Adaptive fuze-warhead coordination method based on BP artificial neural network

The appropriate fuze-warhead coordination method is important to improve the damage efficiency of air defense missiles against aircraft targets. In this paper, an adaptive fuze-warhead coordination method based on the Back Propagation Artificial Neural Network(BP-ANN) is proposed, which uses the parameters of missile-target intersection to adaptively calculate the initiation delay. The damage probabilities at different radial locations along the same shot line of a given intersection situation are calculated, so as to determine the optimal detonation position. On this basis, the BP-ANN model is used to describe the complex and highly nonlinear relationship between different intersection parameters and the corresponding optimal detonating point position. In the actual terminal engagement process, the fuze initiation delay is quickly determined by the constructed BP-ANN model combined with the missiletarget intersection parameters. The method is validated in the case of the single-shot damage probability evaluation. Comparing with other fuze-warhead coordination methods, the proposed method can produce higher single-shot damage probability under various intersection conditions, while the fuzewarhead coordination effect is less influenced by the location of the aim point.

Study on the Model of Excessive Staminate Catkin Thinning of Proterandrous Walnut Based on Quadratic Polynomial Regression Equation and BP Artificial Neural Network

The excessive staminate catkin thinning （emasculation） of proterandrous walnut is an important management measure for improving yield. To improve the excessive staminate catkin thinning efficiency, the model of quadratic polynomial regression equation and BP artificial neural network was developed. The effects of ethephon, gibberel in and mepiquat on shedding rate of staminate catkin of pro-terandrous walnut were investigated by modeling field test. Based on the modeling test results, the excessive staminate catkin thinning model of quadratic polynomial regression equation and BP artificial neural network was established, and it was validated by field test next year. The test data were divided into training set, vali-dation set and test set. The total 20 sets of data obtained from the modeling field test were randomly divided into training set （17） and validation set （3） by central composite design （quadric rotational regression test design）, and the data obtained from the next-year field test were divided into the test set. The topological struc-ture of BP artificial neural network was 3-5-1. The results showed that the pre-diction errors of BP neural network for samples from the validation set were 1.355 0%, 0.429 1% and 0.353 8%, respectively; the difference between the predicted value by the BP neural network and validated value by field test was 2.04%, and the difference between the predicted value by the regression equation and validated value by field test was 3.12%; the prediction accuracy of BP neural network was over 1.0% higher than that of regression equation. The effective combination of quadratic polynomial stepwise regression and BP artificial neural network wil not only help to determine the effect of independent parameter but also improve the prediction accuracy.

Prediction of 2A70 aluminum alloy flow stress based on BP artificial neural network

The hot deformation behavior of 2A70 aluminum alloy was investigated by means of isothermal compression tests performed on a Gleeble-1500 thermal simulator over 360～480 ℃ with strain rates in the range of 0.01～1 s-1 and the largest deformation up to 60%. On the basis of experiments, a BP artificial neural network （ANN） model was constructed to predict 2A70 aluminum alloy flow stress. True strain, strain rates and temperatures were input to the network, and flow stress was the only output. The comparison between predicted values and experimental data showed that the relative error for the trained model was less than ±3% for the sampled data while it was less than ±6% for the non-sampled data. Furthermore, the neural network model gives better results than nonlinear regression method. It is evident that the model constructed by BP ANN can be used to accurately predict the 2A70 alloy flow stress.

ARTIFICIAL NEURAL NETWORK MODEL OF CONSTITUTIVE RELATIONSHIP FOR 2A70 ALUMINUM ALLOY

The hat deformation behavior of 2A70 aluminum alloy was investigated by means of isothermal compression tests performed on a Gleeble-1500 thermal simulator over a wide range of temperatures 360-480℃ with strain rates of 0.01-1s^-1 and the largest deformation of 60%, and the true stress of the material was obtained under the above-mentioned conditions. The experimental results shows that 2A70 aluminum alloy is a kind of aluminum alloy with the property of dynamic recovery; its flow stress declines with the increase of temperature, while its flow stress increases with the increase of strain rates. On the basis of experiments, the constitutive relationship of the 2A70 aluminum alloy was constructed using a BP artificial neural network. Comparison of the predicted values with the experimental data shows that the relative error of the trained model is less than ±3% for the sampled data while it is less than ±6% for the nonsampled data. It is evident that the model constructed by BP ANN can accurately predict the flow stress of the 2A70 alloy.

Artificial Neural Network and Full Factorial Design Assisted AT-MRAM on Fe Oxides, Organic Materials, and Fe/Mn Oxides in Surficial Sediments

Artificial neural network（ANN） and full factorial design assisted atrazine（AT） multiple regression adsorption model（AT-MRAM） were developed to analyze the adsorption capability of the main components in the surficial sediments（SSs）. Artificial neural network was used to build a model（the determination coefficient square r2 is 0.9977） to describe the process of atrazine adsorption onto SSs, and then to predict responses of the full factorial design. Based on the results of the full factorial design, the interactions of the main components in SSs on AT adsorption were investigated through the analysis of variance（ANOVA）, F-test and t-test. The adsorption capability of the main components in SSs for AT was calculated via a multiple regression adsorption model（MRAM）. The results show that the greatest contribution to the adsorption of AT on a molar basis was attributed to Fe/Mn（–1.993 μmol/mol）. Organic materials（OMs） and Fe oxides in SSs are the important adsorption sites for AT, and the adsorption capabilities are 1.944 and 0.418 μmol/mol, respectively. The interaction among the non-residual components（Fe, Mn oxides and OMs） in SSs interferes in the adsorption of AT that shouldn’t be neglected, revealing the significant contribution of the interaction among non-residual components to controlling the behavior of AT in aquatic environments.

