Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading condition.This characteristic results in a diverse range of flow curves that vary with a deformation condition.This study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data augmentation.The developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)architecture.The proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset size.The model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading directions.The GAN-aided GRU results were superior to those of previous ML models and constitutive equations.The superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for extrapolation.As a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

Image segmentation of exfoliated two-dimensional materials by generative adversarial network-based data augmentation

Mechanically cleaved two-dimensional materials are random in size and thickness.Recognizing atomically thin flakes by human experts is inefficient and unsuitable for scalable production.Deep learning algorithms have been adopted as an alternative,nevertheless a major challenge is a lack of sufficient actual training images.Here we report the generation of synthetic two-dimensional materials images using StyleGAN3 to complement the dataset.DeepLabv3Plus network is trained with the synthetic images which reduces overfitting and improves recognition accuracy to over 90%.A semi-supervisory technique for labeling images is introduced to reduce manual efforts.The sharper edges recognized by this method facilitate material stacking with precise edge alignment,which benefits exploring novel properties of layered-material devices that crucially depend on the interlayer twist-angle.This feasible and efficient method allows for the rapid and high-quality manufacturing of atomically thin materials and devices.

Defect Detection Model Using Time Series Data Augmentation and Transformation

Time-series data provide important information in many fields,and their processing and analysis have been the focus of much research.However,detecting anomalies is very difficult due to data imbalance,temporal dependence,and noise.Therefore,methodologies for data augmentation and conversion of time series data into images for analysis have been studied.This paper proposes a fault detection model that uses time series data augmentation and transformation to address the problems of data imbalance,temporal dependence,and robustness to noise.The method of data augmentation is set as the addition of noise.It involves adding Gaussian noise,with the noise level set to 0.002,to maximize the generalization performance of the model.In addition,we use the Markov Transition Field(MTF)method to effectively visualize the dynamic transitions of the data while converting the time series data into images.It enables the identification of patterns in time series data and assists in capturing the sequential dependencies of the data.For anomaly detection,the PatchCore model is applied to show excellent performance,and the detected anomaly areas are represented as heat maps.It allows for the detection of anomalies,and by applying an anomaly map to the original image,it is possible to capture the areas where anomalies occur.The performance evaluation shows that both F1-score and Accuracy are high when time series data is converted to images.Additionally,when processed as images rather than as time series data,there was a significant reduction in both the size of the data and the training time.The proposed method can provide an important springboard for research in the field of anomaly detection using time series data.Besides,it helps solve problems such as analyzing complex patterns in data lightweight.

Perpendicular-Cutdepth:Perpendicular Direction Depth Cutting Data Augmentation Method

Depth estimation is an important task in computer vision.Collecting data at scale for monocular depth estimation is challenging,as this task requires simultaneously capturing RGB images and depth information.Therefore,data augmentation is crucial for this task.Existing data augmentationmethods often employ pixel-wise transformations,whichmay inadvertently disrupt edge features.In this paper,we propose a data augmentationmethod formonocular depth estimation,which we refer to as the Perpendicular-Cutdepth method.This method involves cutting realworld depth maps along perpendicular directions and pasting them onto input images,thereby diversifying the data without compromising edge features.To validate the effectiveness of the algorithm,we compared it with existing convolutional neural network(CNN)against the current mainstream data augmentation algorithms.Additionally,to verify the algorithm’s applicability to Transformer networks,we designed an encoder-decoder network structure based on Transformer to assess the generalization of our proposed algorithm.Experimental results demonstrate that,in the field of monocular depth estimation,our proposed method,Perpendicular-Cutdepth,outperforms traditional data augmentationmethods.On the indoor dataset NYU,our method increases accuracy from0.900 to 0.907 and reduces the error rate from0.357 to 0.351.On the outdoor dataset KITTI,our method improves accuracy from 0.9638 to 0.9642 and decreases the error rate from 0.060 to 0.0598.

