standards and guidelines,inefficient raw material pro-cessing conversion facilities,and large-scale production equipment.
基金Funded by the National Natural Science Foundation of China(No.51178348)
文摘This study aims to introduce an appropriate analytical method for asphalt pavement based upon unified strength theory (UST). The traditional maximum shear stress strength theory (MSST) cannot describe the marked difference between tension strength and compressive strength or variable intermediate principal stress, which significantly affects the geotechnical materials. Our studies try to find a new asphalt pavement failure criterion that considers the influence of both tension-compression strength ratio and intermediate principal stress of asphalt mixture. In order to select a suitable theory on pavement material, the UST is introduced and compared with the traditional theory. Results show that the tension-compression strength ratio of asphalt mixture, which is used as a material parameter, dramatically affects the stress and stress distribution law in pavement; the pavement stress level increases dramatically after considering the intermediate principal stresses. Therefore, the UST which considers both tension-compression strength ratio and intermediate principal stress is more in line with the material characteristics of asvhalt pavement.
文摘On the basis of the equivalent axle load action frequency, the traffic classifications of rural roads as well as their corresponding types are classified. The asphalt pavement structure, road surface types and thickness of the rural roads are suggested for the various action frequency of the equivalent axle load. Furthermore, the roadbase thickness graphs are provided according to different equivalent axle load action frequency with different roadbed modulus and road surface modulus taken into account.
基金This study is part of the FIRST project‘The development of numerical simulation and optimization technologies for optimal performance of concrete asphalt pavements taking into account the traffic and climate conditions of Vietnam’(35/FIRST/1a/UTC).We acknowledge FIRST Project,Ministry of Science and Technology,Vietnam,for sponsoring this project。
文摘Asphalt pavement rtting is a major safety concem and is one of the main distress modes of asphalt pavement.Research into asphalt pavement mixes that provide strong resistance for nutting is considered of great significance as it can help provide extended pavement life and significant cost savings in pavement maintenance and rehabilitation.The objectives of this study are to develop numernical models to investigate the ntting of asphalt concrete pavements and to find optimal design of asphalt pave-ment mix for nutting resistance.Three-dimensional Finite Element mod-els were first developed to simulate both the axial compression and wheel track testing in which a visco elastic-plastic material model was used to predict the ntting of the asphalt concrete pavements.A strain hardening creep model with the material parameters developed from experimental testing was employed to model the time-dependent characteristics of the asphalt concrete pavements.The results were validated against the pre-vious experimental wheel track test results of different pavement mixes.Finally,optimisation techniques using the Design Of Experiments method were applied to the simulation rutting results by varying creep parameters to identify their effects on rutting resistance in order to obtain an optimal asphalt pavements mixes.The results of this paper clearly demonstrate an efficient and effective experimental-numerical method and tool set towards optimal design for asphalt concrete pavements for rutting resis-tance.
文摘A novel square canister piezoelectric energy harvester was proposed for harvesting energy from asphalt pavement. The square of the harvester was of great advantage to compose the harvester array for harvesting energy from the asphalt pavement in a large scale. The open circuit voltage of the harvester was obtained by the piezoelectric constant d<sub>33</sub> of the piezoelectric ceramic. The harvester is different from the cymbal harvester which works by the piezoelectric constant d<sub>31</sub>. The finite element model of the single harvester was constructed. The open circuit voltage increased with increase of the outer load. The finite element model of the single harvester buried in the asphalt pavement was built. The open circuit voltage, the deformation difference percent and the stress of the ceramic of the harvester were obtained with different buried depth. The open circuit voltage decreased when the buried depth was increased. The proper buried depth of the harvester should be selected as 30 - 50 mm. The effects of structure parameters on the open circuit voltage were gotten. The output voltage about 64.442 V could be obtained from a single harvester buried under 40 mm pavement at the vehicle load of 0.7 MPa. 0.047 mJ electric energy could be gotten in the harvester. The output power was about 0.705 mW at 15 Hz vehicle load frequency.