Experimental Study of Local Scour Around Four Piles Under Different Attack Angles and Gap Ratios

In an effort to investigate and quantify the patterns of local scour,researchers embarked on an in-depth study using a systematic experimental approach.The research focused on the effects of local scour around a set of four piles,each subjected to different hydromechanical conditions.In particular,this study aimed to determine how different attack angles—the angles at which the water flow impinges on the piles,and gap ratios—the ratios of the spacing between the piles to their diameters,influence the extent and nature of scour.A comprehensive series of 35 carefully designed experiments were orchestrated,each designed to dissect the nuances in how the gap ratio and attack angle might contribute to changes in the local scour observed at the base of pile groups.During these experimental trials,a wealth of local scour data were collected to support the analysis.These data included precise topographic profiles of the sediment bed around the pile groups,as well as detailed scour time histories showing the evolution of scour at strategic feature points throughout the test procedure.The analysis of the experimental data provided interesting insights.The study revealed that the interplay between the gap ratio and the attack angle had a pronounced influence on the scouring dynamics of the pile groups.One of the key observations was that the initial phases of scour,particularly within the first hour of water flow exposure,were characterized by a sharp increase in the scour depth occurring immediately in front of the piles.After this initial rapid development,the scour depth transitioned to a more gradual change rate.In contrast,the scour topography around the piles continuously evolved.This suggests that sediment displacement and the associated sculpting of the seabed around pile foundations are sustained and progressive processes,altering the underwater landscape over time.The results of this empirical investigation have significant implications for the design and construction of offshore multi-pile foundations,providing a critical reference for engineers and designers to estimate the expected scour depth around such structures,which is an integral part of decisions regarding foundation design,selection of structural materials,and implementation of scour protection measures.

Numerical investigation on properties of attack angle for an opposing jet thermal protection system

The three-dimensional Navier Stokes equation and the k-ε viscous model are used to simulate the attack angle characteristics of a hemisphere nose-tip with an opposing jet thermal protection system in supersonic flow conditions. The numerical method is validated by the relevant experiment. The flow field parameters, aerodynamic forces, and surface heat flux distributions for attack angles of 0°, 2°, 5°, 7°, and 10° are obtained. The detailed numerical results show that the cruise attack angle has a great influence on the flow field parameters, aerodynamic force, and surface heat flux distribution of the supersonic vehicle nose-tip with an opposing jet thermal protection system. When the attack angle reaches 10°, the heat flux on the windward generatrix is close to the maximal heat flux on the wall surface of the nose-tip without thermal protection system, thus the thermal protection has failed.

Numerical study of attack angle characteristics for integrated hypersonic vehicle

The two-dimensional coupled implicit Navier-Stokes equations and standard k-ε viscous models are used to simulate the angle of attack characteristics of an inte- grated hypersonic vehicle with a hark head configuration under three kinds of working conditions： inlet cut-off, engine through-flow, and engine ignition. Influence of each com- ponent on aero-propulsive performance of the vehicle is discussed. It is concluded that the longitudinal static stability of the vehicle is good, and there is enough lift-to-drag ratio to satisfy the flying requirement of the vehicle. At the same time, it is important to change configurations of engine and upper surface of airframe to improve aero-propulsive ~erformance of the vehicle.

Influences of attack angle and mach number on aerodynamic characters of typical sections of extra-long blade in a steam turbine

On super-sonic or trans-sonic planar cascade wind tunnel of free jet intermittent type, wind blowing experiments were performed on the typical sections of stator and rotor blades in the last stage of ultra-ultra-critical steam turbine with extra-long blade of 1200mm. The influences of attack angle and Mach number on the aerodynamic performances of these sections of the blade profiles were verified, and their operating ranges were also specified.

Effect of attack angle change on hydrodynamic character of supercavitating bodies

A series of experiments has been done in a moderate-velocity cavitation tunnel to investigate the effects of attack angle change on hydrodynamic characters of supercavitation. Hydrodynamic characters of the aft section at various attack angles were compared. The investigation shows that hydrodynamic forces of the aft section are dependent of supercavity shapes at different attack angles,and the magnitude of hydrodynamic forces of the aft section varies with the change of attack angle. When the aft section is in the fully wetted case,the drag coefficient changes little. Lift and moment coefficients both increase with the increased attack angle,and the increase magnitude is not large. When the aft body planing is on the cavity boundary,the drag coefficient of nonzero attack angle is larger than that of zero attack angle,and the maximal lift and moment coefficients both vary obviously with the increased attack angle. In the case that the body is fully enveloped by cavity,the drag coefficient,lift coefficient and moment coefficient are nearly constant with the change of attack angles.

