The design and construction of heterojunction photocatalysts,which possess a staggered energy band structure and appropriate interfacial contact,is an effective way to achieve outstanding photocatalytic performance.In...The design and construction of heterojunction photocatalysts,which possess a staggered energy band structure and appropriate interfacial contact,is an effective way to achieve outstanding photocatalytic performance.In this study,2D/2D BiOBr/g‐C_(3)N_(4)heterojunctions were successfully obtained by a convenient in situ self‐assembly route.Under simulated sunlight irradiation,99%of RhB(10 mg·L–1,100 mL)was efficiently degraded by 1.5‐BiOBr/g‐C_(3)N_(4)within 30 min,which is better than the performance of both BiOBr and g‐C_(3)N_(4),and it has superior stability.In addition,the composite also exhibits enhanced photocatalytic activity for H2 production.The enhanced activity can be attributed to the intimate interface contact,the larger surface area,and the highly efficient separation of photoinduced electron–hole pairs.Based on the experimental results,a novel S‐scheme model was proposed to illuminate the transfer process of charge carriers.This study presents a simple way to develop novel step‐scheme photocatalysts for environmental and related applications.展开更多
In this work,samples consisting of BiVO4 with exposed(040)facets coupled with Bi2S3(Bi2S3/BiVO4)were prepared through a one-pot hydrothermal method,using ethylenediaminetetraacetic acid as directing agent and L-cystei...In this work,samples consisting of BiVO4 with exposed(040)facets coupled with Bi2S3(Bi2S3/BiVO4)were prepared through a one-pot hydrothermal method,using ethylenediaminetetraacetic acid as directing agent and L-cysteine as sulfur source and soft template.X-ray diffraction,field emission scanning electron microscopy,and high-resolution transmission electron microscopy measurements indicated that the Bi2S3 content had a significant influence on the growth of(040)and(121)facets as well as on the morphology of the Bi2S3/BiVO4 samples.When the Bi2S3 content reached 1 mmol,the Bi2S3/BiVO4 samples exhibited a peony-like morphology.The results of transient photocurrent tests and electrochemical impedance spectroscopy measurements confirmed that a more effective charge separation and a faster interfacial charge transfer occurred in Bi2S3/BiVO4 than BiVO4.The enhanced photocatalytic activity of the Bi2S3/BiVO4 samples could be attributed to the improved absorption capability in the visible light region and the enhanced electron-hole pair separation efficiency due to the formation of the Bi2S3/BiVO4 heterostructure.In addition,the Bi2S3/BiVO4 samples showed relative stability and reusability.The simple method presented in this work could be used to fabricate composite photocatalysts with high activity for different applications,such as photocatalytic degradation of organic pollutants,photocatalytic splitting of water,and photocatalytic reduction of carbon dioxide.展开更多
Long-lasting phosphor Y2O2S ： Eu^3＋ , Mg^2＋ , Ti^4＋ was synthesized by a flux method and their luminescence properties were investigated. The result indicates that the unit cell parameter c is linearly increased w...Long-lasting phosphor Y2O2S ： Eu^3＋ , Mg^2＋ , Ti^4＋ was synthesized by a flux method and their luminescence properties were investigated. The result indicates that the unit cell parameter c is linearly increased with the increase of Eu2O3 content in Y2O2S： Eu^3＋ （0.01 ≤ x ≤0.10）. On the other hand, the change of unit cell parameter a is not linear dependence. In the Y2O2S： Eu^3 ＋ crystal structure, Eu^3＋ ions only replaced Y^3 ＋ ions＇ places in which it posited center position of c axis. With the increase of Eu2O3 content, the