Synergistic effects of the entomopathogenic fungus Isaria javanica and low doses of dinotefuran on the efficient control of the rice pest Sogatella furcifera

The rice planthopper,Sogatella furcifera,is a piercing-sucking insect pest of rice,Oryza sativa.It is responsible for significant crop yield losses,and has developed moderate to high resistance to several commonly used chemical insecticides.We investigated the effects of the insect fungal pathogen Isaria javanica,alone and in combination with the chemical insecticide dinotefuran,on S.furcifera under both laboratory and field conditions.Our results show that I.javanica displays high infection efficiency and mortality for different stages of S.furcifera,reducing adult survival,female oviposition and ovary development.Laboratory bioassays showed that the combined use of I.javanica with a low dose(4-16 mg L^(-1))of dinotefuran resulted in higher mortality in S.furcifera than the use of I.javanica or dinotefuran alone.The combined treatment also had more significant effects on several host enzymes,including superoxide dismutase,catalase,peroxidase,and prophenol oxidase activities.In field trials,I.javanica effectively suppressed populations of rice planthoppers to low levels(22-64%of the level in untreated plots).Additional field experiments showed synergistic effects,i.e.,enhanced efficiency,for the control of S.furcifera populations using the combination of a low dose of I.javanica(1×10^(4) conidia mL^(-1))and a low dose of dinotefuran(~4.8-19.2%of normal field use levels),with control effects of>90%and a population level under 50 insects per 100 hills at 3-14 days post-treatment.Our findings indicate that the entomogenous fungus I.javanica offers an attractive biological control addition as part of the integrated pest management(IPM)practices for the control of rice plant pests.

Application Effect of Feedforward Control in Outpatient Blood Specimen Management

Objective:To analyze the application effect of feedforward control in outpatient blood specimen management.Methods:1,200 patients who had their venous blood collected in outpatient phlebotomy room of our hospital's outpatient clinic from January 2021 to April 2021 were selected as study subjects and divided into 600 cases in the control group and 600 cases in the observation group.The two groups of patients were compared in terms of their satisfaction with the staff,the efficiency of the nurses and the quality of nursing care,turnaround time before specimen analysis,the rejection rate of the blood specimens,and the time of result reporting.Results:After the implementation of feedforward control,patients'satisfaction with staff,nurses work efficiency and quality of care,turnaround time before specimen analysis,specimen rejection rate,and result reporting time in the observation group were significantly higher than those in the control group(P<0.05).Conclusion:The application of feedforward control in the management of outpatient blood specimens has significant effect,which effectively improves patients'satisfaction,enhances the efficiency of nurses and the quality of nursing care,shortens the turnaround time of specimens before analysis and the reporting time of results,and reduces the rejection rate of specimens.

Prevention and Control Strategies of Nosocomial Infection and Effectiveness Evaluation in a Tertiary Teaching Hospital during the Epidemic of COVID-19

Objective: To evaluate the role of prevention and control strategies for nosocomial infection in a tertiary teaching hospital during the sudden outbreak of Corona Virus Disease 2019 (COVID-19). Methods: The hospital initiated an emergency plan involving multi-departmental defense and control. It adopted a series of nosocomial infection prevention and control measures, including strengthening pre-examination and triage, optimizing the consultation process, improving the hospital’s architectural composition, implementing graded risk management, enhancing personal protection, and implementing staff training and supervision. Descriptive research was used to evaluate the short-term effects of these in-hospital prevention and control strategies. The analysis compared changes in related evaluation indicators between January 24, 2020 and February 12, 2020 (Chinese Lunar New Year’s Eve 2020 to lunar January 19) and the corresponding lunar period of the previous year. Results: Compared to the same period last year, the outpatient fever rate increased by 1.85-fold (P P Conclusion: The nosocomial infection prevention and control strategies implemented during this specific period improved the detection and control abilities for the COVID-19 source of infection and enhanced the compliance with measures. This likely contributed significantly to avoiding the occurrence of nosocomial infection.