Gated Neural Network-Based Unsteady Aerodynamic Modeling for Large Angles of Attack

Modeling of unsteady aerodynamic loads at high angles of attack using a small amount of experimental or simulation data to construct predictive models for unknown states can greatly improve the efficiency of aircraft unsteady aerodynamic design and flight dynamics analysis.In this paper,aiming at the problems of poor generalization of traditional aerodynamic models and intelligent models,an intelligent aerodynamic modeling method based on gated neural units is proposed.The time memory characteristics of the gated neural unit is fully utilized,thus the nonlinear flow field characterization ability of the learning and training process is enhanced,and the generalization ability of the whole prediction model is improved.The prediction and verification of the model are carried out under the maneuvering flight condition of NACA0015 airfoil.The results show that the model has good adaptability.In the interpolation prediction,the maximum prediction error of the lift and drag coefficients and the moment coefficient does not exceed 10%,which can basically represent the variation characteristics of the entire flow field.In the construction of extrapolation models,the training model based on the strong nonlinear data has good accuracy for weak nonlinear prediction.Furthermore,the error is larger,even exceeding 20%,which indicates that the extrapolation and generalization capabilities need to be further optimized by integrating physical models.Compared with the conventional state space equation model,the proposed method can improve the extrapolation accuracy and efficiency by 78%and 60%,respectively,which demonstrates the applied potential of this method in aerodynamic modeling.

Influence of impact velocity and impact attack angle of bullets on damage of human tissue surrogate--ballistic gelatin

Purpose Terminal performance of a bullet in human body is critical for the treatment of gunshot injury and optimization of bullet design.The effects of the impact velocity(v_(0))and the impact attack angle(δ_(0))of the bullet on its terminal performance was investigated,using a new evaluation method(called expansion method)based on the expansion of cracks and the permanent cavity wall in ballistic gelatin.Methods Ballistic gelatin was used to simulate human body.The 7.62 mm×39 mm rifle bullets with different v_(0)(600–76_(0)m/s)andδ_(0)(0°–6°)were fired into the gelatin blocks.The gelatin block was cut into slices of about 2_(0)mm thickness.The cracks and the permanent cavity on each slice were obtained manually.The damaged gelatin was determined using two methods:expanding the permanent cavity but ignoring the cracks,and expanding both the permanent cavity and the cracks.The relations between the damaged gelatin and v_(0)andδ_(0)were obtained using linear fitting method.Results According to the distribution of the damaged gelatin along the penetration depth,the damaged gelatin block could be divided into two parts:the less damaged part and the severely damaged part.The length of the less damaged part depends mostly onδ_(0);while the average damaged area of this part depends on bothδ_(0)as well as v_(0).The cracks contributed significantly to the total volume of damaged gelatin,particularly when the expansion was larger than 1.9 mm.The total damaged gelatin increases with v_(0),δ_(0)and the expansion extent.The average length of equivalent cracks grew with v_(0)andδ_(0)when considering the cracks,and decreased with v_(0)when ignoring the cracks.Conclusion The expansion method is suitable to investigate the influence of different factors of bullets on their terminal performance.The characteristics of the damaged gelatin have a linear relationship with the initial attack angle(δ_(0))and the initial velocity(v_(0))of the bullet.

ASYMMETRIC VORTICES FLOW OVER SLENDER BODY AND ITS ACTIVE CONTROL AT HIGH ANGLE OF ATTACK

The studies of asymmetric vortices flow over slender body and its active control at high angles of attack have significant importance for both academic field and engineering area.This paper attempts to provide an update state of art to the investigations on the fields of forebody asymmetric vortices.This review emphasizes the correlation between micro-perturbation on the model nose and its response and evolution behaviors of the asymmetric vortices.The critical issues are discussed, which include the formation and evolution mechanism of asymmetric multi-vortices;main behaviors of asymmetric vortices flow including its deterministic feature and vortices flow structure;the evolution and development of asymmetric vortices under the perturbation on the model nose;forebody vortex active control especially discussed micro-perturbation active control concept and technique in more detail.However present understanding in this area is still very limited and this paper tries to identify the key unknown problems in the concluding remarks.

