In recent decades, many additives with different characteristics have been applied to strengthen and toughen Al2O3-based ceramic cutting tool materials. Among them, SiC whiskers and SiC nanoparticles showed excellent ...In recent decades, many additives with different characteristics have been applied to strengthen and toughen Al2O3-based ceramic cutting tool materials. Among them, SiC whiskers and SiC nanoparticles showed excellent performance in improving the material properties. While no attempts have been made to add SiC whiskers and SiC nanoparticles together into the ceramic matrix and the synergistically toughening effects of them have not been studied. An Al2O3-SiCw-SiC np advanced ceramic cutting tool material is fabricated by adding both one-dimensional SiC whiskers and zero-dimensional SiC nanoparticles into the Al2O3 matrix with an effective dispersing and mixing process. The composites with 25 vol% SiC whiskers and 25 vol% SiC nanoparticles alone are also investegated for comparison purposes. Results show that the Al2O3-SiCw-SiCnp composite with both 20 vo1% SiC whiskers and 5 vol% SiC nanoparticles additives have much improved mechanical properties. The flexural strength of Al2O3-SiCw-SiCnp is 730＋ 95 MPa and fracture toughness is 5.6 ± 0.6 MPa.m1/2. The toughening and strengthening mechanisms of SiC whiskers and nanoparticles are studied when they are added either individually or in combination. It is indicated that when SiC whiskers and nanoparticles are added together, the grains are further refined and homogenized, so that the microstructure and fracture mode ratio is modified. The SiC nanoparticles are found helpful to enhance the toughening effects of the SiC whiskers. The proposed research helps to enrich the types of ceramic cutting tool and is benefit to expand the application range of ceramic cutting tool.展开更多
Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around ...Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around 120 ℃, the P-E hysteresis loop and some ferroelectric domains. These experimental results indicate that the critical grain size for the disappearance of ferroelectricity in nanocrystalline BaTiO3 ceramics fabricated by pressure assisted sintering is below 30 nm. The ferroelectric property decreasing with decreasing grain size can be explained by the lowered tetragonality and the ＇dilution＇ effect of grain boundaries.展开更多
Barium titanate, BaTiO3 (BTO) is the most common ferro electric material, which is used to manufacture electronic components such as multilayer capacitors, positive temperature coefficient thermistors, piezo electric ...Barium titanate, BaTiO3 (BTO) is the most common ferro electric material, which is used to manufacture electronic components such as multilayer capacitors, positive temperature coefficient thermistors, piezo electric transdures, and ferro electric memory. Zr doped barium magnesium titanate (Ba0.9Mg1.0)(ZrxTi1-x)O3 (with x = 0.10, 0.20, 0.40 (BMZT 10, BMZT 20 and BMZT 40) perovskite is prepared by conventional solid state reaction method. The starting raw materials were BaCO3, TiO2, MgO and ZrO2. The XRD study at room temperature suggests that these have cubic and tetragonal symmetry phases. The behavior of the measured dielectric permittivity and dielectric loss with temperature and frequency reveals that the materials undergo a diffuse para-ferroelectric phase transition and are of the relaxor type. The crystal structure, surface morphology and dielectric properties of Zr and Mg doped barium titanate ceramics were investigated. Zr4+ and Mg2+ ions have entered the unit cell maintaining the perovskite structure of solid solution without the evidence of any additional phase when Mg content is 0.1 mole% and the Zr content is 0.10, 0.20 and 0.40 mole%.展开更多
(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly l...(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly limit their applications.Here,<00l>textured Nb5+-doped 0.8(Bi_(0.5)Na_(0.5))TiO_(3)–0.2(Bi_(0.5)K_(0.5))TiO_(3)(0.8BNT–0.2BKT)ceramics with a high degree of texturing(~80%)were prepared by the reactive template grain growth(RTGG)method using Bi4Ti3O12 as a template.By the combination of donor doping in the B-site and the RTGG method,the electrostrain performance achieves a significant enhancement.A high electrostrain of 0.65%and a piezoelectric coefficient(*33 d)of 1083 pm/V with reduced hysteresis at an electric field of 6 kV/mm are obtained.No electrostrain performance degradation is observed after unipolar electric field loading of 10^(5)cycles,showing excellent fatigue endurance.These results indicate that the texturing BNT-based lead-free piezoceramics by the RTGG method is a useful approach to developing eco-friendly actuators.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51175305)
文摘In recent decades, many additives with different characteristics have been applied to strengthen and toughen Al2O3-based ceramic cutting tool materials. Among them, SiC whiskers and SiC nanoparticles showed excellent performance in improving the material properties. While no attempts have been made to add SiC whiskers and SiC nanoparticles together into the ceramic matrix and the synergistically toughening effects of them have not been studied. An Al2O3-SiCw-SiC np advanced ceramic cutting tool material is fabricated by adding both one-dimensional SiC whiskers and zero-dimensional SiC nanoparticles into the Al2O3 matrix with an effective dispersing and mixing process. The composites with 25 vol% SiC whiskers and 25 vol% SiC nanoparticles alone are also investegated for comparison purposes. Results show that the Al2O3-SiCw-SiCnp composite with both 20 vo1% SiC whiskers and 5 vol% SiC nanoparticles additives have much improved mechanical properties. The flexural strength of Al2O3-SiCw-SiCnp is 730＋ 95 MPa and fracture toughness is 5.6 ± 0.6 MPa.m1/2. The toughening and strengthening mechanisms of SiC whiskers and nanoparticles are studied when they are added either individually or in combination. It is indicated that when SiC whiskers and nanoparticles are added together, the grains are further refined and homogenized, so that the microstructure and fracture mode ratio is modified. The SiC nanoparticles are found helpful to enhance the toughening effects of the SiC whiskers. The proposed research helps to enrich the types of ceramic cutting tool and is benefit to expand the application range of ceramic cutting tool.
