A matrix metalloproteinase-responsive hydrogel system controls angiogenic peptide release for repair of cerebral ischemia/reperfusion injury

Vascular endothelial growth factor and its mimic peptide KLTWQELYQLKYKGI(QK)are widely used as the most potent angiogenic factors for the treatment of multiple ischemic diseases.However,conventional topical drug delivery often results in a burst release of the drug,leading to transient retention(inefficacy)and undesirable diffusion(toxicity)in vivo.Therefore,a drug delivery system that responds to changes in the microenvironment of tissue regeneration and controls vascular endothelial growth factor release is crucial to improve the treatment of ischemic stroke.Matrix metalloproteinase-2(MMP-2)is gradually upregulated after cerebral ischemia.Herein,vascular endothelial growth factor mimic peptide QK was self-assembled with MMP-2-cleaved peptide PLGLAG(TIMP)and customizable peptide amphiphilic(PA)molecules to construct nanofiber hydrogel PA-TIMP-QK.PA-TIMP-QK was found to control the delivery of QK by MMP-2 upregulation after cerebral ischemia/reperfusion and had a similar biological activity with vascular endothelial growth factor in vitro.The results indicated that PA-TIMP-QK promoted neuronal survival,restored local blood circulation,reduced blood-brain barrier permeability,and restored motor function.These findings suggest that the self-assembling nanofiber hydrogel PA-TIMP-QK may provide an intelligent drug delivery system that responds to the microenvironment and promotes regeneration and repair after cerebral ischemia/reperfusion injury.

Structural Controls Analysis and Its Correlation with Geothermal Occurrence at Barrier Volcanic Complex (BVC), Turkana, Kenya

Geothermal is a clean energy source that is freely available in the subsurface. The exploitation of this vital resource needs intensive exploration in order to identify and quantify its occurrence. The three parameters considered when assessing the viability of a geothermal system include;heat source, fractures and fluids. Geological structures are important in transportation of fluids to and from the heat source aiding in recharge of the geothermal system and enhancing productivity. Remote sensing method was applied in mapping the structures at Barrier Volcanic Complex (BVC) by using hill shading technique which utilized four illumination angles of the sun (azimuth) i.e. 45°, 90°, 150°, and 315°, constant elevation of 45° and exaggeration of 10. The data used was Shuttle Radar Topographic Mission (SRTM) Satellite Imagery. ArcGIS Software was used for lineaments delineation and density mapping, PCI Geomatica was used to generate major faults, while Georose and Rockworks 17 were used to generate the rose diagrams. Geological structural analysis was done by delineating lineaments, determining the density distribution of lineaments and finally determining the structural trends of lineaments. The generated major faults in the area and the location of the occurrence of surface manifestations were compared with the generated lineaments. A total of 260 lineaments were generated whereby at 45° there was a total of 60 lineaments, at 90° 95 lineaments, at 150° 61 lineaments, and at 315° 44 lineaments. The results of structural analysis in the area as shown by the rose diagrams indicate an NNE-SSW and N-S trending of structures. In conclusion, the study area is highly fractured as indicated by the presence of numerous lineaments. These lineaments provide good recharge to the geothermal system and enhance the geothermal reservoir in the area.

Effects of dust controls on respirable coal mine dust composition and particle sizes:case studies on auxiliary scrubbers and canopy air curtain

Control of dust in underground coal mines is critical for mitigating both safety and health hazards.For decades,the National Institute of Occupational Safety and Health(NIOSH)has led research to evaluate the effectiveness of various dust control technologies in coal mines.Recent studies have included the evaluation of auxiliary scrubbers to reduce respirable dust downstream of active mining and the use of canopy air curtains(CACs)to reduce respirable dust in key operator positions.While detailed dust characterization was not a focus of such studies,this is a growing area of interest.Using preserved filter samples from three previous NIOSH studies,the current work aims to explore the effect of two different scrubbers(one wet and one dry)and a roof bolter CAC on respirable dust composition and particle size distribution.For this,the preserved filter samples were analyzed by thermogravimetric analysis and/or scanning electron microscopy with energy dispersive X-ray.Results indicate that dust composition was not appreciably affected by either scrubber or the CAC.However,the wet scrubber and CAC appeared to decrease the overall particle size distribution.Such an effect of the dry scrubber was not consistently observed,but this is probably related to the particular sampling location downstream of the scrubber which allowed for significant mixing of the scrubber exhaust and other return air.Aside from the insights gained with respect to the three specific dust control case studies revisited here,this work demonstrates the value of preserved dust samples for follow-up investigation more broadly.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Association of the glycemic background patterns and the diabetes management efficacy in poorly controlled type 2 diabetes