Change in self-image pressure level before and after autologous fat breast augmentation and its effect on social adaptability

BACKGROUND There is an increasingly strong demand for appearance and physical beauty in social life,marriage,and other aspects with the development of society and the improvement of material living standards.An increasing number of people have improved their appearance and physical shape through aesthetic plastic surgery.The female breast plays a significant role in physical beauty,and droopy or atrophied breasts can frequently lead to psychological inferiority and lack of confidence in women.This,in turn,can affect their mental health and quality of life.AIM To analyze preoperative and postoperative self-image pressure-level changes of autologous fat breast augmentation patients and their impact on social adaptability.METHODS We selected 160 patients who underwent autologous fat breast augmentation at the First Affiliated Hospital of Xinxiang Medical University from January 2020 to December 2022 using random sampling method.The general information,selfimage pressure level,and social adaptability of the patients were investigated using a basic information survey,body image self-assessment scale,and social adaptability scale.The self-image pressure-level changes and their effects on the social adaptability of patients before and after autologous fat breast augmentation were analyzed.RESULTS We collected 142 valid questionnaires.The single-factor analysis results showed no statistically significant difference in the self-image pressure level and social adaptability score of patients with different ages,marital status,and monthly income.However,there were significant differences in social adaptability among patients with different education levels and employment statuses.The correlation analysis results revealed a significant correlation between the self-image pressure level and social adaptability score before and after surgery.Multiple factors analysis results showed that the degree of concern caused by appearance in selfimage pressure,the degree of possible behavioral intervention,the related distress caused by body image,and the influence of body image on social life influenced the social adaptability of autologous fat breast augmentation patients.CONCLUSION The self-image pressure on autologous fat breast augmentation patients is inversely proportional to their social adaptability.

Transcranial direct current stimulation as early augmentation in adolescent obsessive compulsive disorder:A pilot proof-of-concept randomized control trial

BACKGROUND Transcranial direct current stimulation(tDCS)is proven to be safe in treating various neurological conditions in children and adolescents.It is also an effective method in the treatment of OCD in adults.AIM To assess the safety and efficacy of tDCS as an add-on therapy in drug-naive adolescents with OCD.METHODS We studied drug-naïve adolescents with OCD,using a Children’s Yale-Brown obsessive-compulsive scale(CY-BOCS)scale to assess their condition.Both active and sham groups were given fluoxetine,and we applied cathode and anode over the supplementary motor area and deltoid for 20 min in 10 sessions.Reassessment occurred at 2,6,and 12 wk using CY-BOCS.RESULTS Eighteen adolescents completed the study(10-active,8-sham group).CY-BOCS scores from baseline to 12 wk reduced significantly in both groups but change at baseline to 2 wk was significant in the active group only.The mean change at 2 wk was more in the active group(11.8±7.77 vs 5.25±2.22,P=0.056).Adverse effects between the groups were comparable.CONCLUSION tDCS is safe and well tolerated for the treatment of OCD in adolescents.However,there is a need for further studies with a larger sample population to confirm the effectiveness of tDCS as early augmentation in OCD in this population.

Amisulpride augmentation therapy improves cognitive performance and psychopathology in clozapine‑resistant treatment‑refractory schizophrenia:a 12‑week randomized,double‑blind,placebo‑controlled trial

Background:Although clozapine is an effective option for treatment-resistant schizophrenia(TRS),there are still 1/3 to 1/2 of TRS patients who do not respond to clozapine.The main purpose of this randomized,double-blind,placebocontrolled trial was to explore the amisulpride augmentation efficacy on the psychopathological symptoms and cognitive function of clozapine-resistant treatment-refractory schizophrenia(CTRS)patients.Methods:A total of 80 patients were recruited and randomly assigned to receive initial clozapine plus amisulpride(amisulpride group)or clozapine plus placebo(placebo group).Positive and Negative Syndrome Scale(PANSS),Scale for the Assessment of Negative Symptoms(SANS),Clinical Global Impression(CGI)scale scores,Repeatable Battery for the Assessment of Neuropsychological Status(RBANS),Treatment Emergent Symptom Scale(TESS),laboratory measurements,and electrocardiograms(ECG)were performed at baseline,week 6,and week 12.Results:Compared with the placebo group,amisulpride group had a lower PANSS total score,positive subscore,and general psychopathology subscore at week 6 and week 12(PBonferroni<0.01).Furthermore,compared with the placebo group,the amisulpride group showed an improved RBANS language score at week 12(PBonferroni<0.001).Amisulpride group had a higher treatment response rate(P=0.04),lower scores of CGI severity and CGI efficacy at week 6 and week 12 than placebo group(PBonferroni<0.05).There were no differences between the groups in body mass index(BMI),corrected QT(QTc)intervals,and laboratory measurements.This study demonstrates that amisulpride augmentation therapy can safely improve the psychiatric symptoms and cognitive performance of CTRS patients.