文摘Dense nanocrystalline BaTiO3 ceramics with a homogeneous grain size of 30 nm was obtained by pressure assisted sintering. The ferroelectric behaviour of the ceramics was characterized by the dielectric peak at around 120 ℃, the P-E hysteresis loop and some ferroelectric domains. These experimental results indicate that the critical grain size for the disappearance of ferroelectricity in nanocrystalline BaTiO3 ceramics fabricated by pressure assisted sintering is below 30 nm. The ferroelectric property decreasing with decreasing grain size can be explained by the lowered tetragonality and the ＇dilution＇ effect of grain boundaries.
文摘Barium titanate, BaTiO3 (BTO) is the most common ferro electric material, which is used to manufacture electronic components such as multilayer capacitors, positive temperature coefficient thermistors, piezo electric transdures, and ferro electric memory. Zr doped barium magnesium titanate (Ba0.9Mg1.0)(ZrxTi1-x)O3 (with x = 0.10, 0.20, 0.40 (BMZT 10, BMZT 20 and BMZT 40) perovskite is prepared by conventional solid state reaction method. The starting raw materials were BaCO3, TiO2, MgO and ZrO2. The XRD study at room temperature suggests that these have cubic and tetragonal symmetry phases. The behavior of the measured dielectric permittivity and dielectric loss with temperature and frequency reveals that the materials undergo a diffuse para-ferroelectric phase transition and are of the relaxor type. The crystal structure, surface morphology and dielectric properties of Zr and Mg doped barium titanate ceramics were investigated. Zr4+ and Mg2+ ions have entered the unit cell maintaining the perovskite structure of solid solution without the evidence of any additional phase when Mg content is 0.1 mole% and the Zr content is 0.10, 0.20 and 0.40 mole%.
基金supported by the National Natural Science Foundation of China(52172135)the Youth Top Talent Project of the National“Ten Thousand Talents Program”(2021-527-07)the Guangdong Basic and Applied Basic Research Foundation for Distinguished Young Scholars(2021B1515020083 and 2022B1515020070).
文摘(Bi_(0.5)Na_(0.5))TiO_(3)(BNT)-based lead-free piezoceramics exhibit excellent electric field-induced strain(electrostrain)properties,but often suffer from large hysteresis and poor fatigue resistance,which strongly limit their applications.Here,<00l>textured Nb5+-doped 0.8(Bi_(0.5)Na_(0.5))TiO_(3)–0.2(Bi_(0.5)K_(0.5))TiO_(3)(0.8BNT–0.2BKT)ceramics with a high degree of texturing(~80%)were prepared by the reactive template grain growth(RTGG)method using Bi4Ti3O12 as a template.By the combination of donor doping in the B-site and the RTGG method,the electrostrain performance achieves a significant enhancement.A high electrostrain of 0.65%and a piezoelectric coefficient(*33 d)of 1083 pm/V with reduced hysteresis at an electric field of 6 kV/mm are obtained.No electrostrain performance degradation is observed after unipolar electric field loading of 10^(5)cycles,showing excellent fatigue endurance.These results indicate that the texturing BNT-based lead-free piezoceramics by the RTGG method is a useful approach to developing eco-friendly actuators.