BACKGROUND Inadequate glycemic control in patients with type 2 diabetes(T2DM)is a major public health problem and a significant risk factor for the progression of diabetic complications.AIM To evaluate the effects of intensive and supportive glycemic management strategies over a 12-month period in individuals with T2DM with glycated hemoglobin(HbA1c)≥10%and varying backgrounds of glycemic control.METHODS This prospective observational study investigated glycemic control in patients with poorly controlled T2DM over 12 months.Participants were categorized into four groups based on prior glycemic history:Newly diagnosed,previously well controlled with recent worsening,previously off-target but now worsening,and HbA1c consistently above 10%.HbA1c levels were monitored quarterly,and patients received medical,educational,and dietary support as needed.The analysis focused on the success rates of good glycemic control and the associated factors within each group.RESULTS The study showed significant improvements in HbA1c levels in all participants.The most significant improvement was observed in individuals newly diagnosed with diabetes:65%achieved an HbA1c target of≤7%.The results varied between participants with different glycemic control histories,followed by decreasing success rates:39%in participants with previously good glycemic control,21%in participants whose glycemic control had deteriorated compared to before,and only 10%in participants with persistently poor control,with mean HbA1c levels of 6.3%,7.7%,8.2%,and 9.7%,respectively.After one year,65.2%of the“newly diagnosed patients”,39.3%in the“previously controlled group”,21.9%in the“previously off-target but now worsened'”group and 10%in the“poorly controlled from the start”group had achieved HbA1c levels of 7 and below.CONCLUSION In poorly controlled diabetes,the rate at which treatment goals are achieved is associated with the glycemic background characteristics,emphasizing the need for tailored strategies.Therefore,different and comprehensive treatment approaches are needed for patients with persistent uncontrolled diabetes.

Passive activity enhances residual control ability in patients with complete spinal cord injury

Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these muscles may not effectively engage any of the remaining neurons in the descending pathway.A previous study unexpectedly found that a brief clinical round of passive activity significantly increased volitional muscle activation,as measured by surface electromyography.In this study,we further explored the effect of passive activity on surface electromyographic signals during volitional control tasks among individuals with complete spinal cord injury.Eleven patients with chronic complete thoracic spinal cord injury were recruited.Surface electromyography data from eight major leg muscles were acquired and compared before and after the passive activity protocol.The results indicated that the passive activity led to an increased number of activated volitional muscles and an increased frequency of activation.Although the cumulative root mean square of surface electromyography amplitude for volitional control of movement showed a slight increase after passive activity,the difference was not statistically significant.These findings suggest that brief passive activity may enhance the ability to initiate volitional muscle activity during surface electromyography tasks and underscore the potential of passive activity for improving residual motor control among patients with motor complete spinal cord injury.

Target Seeker Gyro and Controls

A composite target seeker gyro with dual spectral range infrared rays and millimeter waves, and the associated control methodology are developed. The static pressure air floated ball bearing is used to sustain the outer frame, the optical fiber and wave guide are used to transmit these two kinds of signals to the rear part of the gyro, and the stator coils are used to get non contact angular measurement. Composite guiding, scanning, tracing and controlling can be achieved, the maximum tracing angular velocity can be as high as 16(°)/s.

Time-varying Sliding Mode Controls in Rigid Spacecraft Attitude Tracking

To solve the problem of attitude tracking of a rigid spacecraft with an either known or measurable desired attitude trajectory, three types of time-varying sliding mode controls are introduced under consideration of control input constraints. The sliding surfaces of the three types initially pass arbitrary initial values of the system, and then shift or rotate to reach predetermined ones. This way, the system trajectories are always on the sliding surfaces, and the system work is guaranteed to have robustness against parameter uncertainty and external disturbances all the time. The controller parameters are optimized by means of genetic algorithm to minimize the index consisting of the weighted index of squared error （ISE） of the system and the weighted penalty term of violation of control input constraint. The stability is verified with Lyapunov method. Compared with the conventional sliding mode control, simulation results show the proposed algorithm having better robustness against inertia matrix uncertainty and external disturbance torques.