Control Effect of UAV Low Volume Spray Technology on Thrips and Tomato Spotted Wilt Virus in Tobacco Field

[Objectives]The paper was to explore the influence of unmanned aerial vehicle(UAV)low volume spray technology on the control effect of viruliferous thrips and tomato spotted wilt virus(TSWV)under different pesticide concentrations,and to explore the effective control nodes and methods of thrips and TSWV.[Methods]According to the occurrence characteristics of thrips and TSWV,the field control effects of 4 pesticides on thrips and TSWV were tested by UAV with the thrips number and disease index as indicators,following the principle of regional and periodic control trials.[Results]In the groups of UAV and artificial prevention and control,4 agents were used alternatively,including 1%emamectin benzoate ME,1.7%abamectin imidacloprid ME,5%emamectin benzoate WDG,and 30%pyriproxyfen dinotefuran SL.There was no significant difference in the control effect of thrips and TSWV among treatment 1(recommended dosage of UAV agent),treatment 2(reduction of recommended dosage of UAV agent by 25%)and treatment 4(recommended dosage of artificial control agent),and the control effects on thrips were more than 83.16%in the 3 treatments.The disease index of TSWV in the 3 treatments decreased from 8.64±1.37 in the blank control group to less than 3,which reached the prevention and control threshold.But treatment 3(reduction of recommended dosage of UAV agent by 50%)did not reach the prevention and control threshold.The disease index of TSWV in the blank control area increased with the increase of the number of live nymphs of thrips,and there was a significant positive correlation,with good fitness.[Conclusions]UAV has a significant impact on the control effect of thrips and TSWV under different pesticide concentrations.In the actual flight control application,it is recommended that the amount of the pesticides is about 3/4 and not less than 1/2 of that of the artificial application.The control area should be extended to 100 m of the ridge of the tobacco field,and UAV is used periodically to control thrips and TSWV for 5 times from pre-transplanting stage to pre-squaring stage of flue-cured tobacco.The control effect is significantly different from the traditional artificial application.

Design and Simulation of an Audio Signal Alerting and Automatic Control System

A large part of our daily lives is spent with audio information. Massive obstacles are frequently presented by the colossal amounts of acoustic information and the incredibly quick processing times. This results in the need for applications and methodologies that are capable of automatically analyzing these contents. These technologies can be applied in automatic contentanalysis and emergency response systems. Breaks in manual communication usually occur in emergencies leading to accidents and equipment damage. The audio signal does a good job by sending a signal underground, which warrants action from an emergency management team at the surface. This paper, therefore, seeks to design and simulate an audio signal alerting and automatic control system using Unity Pro XL to substitute manual communication of emergencies and manual control of equipment. Sound data were trained using the neural network technique of machine learning. The metrics used are Fast Fourier transform magnitude, zero crossing rate, root mean square, and percentage error. Sounds were detected with an error of approximately 17%;thus, the system can detect sounds with an accuracy of 83%. With more data training, the system can detect sounds with minimal or no error. The paper, therefore, has critical policy implications about communication, safety, and health for underground mine.

Study on the Hook Effect in the Detection of Beta2-Microglobulin with Different Reagents in Fully Automated Biochemical Analyzers

Objective:To investigate the hook effect in the detection of beta2-microglobulin(β2-MG)with different reagents as well as on two fully automated biochemical analyzers and their solutions.Methods:Using immunoturbidimetric assay forβ2-MG as the research object,β2-MG levels were detected by different concentration gradients ofβ2-microglobulin samples in Liedemann,Mack,and Myriad reagents of three manufacturers on two automatic biochemical analyzers,and the difference of the hook effect was comparatively analyzed.Results:Leadman reagent showed the hook effect on the Beckman AU5800 automated biochemistry analyzer,while both Maccura and Mindray reagents did not show the hook effect.After the experiments,we found the limit value of the pre-zone check of Leadman reagent,and changed the parameters of the instrument,when the limit value of the pre-zone check was reached,the instrument automatically diluted the specimen five times and then detected it again.After changing the parameters of the instrument,the correlation between the three methods of detecting samples of different concentrations was r>0.99.Conclusion:Before selecting the application of immunoturbidimetric reagents,we have to carry out the risk assessment of the hook effect and selectively set the parameters of the pre-zone check based on the highest concentration that may occur in the clinic;for the items that may have the hook effect,we have to selectively set the parameters of the pre-zone check when the ratio of average reaction rate and the immediate reaction rate is at the limit value,and the phenomenon of antigen excess may occur,the instrument will carry out automatic dilution before detection,so as to avoid the issuance of erroneous results of high-value samples due to the hook effect.

Sampled-data control through model-free reinforcement learning with effective experience replay

Reinforcement Learning(RL)based control algorithms can learn the control strategies for nonlinear and uncertain environment during interacting with it.Guided by the rewards generated by environment,a RL agent can learn the control strategy directly in a model-free way instead of investigating the dynamic model of the environment.In the paper,we propose the sampled-data RL control strategy to reduce the computational demand.In the sampled-data control strategy,the whole control system is of a hybrid structure,in which the plant is of continuous structure while the controller(RL agent)adopts a discrete structure.Given that the continuous states of the plant will be the input of the agent,the state–action value function is approximated by the fully connected feed-forward neural networks(FCFFNN).Instead of learning the controller at every step during the interaction with the environment,the learning and acting stages are decoupled to learn the control strategy more effectively through experience replay.In the acting stage,the most effective experience obtained during the interaction with the environment will be stored and during the learning stage,the stored experience will be replayed to customized times,which helps enhance the experience replay process.The effectiveness of proposed approach will be verified by simulation examples.

