NH_(3)SO_(3)改性稀土尾矿催化剂NH_(3)-SCR脱硝活性及SO_(2)/H_(2)O耐受性能研究

采用球磨、微波焙烧方法制备了不同质量分数NH_(3)SO_(3)改性稀土尾矿NH_(3)-SCR脱硝催化剂。通过BET、SEM-EDS、XRD、NH_(3)-TPD、H_(2)-TPR分析了催化剂脱硝活性及SO_(2)/H_(2)O耐受性能。结果表明:NH_(3)SO_(3)改性使催化剂脱硝活性得到了显著提高,10%NH_(3)SO_(3)改性催化剂在300~350℃脱硝活性可达90%左右。SO_(2)/H_(2)O共同作用可将10%NH_(3)SO_(3)改性催化剂脱硝活性提高至97%,其促进作用保持了良好的稳定性,且具有可逆性。NH_(3)SO_(3)改性稀土尾矿后,催化剂比表面积、酸性位点及强度增加,表面活性物质分散度更高,弱化了尾矿矿物晶型,提高了催化剂吸附能力和氧化还原能力,从而提高催化脱硝活性,同时具备优良的SO_(2)/H_(2)O耐受性。

Dielectric barrier discharge plasma synthesis of Ag/γ-Al_(2)O_(3) catalysts for catalytic oxidation of CO

In this study,Ag/γ-Al_(2)O_(3)catalysts were synthesized by an Ar dielectric barrier discharge plasma using silver nitrate as the Ag source andγ-alumina(γ-Al_(2)O_(3))as the support.It is revealed that plasma can reduce silver ions to generate crystalline silver nanoparticles(Ag NPs)of good dispersion and uniformity on the alumina surface,leading to the formation of Ag/γ-Al_(2)O_(3)catalysts in a green manner without traditional chemical reductants.Ag/γ-Al_(2)O_(3)exhibited good catalytic activity and stability in CO oxidation reactions,and the activity increased with increase in the Ag content.For catalysts with more than 2 wt%Ag,100%CO conversion can be achieved at 300°C.The catalytic activity of the Ag/γ-Al_(2)O_(3)catalysts is also closely related to the size of theγ-alumina,where Ag/nano-γ-Al_(2)O_(3)catalysts demonstrate better performance than Ag/micro-γ-Al_(2)O_(3)catalysts with the same Ag content.In addition,the catalytic properties of plasma-generated Ag/nano-γ-Al_(2)O_(3)(Ag/γ-Al_(2)O_(3)-P)catalysts were compared with those of Ag/nano-γ-Al_(2)O_(3)catalysts prepared by the traditional calcination approach(Ag/γ-Al_(2)O_(3)-C),with the plasma-generated samples demonstrating better overall performance.This simple,rapid and green plasma process is considered to be applicable for the synthesis of diverse noble metal-based catalysts.

催化剂中Rh含量对NH_(3)及N_(2)O生成量影响研究

研究了不同Rh含量的三效催化剂对CO和NO_(x)的起燃性能,并对反应过程中副产物NH_(3)以及N_(2)O的生成规律进行研究。实验通过浸渍法制备得到不同Rh含量的Rh-Pd/Ce_(x)Zr_(1-x)O_(2)+La-Al_(2)O_(3)催化剂,采用一套专用多路固定床连续流动模拟气反应器对其性能进行评价。研究结果表明:不同Rh负载量表现出不同的N_(2)选择性,随着Rh用量的增加NO_(x)的转化性能提升。总体来看,低Rh用量的催化剂产生更多的N_(2)O和NH_(3)副产物,而随着Rh用量的增加其N_(2)选择性也增加。当温度达到400℃时,Rh用量≥0.141 g/L的催化剂基本没有N_(2)O生成,Rh用量≥0.283 g/L基本没有N_(2)O和NH_(3)生成。该研究对于优化三效催化剂中Rh配比以提升N_(2)选择性具有借鉴意义,并对于设计满足未来国Ⅶ排放标准的三效催化剂具有重要的指导意义。

α-Fe_(2)O_(3)/Cu_(2)O composites as catalysts for photoelectrocatalytic degradation of benzotriazoles

Given the difficulties of degrading benzotriazole(BTA),this study used a one-pot hydrothermal method to prepareα-Fe_(2)O_(3)/Cu_(2)O(FC)composites for photoelectrocatalytic(PEC)degradation of BTA.The characterization of FC structure showed that Cu_(2)O in cubic crystals was loaded with circular sheets of Fe_(2)O_(3).Owing to this structure,FC showed efficient PEC degradation of BTA when exposed to ultraviolet light.The experimental results demonstrated that FC efficiently degraded BTA.When the PEC degradation continued for 60 min,100%degradation of BTA was achieved because FC enhanced the photoelectron-hole separation and the separation and transfer of articulated carriers.High per-formance liquid chromatography-mass spectrometry showed that intermediates formed during the PEC degradation of BTA.Finally,various pathways for degradation of BTA were postulated.This FC-based PEC system provides a harmless and effective method for degradation of BTA.