Control of Asymmetric Flow Fields of Slender Bodies at High Angle of Attack

The wind tunnel experiments is conducted to get inspiration for understanding the mechanism of the asymmetric flow pattern and developing an innovative flow control technique for a slender body at high angle of attack. The bi-stable situation of the side forces is observed, which could be easily switched by a tiny disturbances either from coming flow or from artificial disturbances at nose tip （including manufacturing defect）. In turbulent flows the side forces switched randomly between positive and negative. There exists a hysteresis loop of side force with the rolling angle. A rod in front of the slender body is used to change the vortex pattern, which could be kept even the rod is moved out from the stream. A miniature strake attached to the nose tip of the model can be moved to different circumferential position. When the strake is stationary, the hysteresis loop disappears and the side force does not change with the turbulent fluctuation of coming flow. The results from dynamic measurements of section side force indicates that when the strake swung at lower frequency the side force can follow the cadence of the swinging strake. With increasing frequency, the magnitude of the side force decreases. At still high frequency, the side force diminishes to zero. If the strake is swinging, while the middle position can be changed to different circumferential angle Фs on either left or right side, the side forces can be changed proportionally with the angle Фs. On the basis of the experimental results, the mechanism of the asymmetry is discussed.

Mechanism of transition in a hypersonic sharp cone boundary layer with zero angle of attack

Firstly, the steady laminar flow field of a hypersonic sharp cone boundary layer with zero angle of attack was computed. Then, two groups of finite amplitude T-S wave disturbances were introduced at the entrance of the computational field, and the spatial mode transition process was studied by direct numerical simulation （DNS） method. The mechanism of the transition process was analyzed. It was found that the change of the stability characteristics of the mean flow profile was the key issue. Furthermore, the characteristics of evolution for the disturbances of different modes in the hypersonic sharp cone boundary layer were discussed.

An experimental study on the effects of friction modifiers on wheel-rail dynamic interactions with various angles of attack

By modifying friction to the desired level,the application of friction modifiers(FMs)has been considered as a promising emerging tool in the railway engineering for increasing braking/traction force in poor adhesion conditions and mitigating wheel/rail interface deterioration,energy consumption,vibration and noise.Understanding the effectiveness of FMs in wheel–rail dynamic interactions is crucial to their proper applications in practice,which has,however,not been well explained.This study experimentally investigates the effects of two types of top-of-rail FM,i.e.FM-A and FM-B,and their application dosages on wheel–rail dynamic interactions with a range of angles of attack(AoAs)using an innovative well-controlled V-track test rig.The tested FMs have been used to provide intermediate friction for wear and noise reduction.The effectiveness of the FMs is assessed in terms of the wheel–rail adhesion characteristics and friction rolling induced axle box acceleration(ABA).This study provides the following new insights into the study of FM:the applications of the tested FMs can both reduce the wheel–rail adhesion level and change the negative friction characteristic to positive;stick–slip can be generated in the V-Track and eliminated by FM-A but intensified by FM-B,depending on the dosage of the FMs applied;the negative friction characteristic is not a must for stick–slip;the increase in ABA with AoA is insignificant until stick–slip occurs and the ABA can thus be influenced by the applications of FM.

COMPUTATION OF FIELD STRUCTURE AND AERODYNAMIC CHARACTERISTICS OF DELTA WINGS AT HIGH ANGLES OF ATTACK

A numerical investigation of the structure of the vortical flowfield over delta wings at high angles of attack in longitudinal and with small sideslip angle is presented. Three-dimensional Navier-Stokes numerical simulations were carried out to predict the complex leeward-side flowfield characteristics that are dominated by the effect of the breakdown of the leading-edge vortices. The methods that analyze the flowfield structure quantitatively were given by using flowfield data from the computational results. In the region before the vortex breakdown, the vortex axes are approximated as being straight line. As the angle of attack increases, the vortex axes are closer to the root chord, and farther away from the wing surface. Along the vortex axes, as the adverse pressure gradients occur, the axial velocity decreases, that is, A is negativee, so the vortex is unstable, and it is possible to breakdown. The occurrence of the breakdown results in the instability of lateral motion for a delta wing, and the lateral moment diverges after a small perturbation occurs at high angles of attack. However, after a critical angle of attack is reached the vortices breakdown completely at the wing apex, and the instability resulting from the vortex breakdown disappears.