Evaluation of the Effectiveness of “Electron Go out Mosquito Small Lamp” in Disease Vector Mosquito Control Benin West Africa

In the context of mosquito control, a plethora of devices have been put on the market. The effectiveness of these devices is not always proven, but some have interesting principles that have the potential to be a good means of mosquito control. Among these interesting devices are the photonic traps. We have carried out nightly captures of mosquitoes on human baits in the presence and absence of the device. These captures were made during the rainy season in the localities of Zogbadjè and Mènontin. The captures were made under the same atmospheric conditions at the same locations at 5-day intervals. These captures were made twice per house, indoors and outdoors, with one blank capture without the device and one capture with the device. The captured mosquitoes were identified and classified by genus and their aggressiveness determined by calculating the biting rate. A total of 845 mosquitoes were captured during these captures with 296 mosquitoes captured indoors without the device and 132 mosquitoes with the device present. This represents a decrease of 55.40% in culicidae density. Furthermore, a significant decrease was observed in aggressiveness, from 49 to 22 bites per man per night (b/m/n) with the use of the device. This decrease is even more important for nocturnal species such as Anopheles spp. whose aggressiveness decreased by 90%. The present study confirms the effectiveness of the “Electron go out mosquito small lamp” in reducing Culicidae density and mosquito aggression even in the presence of chemotactic interference. However, this study was limited in time and focused only on the ability of the device to reduce mosquito numbers and did not assess its epidemiological efficacy. It is therefore important to extend the work to examine the influence of the use of this device on population health and the occurrence of mosquito-borne diseases, particularly malaria.

Effectiveness of Automatic Control over Flash Distillation Kettle for Liquid-Phase Bulk Polymerization of Propylene

Automatic control over flash distillation section at SINOPEC Cangzhou Refinery has been realized, resulting in saving of propylene feedstock and emission reduction to harvest significant economic benefits.

QUANTITATIVE CONTROL OF OPTICAL CLEARING EFFECTS STUDIED WITH TISSUE-LIKE PHANTOM

Tissue optical clearing by use of optical clearing agents(OCAs)has been proven to have potential to reduce the highly scattering effect of biological tissues in optical techniques.However,the difference in tissue samples could lead to unreliable results,making it difficult to quantitatively control the dose of OCAs during the course of tissue optical clearing.In this work,in order to study the effects of optical clearing,we customized tissue-like phantoms with optical properties of some biological tissue.Diffuse reflectance and total transmittance of tissue-like phantoms with different OCAs(DMSO or glycerol)and porcine skin tissues were measured.Then optical property parameters were calculated by inverse adding-doubling(IAD)algorithm.Results showed that OCAs could lead to a reduction in scattering of tissue-like phantoms as it did to porcine skin tissue in vitro.Furthermore,a series of relational expressions could be fit to quantitatively describe the relationship between the doses of OCAs and the reduction of scattering effects.Therefore,proper tissue-like phantom could facilitate optical clearing to be used in quantitative control of tissue optical properties,and further promote the application potential of optical clearing to light-based noninvasive diagnostic and therapeutic techniques.

Flatness Control Based on Dynamic Effective Matrix for Cold Strip Mills

Steel strips are the main of steel products and flatness is an important quality indicator of steel strips. Flatness control is the key and highly difficult technique of strip mills. The bottle-neck restricting the improvement of flatness control techniques is that the research on flatness theories and control mathematic models is not in accordance with the requirement of technique developments. To build a simple, rapid and accurate explicit formulation control model has become an urgent need for the development of flatness control technique. This paper puts forward the conception of dynamic effective matrix based on the effective matrix method for flatness control proposed by the authors under the consideration of the influence of the change of parameters in roiling processes on the effective matrix, and the concept is validated by industrial productions. Three methods of the effective matrix generation are induced： the calculation method based on the flatness prediction model; the calculation method based on the data excavation in rolling processes and the direct calculation method based on the network model. A fuzzy neural network effective matrix model is built based on the clusters, and then the network structure is optimized and the high-speed-calculation problem of the dynamic effective matrix is solved. The flatness control scheme for cold strip mills is proposed based on the dynamic effective matrix. On stand 5 of the 1 220 mm five-stand 4-high cold strip tandem mill, the industrial experiment with the control methods of tilting roll and bending roll is done by the control scheme of the static effective matrix and the dynamic effective matrix, respectively. The experiment result proves that the control effect of the dynamic effective matrix is much better than that of the static effective matrix. This paper proposes a new idea and method for the dynamic flatness control in the rolling processes of cold strip mills and develops the theory and model of the flatness control effective matrix method.