金负载量对低温水煤气变换Auα-Fe_2O_3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au α Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件,考察了金负载量对催化剂性能的影响。采用BET、XRD、UV VIS、XRF、H2 TPR和O2 TPO等表征手段对催化剂的结构进行分析,并与其催化性能进行关联。结果表明,(1)采用10% H2 N2还原气将催化剂在150℃原位还原9h,其催化活性最高;(2)金的最佳负载量为8 00%,此时在催化剂制备过程中金的流失量较少,金粒子较小,也有利于抑制催化剂在反应过程中烧结;(3)TPR TPO结果表明,金的负载量为8 00%时,Au α Fe2O3催化剂具有较易被还原、不易被氧化的性质,从而显示出最高催化活性。(4)Au α Fe2O3催化剂中的金以单质金(Au0)形式存在;其高活性与Au0 Fe3O4间的协同作用有关。

Effect of Calcination Temperature on La-Modified Al2O3 Catalysts for Vapor Phase Hydrofluorination of Acetylene to Vinyl Fluoride

A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.

助剂对低温水煤气变换反应Au/α-Fe_2O_3催化剂性能的影响

采用共沉淀法制备了系列Au/α-Fe2O3-MOx(M=Zr、A l、Mg、Ca、Ba)催化剂,通过N2物理吸附、XRD、H2-TPR和CO2-TPD-MS等手段对催化剂的物化性质进行表征,考察了富氢下低温水煤气变换(WGS)反应中助剂对Au/α-Fe2O3催化剂性能的影响。结果表明,助剂ZrO2能有效提高Au/α-Fe2O3催化剂在富氢气氛下低温WGS反应活性和稳定性,反应温度150℃时CO转化率可达88.45%,且催化剂具有较高的稳定性。研究发现,添加ZrO2助剂能抑制载体晶粒的生长,降低载体晶粒度,提高催化剂的比表面积,改善催化剂的还原性能和表面酸碱度,从而提高催化剂的催化活性和稳定性。

不同方法掺杂Au对纳米α-Fe_2O_3气敏性能的影响

分别采用共沉淀法、浸渍法、紫外辐照法制备了掺杂不同Au含量的α-Fe2O3纳米粉体,并制作了旁热式厚膜型气敏元件.用XRD、TG-DTA和TEM技术对纳米晶的晶型、晶粒大小及形貌进行了表征.考察了掺杂方法、Au含量及焙烧温度对α-Fe2O3气敏性能的影响.结果表明,采用三种方法掺杂适量Au后,都使α-Fe2O3的气敏性有了显著提高,其中采用共沉淀法,在400℃焙烧的Au质量分数为1.5%的α-Fe2O3的气敏性最佳.

ZrO_2,Nb_2O_5助剂改性Au/α-Fe_2O_3催化剂的光谱研究

通过并流共沉淀方法,制备了一系列添加助剂ZrO2和Nb2O5的Au/α-Fe2O3催化剂,并用紫外-可见漫反射光谱,X射线光电子能谱,透射电镜和X射线荧光元素分析对其进行了表征。结果表明ZrO2和Nb2O5之间存在着较强的协同作用;两种助剂的同时添加促进了Au,ZrO2和Nb2O5在Au/α-Fe2O3催化剂表面的富集,有效地阻止了纳米微粒的团聚。经甲醇重整气氛下的催化性能评价,在200℃时,AuFZN的活性达到平衡转化率99.9%;经50h的稳定性测试,其稳定性远远高于未加助剂的Au/α-Fe2O3样品。这表明ZrO2和Nb2O5双助剂的添加有效地改善了Au/α-Fe2O3催化剂的性能。

Au/α-Fe_2O_3催化剂选择性氧化富氢气中CO的性能研究

通过并流共沉淀法制备了Au/α-Fe2O3催化剂,考察了金负载量及焙烧温度对Au/α-Fe2O3催化剂的物化结构及其选择性氧化富氢气体中CO催化性能的影响.研究结果表明,金负载量和焙烧温度对催化剂的性能均有较大影响,金负载量为1.5%(wt),低温焙烧(200～400℃)时制得的Au/α-Fe2O3催化剂对CO选择性氧化反应具有很好的催化活性和选择性,其中金负载量为1.5%(wt)、300℃焙烧的Au/α-Fe2O3催化剂,在40℃时对富氢气体中CO的转化率达到100%,选择性为 66%,该催化剂连续反应120h催化活性没有明显下降.XRD、BET和TEM分析结果表明,催化剂的性能与单质Au的粒径有关,粒径越小,催化活性越高.

