A global model of intensity autocorrelation to determine laser pulse duration

We present a new global model of collinear autocorrelation based on second harmonic generation nonlinearity.The model is rigorously derived from the nonlinear coupled wave equation specific to the autocorrelation measurement configuration,without requiring a specific form of the incident pulse function.A rigorous solution of the nonlinear coupled wave equation is obtained in the time domain and expressed in a general analytical form.The global model fully accounts for the nonlinear interaction and propagation effects within nonlinear crystals,which are not captured by the classical local model.To assess the performance of the global model compared to the classic local model,we investigate the autocorrelation signals obtained from both models for different incident pulse waveforms and different full-widthes at half-maximum(FWHMs).When the incident pulse waveform is Lorentzian with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 399.9 fs,while the classic local model predicts an FWHM of 331.4 fs.The difference between the two models is 68.6 fs,corresponding to an error of 17.2%.Similarly,for a sech-type incident pulse with an FWHM of 200 fs,the global model predicts an autocorrelation signal FWHM of 343.9 fs,while the local model predicts an FWHM of 308.8 fs.The difference between the two models is 35.1 fs,with an error of 10.2%.We further examine the behavior of the models for Lorentzian pulses with FWHMs of 100 fs,200 fs and 500 fs.The differences between the global and local models are 17.1 fs,68.6 fs and 86.0 fs,respectively,with errors approximately around 17%.These comparative analyses clearly demonstrate the superior accuracy of the global model in intensity autocorrelation modeling.

A Probing Model of Secret Key Generation Based on Channel Autocorrelation Function

Secret key generation(SKG)is a promising solution to the problem of wireless communications security.As the first step of SKG,channel probing affects it significantly.Although there have been some probing schemes,there is a lack of research on the optimization of the probing process.This study investigates how to optimize correlated parameters to maximize the SKG rate(SKGR)in the time-division duplex(TDD)mode.First,we build a probing model which includes the effects of transmitting power,the probing period,and the dimension of sample vectors.Based on the model,the analytical expression of the SKGR is given.Next,we formulate an optimization problem for maximizing the SKGR and give an algorithm to solve it.We conclude the SKGR monotonically increases as the transmitting power increases.Relevant mathematical proofs are given in this study.From the simulation results,increasing appropriately the probing period and the dimension of the sample vector could increase the SKGR dramatically compared to a yardstick,which indicates the importance of optimizing the parameters related to the channel probing phase.

Design of a spatial sampling scheme considering the spatial autocorrelation of crop acreage included in the sampling units

Information on crop acreage is important for formulating national food polices and economic planning. Spatial sampling, a combination of traditional sampling methods and remote sensing and geographic information system （GIS） technology, provides an efficient way to estimate crop acreage at the regional scale. Traditional sampling methods require that the sampling units should be independent of each other, but in practice there is often spatial autocorrelation among crop acreage contained in the sampling units. In this study, using Dehui County in Jilin Province, China, as the study area, we used a thematic crop map derived from Systeme Probatoire d＇Observation de la Terre （SPOT-5） imagery, cultivated land plots and digital elevation model data to explore the spatial autocorrelation characteristics among maize and rice acreage included in sampling units of different sizes, and analyzed the effects of different stratification criteria on the level of spatial autocorrelation of the two crop acreages within the sampling units. Moran＇s/, a global spatial autocorrelation index, was used to evaluate the spatial autocorrelation among the two crop acreages in this study. The results showed that although the spatial autocorrelation level among maize and rice acreages within the sampling units generally decreased with increasing sampling unit size, there was still a significant spatial autocorrelation among the two crop acreages included in the sampling units （Moran＇s / varied from 0.49 to 0.89）, irrespective of the sampling unit size. When the sampling unit size was less than 3000 m, the stratification design that used crop planting intensity （CPI） as the stratification criterion, with a stratum number of 5 and a stratum interval of 20% decreased the spatial autocorrelation level to almost zero for the maize and rice area included in sampling units within each stratum. Therefore, the traditional sampling methods can be used to estimate the two crop acreages. Compared with CPI, there was still a strong spatial correlation among the two crop acreages included in the sampling units belonging to each stratum when cultivated land fragmentation and ground slope were used as stratification criterion. As far as the selection of stratification criteria and sampling unit size is concerned, this study provides a basis for formulating a reasonable spatial sampling scheme to estimate crop acreage.