OffSig-SinGAN: A Deep Learning-Based Image Augmentation Model for Offline Signature Verification

Offline signature verification(OfSV)is essential in preventing the falsification of documents.Deep learning(DL)based OfSVs require a high number of signature images to attain acceptable performance.However,a limited number of signature samples are available to train these models in a real-world scenario.Several researchers have proposed models to augment new signature images by applying various transformations.Others,on the other hand,have used human neuromotor and cognitive-inspired augmentation models to address the demand for more signature samples.Hence,augmenting a sufficient number of signatures with variations is still a challenging task.This study proposed OffSig-SinGAN:a deep learning-based image augmentation model to address the limited number of signatures problem on offline signature verification.The proposed model is capable of augmenting better quality signatures with diversity from a single signature image only.It is empirically evaluated on widely used public datasets;GPDSsyntheticSignature.The quality of augmented signature images is assessed using four metrics like pixel-by-pixel difference,peak signal-to-noise ratio(PSNR),structural similarity index measure(SSIM),and frechet inception distance(FID).Furthermore,various experiments were organised to evaluate the proposed image augmentation model’s performance on selected DL-based OfSV systems and to prove whether it helped to improve the verification accuracy rate.Experiment results showed that the proposed augmentation model performed better on the GPDSsyntheticSignature dataset than other augmentation methods.The improved verification accuracy rate of the selected DL-based OfSV system proved the effectiveness of the proposed augmentation model.

Brain Tumor Identification Using Data Augmentation and Transfer Learning Approach

A brain tumor is a lethal neurological disease that affects the average performance of the brain and can be fatal.In India,around 15 million cases are diagnosed yearly.To mitigate the seriousness of the tumor it is essential to diagnose at the beginning.Notwithstanding,the manual evaluation process utilizing Magnetic Resonance Imaging(MRI)causes a few worries,remarkably inefficient and inaccurate brain tumor diagnoses.Similarly,the examination process of brain tumors is intricate as they display high unbalance in nature like shape,size,appearance,and location.Therefore,a precise and expeditious prognosis of brain tumors is essential for implementing the of an implicit treatment.Several computer models adapted to diagnose the tumor,but the accuracy of the model needs to be tested.Considering all the above mentioned things,this work aims to identify the best classification system by considering the prediction accuracy out of Alex-Net,ResNet 50,and Inception V3.Data augmentation is performed on the database and fed into the three convolutions neural network(CNN)models.A comparison line is drawn between the three models based on accuracy and performance.An accuracy of 96.2%is obtained for AlexNet with augmentation and performed better than ResNet 50 and Inception V3 for the 120th epoch.With the suggested model with higher accuracy,it is highly reliable if brain tumors are diagnosed with available datasets.

Operational guidance for aeration and flow augmentation for the Chicago Area Waterway System—A case study

The Chicago Area Waterway System(CAWS)is a 133.9 km branching network of navigable waterways controlled by hydraulic structures,in which the majority of the flow is treated wastewater effluent and there are periods of substantial combined sewer overflows.The CAWS comprises a network of effluent dominated streams.More stringent dissolved oxygen(DO)standards and a reduced flow augmentation allowance have been recently applied to the CAWS.Therefore,a carefully calibrated and verified one-dimensional flow and water quality model was applied to the CAWS to determine emission-based real-time control guidelines for the operation of flow augmentation and aeration stations.The goal of these guidelines was to attain DO standards at least 95%of the time.The“optimal”guidelines were tested for representative normal,dry,and wet years.The finally proposed guidelines were found in the simulations to attain the 95%target for nearly all locations in the CAWS for the three test years.The developed operational guidelines have been applied since 2018 and have shown improved attainment of the DO standards throughout the CAWS while at the same time achieving similar energy use at the aeration stations on the Calumet River system,greatly lowered energy use on the Chicago River system,and greatly lowered discretionary diversion from Lake Michigan,meeting the recently enacted lower amount of allowed annual discretionary diversion.This case study indicates that emission-based real-time control developed from a well calibrated model holds potential to help many receiving water bodies achieve high attainment of water quality standards.

