This paper presents two optimized rotors. The first rotor is as part of a 3-blade row optimization (IGV-rotor-stator) of a high-pressure compressor. It is based on modifying blade angles and advanced control of curvat...This paper presents two optimized rotors. The first rotor is as part of a 3-blade row optimization (IGV-rotor-stator) of a high-pressure compressor. It is based on modifying blade angles and advanced control of curvature of the airfoil camber line. The effects of these advanced blade techniques on the performance of the transonic 1.5-stage compressor were calculated using a 3D Navier-Stokes solver combined with a vortex/vorticity dynamics diagnosis method. The first optimized rotor produces a 3-blade row efficiency improvement over the baseline of 1.45% while also improving stall margin. The throttling range of the compressor is expanded largely because the shock in the rotor tip area is further downstream than that in the baseline case at the operating point. Additionally, optimizing the 3-blade row block while only adjusting the rotor geometry ensures good matching of flow angles allowing the compressor to have more range. The flow diagnostics of the rotor blade based on vortex/vorticity dynamics indicate that the boundary-layer separation behind the shock is verified by on-wall signatures of vorticity and skin-friction vector lines. In addition, azimuthal vorticity and boundary vorticity flux (BVF) are shown to be two vital flow parameters of compressor aerodynamic performance that directly relate to the improved performance of the optimized transonic compressor blade. A second rotor-only optimization is also presented for a 2.9 pressure ratio transonic fan. The objective function is the axial moment based on the BVF. An 88.5% efficiency rotor is produced.展开更多
Introduction Mechanotransduction has demonstrated potentials for tissue adaptation in vivo and in vitro. It is well documented that ultrasound,as a mechanical signal,can produce a wide variety of biological effects in...Introduction Mechanotransduction has demonstrated potentials for tissue adaptation in vivo and in vitro. It is well documented that ultrasound,as a mechanical signal,can produce a wide variety of biological effects in vitro and in vivo [1]. As an example,展开更多
文摘This paper presents two optimized rotors. The first rotor is as part of a 3-blade row optimization (IGV-rotor-stator) of a high-pressure compressor. It is based on modifying blade angles and advanced control of curvature of the airfoil camber line. The effects of these advanced blade techniques on the performance of the transonic 1.5-stage compressor were calculated using a 3D Navier-Stokes solver combined with a vortex/vorticity dynamics diagnosis method. The first optimized rotor produces a 3-blade row efficiency improvement over the baseline of 1.45% while also improving stall margin. The throttling range of the compressor is expanded largely because the shock in the rotor tip area is further downstream than that in the baseline case at the operating point. Additionally, optimizing the 3-blade row block while only adjusting the rotor geometry ensures good matching of flow angles allowing the compressor to have more range. The flow diagnostics of the rotor blade based on vortex/vorticity dynamics indicate that the boundary-layer separation behind the shock is verified by on-wall signatures of vorticity and skin-friction vector lines. In addition, azimuthal vorticity and boundary vorticity flux (BVF) are shown to be two vital flow parameters of compressor aerodynamic performance that directly relate to the improved performance of the optimized transonic compressor blade. A second rotor-only optimization is also presented for a 2.9 pressure ratio transonic fan. The objective function is the axial moment based on the BVF. An 88.5% efficiency rotor is produced.
基金supported by the NIH (R01 AR52379 & R01 AR49286),U S Army Medical Research and NSBRI
文摘Introduction Mechanotransduction has demonstrated potentials for tissue adaptation in vivo and in vitro. It is well documented that ultrasound,as a mechanical signal,can produce a wide variety of biological effects in vitro and in vivo [1]. As an example,