LPI radar signal detection based on the combination of FFT and segmented autocorrelation plus PAHT

This paper proposes a desirable method to detect different kinds of low probability of intercept (LPI) radar signals, targeted at the main intra-pulse modulation method of LPI radar signals including the signals of linear frequency modulation, phase code, and frequency code. Firstly, it improves the coherent integration of LPI radar signals by adding the periodicity of the ambiguity function. Then, it develops a frequency domain detection method based on fast Fourier transform (FFT) and segmented autocorrelation function to detect signals without features of linear frequency modulation by virtue of the distribution characteristics of noise signals in the frequency domain. Finally, this paper gives a verification of the performance of the method for different signal-to-noise ratios by conducting simulation experiments, and compares the method with existing ones. Additionally, this method is characterized by the straightforward calculation and high real-time performance, which is conducive to better detecting all kinds of LPI radar signals.

Vertex degree autocorrelation topological index and its application in QSAR study of organic chemicals

Considering the calculated result and higher degeneracy existing in the calculation of autocorrelation topological index totally depend on experimental parameters, a new group of autocorrelation topological index as A t, B t, C t and D t was designed and developed based on the vertex degree of molecular topology and autocorrelation function of mathematics. Autocorrelation function f(i) was calculated from the square root of the vertex degree, revised vertex degree and their combination, and they are (δ i) 1/2 , (δ V i) 1/2 ,(δ V i+δ i) 1/2  and (δ E i-δ i) 1/2 / N. With the matrix description method achieved, and the unit input in matrix of unsaturated bond and heteroatoms revised based on the adjacency matrix and distance matrix of organic molecular graph, the corresponding computer software has also been designed and developed. Better results have been obtained for the application of these indexes in QSAR study of organic chemicals.

Linear complexity and autocorrelation of a new class of binary generalized cyclotomic sequences of order two and length pqr

Cyclotomic sequences have good cryptographic properties and are closely related to difference sets.This paper proposes a new class of binary generalized cyclotomic sequences of order two and length pqr.Its linear complexity,minimal polynomial,and autocorrelation are investigated.The results show that these sequences have a large linear complexity when 2∈D1,which means they can resist the Berlekamp-Massey attack.Furthermore,the autocorrelation values are close to 0 with a probability of approximately 1?1/r.Therefore,when r is a big prime,the new sequence has a good autocorrelation.

Parallelism of spatial data mining based on autocorrelation decision tree

Define and theory of autocorrelation decision tree （ADT） is introduced. In spatial data mining, spatial parallel query are very expensive operations. A new parallel algorithm in terms of autocorrelation decision tree is presented. And the new method reduces CPU- and I/O-time and improves the query efficiency of spatial data. For dynamic load balancing, there are better control and optimization. Experimental performance comparison shows that the improved algorithm can obtain a optimal accelerator with the same quantities of processors. There are more completely accesses on nodes. And an individual implement of intelligent information retrieval for spatial data mining is presented.