Rolling bearing fault diagnostics based on improved data augmentation and ConvNet

Convolutional neural networks(CNNs)are well suited to bearing fault classification due to their ability to learn discriminative spectro-temporal patterns.However,gathering sufficient cases of faulty conditions in real-world engineering scenarios to train an intelligent diagnosis system is challenging.This paper proposes a fault diagnosis method combining several augmentation schemes to alleviate the problem of limited fault data.We begin by identifying relevant parameters that influence the construction of a spectrogram.We leverage the uncertainty principle in processing time-frequency domain signals,making it impossible to simultaneously achieve good time and frequency resolutions.A key determinant of this phenomenon is the window function's choice and length used in implementing the shorttime Fourier transform.The Gaussian,Kaiser,and rectangular windows are selected in the experimentation due to their diverse characteristics.The overlap parameter's size also influences the outcome and resolution of the spectrogram.A 50%overlap is used in the original data transformation,and±25%is used in implementing an effective augmentation policy to which two-stage regular CNN can be applied to achieve improved performance.The best model reaches an accuracy of 99.98%and a cross-domain accuracy of 92.54%.When combined with data augmentation,the proposed model yields cutting-edge results.

Data Augmentation Using Contour Image for Convolutional Neural Network

With the development of artificial intelligence-related technologies such as deep learning,various organizations,including the government,are making various efforts to generate and manage big data for use in artificial intelligence.However,it is difficult to acquire big data due to various social problems and restrictions such as personal information leakage.There are many problems in introducing technology in fields that do not have enough training data necessary to apply deep learning technology.Therefore,this study proposes a mixed contour data augmentation technique,which is a data augmentation technique using contour images,to solve a problem caused by a lack of data.ResNet,a famous convolutional neural network(CNN)architecture,and CIFAR-10,a benchmark data set,are used for experimental performance evaluation to prove the superiority of the proposed method.And to prove that high performance improvement can be achieved even with a small training dataset,the ratio of the training dataset was divided into 70%,50%,and 30%for comparative analysis.As a result of applying the mixed contour data augmentation technique,it was possible to achieve a classification accuracy improvement of up to 4.64%and high accuracy even with a small amount of data set.In addition,it is expected that the mixed contour data augmentation technique can be applied in various fields by proving the excellence of the proposed data augmentation technique using benchmark datasets.

Multi-Task Learning Model with Data Augmentation for Arabic Aspect-Based Sentiment Analysis

Aspect-based sentiment analysis(ABSA)is a fine-grained process.Its fundamental subtasks are aspect termextraction(ATE)and aspect polarity classification(APC),and these subtasks are dependent and closely related.However,most existing works on Arabic ABSA content separately address them,assume that aspect terms are preidentified,or use a pipeline model.Pipeline solutions design different models for each task,and the output from the ATE model is used as the input to the APC model,which may result in error propagation among different steps because APC is affected by ATE error.These methods are impractical for real-world scenarios where the ATE task is the base task for APC,and its result impacts the accuracy of APC.Thus,in this study,we focused on a multi-task learning model for Arabic ATE and APC in which the model is jointly trained on two subtasks simultaneously in a singlemodel.This paper integrates themulti-task model,namely Local Cotext Foucse-Aspect Term Extraction and Polarity classification(LCF-ATEPC)and Arabic Bidirectional Encoder Representation from Transformers(AraBERT)as a shred layer for Arabic contextual text representation.The LCF-ATEPC model is based on a multi-head selfattention and local context focus mechanism(LCF)to capture the interactive information between an aspect and its context.Moreover,data augmentation techniques are proposed based on state-of-the-art augmentation techniques(word embedding substitution with constraints and contextual embedding(AraBERT))to increase the diversity of the training dataset.This paper examined the effect of data augmentation on the multi-task model for Arabic ABSA.Extensive experiments were conducted on the original and combined datasets(merging the original and augmented datasets).Experimental results demonstrate that the proposed Multi-task model outperformed existing APC techniques.Superior results were obtained by AraBERT and LCF-ATEPC with fusion layer(AR-LCF-ATEPC-Fusion)and the proposed data augmentation word embedding-based method(FastText)on the combined dataset.