position of the strongest emission peak changed from 540 nm （5D1→^ 7F2 transition） to 626 nm （^5Do→^7TF2 transition）, and the maximum intensity was obtained when x = 0.09 in Y2O2S： Eu^3＋ （0.01 ≤x ≤0.10）. This is due to the environment of trivalent europium in the crystal structure of Y2O2S. Doping with Mg^2＋ or Ti^4＋. ions alone cannot get the good long-lasting afterglow effect, whereas co-doping with Mg^2 ＋ and Ti^4 ＋ ions and excited with 365 nm ultraviolet light, a strong thermoluminesence peak appeared, red and orange long-lasting phosphorescence （LLP） was also observed and the phosphorescence lasted nearly 3 h in the light perception of the dark-adapted human eye （0.32 mcd·m^-2）. Thus the LLP mechanism was analyzed.展开更多
Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalyst...Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalysts need to be developed.Here,ZnIn2S4/SnS2 with a three-dimensional(3D)heterostructure was prepared by a hydrothermal method and its photocatalytic performance in Cr(VI)reduction was investigated.When the mass ratio of SnS2 to ZnIn2S4 is 1:10,the ZnIn2S4/SnS2 composite exhibits the highest photocatalytic activity with 100%efficiency for Cr(VI)(50 mg/L)reduction within 70 min under visible-light irradiation,which is much higher than those of pure ZnIn2S4 and SnS2.The enhanced charge separation and the light absorption have been confirmed from the photoluminescence and UV-vis absorption spectra to be the two reasons for the increased activity towards photocatalytic Cr(VI)reduction.In addition,after three cycles of testing,no obvious degradation is observed with the 3D heterostructured ZnIn2S4/SnS2,which maintains a good photocatalytic stability.展开更多
Y2O2S：Sm^3＋, Mg^2＋, Ti^4＋ phosphor was synthesized by co-precipitation method. The crystalline structure of all synthesized phosphors was investigated by XRD. The result showed that all synthesized phosphors had a...Y2O2S：Sm^3＋, Mg^2＋, Ti^4＋ phosphor was synthesized by co-precipitation method. The crystalline structure of all synthesized phosphors was investigated by XRD. The result showed that all synthesized phosphors had a hexagonal crystal structure, which was the same as Y2O2S. The emission spectrum and excitation spectrum were measured, and the effect of Sm^3 ＋ molar ratio on the spectra was discussed. The emission spectra of the phosphors showed three emission peaks due to typical transitions of Sm^3 ＋ （4G5/2→6HJ ,J = 5/2, 7/2, 9/2）, and the emission peaks at 606 nm was stronger than others. With the increase of Sm^3 ＋ molar ratio, the emission intensity was strengthened. The excitation peaks were ascribed to the representative energy transition 4f→4f of Ti^4＋ phosphor prepared by co-precipitation method was Sm^3＋ ions. The results indicated that the Y2O2S ： Sm^3＋ , Mg^2＋ , an efficient long afterglow phosphor.展开更多
Construction of multi-channels of photo-carrier migration in photocatalysts is favor to boost conversion efficiency of solar energy by promoting the charge separation and transfer.Herein,a ternary ZnIn_(2)S_(4)/g-C_(3...Construction of multi-channels of photo-carrier migration in photocatalysts is favor to boost conversion efficiency of solar energy by promoting the charge separation and transfer.Herein,a ternary ZnIn_(2)S_(4)/g-C_(3)N_(4)/Ti_(3)C_(2) MXene hybrid composed of S-scheme junction integrated Schottky-junction was fabricated using a simple hydrothermal approach.All the components(g-C_(3)N_(4),ZnIn_(2)S_(4) and Ti_(3)C_(2) MXene)demonstrated two-dimensional(2D)nanosheets structure,leading to the formation of a 2D/2D/2D sandwich-like structure with intimate large interface for carrier migration.Furthermore,the photogenerated carriers on the g-C_(3)N_(4) possessed