Spatial autocorrelation analysis of 13 leading malignant neoplasms in Taiwan: a comparison between the 1995-1998 and 2005-2008 periods

Spatial autocorrelation methodologies, including Global Moran’s I and Local Indicators of Spatial Association statistic (LISA), were used to describe and map spatial clusters of 13 leading malignant neoplasms in Taiwan. A logistic regression fit model was also used to identify similar characteristics over time. Two time periods (1995-1998 and 2005-2008) were compared in an attempt to formulate common spatio-temporal risks. Spatial cluster patterns were identified using local spatial autocorrelation analysis. We found a significant spatio-temporal variation between the leading malignant neoplasms and well-documented spatial risk factors. For instance, in Taiwan, cancer of the oral cavity in males was found to be clustered in locations in central Taiwan, with distinct differences between the two time periods. Stomach cancer morbidity clustered in aboriginal townships, where the prevalence of Helicobacter pylori is high and even quite marked differences between the two time periods were found. A method which combines LISA statistics and logistic regression is an effective tool for the detection of space-time patterns with discontinuous data. Spatio-temporal mapping comparison helps to clarify issues such as the spatial aspects of both two time periods for leading malignant neoplasms. This helps planners to assess spatio-temporal risk factors, and to ascertain what would be the most advantageous types of health care policies for the planning and implementation of health care services. These issues can greatly affect the performance and effectiveness of health care services and also provide a clear outline for helping us to better understand the results in depth.

Identifying Vehicular Crash High Risk Locations along Highways via Spatial Autocorrelation Indices and Kernel Density Estimation

Identifying vehicular crash high risk locations along highways is important for understanding the causes of vehicle crashes and to determine effective countermeasures based on the analysis. This paper presents a GIS approach to examine the spatial patterns of vehicle crashes and determines if they are spatially clustered, dispersed, or random. Moran’s I and Getis-Ord Gi* statistic are employed to examine spatial patterns, clusters mapping of vehicle crash data, and to generate high risk locations along highways. Kernel Density Estimation (KDE) is used to generate crash concentration maps that show the road density of crashes. The proposed approach is evaluated using the 2013 vehicle crash data in the state of Indiana. Results show that the approach is efficient and reliable in identifying vehicle crash hot spots and unsafe road locations.

Application of Non-Linear Cobb-Douglas Production Function with Autocorrelation Problem to Selected Manufacturing Industries in Bangladesh

In developing counties, efficiency of economic development has been determined by the analysis of industrial production. An examination of the characteristic of industrial sector is an essential aspect of growth studies. The growth of a country can be measured by Gross Domestic Product (GDP). GDP is substantially affected by the industrial output. Industrial gross output is mainly a function of capital and labor input. If the effect of labor and capital input to output is at a satisfactory level in an industry or in a group of industries, then industrial investment will increase. As a result, the number of industries will increase, which will directly affect GDP and also will decrease the unemployment rate. This is why, industrial input-output relationship is so important for any industry as well as for the overall industrial sector of a country. To forecast the production of a firm is necessary to identify the appropriate model. MD. M. Hossain et al. [1] have shown that Cobb-Douglas production function with additive errors was more suitable for some selected manufacturing industries in Bangladesh. The main purpose of this paper is to detect the autocorrelation problem of Cobb-Douglas production model with additive errors. The result shows that autocorrelation is presented in some manufacturing industries. Finally, this paper removes the autocorrelation problem and re-estimates the parameters of the Cobb- Douglas production function with additive errors.

The Partial Autocorrelation Function of an ARMA (1.1) Process

In this paper, we obtain an explicit expression for the partial autocorrelation of an ARMA (1.1) process and discuss its asymptotic behaviour briefly.

A Novel Hybrid Method for Measuring the Spatial Autocorrelation of Vehicular Crashes: Combining Moran’s Index and Getis-Ord G_i<sup style='margin-left:-7px;'>*</sup>Statistic

Spatial autocorrelation is a measure of the correlation of an observation with other observations through space. Most statistical analyses are based on the assumption that the values of observations are independent of one another. Spatial autocorrelation violates this assumption, because observations at near-by locations are related to each other, and hence, the consideration of spatial autocorrelations has been gaining attention in crash data modeling in recent years, and research have shown that ignoring this factor may lead to a biased estimation of the modeling parameters. This paper examines two spatial autocorrelation indices: Moran’s Index;and Getis-Ord Gi* statistic to measure the spatial autocorrelation of vehicle crashes occurred in Boone County roads in the state of Missouri, USA for the years 2013-2015. Since each index can identify different clustering patterns of crashes, therefore this paper introduces a new hybrid method to identify the crash clustering patterns by combining both Moran’s Index and Gi*?statistic. Results show that the new method can effectively improve the number, extent, and type of crash clustering along roadways.