Study on Au/Al_2O_3 catalysts for low-temperature CO oxidation in situ FT-IR

Au/Al2O3 catalyst was prepared by a modified anion impregnation method and investigated with respect to its initial activity and stability for low-temperature CO oxidation.The activity changes of the catalyst were examined after separate treatment in CO＋O2 or CO2 ＋O2 .Furthermore,in situ FT-IR studies were performed to investigate the species on the surface when CO or CO＋O2 or CO2 ＋O2 was selected separately as adsorption gas.The results showed that Au/Al2O3 catalyst exhibited very high initial activity,but the catalytic activity was found to decrease gradually during CO oxidation with time on stream.And also,the activity of the catalyst declined after treatment in CO＋O2 or CO2 ＋O2 .The formation and accumulation of carbonate-like species during CO oxidation or treatment in CO＋O2 or CO2 ＋O2 might be mainly responsible for the activity decrease,which was reversible.

PREPARATION,CHARACTERIZATION AND HYDROGENATION PROPERTY OF POLYMER-SUPPORTED Pd-Fe_2O_3 COMPOSITE CATALYSTS

A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon - carbon double bonds systems and reusability. Furthermore, XPS and IR spectra shouted that active component in the composite catalysts is atomic Pd(0). An addition of a small amount of Fe2O3 has a promotive action upon hydrogenation activity of the catalysts, which indicated that there are some strong interactions (electron transfer) between Pd(0) and Fe(Ⅲ) species. Based on these results, a possible catalytic hydrogenation mechanism was also suggested.

Monolithic Mesh-Type Fe-Pd/γ-Al₂O₃/Al Bifunctional Catalysts for Electro-Fenton Degradation of Rhodamine B

A novel Fe-Pd bifunctional catalyst supported on mesh-type γ-Al2O3/Al was prepared and applied in the degradation of Rhodamine B (RhB). The monolithic mesh-type Fe-Pd/γ-Al2O3/Al bifunctional catalyst could be separated from the solution directly and could synthesize H2O2 in situ. The characterization results showed that Fe could improve the dispersion of Pd0, and the electronic interactions between Pd and Fe could increase the Pd0 contents on the catalyst, which increased the productivity of H2O2. Furthermore, DFT calculations proved that the addition of Fe could inhibit the dissociation of O2 and promote the nondissociative hydrogenation of O2 on the surface of Fe-Pd/γ-Al2O3/Al, which resulted in the increasement of H2O2 selectivity. Finally, the in-situ synthesized H2O2 by Pd was furtherly decomposed in situ by Fe to generateOH radicals to degrade organic pollutants. Therefore, Fe-Pd/ γ-Al2O3/Al catalysts exhibited excellent catalytic activity in the in-situ synthesis of H2O2 and the degradation of RhB due to the synergistic effects between Pd and Fe on the catalyst. It provided a new idea for the design of bifunctional electro-Fenton catalysts. Ten cycles of experiments showed that the catalytic activity of Fe-Pd/γ-Al2O3/Al catalyst could be maintained for a long time.

Enhanced CO oxidation over potassium-promoted Pt/Al_2O_3 catalysts:Kinetic and infrared spectroscopic study

A series of K-promoted Pt/Al2O3 catalysts were tested for CO oxidation. It was found that the addition of K significantly enhanced the activity. A detailed kinetic study showed that the activation energies of the K-containing catalysts were lower than those of the K-free ones, particularly for catalysts with high Pt contents （51.6 k）/mol for 0.42K-2.0Pt/Al2O3 and 6：3.6 kJ/mol for 2.0Pt/Al2O3 ）. The CO reaction orders were higher for the K-containing catalysts （about -0.2） than for the K-free ones （about -0.5）, with the former having much lower equilibrium constants for CO adsorption than the latter. In situ Fourier-transform infrared spectroscopy showed that surface CO desorption from the 0.42K-2.0Pt/Al2O3 catalyst was easier than from 2.0Pt/Al2O3. The promoting effect of K was therefore caused by weakening of the interactions between CO and surface Pt atoms. This decreased coverage of the catalyst with CO and facilitated competitive O2 chemisorption on the Pt surface, and significantly lowered the reaction barrier between chemisorbed CO and O2 species.