Data Augmentation and Random Multi-Model Deep Learning for Data Classification

In the machine learning(ML)paradigm,data augmentation serves as a regularization approach for creating ML models.The increase in the diversification of training samples increases the generalization capabilities,which enhances the prediction performance of classifiers when tested on unseen examples.Deep learning(DL)models have a lot of parameters,and they frequently overfit.Effectively,to avoid overfitting,data plays a major role to augment the latest improvements in DL.Nevertheless,reliable data collection is a major limiting factor.Frequently,this problem is undertaken by combining augmentation of data,transfer learning,dropout,and methods of normalization in batches.In this paper,we introduce the application of data augmentation in the field of image classification using Random Multi-model Deep Learning(RMDL)which uses the association approaches of multi-DL to yield random models for classification.We present a methodology for using Generative Adversarial Networks(GANs)to generate images for data augmenting.Through experiments,we discover that samples generated by GANs when fed into RMDL improve both accuracy and model efficiency.Experimenting across both MNIST and CIAFAR-10 datasets show that,error rate with proposed approach has been decreased with different random models.

Multilevel Augmentation for Identifying Thin Vessels in Diabetic Retinopathy Using UNET Model

Diabetic Retinopathy is a disease,which happens due to abnormal growth of blood vessels that causes spots on the vision and vision loss.Various techniques are applied to identify the disease in the early stage with different methods and parameters.Machine Learning(ML)techniques are used for analyz-ing the images andfinding out the location of the disease.The restriction of the ML is a dataset size,which is used for model evaluation.This problem has been overcome by using an augmentation method by generating larger datasets with multidimensional features.Existing models are using only one augmentation tech-nique,which produces limited features of dataset and also lacks in the association of those data during DR detection,so multilevel augmentation is proposed for analysis.The proposed method performs in two phases namely integrated aug-mentation model and dataset correlation(i.e.relationships).It eliminates overfit-ting problem by considering relevant dataset.This method is used for solving the Diabetic Retinopathy problem with a thin vessel identification using the UNET model.UNET based image segmentation achieves 98.3%accuracy when com-pared to RV-GAN and different UNET models with high detection rate.

Music Genre Classification Using DenseNet and Data Augmentation

It can be said that the automatic classification of musical genres plays a very important role in the current digital technology world in which the creation,distribution,and enjoyment of musical works have undergone huge changes.As the number ofmusic products increases daily and themusic genres are extremely rich,storing,classifying,and searching these works manually becomes difficult,if not impossible.Automatic classification ofmusical genres will contribute to making this possible.The research presented in this paper proposes an appropriate deep learning model along with an effective data augmentation method to achieve high classification accuracy for music genre classification using Small Free Music Archive(FMA)data set.For Small FMA,it is more efficient to augment the data by generating an echo rather than pitch shifting.The research results show that the DenseNet121 model and data augmentation methods,such as noise addition and echo generation,have a classification accuracy of 98.97%for the Small FMA data set,while this data set lowered the sampling frequency to 16000 Hz.The classification accuracy of this study outperforms that of the majority of the previous results on the same Small FMA data set.

Feature-Based Augmentation in Sarcasm Detection Using Reverse Generative Adversarial Network

Sarcasm detection in text data is an increasingly vital area of research due to the prevalence of sarcastic content in online communication.This study addresses challenges associated with small datasets and class imbalances in sarcasm detection by employing comprehensive data pre-processing and Generative Adversial Network(GAN)based augmentation on diverse datasets,including iSarcasm,SemEval-18,and Ghosh.This research offers a novel pipeline for augmenting sarcasm data with Reverse Generative Adversarial Network(RGAN).The proposed RGAN method works by inverting labels between original and synthetic data during the training process.This inversion of labels provides feedback to the generator for generating high-quality data closely resembling the original distribution.Notably,the proposed RGAN model exhibits performance on par with standard GAN,showcasing its robust efficacy in augmenting text data.The exploration of various datasets highlights the nuanced impact of augmentation on model performance,with cautionary insights into maintaining a delicate balance between synthetic and original data.The methodological framework encompasses comprehensive data pre-processing and GAN-based augmentation,with a meticulous comparison against Natural Language Processing Augmentation(NLPAug)as an alternative augmentation technique.Overall,the F1-score of our proposed technique outperforms that of the synonym replacement augmentation technique using NLPAug.The increase in F1-score in experiments using RGAN ranged from 0.066%to 1.054%,and the use of standard GAN resulted in a 2.88%increase in F1-score.The proposed RGAN model outperformed the NLPAug method and demonstrated comparable performance to standard GAN,emphasizing its efficacy in text data augmentation.

