Based on the analyses of the microstructures and phase diagrams of the TiAl-based alloy, the relationship among the composition, structure and mechanical properties of the B2-containing y-TiAI alloys was reviewed. The...Based on the analyses of the microstructures and phase diagrams of the TiAl-based alloy, the relationship among the composition, structure and mechanical properties of the B2-containing y-TiAI alloys was reviewed. The refinement of microstructures and improvement of mechanical properties of TiA1 alloy through stabilization of the β/B2 phase were reviewed. The mechanism of the superplastic behavior of the B2-containing y-TiAI alloys was discussed. With a reasonable addition of β-stabilizer, metastable B2 phase can be maintained, which is favorable for fine-grained structure and better high-temperature deformation behaviors. The mechanical properties of the B2-containing TiAI alloy, including the deformability and elevated temperature properties, can also be improved with doping elements and subsequent hot-working processes. The above mentioned researches discuss a new way for developing TiAI alloys with comprehensive properties, including good deformability and creep resistance.展开更多
The segregation and diffusion of boron during heat treatments were studied. The influence of boron contents, aging time and applied stress on FeMo2B2 formation was also studied. Finally, the effects of boron contents ...The segregation and diffusion of boron during heat treatments were studied. The influence of boron contents, aging time and applied stress on FeMo2B2 formation was also studied. Finally, the effects of boron contents and FeMo2B2 formation on the high temperature strength were studied. Boron atoms were segregated to prior austenite grain boundary during normalizing treatment. And these boron atoms were slowly diffused into the grain interior during tempering and aging at 700 ℃. The FeMo2B2 phase was only formed after 1,000 h aging at 700 ℃ in alloy containing 196 ppm boron. The formation of FeMo2B2 phase is accelerated by the applied stress. It was expected that the formation of FeMo2B2 is closely related to the redistribution of boron atoms. The tensile strengths at 700 ℃ are increased with the increase of boron contents. However, the formation of FeMo2B2 phase results in lower tensile strength.展开更多
ZTE Corporation announced on May 18, 2011 that it has won the world＇s first CDMA EV-DO Rev.B Phase 2 commercial contract from Indian telecom operator,Sistema Shyam TeleServices Ltd （SSTL）. SSTL operates its telecom...ZTE Corporation announced on May 18, 2011 that it has won the world＇s first CDMA EV-DO Rev.B Phase 2 commercial contract from Indian telecom operator,Sistema Shyam TeleServices Ltd （SSTL）. SSTL operates its telecom services ac＇ross India under the brand MrS and has over 11 million wireless customers. ZTE has also won the CDMA expansion contracts and EV-DO upgrade contracts for 10 circles of SSTL. The EV-DO Rev.B Phase 2 commercial launch will commence in Raiasthan.展开更多
This review summarizes the recent advances on the application of ^(57)Fe Mössbauer spectrometry to study the magnetic and phase characteristics of Nd–Fe–B-based permanent magnets. First of all, the hyperfine st...This review summarizes the recent advances on the application of ^(57)Fe Mössbauer spectrometry to study the magnetic and phase characteristics of Nd–Fe–B-based permanent magnets. First of all, the hyperfine structures of the Ce_(2)Fe_(14)B,(Ce,Nd)_(2)Fe_(14)B and MM_(2)Fe_(14)B phases are well-defined by using the model based on the Wigner-Seitz analysis of the crystal structure. The results show that the isomer shift δ and the quadrupole splitting öEQ of those 2:14:1 phases show minor changes with the Nd content, while the hyperfine field Bhfincreases monotonically with increasing Nd content and its value is influenced by the element segregation and phase separation in the 2:14:1 phase. Then, the hyperfine structures of the low fraction secondary phases are determined by the ^(57)Fe Mössbauer spectrometry due to its high sensitivity. On this basis,the content, magnetic behavior, and magnetization of the REFe_(2) phase, the amorphous grain boundary(GB) phase, and the amorphous worm-like phase, as well as their effects on the magnetic properties, are systematically studied.展开更多
In order to improve mechanical properties and optimize composition of TiAl-Nb alloys, Ti46 Al5 Nb0.1 B alloys with different contents of Fe(0, 0.3, 0.5, 0.7, 0.9, and 1.1 at.%) were prepared by melting. Macro/microstr...In order to improve mechanical properties and optimize composition of TiAl-Nb alloys, Ti46 Al5 Nb0.1 B alloys with different contents of Fe(0, 0.3, 0.5, 0.7, 0.9, and 1.1 at.%) were prepared by melting. Macro/microstructure and compression properties of the alloys were systematically investigated. Results show that Fe element can decrease the grain size, aggravate the Al-segregation and also form the Fe-rich B2 phase in the interdendritic area. Compressive testing results indicate that the Ti46 Al5 Nb0.1 B0.3 Fe alloy shows the highest ultimate compressive strength and fracture strain, which are 1869.5 MPa and 33.53%, respectively. The improved ultimate compression strength is ascribed to the grain refinement and solid solution strengthening of Fe, and the improved fracture strain is due to the reduced lattice tetragonality of γ phase and grain refinement of the alloys. However, excessive Fe addition decreases compressive strength and fracture strain, which is caused by the severe Al-segregation.展开更多
基金Project (2011CB605505) supported by the National Basic Research Program of ChinaProject (2011JQ002) supported by the Fundamental Research Funds for the Central Universities, China
文摘Based on the analyses of the microstructures and phase diagrams of the TiAl-based alloy, the relationship among the composition, structure and mechanical properties of the B2-containing y-TiAI alloys was reviewed. The refinement of microstructures and improvement of mechanical properties of TiA1 alloy through stabilization of the β/B2 phase were reviewed. The mechanism of the superplastic behavior of the B2-containing y-TiAI alloys was discussed. With a reasonable addition of β-stabilizer, metastable B2 phase can be maintained, which is favorable for fine-grained structure and better high-temperature deformation behaviors. The mechanical properties of the B2-containing TiAI alloy, including the deformability and elevated temperature properties, can also be improved with doping elements and subsequent hot-working processes. The above mentioned researches discuss a new way for developing TiAI alloys with comprehensive properties, including good deformability and creep resistance.