dual transfer channels,including one route in S-scheme transfer mode between the g-C_(3)N_(4) and ZnIn_(2)S_(4) and the other route in Schottky-junction between g-C_(3)N_(4) and Ti_(3)C_(2) MXene.Consequently,a highly efficient carrier separation and transport was realized in the ZnIn_(2)S_(4)/g-C_(3)N_(4)/Ti_(3)C_(2) MXene heterojunction.This ternary sample exhibited wide light response from 200 to 1400 nm and excellent photocatalytic H_(2) evolution of 2452.1μmol∙g^(–1)∙h^(–1),which was 200,3,1.5 and 1.6 times of g-C_(3)N_(4),ZnIn_(2)S_(4),ZnIn_(2)S_(4)/Ti_(3)C_(2) MXene and g-C_(3)N_(4)/ZnIn_(2)S_(4) binary composites.This work offers a paradigm for the rational construction of multi-electron pathways to regulate the charge separation and migration via the introduction of dual-junctions in catalytic system.展开更多
基金National Natural Science Foundation of China(12175254,U1832119)National Key R&D Program of China(2021YFE0104800)+2 种基金International Partnership Program of Chinese Academy of Sciences(121631KYSB20200039)International Cooperation Project of Shanghai Science and Technology Commission(20520750200)National Centre for Research and Development(WPC2/1/SCAPOL/2021)。
文摘The design and construction of heterojunction photocatalysts,which possess a staggered energy band structure and appropriate interfacial contact,is an effective way to achieve outstanding photocatalytic performance.In this study,2D/2D BiOBr/g‐C_(3)N_(4)heterojunctions were successfully obtained by a convenient in situ self‐assembly route.Under simulated sunlight irradiation,99%of RhB(10 mg·L–1,100 mL)was efficiently degraded by 1.5‐BiOBr/g‐C_(3)N_(4)within 30 min,which is better than the performance of both BiOBr and g‐C_(3)N_(4),and it has superior stability.In addition,the composite also exhibits enhanced photocatalytic activity for H2 production.The enhanced activity can be attributed to the intimate interface contact,the larger surface area,and the highly efficient separation of photoinduced electron–hole pairs.Based on the experimental results,a novel S‐scheme model was proposed to illuminate the transfer process of charge carriers.This study presents a simple way to develop novel step‐scheme photocatalysts for environmental and related applications.
文摘In this work,samples consisting of BiVO4 with exposed(040)facets coupled with Bi2S3(Bi2S3/BiVO4)were prepared through a one-pot hydrothermal method,using ethylenediaminetetraacetic acid as directing agent and L-cysteine as sulfur source and soft template.X-ray diffraction,field emission scanning electron microscopy,and high-resolution transmission electron microscopy measurements indicated that the Bi2S3 content had a significant influence on the growth of(040)and(121)facets as well as on the morphology of the Bi2S3/BiVO4 samples.When the Bi2S3 content reached 1 mmol,the Bi2S3/BiVO4 samples exhibited a peony-like morphology.The results of transient photocurrent tests and electrochemical impedance spectroscopy measurements confirmed that a more effective charge separation and a faster interfacial charge transfer occurred in Bi2S3/BiVO4 than BiVO4.The enhanced photocatalytic activity of the Bi2S3/BiVO4 samples could be attributed to the improved absorption capability in the visible light region and the enhanced electron-hole pair separation efficiency due to the formation of the Bi2S3/BiVO4 heterostructure.In addition,the Bi2S3/BiVO4 samples showed relative stability and reusability.The simple method presented in this work could be used to fabricate composite photocatalysts with high activity for different applications,such as photocatalytic degradation of organic pollutants,photocatalytic splitting of water,and photocatalytic reduction of carbon dioxide.