Tight Sandstone Image Augmentation for Image Identification Using Deep Learning

Intelligent identification of sandstone slice images using deep learning technology is the development trend of mineral identification,and accurate mineral particle segmentation is the most critical step for intelligent identification.A typical identification model requires many training samples to learn as many distinguishable features as possible.However,limited by the difficulty of data acquisition,the high cost of labeling,and privacy protection,this has led to a sparse sample number and cannot meet the training requirements of deep learning image identification models.In order to increase the number of samples and improve the training effect of deep learning models,this paper proposes a tight sandstone image data augmentation method by combining the advantages of the data deformation method and the data oversampling method in the Putaohua reservoir in the Sanzhao Sag of the Songliao Basin as the target area.First,the Style Generative Adversarial Network(StyleGAN)is improved to generate high-resolution tight sandstone images to improve data diversity.Second,we improve the Automatic Data Augmentation(AutoAugment)algorithm to search for the optimal augmentation strategy to expand the data scale.Finally,we design comparison experiments to demonstrate that this method has obvious advantages in generating image quality and improving the identification effect of deep learning models in real application scenarios.

Breast Cancer Detection Using Breastnet-18 Augmentation with Fine Tuned Vgg-16

Women from middle age to old age are mostly screened positive for Breast cancer which leads to death.Times over the past decades,the overall sur-vival rate in breast cancer has improved due to advancements in early-stage diag-nosis and tailored therapy.Today all hospital brings high awareness and early detection technologies for breast cancer.This increases the survival rate of women.Though traditional breast cancer treatment takes so long,early cancer techniques require an automation system.This research provides a new methodol-ogy for classifying breast cancer using ultrasound pictures that use deep learning and the combination of the best characteristics.Initially,after successful learning of Convolutional Neural Network(CNN)algorithms,data augmentation is used to enhance the representation of the feature dataset.Then it uses BreastNet18 withfine-tuned VGG-16 model for pre-training the augmented dataset.For feature classification,Entropy controlled Whale Optimization Algorithm(EWOA)is used.The features that have been optimized using the EWOA were utilized to fuse and optimize the data.To identify the breast cancer pictures,training classifiers are used.By using the novel probability-based serial technique,the best-chosen characteristics are fused and categorized by machine learning techniques.The main objective behind the research is to increase tumor prediction accuracy for saving human life.The testing was performed using a dataset of enhanced Breast Ultrasound Images(BUSI).The proposed method improves the accuracy com-pared with the existing methods.

Attentive Neighborhood Feature Augmentation for Semi-supervised Learning

Recent state-of-the-art semi-supervised learning(SSL)methods usually use data augmentations as core components.Such methods,however,are limited to simple transformations such as the augmentations under the instance’s naive representations or the augmentations under the instance’s semantic representations.To tackle this problem,we offer a unique insight into data augmentations and propose a novel data-augmentation-based semi-supervised learning method,called Attentive Neighborhood Feature Aug-mentation(ANFA).The motivation of our method lies in the observation that the relationship between the given feature and its neighborhood may contribute to constructing more reliable transformations for the data,and further facilitating the classifier to distinguish the ambiguous features from the low-dense regions.Specially,we first project the labeled and unlabeled data points into an embedding space and then construct a neighbor graph that serves as a similarity measure based on the similar representations in the embedding space.Then,we employ an attention mechanism to transform the target features into augmented ones based on the neighbor graph.Finally,we formulate a novel semi-supervised loss by encouraging the predictions of the interpolations of augmented features to be consistent with the corresponding interpolations of the predictions of the target features.We carried out exper-iments on SVHN and CIFAR-10 benchmark datasets and the experimental results demonstrate that our method outperforms the state-of-the-art methods when the number of labeled examples is limited.