Food safety controls in different governance structures in China's vegetable and fruit industry

Food safety issues constitute an international topic discussed by many scholars. Although there is an extensive body of literature on comparisons of food safety control practices across different governance structures, these studies have been conducted mainly in terms of qualitative and descriptive analysis. In addition, little attention has been given to family farms. This study addresses the food safety control practices adopted by firms with different governance structures in China. Food safety control is expressed by the following aspects, i.e., pollution-free, green, organic, and/or geographical indication prod- ucts certification, establishment of production records, and pesticide residue testing. Three types of governance structures that engage in agricultural production are distinguished： farmer cooperatives, agricultural companies, and family farms. The food safety control practices of various governance structures are investigated based on a database that comprises 600 vegetable and fruit enterprises in Zhejiang, China. The results show that （1） pesticide residue testing is adopted by the most firms, followed by products certification, and production records are adopted by the fewest firms, and （2） agricul- tural companies adopt more food safety control practices than family farms, while farmer cooperatives adopt the fewest food safety control practices. Governance structure features of a cooperative in terms of ownership, decision-making, and income distribution are the main reasons for the low level of food safety control in the cooperative.

Temporal and Spatial Variations in the Climate Controls of Vegetation Dynamics on the Tibetan Plateau during 1982–2011

The ecosystem of the Tibetan Plateau is highly susceptible to climate change. Currently, there is little discussion on the temporal changes in the link between climatic factors and vegetation dynamics in this region under the changing climate.By employing Normalized Difference Vegetation Index data, the Climatic Research Unit temperature and precipitation data,and the in-situ meteorological observations, we report the temporal and spatial variations in the relationships between the vegetation dynamics and climatic factors on the Plateau over the past three decades. The results show that from the early 1980s to the mid-1990s, vegetation dynamics in the central and southeastern part of the Plateau appears to show a closer relationship with precipitation prior to the growing season than that of temperature. From the mid-1990s, the temperature rise seems to be the key climatic factor correlating vegetation growth in this region. The effects of increasing temperature on vegetation are spatially variable across the Plateau: it has negative impacts on vegetation activity in the southwestern and northeastern part of the Plateau, and positive impacts in the central and southeastern Plateau. In the context of global warming, the changing climate condition(increasing precipitation and significant rising temperature) might be the potential contributor to the shift in the climatic controls on vegetation dynamics in the central and southeastern Plateau.

Numerical modelling of structural controls on fluid flow and mineralization

This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit （Yangchun, Guangdong Province, China） and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland （Australia）. Two modelling approaches, discrete deformation modelling and continuum coupled deformation and fluid flow modelling, are involved. The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit, and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures. The continuum coupled deformation and fluid flow model indicates that pattern of the Cu- veins near the Shilu deposit is the result of shear strain localization, development of dilation and fluid focussing into the dilatant fracture segments. The 3D case-study models （with deformation and fluid flow coupling） on the Hodgkinson Province generated a number of potential gold mineralization

RESEARCH ON MECHANICAL MEASUREMENT-ORIENTED INTELLIGENT VIRTUAL CONTROLS

Intelligent virtual control (IVC) is an intelligent measurement instrumentunit with the function of actual measurement instruments, and the unit can be used as basic buildingblock for a variety of more complex virtual measurement instruments on a PC. IVC is a furtheradvancement from virtual instrument (VI), and it fuses the function modules and the controls modulesso that the relationship between the functions and controls of an instrument is imbedded in one ormore units. The design, implementation and optimization methods of IVCs are introduced. The computersoftware representation of IVCs is discussed. An example of an actual VI constructed with thebuilding blocks of IVCs is given.

Validation of housekeeping genes as internal controls for studying the gene expression in Pyropia haitanensis(Bangiales, Rhodophyta) by quantitative real-time PCR

Pyropia haitanensis is an economically important mariculture crop in China and has a high research value for several life phenomena, for example environmental tolerance. To explore the mechanisms underlying these characteristics, gene expression has been investigated at the whole transcriptome level. Gene expression studies using quantitative real-time PCR should start by selecting an appropriate internal control gene; therefore, the absolute expression abundance of six housekeeping genes （18S rRNA （18S）, ubiquitin-conju-ating enzyme （UBC）, actin （ACT）, β-tubulin （TUB）, elongation factors 2 （EF2）, and glyceraldehyde-3-phos- phate dehydrogenase （GAPDH） examined by the quantitative real-time PCR in samples corresponding to different strains, life-cycle stages and abiotic stress treatments. Their expression stabilities were assessed by the comparative cycle threshold （Ct） method and by two different software packages： geNorm and NormFinder. The most stable housekeeping gene is UBC and the least stable housekeeping is GADPH. Thus, it is proposed that the most appropriate internal control gene for expression analyses in P. haitanensis is UBC. The results pave the way for further gene expression analyses of different aspects of P. haitanensis biology including different strains, life-history stages and abiotic stress responses.