Doping effects of manganese on the catalytic performance and structure of NiMgO catalysts for controllabe synthesis of multi-walled carbon nanotubes

Doping effects of manganese （Mn） on catalytic performance and structure evolution of NiMgO catalysts for synthesis of multi-walled carbon nanotubes （MWCNTs） from methane were investigated for the first time. Addition of Mn in NiMgO catalyst can greatly improve the MWCNTs yield. Mno.2NiMgO catalyst among the tested ones gives the highest MWCNTs yield as 2244%, which is two times higher than that of the catalyst without Mn. The structure evolution, reduction behaviors and surface chemical properties of MnNiMgO catalysts with various Mn contents were studied in detail. It was found that the stable solid solution of NiMgO2 formed in NiMgO catalyst was disturbed by the addition of Mn. Instead, another solid solution of MnMg608 is formed. More amount of Ni can be reduced and dispersed on the catalyst surface to be acted as active sites. Importantly, the changes of Ni content on the surface are correlated with the Ni particle size and the outer diameter of MWCNTs, suggesting the controllable synthesis of MWCNTs over MnNiMgO catalysts.

Neural Network Based Terminal Sliding Mode Control for WMRs Affected by an Augmented Ground Friction With Slippage Effect

Wheeled mobile robots(WMRs) encounter unavoidable slippage especially on the low adhesion terrain such that the robots stability and accuracy are reduced greatly.To overcome this drawback,this article presents a neural network(NN) based terminal sliding mode control(TSMC) for WMRs where an augmented ground friction model is reported by which the uncertain friction can be estimated and compensated according to the required performance.In contrast to the existing friction models,the developed augmented ground friction model corresponds to actual fact because not only the effects associated with the mobile platform velocity but also the slippage related to the wheel slip rate are concerned simultaneously.Besides,the presented control approach can combine the merits of both TSMC and radial basis function(RBF) neural networks techniques,thereby providing numerous excellent performances for the closed-loop system,such as finite time convergence and faster friction estimation property.Simulation results validate the proposed friction model and robustness of controller;these research results will improve the autonomy and intelligence of WMRs,particularly when the mobile platform suffers from the sophisticated unstructured environment.

Control Effects of Jinggangmycin and Its Compounded Reagents against Rice Sheath Blight

The control effects of six kinds of reagents against rice sheath blight were compared in the test. The results showed that 24% thifluzamide SC 300 mL/hm2 and 20% Jinggangmycin ~ prochloraz WP 750 g/hm2 had good control effect against rice sheath blight, and their control effects after spraying for 7 and 14 d were 72.16%, 77.91% and 66.52%, 71.08%, respectively. The control effects of both reagents were significantly better than other test reagents and control re- agent Jinggangmycin, and they had no adverse effect on growth and development of rice. Considering from the aspects of control effect and economy, 20% Jinggang- mycin ~ prochloraz WP was suggested to be used to control rice sheath blight, its recommended dosage was 600 -750 g/hm2, and the reagent volume was 750kg with coarse spraying.

Aerodynamic Effects Compensation on Multi-Rotor UAVs Based on a Neural Network Control Allocation Approach

This paper shows that the aerodynamic effects can be compensated in a quadrotor system by means of a control allocation approach using neural networks.Thus,the system performance can be improved by replacing the classic allocation matrix,without using the aerodynamic inflow equations directly.The network training is performed offline,which requires low computational power.The target system is a Parrot MAMBO drone whose flight control is composed of PD-PID controllers followed by the proposed neural network control allocation algorithm.Such a quadrotor is particularly susceptible to the aerodynamics effects of interest to this work,because of its small size.We compared the mechanical torques commanded by the flight controller,i.e.,the control input,to those actually generated by the actuators and established at the aircraft.It was observed that the proposed neural network was able to closely match them,while the classic allocation matrix could not achieve that.The allocation error was also determined in both cases.Furthermore,the closed-loop performance also improved with the use of the proposed neural network control allocation,as well as the quality of the thrust and torque signals,in which we perceived a much less noisy behavior.