Influence of Angle of Attack and Lateral Force between Wheel and Rail on Wear of Rail ——a Laboratory Study

Angle of attack and lateral force are two important parameters influencing wheel rail wear. This paper deals with the question of influences of the angle of attack and the lateral force on the wear of rail. A series of experiments are conducted on 1/4 JD 1 Wheel/Rail Tribology Simulation Facility. The angles of attack selected in the tests are 0°16′30″, 0°37′40″ and 1°0′0″ respectively. The lateral forces selected in the tests are 0.694 kN, 1.250 kN and 2.083 kN, respectively corresponding to the lateral forces of 25 kN, 45 kN and 75 kN measured in the field, with the aim of keeping the same ratio of L/V between laboratory and field conditions. It is found that the larger the angle of attack is, the more serious the wear of rail is. The relation of rail wear rate versus angle of attack is non linear, and the relation of rail wear rate versus lateral force is approximately linear. The influence of angle of attack is more serious than that of lateral force. For the tractive wheelset, the wear index involving linear and quadratic function terms of angle of attack has good agreement with the limited experimental data. Some conclusions are given.

Propulsive performance and flow field characteristics of a 2-D flexible fin with variations in the location of its pitching axis

The thrust coefficients and propulsive efficiency of a two-dimensional flexible fin with heaving and pitching motion were computed using FLUENT. The effect of different locations of the pitching axis on propulsive performance was examined using three deflexion modes which are respectively, modified Bose mode, cantilever beam with uniformly distributed load and cantilever beam with non-uniformly distributed load. The results show that maximum thrust can be achieved with the pitching axis at the trailing edge, but the highest propulsive efficiency can be achieved with the pitching axis either 1/3 of the chord length from the leading edge in modified Bose mode, or 2/3 of the chord length from the leading edge in cantilever beam mode. At the same time, the effects of the Strouhal number and maximal attack angle on the hydrodynamics performance of the flexible fin were analyzed. Parameter interval of the maximum thrust coefficient and the highest propulsive efficiency were gained. If the Strouhal number is low, high propulsive efficiency can be achieved at low αmax , and vice versa.

The influence of roll angles on unsteady aerodynamics in a canard-configured missile

During the initial stage of vertical launch,a missile may exhibit an uncertain roll angle(φ)and a high angle of attack(α).This study focuses on examining the impact of roll angle variations on the flow field and the unsteady aerodynamics of a canard-configured missile atα=75°.Simulations were performed using the validated k-ωSST turbulence model.The analysis encompasses the temporal development of vortices,the oscillatory characteristics of the lateral force,and the fluctuation of kinetic energy distribution within the framework of proper orthogonal decomposition(POD).The results indicate that the flow field surrounding the canardconfigured missile is characterized by inconsistent shedding cycles of Kármán-like and canard-separated vortices.A distinct transition zone is identified between these vortices,where vortex tearing and reconnection phenomena occur.With increasing roll angles from 0°to 45°,there is an observed shift in the dominant frequency of the lateral force from the higher frequency associated with Kármán-like vortex shedding to the lower frequency of canard vortex shedding.The shedding frequency of Kármán-like vortices corresponds to the harmonics of the canard vortex shedding frequency,indicative of a higher-order harmonic resonance.The frequency of the lateral force is observed to decrease with an increase in roll angle,except in configurations lacking distinct canard-separated vortices,which are characterized by a“+”shape.The POD analysis reveals that the majority of the fluctuation energy is concentrated in the oscillations and shedding of the canard-separated vortices,leading to pressure fluctuations that are primarily observed on the canard and the downstream region of the canard.

Experimental study on aerodynamic characteristics of a high-speed train on viaducts in turbulent crosswinds

In this study, experiments were carried out to investigate aerodynamic characteristics of a high-speed train on viaducts in turbulent crosswinds using a 1:25 scaled sectional model wind-tunnel testing. Pressure measurements of two typical sections, one train-head section and one train-body section, at the windward and leeward tracks were conducted under the smooth and turbulence flows with wind attack angles between-6° and 6°, and the corresponding aerodynamic force coefficients were also calculated using the integral method. The experimental results indicate that the track position affects the mean aerodynamic characteristics of the vehicle, especially for the train-body section. The fluctuating pressure coefficients at the leeward track are more significantly affected by the bridge interference compared to those at the windward track. The effect of turbulence on the train-head section is less than that on the train-body section. Additionally, the mean aerodynamic force coefficients are almost negatively correlated to wind attack angles, which is more prominent for vehicles at the leeward track. Moreover, the lateral force plays a critical role in determining the corresponding overturning moment, especially on the train-body section.

How Do Water Filled Traffic Barriers Shake a Suspension Bridge?

