In order to improve the crashworthiness of thin-walled columns, the energy absorption characteristics of three columns under quasi-static axial crushing loads were analyzed through LS-DYNA. Numerical results show that...In order to improve the crashworthiness of thin-walled columns, the energy absorption characteristics of three columns under quasi-static axial crushing loads were analyzed through LS-DYNA. Numerical results show that the energy absorption capability of the bitubular hexagonal columns with middle to middle(MTM) ribs is the best, followed by the bitubular hexagonal columns with corner to corner(CTC) ribs and the bitubular hexagonal columns without(NOT) ribs, respectively. Then, the MTM rib was optimized by using multi-objective particle swarm optimization algorithm. Through the analysis of the Pareto front for specific energy absorption(SEA, A_(se)) and peak crushing force(PCF, F_(pc)), it is found that there is a vertex on the Pareto front. The vertex has the design parameters of t_1=1.2 mm, t_2=1.2 mm, A_(se)=11.3729 k J/kg, F_(pc)=235.8491 kN. When the PCF is in a certain size, on the left of the vertex, the point with t_2=1.2 mm has the biggest SEA, meanwhile on the right of the vertex, the point with t_1=1.2 mm has the biggest SEA. Finally, the global sensitivity analysis was conducted to investigate the effect of two design parameters. The result is obtained that both SEA and PCF for MTM are more sensitive to t_1 rather than t_2 in the design domain.展开更多
In this paper, the S-frames, the front side rail structures of automobile, were investigated for crashworthihess. Various cross-sections including regular polygon, nonconvex polygon and multi-cell with inner stiffener...In this paper, the S-frames, the front side rail structures of automobile, were investigated for crashworthihess. Various cross-sections including regular polygon, nonconvex polygon and multi-cell with inner stiffener sections were investigated in terms of energy absorption of S-frames. It was determined through extensive numerical simulation that a multi-celI S-frame with double vertical internal stiffeners can absorb more energy than the other configurations. Shape optimization was also carried out to improve energy absorption of the S-frame with a rectangular section. The center composite design of experiment and the sequential response surface method （SRSM） were adopted to construct the approximate design sub-problem, which was then solved by the feasible direction method. An innovative double S- frame was obtained from the optimal result. The optimum configuration of the S-frame was crushed numerically and more plastic hinges as well as shear zones were observed during the crush process. The energy absorption efficiency of the structure with the optimal configuration was improved compared to the initial configuration.展开更多
基金Projects(U1334208,51405516,51275532)supported by the National Natural Science Foundation of ChinaProjects(2015ZZTS210,2015ZZTS045)supported by the Fundamental Research Funds for the Central Universities,China
文摘In order to improve the crashworthiness of thin-walled columns, the energy absorption characteristics of three columns under quasi-static axial crushing loads were analyzed through LS-DYNA. Numerical results show that the energy absorption capability of the bitubular hexagonal columns with middle to middle(MTM) ribs is the best, followed by the bitubular hexagonal columns with corner to corner(CTC) ribs and the bitubular hexagonal columns without(NOT) ribs, respectively. Then, the MTM rib was optimized by using multi-objective particle swarm optimization algorithm. Through the analysis of the Pareto front for specific energy absorption(SEA, A_(se)) and peak crushing force(PCF, F_(pc)), it is found that there is a vertex on the Pareto front. The vertex has the design parameters of t_1=1.2 mm, t_2=1.2 mm, A_(se)=11.3729 k J/kg, F_(pc)=235.8491 kN. When the PCF is in a certain size, on the left of the vertex, the point with t_2=1.2 mm has the biggest SEA, meanwhile on the right of the vertex, the point with t_1=1.2 mm has the biggest SEA. Finally, the global sensitivity analysis was conducted to investigate the effect of two design parameters. The result is obtained that both SEA and PCF for MTM are more sensitive to t_1 rather than t_2 in the design domain.
基金supported by the National Basic Research Programof China(2011CB610304)the National Natural Science Foundation of China(11172052)the National S&T Major Project(2012ZX04010-0114)
文摘In this paper, the S-frames, the front side rail structures of automobile, were investigated for crashworthihess. Various cross-sections including regular polygon, nonconvex polygon and multi-cell with inner stiffener sections were investigated in terms of energy absorption of S-frames. It was determined through extensive numerical simulation that a multi-celI S-frame with double vertical internal stiffeners can absorb more energy than the other configurations. Shape optimization was also carried out to improve energy absorption of the S-frame with a rectangular section. The center composite design of experiment and the sequential response surface method （SRSM） were adopted to construct the approximate design sub-problem, which was then solved by the feasible direction method. An innovative double S- frame was obtained from the optimal result. The optimum configuration of the S-frame was crushed numerically and more plastic hinges as well as shear zones were observed during the crush process. The energy absorption efficiency of the structure with the optimal configuration was improved compared to the initial configuration.