Analysis on influence of seismic travelling wave effect on semi-active control for long-span rigid-continuous bridge

The analysis approach of semi-active control for long-span rigid-continuous bridge under seismic travelling wave input is established. Magnetorheological dampers are set on the positions of the bridge beatings. The semi-active control calculation and analysis are performed for a five-span rigid-continuous bridge under seismic travelling waves with different apparent surface velocities. The results indicate that travelling wave effect remarkably influences the uncontrolled seismic responses, the semi-active control seismic responses and vibration control effects for the long-span rigid-continuous bridge. It is disadvantageous to the responses of the beams and the piers under the travelling wave input with lower apparent surface velocity, and travelling wave effect can decrease the vibration control effects evidently. Therefore, the travelling wave effect should be considered for the selection of the parameter values of semi-active control system in order to get the designing control effect.

Preliminary Study on Control Effects of Five Kinds of Fungicides against Wheat Scab

[Objective] This paper was to improve the current status that the fungicide carbendazim as the single agent was largely applied in the control against wheat scab. [ Method] Five kinds of fungicides on sales and new agents against wheat scab were selected for field trials. [ Result] 25% JS399 - 19 SC, 30% te- buconazoh · thiram WP, 75% trifloxystrobin · tebuconasole WDG and 10% ZJ0712 JG could effectively control wheat scab, and the control effects of one time or two times application were better than control agent carbendasim; the control efficacy of two times application was improved in different degrees against one time ap- vlication. [ Conclusion] The naner vrevided basis for the control atminst wheat scab.

Mosquito vector management with botanicals-the most effective weapons in controlling mosquito-borne diseases

Dear editor,Mosquito-borne diseases,viz.,malaria,filariasis,dengue hemorrhagic fever,chikungunya,Japanese encephalitis etc.,created huge impact on humans over the world,and the chemical insecticides remain the mainstay of effective control.But,indiscriminate and rampant use of the chemical insecticides in controlling mosquito vectors,in order to prevent diseases vectored by them,has resulted problems related to the adverse environmental effects for their(insecticides)potential toxicity,high operational cost,community acceptance,and the development of insecticide resistance among the vectors.The factors mentioned above prompted the search for new means of control strategies.Currently,the botanicals(viz.,plant extracts,essential oils and phytochemicals)with mosquitocidal potential

Sand control effect of HDPE sandbreak nets with different porosity structure

Straw checkerboard sand barriers with a porous structure that consists of a pervious upper portion and a dense lower portion are widely used to achieve great sand control effect.Considering this,and resolving the serious earth surface undercutting problem after HDPE sandbreak net checkboard barriers setting,the authors used HDPE(high-density polyethylene)materials to prepare new sandbreak materials with a similar porous structure.Through wind tunnel simulations and field sand control monitoring,we compared the sand control effect of three HDPE sandbreak nets with different porosity structure.Compared to the sandbreak net with uniform porosity structure,the three types of HDPE sandbreak nets with different porosity structure had poorer effect on reducing sand transport rates,but had longer effective protection distance before sandbreak nets at low wind velocity conditions(<12 m/s),longer effective protection distance at high wind velocity(>14 m/s)and longer effective protection distance between sandbreak nets at all experimental wind velocity conditions.Wind and sand control effect characteristics of HDPE sandbreak nets with different porosity structure provide an ideal material on semiburied checkerboard sand barriers for sand stabilization.By contrast,uniform-type sandbreak nets are used as materials on high upright sand fences for sand blocking.These HDPE sandbreak nets can be used to replace traditional sandbreak materials and have a very high potential for widespread and popular application in aeolian sand disaster control.

Evaluation of Control Effects against Sugarcane Pests：A New Sustained-release and Long-lasting Pesticide and Convenient and Efficient Pesticide Application Technology

[Objective]The paper was to screen a new ideal sustained-release,long-lasting and low-toxic pesticide and convenient and efficient pesticide application technology for controlling Ceratovacuna lanigera and Baliathrips serratus. [Method]2% Imidacloprid GR were selected and applied in the soil for field efficacy trial. [Result] The optimum dosage of 2% imidacloprid GR was 30 kg/hm^2（ active ingredient 600 g）,which can be mixed with fertilizer（ 30 kg pesticide and 40-80 kg fertilizer per hm^2） once combined with sugarcane planting management or big ridging during February and June. The control effects against C. lanigera and B. serratus could be more than 98. 2% and 81. 1%,respectively. The actual yield and sugar content in various pesticide treatments were increased by 33 390 kg/hm^2 and 6. 6% respectively compared to blank control. [Conclusion]2% imidacloprid GR has good control effects on C. lanigera and B. serratus. It is a new pesticide with ideal sustained-release,long-lasting and low-toxin effects against C. lanigera and B. serratus. Therefore,it could be used alternatively with other pesticides,to delay production and development of drug resistance.