Characterization of grain growth behaviors by BP-ANN and Sellars models for nickle-base superalloy and their comparisons

In order to deeply understand the grain growth behaviors of Ni80A superalloy,a series of grain growth experiments were conducted at holding temperatures ranging from 1223 to 1423 K and holding time ranging from 0 to 3600 s.A back-propagation artificial neural network(BP-ANN)model and a Sellars model were solved based on the experimental data.The prediction and generalization capabilities of these two models were evaluated and compared on the basis of four statistical indicators.The results show that the solved BP-ANN model has better performance as it has higher correlation coefficient(r),lower average absolute relative error(AARE),lower absolute values of mean value(μ)and standard deviation(ω).Eventually,a response surface of average grain size to holding temperature and holding time is constructed based on the data expanded by the solved BP-ANN model,and the grain growth behaviors are described.

Feasibility of measuring moisture content of green sand by a low frequency multiprobe detector based on dielectric characteristics

Green sand is a mixture of silica sand,bentonite,water and coal powder,and other additives.Moisture content is an important index to characterize the properties of green sand.Based on the dielectric characteristics of green sand and transmission line theory,a method for rapidly measuring the moisture content of green sand by means of a low frequency multiprobe detector was proposed.A system was constructed,where six detectors with different arrangements and probes were designed.The experimental results showed that the voltage difference of transmission line increases with the increasing frequency before 29 MHz while decreases after 35 MHz.A voltage difference platform occurs in the range of 29-35 MHz,which is suitable for measuring the moisture content due to its insensitivity to frequency.The electric field intensity gradually decreases with the increase of the probe depth,and the intensity of central probe is always greater than that of the edge probe.When the distance of the probe away from the sand sample surface is 80 mm,the electric field intensity of the edge probe is found to be very weak.The optimal excitation frequency for measuring the moisture content of green sand is 29-33 MHz.The optimal detector is the one with one center probe and three edge probes,and their lengths are 80 mm and 60 mm,respectively.The distance between the center and edge probes is 25 mm,and the diameter of probes is 5 mm.Taking the voltage difference of transmission line,bentonite content,coal powder content and compactability as parameters of the input layer,and the moisture content as a parameter of the output layer,a three-layer BP artificial neural network model for predicting the moisture content of green sand was constructed according to the experimental results at 33 MHz.The prediction error of the model is not higher than 3.3% when the moisture content of green sand is within the range of 3wt.%-7wt.%.

Back-Propagation Artificial Neural Networks for Water Supply Pipeline Model

Water supply pipelines are the lifelines of a city. When pipelines burst, the burst site is difficult to locate by traditional methods such as manual tools or only by watching. In this paper, the burst site was identified using back-propagation (BP) artificial neural networks (ANN). The study is based on an indoor urban water supply model experiment. The key to appling BP ANN is to optimize the ANN's topological structure and learning parameters. This paper presents the optimizing method for a 3-layer BP neural network's topological structure and its learning parameters-learning ratio and the momentum factor. The indoor water supply pipeline model experimental results show that BP ANNs can be used to locate the burst point in urban water supply systems. The topological structure and learning parameters were optimized using the experimental results.

Forehead sEMG signal based HMI for hands-free control

A hands-free method is proposed to control an electric powered wheelchair （EPW） based on surface electromyography （sEMG） signals. A CyberLink device is deployed to obtain and analyze forehead sEMG signals generated by the facial movements. The autoregressive （AR） model is used to extract sEMG features. Then, the back-propagation artificial neural network （BPANN） is proposed to recognize different facial movement patterns and improved by Bayesian regularization and Levenberg-Marquardt （LM） algorithm. A sEMG based human-machine interface （HMI） is designed to map facial movement patterns into corresponding control commands. The experimental results show that the method is simple, real-time and have a high recognition rate.

Information integration research on cumulative effect of 'Siqi,Wuwei,and Guijing' in Traditional Chinese Medicine

OBJECTIVE:To study the morphological basis of the role of Siqi(cold as winter,cool as autumn,warm as spring,hot as summer),Wuwei(five flavors:sweet,pungent,salty,sour,and bitter),and Guijing(meridian tropism) through the use of information integration.METHODS:A14C-2-deoxy-glucose autoradiography method was adopted to determine the overall impact of treatment with 39 herbs on functions of various tissues and organs.Data was measured at 4hs after a single dose and following the last treatment of repeated doses for a week.Least-squares estimation was used and fitted for each herb regression effect of organs and tissues after singleand repeated treatment.The slope of the regression line represented the cumulative trend of the effect of the herbs(β),and the standard deviation of the slope(Sβ) was compared with those of the untreated animals(t 'test).All significantly cumulative effect trends were applied with an artificial neural network,which integrated the relationship among Siqi,Wuwei,and Guijing with tissues and organs.RESULTS:There is a certain relationship among the Siqi,Wuwei,Guijing and the anatomy of organs and tissues,but the different scores indicate that influence of Siqi,Wuwei,Guijing to anatomy of organs and tissues was a nonlinear state.CONCLUSION:Results demonstrated that the effects of Siqi,Wuwei,and Guijing have a morphological basis,and each concept was associated with multiple anatomical structures.