Using Autocorrelation Analysis to Build the Evaluating Model of Train Impulse Grade

To the shortage of the traditional analysis methods about train impact,this paper put forward a new method us- ing autocorrelation theory and virtual instrument technology to analyze train impulse Using a double-MCU system,the accelera- tion signals were acquired at different speed by train,and were transmitted into PC through USB interface.Besides the impulse signals,the acquisition data included other useless signals.The autocorrelation function was small when trains run steadily,but was greater during train impact happened.So the autocorrelation function was adopted to distill the valid impulse data.After frequency domain analyzed and autocorrelation analyzed on the Virtual Instrument flat,a new train impulse grade assessment cri- terion was built,based on the correlation peak and the width of the peak.In experiment,the impulse signal was separated from noise signal well and truly,and the quantitative model of evaluating train impulse was believable.This system possessed a certain extent theory value and application value.

Analysis of Spatial Autocorrelation Patterns of Heavy and Super-Heavy Rainfall in Iran

Rainfall is a highly variable climatic element, and rainfall-related changes occur in spatial and temporal dimensions within a regional climate. The purpose of this study is to investigate the spatial autocorrelation changes of Iran＇s heavy and super-heavy rainfall over the past 40 years. For this purpose, the daily rainfall data of 664 meteorological stations between 1971 and 2011 are used. To analyze the changes in rainfall within a decade, geostatistical techniques like spatial autocorrelation analysis of hot spots, based on the Getis-Ord Gi statistic, are employed. Furthermore, programming features in MATLAB, Surfer, and GIS are used. The results indicate that the Caspian coast, the northwest and west of the western foothills of the Zagros Mountains of Iran, the inner regions of Iran, and southern parts of Southeast and Northeast Iran, have the highest likelihood of heavy and super-heavy rainfall. The spatial pattern of heavy rainfall shows that, despite its oscillation in different periods, the maximum positive spatial autocorrelation pattern of heavy rainfall includes areas of the west, northwest and west coast of the Caspian Sea. On the other hand, a negative spatial autocorrelation pattern of heavy rainfall is observed in central Iran and parts of the east, particularly in Zabul. Finally, it is found that patterns of super-heavy rainfall are similar to those of heavy rainfall.

Confocal laser speckle autocorrelation imaging of dynamic flow in microvasculature

Laser speckle imaging has been widely used for in-vivo visualization of blood perfusion in biological tissues.However,existing laser speckle imaging techniques suffer from limited quantification accuracy and spatial resolution.Here we re-port a novel design and implementation of a powerful laser speckle imaging platform to solve the two critical limitations.The core technique of our platform is a combination of line scan confocal microscopy with laser speckle autocorrelation imaging,which is termed Line Scan Laser Speckle Autocorrelation Imaging(LS-LSAI).The technical advantages of LS-LSAI include high spatial resolution(~4.4μm)for visualizing and quantifying blood flow in microvessels,as well as video-rate imaging speed for tracing dynamic flow.

Implementation of an Autocorrelation Pitch Detector in Application to Query by Humming

A pitch detector for application in query by humming (QBH) is implemented in this paper. This algorithm is made up of two parts: note segmentation and pitch detection. In the first part, voiced/silence decision is made on each segment of the input signal by a pattern recognition approach, and further, the preparatory note borders are obtained; then, via analysis of the instantaneous energy contour, the adjacent notes that adhere to each other are separated. In the second part, pitch is estimated for all frames contained in a note's duration by an autocorrelation method and the mean of these pitch values is taken as the average pitch of this note. Moreover, in order to remove the effect of formant structure, a nonlinear preprocessing is adopted in the pitch detection part and the autocorrelation function is properly weighted before peak picking. Finally, hummings of several experimenters with different voice characters are recorded to test this pitch detector, whose efficiency and reliability are proved by the results.