Geological Controls on the CBM Productivity of No.15 Coal Seam of Carboniferous–Permian Taiyuan Formation in Southern Qinshui Basin and Prediction for CBM High-yield Potential Regions

Coalbed methane(CBM) resources in No.15 coal seam of Taiyuan Formation account for 55% of the total CBM resources in southern Qinshui Basin(SQB), and have a great production potential. This study aims at investigating the CBM production in No.15 coal seam and its influence factors. Based on a series of laboratory experiments and latest exploration and development data from local coal mines and CBM companies, the spatial characteristics of gas production of No.15 coal seam were analyzed and then the influences of seven factors on the gas productivity of this coal seam were discussed, including coal thickness, burial depth, gas content, ratio of critical desorption pressure to original coal reservoir pressure(RCPOP), porosity, permeability, and hydrogeological condition. The influences of hydrological condition on CBM production were analyzed based on the discussions of four aspects: hydrogeochemistry, roof lithology and its distribution, hydrodynamic field of groundwater, and recharge rate of groundwater. Finally, a three-level analytic hierarchy process(AHP) evaluation model was proposed for predicting the CBM potentials of the No.15 coal seam in the SQB. The best prospective target area for CBM production of the No.15 coal seam is predicted to be in the districts of Panzhuang, Chengzhuang and south of Hudi.

Preventions and Controls on Congenital Transmissions of Zika: Mathematical Analysis

Vector-borne diseases threat lives of millions of people in many countries of the world. Zika is one of the vector-borne diseases which initially spread by the bite of an infected Aedes species mosquito (Ae. aegypti and Ae. albopictus) and then it transmits vertically from a pregnant woman to her fetus or from an infected human to their sexual partners. The congenital transmission of Zika virus (ZIKV) results in new born with microcephaly and other neurological abnormalities. The control of infected mosquitos is the best efficient way to control spread of ZIKV. Spraying insecticide is the safest and easiest way to control mosquitos, but sometimes it is cost worthy for long period of spraying. Controlled prevention from the vector bites can also help to control disease spread. To control congenital transmission and sexual transmission of ZIKV, preventions should be taken to reduce/stop pregnancy rate and safe heterosexual transmission among adults. Also, there is no specific treatment available for Zika disease. Treatment is aimed at relieving symptoms with rest, fluids and medications. Controlled combinations of rest, fluids and medications will help to recover early. As costs are incorporated with spraying, preventions and treatment, our aim is to minimise the total cost associated by controlling spraying, preventions and treatment. To fulfil this purpose a mathematical model is developed with disease dynamics in nine compartments namely Susceptible human child, Susceptible human male, Susceptible human female, Infected human child, Infected human male, Infected human female, Recovered human, Susceptible vector and Infected vector including vertical transmission of Zika disease. Numerical simulations have been carried out to optimise controls, and basic reproduction number and stability are calculated.

Timing and structural controls on skarn-type and vein-type mineralization at the Xitian tin-polymetallic deposit, Hunan Province, SE China

Xitian tin-polymetallic deposit, located in the eastern Hunan Province, SE China, hosts quartz vein and skarn in the contact zone between carbonate and two stages granites. Critical geodynamic questions for South China are whether different types of mineralization form in the same time and how the magmatism–tectonic system controls the ore-forming process. Based on the distribution of the orebodies, six cassiterite samples from different types of mineralization are collected for dating. In-situ LA-MCICP-MS U–Pb isotopic data yielded concordia low intercept ages between 154 and 157 Ma, indicating that different types of mineralization belong to the same magmatism–mineralization system. Coupled with the study of the kinematic indicators, it suggests that the structural control of the wall rocks constrain the types of mineralization. These results provide further evidence of a close temporal link between the structure and the tin-polymetallic mineralization in Xitian deposit. Considering the structure in the district, granite dome plays an important role in the ore-forming process. The age and structural signatures in Xitian deposit are the response to the subduction of Pacific Plate.

Suppression of Amplitude Decoherence in Arbitrary n-Level Atom in -Configuration with Bang-Bang Controls

In this paper, we give Bang-Bang （BB） decoupling schemes to suppress the amplitude decoherence in the five-and six-level atom systems in ≡-configuration. We generalize this scheme to the arbitrary level atom system in ≡-configuration. The corresponding decoupling operators are given explicitly.

