FUZZY ADAPTIVE CONTROL OF FLEXIBLE-LINK ROBOT MANIPULATOR

A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip position. The Lagrangian principle is utilized to model the dynamic function of the single-degree flexible manipulator incorporating the assumed modes method. Simulation results of the fuzzy adaptive control method in the location control and the trajectory tracking with different tip disturbances are presented and compared with the results of the classic PD control. It shows that the controller can obtain the stable and robust performance.

Bifurcation and buckling analysis of a unilaterally confined self-rotating cantilever beam

A nonlinear dynamic model of a simple nonholonomic system comprising a self-rotating cantilever beam subjected to a unilateral locked or unlocked constraint is established by employing the general Hamilton＇s Variational Principle. The critical values, at which the trivial equilibrium loses its stability or the unilateral constraint is activated or a saddle-node bifurcation occurs, and the equilibria are investigated by approximately analytical and numerical methods. The results indicate that both the buckled equilibria and the bifurcation mode of the beam are different depending on whether the distance of the clearance of unilateral constraint equals zero or not and whether the unilateral constraint is locked or not. The unidirectional snap-through phenomenon （i.e. catastrophe phenomenon） is destined to occur in the system no matter whether the constraint is lockable or not. The saddle-node bifurcation can occur only on the condition that the unilateral constraint is lockable and its clearance is nonzero. The results obtained by two methods are consistent.

Probabilistic stability of uncertain composite plates and stochastic irregularity in their buckling mode shapes:A semi-analytical non-intrusive approach

In this study,the mechanical properties of the composite plate were considered Gaussian random fields and their effects on the buckling load and corresponding mode shapes were studied by developing a semi-analytical nonintrusive approach.The random fields were decomposed by the Karhunen−Loève method.The strains were defined based on the assumptions of the first-order and higher-order shear-deformation theories.Stochastic equations of motion were extracted using Euler-Lagrange equations.The probabilistic response space was obtained by employing the nonintrusive polynomial chaos method.Finally,the effect of spatially varying stochastic properties on the critical load of the plate and the irregularity of buckling mode shapes and their sequences were studied for the first time.Our findings showed that different shear deformation plate theories could significantly influence the reliability of thicker plates under compressive loading.It is suggested that a linear relationship exists between the mechanical properties’variation coefficient and critical loads’variation coefficient.Also,in modeling the plate properties as random fields,a significant stochastic irregularity is obtained in buckling mode shapes,which is crucial in practical applications.

Nonlinear Modeling and Analysis of a Novel Robot Fish with Compliant Fluidic Actuator as a Tail

Compliant mobile robotics is a developing bioinspired concept of propulsion for locomotion.This paper studies the modeling and analysis of a compliant tail-propelled fish-like robot.This biomimetic design uses a fluid-filled network of channels embedded into the soft body to actuate the compliant tail and generate thrust.This study analyzes the nonlinear dynamics of Fish Tail Fluidic Actuator(FTFA).The fluidic expansion under pressure creates a bending moment in the tail.It is demonstrated that the tail response follows the theoretical formulation extracted from the accurate modeling.In this modeling,tail is assumed as a continuous Euler–Bernoulli beam considering large deflection and nonlinear strain.Then,the implementation of Hamilton's principle and the method of calculation lead to the motion equations.The assumed mode method is used to achieve the mathematical model in the multi-mode system that is more similar to the soft continuous system.We investigate the tendencies of the tail amplitude,swimming speed,and Strouhal number when the input driving frequency changes.The simulation results disclose that high swimming efficiency can be obtained at the multi-order resonances;meanwhile,the compliant fish robot is pushed at the corresponding frequency illustrating nonlinear behavior.

Flutter analysis of hybrid metal-composite low aspect ratio trapezoidal wings in supersonic flow

An effective 3D supersonic Mach box approach in combination with non-classical hybrid metal-composite plate theory has been used to investigate flutter boundaries of trapezoidal low aspect ratio wings. The wing structure is composed of two main components including aluminum material（in-board section） and laminated composite material（out-board section）. A global Ritz method is used with simple polynomials being employed as the trial functions. The most important objective of the present research is to study the effect of composite to metal proportion of hybrid wing structure on flutter boundaries in low supersonic regime. In addition, the effect of some important geometrical parameters such as sweep angle, taper ratio and aspect ratio on flutter boundaries were studied. The results obtained by present approach for special cases like pure metallic wings and results for high supersonic regime based on piston theory show a good agreement with those obtained by other investigators.