The present study stems from the realization that the general problem relating to the analysis of wind-induced vibrations in suspension bridges still requires significant attention.Sidewalk railings,overhaul tracks,and deflectors are known to largely affect such dynamics.Here,the influence of a row of water-filled traffic barriers on the response of a sample suspension bridge is investigated numerically.It is shown that the existence of water barriers causes flow separation and non-negligible vortices with respect to the condition with no water barriers.The vortex shedding frequency at the far end is around 41.30 Hz,relatively close to the real vibration frequency.It is also shown how different incoming angles of attack can change the flow field around the bridge cross-section and the vortex detachment frequency.

Flow-Induced Vibration of Four Cantilever Cylinders Arranged in A Square Configuration

Flow-induced vibration(FIV)of four separately mounted cantilever cylinders are experimentally investigated in a water flume.The four cylinders with top ends screwed vertically into a turntable platform are subjected to uniform flows with Reynolds number ranging from 3840 to 16520.A non-intrusive measurement with high-speed cameras is employed to simultaneously capture the time-varying in-line and cross-flow vibrations in the reduced velocity range of 3.0-12.9.Experimental results highlight the continuous adjustment of flow regime caused by the spatial-temporal alteration of cylinders.Consequently,the space-time varying flow interference contributes to the occurrence of multiple response frequencies.The transition from a dominant frequency to a broad-band response illustrates the enhancement of wake interference.The combination of wake flow interactions results in the irregular oscillation trajectories and the appearance of a response trough with the associated switching in vortex shedding mode.The dual-resonance phenomenon is observed in the four cylinders due to the complicated wake-structure interaction.The greatest mechanical energy possessed by the four cylinders in an in-line square arrangement is mainly resulted from the downstream cylinders,signifying the positive role of wake excitation in extracting hydrokinetic energy from ambient flow.

Thermal performance and entropy generation for nanofluid jet injection on a ribbed microchannel with oscillating heat flux: Investigation of the first and second laws of thermodynamics

In current numerical study,forced flow and heat transfer of water/NDG(Nitrogen-doped graphene)nanofluid in nanoparticles mass fractions(φ)of 0,2%and 4%at Reynolds numbers(Re)of 10,50,100 and 150 are simulated in steady states.Studied geometry is a two-dimensional microchannel under the influence of nanofluid jet injection.Temperature of inlet fluid equals with Tc=293 K and hot source of microchannel is under the influence of oscillating heat flux.Also,in this research,the effect of the variations of attack angle of triangular rib(15°,30°,45°and 60°)on laminar nanofluid flow behavior inside the studied rectangular geometry with the ratio of L/H=28 and nanofluid jet injection is investigated.Obtained results indicate that the increase of Reynolds number,nanoparticles mass fraction and attack angle of rib leads to the increase of pressure drop.By increasing fluid viscosity,momentum depreciation of fluid in collusion with microchannel surfaces enhances.Also,the increase of attack angle of rib at higher Reynolds numbers has a great effect on this coefficient.At low Reynolds numbers,due to slow motion of fluid,variations of attack angle of rib,especially in angles of 30°,45°and 60°are almost similar.By increasing fluid velocity,the effect of the variations of attack angle on pressure drop becomes significant and pressure drop figures act differently.In general,by using heat transfer enhancement methods in studied geometry,heat transfer increases almost 25%.

Stability analyses of the mass abrasive projectile high-speed penetrating into concrete target. Part Ⅱ: Structural stability analyses

The initial oblique and attacking angles as well as the asymmetrical nose abrasion may lead to bending or even fracture of a projectile,and the penetration efficiency decreases distinctly.The structural stability of a high-speed projectile non-normally penetrating into concrete and the parametric influences involved are analyzed with the mass abrasion taken into account.By considering the symmetrical or asymmetrical nose abrasion as well as the initial oblique and attacking angles,both the axial and the transverse drag forces acting on the projectile are derived.Based on the ideal elastic-plastic yield criterion,an approach is proposed for predicting the limit striking velocity（LSV）that is the highest velocity at which no yielding failure has occurred and the projectile can still maintain its integral structural stability.Furthermore,some particular penetration scenarios are separately discussed in detail.Based on the engineering model for the mass loss and nose-blunting of ogive-nose projectiles established in Part I of this study,the above approach is validated by several high-speed penetration tests.The analysis on parametric influences indicates that the LSV is reduced with an increase in the asymmetrical nose abrasion,thelength-diameter-ratio,and the concrete strength,as well as the oblique and attacking angles.Also,the LSV raises with an increase in the initial caliber-radius-head（CRH）and the dimensionless cartridge thickness of a projectile.