Lithostructural controls in Douala-Buea Region landscape (SW Cameroon margin):Insights from morphometric analysis

The Douala-Buea Region(DBR;4°-5°N,9°-10°30’E),a portion of the southern Cameroon passive margin,developed on the Proterozoic granito-gneissic basement and the Cretaceous to Recent volcanosedimentary cover,was explored in order to evaluate the lithology and tectonics controls on its landscape usingthequalitativeandquantitative geomorphological analyses based on 30 m resolution Digital Elevation Models(DEM)and field evidences.This area displays an uneven and complex landscape differentiated into four morphological units:Douala,Nkondjock,Kumba and Buea Units.The Douala Unit corresponds to the Coastal Plain and is extended on the Douala-Kribi/Camposedimentarybasin.The Nkondjock Unit represents a middle plateau developed on a Proterozoic granito-gneissic basement.The Kumba Unit matches with the southernmost volcanic Western Cameroon High Plateau.The Buea Unit corresponds to the Mount Cameroon stratovolcano.The relief analysis through mountain-front sinuosity(Smf,1.19–1.43)and relative relief ratio(Rr,0.10–2.31)vary from one unit to another.The drainage network analysis including drainage patterns,stepped longitudinalriverprofiles,theassociated morphometric indexes,notably the concavity index(IC,0.56–0.88),deviation(D,267–2912 m),basin asymmetry factor(A_(F),6.37–42.12),hypsometric integral(HI,0.10–0.29),valley floor width to valley height ratio(V_(f),0.36–2.75),elongation ratio(R_(e),0.30–0.50),watershed slope(S,6.88–88.88)and stream length gradient index(SL,0–3332)vary from one basin to another too.These results also show the heterogeneous and uneven DBR landscape controlled by its lithology and active tectonics.The drainage system reveals concave to concavo-convex longitudinal river profile shapes with knick points,asymmetric basins,and fault reactivations,and highlights the tectonics activity that used to occur through the time and their control on the morphology.Together,they document the lithostructural controls on the DBR landscape evolution,extendable in the whole SW Cameroon margin.

Main Controls on Hydrocarbon Accumulation in the Paleozoic in Central Saudi Arabia

Sandi Arabia is renown for its rich oil and gas Mesozoic. However, the discovery of Paleozoic fields in resources with the bulk of the reserves reservo/red in the the late 1980s has encouraged further exploration in the Paleozoic. This paper reviews the salient features of the Paleozoic petroleum geology in central Saudi Arabia and discusses the main factors controlling hydrocarbon accumulation in the Paleozoic. The Lower Silurian Qusaiba hot shale is the principal source rock for the hydrocarbons discovered in the Ordovician to Permian reservoirs. Of them, the Permo- Carboniferous Unayzah and Upper Ordovician Sarah Formations have the best exploration potential. The key factors controlling hydrocarbon accumulation in the Unayzah Formation are migration pathways and reservoir petrophysics. The key factors controlling hydrocarbon accumulation in the Sarah Formation are reservoir petrophysics and the development of structural traps.

Notch signaling controls chondrocyte hypertrophy via indirect regulation of Sox9

RBPjk-dependent Notch signaling regulates both the onset of chondrocyte hypertrophy and the progression to terminal chondrocyte maturation during endochondral ossification. It has been suggested that Notch signaling can regulate Sox9 transcription, although how this occurs at the molecular level in chondrocytes and whether this transcriptional regulation mediates Notch control of chondrocyte hypertrophy and cartilage development is unknown or controversial. Here we have provided conclusive genetic evidence linking RBPjk-dependent Notch signaling to the regulation of Sox9 expression and chondrocyte hypertrophy by examining tissuespecific Rbpjk mutant（Prx1Cre;Rbpjkf/f）, Rbpjk mutant/Sox9 haploinsufficient（Prx1Cre;Rbpjkf/f;Sox9f/1）,and control embryos for alterations in SOX9 expression and chondrocyte hypertrophy during cartilage development. These studies demonstrate that Notch signaling regulates the onset of chondrocyte maturation in a SOX9-dependent manner, while Notch-mediated regulation of terminal chondrocyte maturation likely functions independently of SOX9. Furthermore, our in vitro molecular analyses of the Sox9 promoter and Notch-mediated regulation of Sox9 gene expression in chondrogenic cells identified the ability of Notch to induce Sox9 expression directly in the acute setting, but suppresses Sox9 transcription with prolonged Notch signaling that requires protein synthesis of secondary effectors.