A Hybrid Modified Sine Cosine Algorithm Using Inverse Filtering and Clipping Methods for Low Autocorrelation Binary Sequences

The essential purpose of radar is to detect a target of interest and provide information concerning the target’s location,motion,size,and other parameters.The knowledge about the pulse trains’properties shows that a class of signals is mainly well suited to digital processing of increasing practical importance.A low autocorrelation binary sequence(LABS)is a complex combinatorial problem.The main problems of LABS are low Merit Factor(MF)and shorter length sequences.Besides,the maximum possible MF equals 12.3248 as infinity length is unable to be achieved.Therefore,this study implemented two techniques to propose a new metaheuristic algorithm based on Hybrid Modified Sine Cosine Algorithm with Cuckoo Search Algorithm(HMSCACSA)using Inverse Filtering(IF)and clipping method to achieve better results.The proposed algorithms,LABS-IF and HMSCACSA-IF,achieved better results with two large MFs equal to 12.12 and 12.6678 for lengths 231 and 237,respectively,where the optimal solutions belong to the skew-symmetric sequences.The MF outperformed up to 24.335%and 2.708%against the state-of-the-art LABS heuristic algorithm,xLastovka,and Golay,respectively.These results indicated that the proposed algorithm’s simulation had quality solutions in terms of fast convergence curve with better optimal means,and standard deviation.

AUTOCORRELATION OF TRACE ELEMENT CONTENTS IN SOILS OF TIANJIN PLAIN AREA

Contents of 13 trace elements in soils. from 36 locations in Tianjin plain area were determined. Values of Moran's l of the trace element contents in soils of the area were calculated. The spatial autocorrelation, the directional characteristics of autocorrelation,the relationship between autocorrelation and lag of sampling as well as the relationship between autocorrelation in different directions and lag of sampling were investigated. Under the sampling density of 300 km2 per sample, significant positive autocorrelation was detected for most trace elements studied. The most significant autocorrelation was found in horizon A Where the original distribution patterns of the elements have been modified remarkably by natural forces and human activities. The spatial structures of Hg, Cd, Pb, Zn, and As contents in suffoce soil were forther altered by pollution and agricultural practice.

Statistical Study on the HF Radar Multi-Frequency Autocorrelation Functions

To fit the autocorrelation functions (ACFs) of HF radar ionospheric backscattered signal to an analytical function, which is obtained theoretically by introducing a Lagrangian description of turbulent motion, can estimate directly the turbulent parameters of the scatters. We use this method to analyze the HF radar ACFs. A statistical study has been performed with the multi-frequency data, and shown that the statistical results are not the same in different frequency bands. We found that the influences of the limit radar time resolution and the received noise played the important roles in causing this inconsistency, both of them result in an additional expansion to the spectral width, and cause more Lorentzian behavior to ACFs; these two limitations affect the form of ACFs more seriously in the higher frequency band. We verified this by a simple simulation.

Research on the Variation of Population Distribution and Its Characteristics Based on Spatial Autocorrelation Method: A Case Study of Poyang Lake Region in Jiangxi Province

According to Statistical Yearbook of Jiangxi Province(2001～2006),We analyze the time-space variation of population distribution of Poyang Lake region from the two points of view.The former is quality of population,which involves culture structure,occupational structure,age structure and sex structure of population.The latter is quantity of population,which only involves the amount of population.Furthermore,we can reveal the internal relations and action mechanism of variation of population distribution by analyzing the regional economic development,population urbanization,land use and ecological landscape of Poyang Lake region.It is important to provide help for region planning,ecological landscape planning and environmental protection by correct understanding the man-land relationship of natural-human ecosystem in Poyang Lake region.