基金This work was financially supported by the Ministry of Commerce,Industry and Energy of Korea.
文摘The segregation and diffusion of boron during heat treatments were studied. The influence of boron contents, aging time and applied stress on FeMo2B2 formation was also studied. Finally, the effects of boron contents and FeMo2B2 formation on the high temperature strength were studied. Boron atoms were segregated to prior austenite grain boundary during normalizing treatment. And these boron atoms were slowly diffused into the grain interior during tempering and aging at 700 ℃. The FeMo2B2 phase was only formed after 1,000 h aging at 700 ℃ in alloy containing 196 ppm boron. The formation of FeMo2B2 phase is accelerated by the applied stress. It was expected that the formation of FeMo2B2 is closely related to the redistribution of boron atoms. The tensile strengths at 700 ℃ are increased with the increase of boron contents. However, the formation of FeMo2B2 phase results in lower tensile strength.
文摘ZTE Corporation announced on May 18, 2011 that it has won the world＇s first CDMA EV-DO Rev.B Phase 2 commercial contract from Indian telecom operator,Sistema Shyam TeleServices Ltd （SSTL）. SSTL operates its telecom services ac＇ross India under the brand MrS and has over 11 million wireless customers. ZTE has also won the CDMA expansion contracts and EV-DO upgrade contracts for 10 circles of SSTL. The EV-DO Rev.B Phase 2 commercial launch will commence in Raiasthan.
基金Project supported by the Zhejiang Provincial Natural Science Foundation of China(Grant Nos.LY20E010002,LR18E010001,and LD19E010001)the National Natural Science Foundation of China(Grant Nos.U1704253 and 51801047)+2 种基金Liaoning Revitalization Talents Program(Grant No.XLYC1807177)the Key Research and Development plan of Zhejiang Province,China(Grant No.2020C05014)Ten Thousand Talents Plan of Zhejiang Province,China(Grant No.2018R52003)。
文摘This review summarizes the recent advances on the application of ^(57)Fe Mössbauer spectrometry to study the magnetic and phase characteristics of Nd–Fe–B-based permanent magnets. First of all, the hyperfine structures of the Ce_(2)Fe_(14)B,(Ce,Nd)_(2)Fe_(14)B and MM_(2)Fe_(14)B phases are well-defined by using the model based on the Wigner-Seitz analysis of the crystal structure. The results show that the isomer shift δ and the quadrupole splitting öEQ of those 2:14:1 phases show minor changes with the Nd content, while the hyperfine field Bhfincreases monotonically with increasing Nd content and its value is influenced by the element segregation and phase separation in the 2:14:1 phase. Then, the hyperfine structures of the low fraction secondary phases are determined by the ^(57)Fe Mössbauer spectrometry due to its high sensitivity. On this basis,the content, magnetic behavior, and magnetization of the REFe_(2) phase, the amorphous grain boundary(GB) phase, and the amorphous worm-like phase, as well as their effects on the magnetic properties, are systematically studied.
基金Project(2017YFA0403802)supported by the National Key Research and Development Program of ChinaProject(51825401)supported by the National Natural Science Foundation of ChinaProject(2019TQ0076)supported by the China Postdoctoral Science Foundation。
文摘In order to improve mechanical properties and optimize composition of TiAl-Nb alloys, Ti46 Al5 Nb0.1 B alloys with different contents of Fe(0, 0.3, 0.5, 0.7, 0.9, and 1.1 at.%) were prepared by melting. Macro/microstructure and compression properties of the alloys were systematically investigated. Results show that Fe element can decrease the grain size, aggravate the Al-segregation and also form the Fe-rich B2 phase in the interdendritic area. Compressive testing results indicate that the Ti46 Al5 Nb0.1 B0.3 Fe alloy shows the highest ultimate compressive strength and fracture strain, which are 1869.5 MPa and 33.53%, respectively. The improved ultimate compression strength is ascribed to the grain refinement and solid solution strengthening of Fe, and the improved fracture strain is due to the reduced lattice tetragonality of γ phase and grain refinement of the alloys. However, excessive Fe addition decreases compressive strength and fracture strain, which is caused by the severe Al-segregation.