Methanation of syngas over coral reef-like Ni/Al_2O_3 catalysts

Coral reef-like Ni/Al2O3 catalysts were prepared by co-precipitation of nickel acetate and aluminium nitrate with sodium carbonate aqueous solution in the medium of ethylene glycolye.Methanation of syngas was carried out over coral reef-like Ni/Al2O3 catalysts in a continuous flow type fixed-bed reactor.The structure and properties of the fresh and used catalysts were studied by SEM,N2 adsorption-desorption,XRD,H2-TPR,O2-TPO,TG and ICP-AES techniques.The results showed that the coral reef-like Ni/Al2O3 catalysts exhibited better activity than the conventional Ni/Al2O3-H2O catalysts.The activities of coral reef-like catalysts were in the order of Ni/Al2O3-673Ni/Al2O3-573Ni/Al2O3- 473Ni/Al2O3-773.Ni/Al2O3-673-EG catalyst showed not only good activity and improved stability but also superior resistance to carbon deposition,sintering,and Ni loss.Under the reaction conditions of CO/H2（molar ratio）=1：3,593 K,atmospheric pressure and a GHSV of 2500 h-1,CH4 selectivity was 84.7%,and the CO conversion reached 98.2%.

2D/2D step-schemeα-Fe2O3/Bi2WO6 photocatalyst with efficient charge transfer for enhanced photo-Fenton catalytic activity

Although the traditional Fenton reaction is considered an effective strategy for solving problems caused by environmental pollution,construction of an efficient photocatalytic system by coordinating the Fenton reaction is challenging.In this study,2D/2D step-schemeα-Fe2O3/Bi2WO6(FO/BWO)heterostructure photo-Fenton catalysts were successfully fabricated by a facile hydrothermal method.The as-prepared materials were characterized by XRD,FT-IR,TEM,XPS,UV-vis DRS,PL,I-t,EIS,and BET analyses.Under visible light irradiation,FO/BWO exhibited remarkably high and stable photo-Fenton catalytic activity for the degradation of methyl blue(MB)at low concentrations of H2O2.It was noted that FO/BWO(0.5)displayed a significantly enhanced photo-Fenton catalytic activity,which was 11.06 and 3.29 times those of FO nanosheets and BWO nanosheets,respectively.The notably improved photo-Fenton catalytic activity of FO/BWO was mainly due to the combination of H2O2 and FO under light illumination and the presence of the 2D/2D S-scheme heterostructure,with the large contact surface,abundant active sites,and efficient separation rate of photogenerated carriers playing contributory roles.Additionally,a possible catalytic mechanism for the FO/BWO composite was preliminarily proposed via active species trapping experiments.In summary,this study provided new insights into the synthesis of an effectively heterogeneous 2D/2D S-scheme photo-Fenton catalyst for degradation of organic pollutants in wastewater.

Investigation of the characteristics and deactivation of catalytic active center of Cr-Al_2O_3 catalysts for isobutane dehydrogenation

Deactivation mechanism of Cr-Al2O3catalyst and the interaction of Cr-A1 in the dehydrogenation of isobutane, as well as the nature of the catalytic active center, were studied using XRD, SEM, XPS, H2-TPR, isobutane-TPR and TPO techniques. The results revealed that the deactivation of Cr-Al2O3 catalyst was mainly caused by carbon deposition on its surface. The Cr3＋ ion could not be reduced by hydrogen but could be reduced to Cr2＋ by hydrocarbons and monoxide carbon. The active center for isobutane dehydrogenation could be Cr2＋/Cr3＋ produced from Cr6＋ by the on line reduction of hydrocarbon and carbon monoxide. The binding energy of Al3＋ was strongly affected by the state of chromium cations in the catalysts.

Ethanol steam reforming over Ni-Cu/Al_2O_3-M_yO_z (M = Si, La, Mg,and Zn) catalysts

Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction. The effects of Cu content, support species involving Al2O3-SIO2, Al2O3-MgO, Al2O3-ZnO, and Al2O3-La2O3, on the catalytic performance were studied. Characterizations by TPR, XRD, NH3-TPD, XPS, and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30Ni5Cu/Al2O3-ZnO have much higher H2 selectivity than 30Ni5Cu/Al2O3-SiO2, as well as good coke resistance. H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450 ℃ and increased to 94.0% at 600℃, whereas for 30Ni5Cu/Al2O3-ZnO catalyst, the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600℃. TheseAl2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions.

Effect of Al_2O_3 Binder on the Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.