文摘Long-lasting phosphor Y2O2S ： Eu^3＋ , Mg^2＋ , Ti^4＋ was synthesized by a flux method and their luminescence properties were investigated. The result indicates that the unit cell parameter c is linearly increased with the increase of Eu2O3 content in Y2O2S： Eu^3＋ （0.01 ≤ x ≤0.10）. On the other hand, the change of unit cell parameter a is not linear dependence. In the Y2O2S： Eu^3 ＋ crystal structure, Eu^3＋ ions only replaced Y^3 ＋ ions＇ places in which it posited center position of c axis. With the increase of Eu2O3 content, the position of the strongest emission peak changed from 540 nm （5D1→^ 7F2 transition） to 626 nm （^5Do→^7TF2 transition）, and the maximum intensity was obtained when x = 0.09 in Y2O2S： Eu^3＋ （0.01 ≤x ≤0.10）. This is due to the environment of trivalent europium in the crystal structure of Y2O2S. Doping with Mg^2＋ or Ti^4＋. ions alone cannot get the good long-lasting afterglow effect, whereas co-doping with Mg^2 ＋ and Ti^4 ＋ ions and excited with 365 nm ultraviolet light, a strong thermoluminesence peak appeared, red and orange long-lasting phosphorescence （LLP） was also observed and the phosphorescence lasted nearly 3 h in the light perception of the dark-adapted human eye （0.32 mcd·m^-2）. Thus the LLP mechanism was analyzed.
基金the support of the National Natural Science Foundation of China (51702087 and 21673066)~~
文摘Photocatalytic method has been intensively explored for Cr(VI)reduction owing to its efficient and environmentally friendly natures.In order to obtain a high efficiency in practical application,efficient photocatalysts need to be developed.Here,ZnIn2S4/SnS2 with a three-dimensional(3D)heterostructure was prepared by a hydrothermal method and its photocatalytic performance in Cr(VI)reduction was investigated.When the mass ratio of SnS2 to ZnIn2S4 is 1:10,the ZnIn2S4/SnS2 composite exhibits the highest photocatalytic activity with 100%efficiency for Cr(VI)(50 mg/L)reduction within 70 min under visible-light irradiation,which is much higher than those of pure ZnIn2S4 and SnS2.The enhanced charge separation and the light absorption have been confirmed from the photoluminescence and UV-vis absorption spectra to be the two reasons for the increased activity towards photocatalytic Cr(VI)reduction.In addition,after three cycles of testing,no obvious degradation is observed with the 3D heterostructured ZnIn2S4/SnS2,which maintains a good photocatalytic stability.
基金Project supported by the Hebei Developing Foundation of Science&Technology (51215103b)
文摘Y2O2S：Sm^3＋, Mg^2＋, Ti^4＋ phosphor was synthesized by co-precipitation method. The crystalline structure of all synthesized phosphors was investigated by XRD. The result showed that all synthesized phosphors had a hexagonal crystal structure, which was the same as Y2O2S. The emission spectrum and excitation spectrum were measured, and the effect of Sm^3 ＋ molar ratio on the spectra was discussed. The emission spectra of the phosphors showed three emission peaks due to typical transitions of Sm^3 ＋ （4G5/2→6HJ ,J = 5/2, 7/2, 9/2）, and the emission peaks at 606 nm was stronger than others. With the increase of Sm^3 ＋ molar ratio, the emission intensity was strengthened. The excitation peaks were ascribed to the representative energy transition 4f→4f of Ti^4＋ phosphor prepared by co-precipitation method was Sm^3＋ ions. The results indicated that the Y2O2S ： Sm^3＋ , Mg^2＋ , an efficient long afterglow phosphor.
文摘Construction of multi-channels of photo-carrier migration in photocatalysts is favor to boost conversion efficiency of solar energy by promoting the charge separation and transfer.Herein,a ternary ZnIn_(2)S_(4)/g-C_(3)N_(4)/Ti_(3)C_(2) MXene hybrid composed of S-scheme junction integrated Schottky-junction was fabricated using a simple hydrothermal approach.All the components(g-C_(3)N_(4),ZnIn_(2)S_(4) and Ti_(3)C_(2) MXene)demonstrated two-dimensional(2D)nanosheets structure,leading to the formation of a 2D/2D/2D sandwich-like structure with intimate large interface for carrier migration.Furthermore,the photogenerated carriers on the g-C_(3)N_(4) possessed dual transfer channels,including one route in S-scheme transfer mode between the g-C_(3)N_(4) and ZnIn_(2)S_(4) and the other route in Schottky-junction between g-C_(3)N_(4) and Ti_(3)C_(2) MXene.Consequently,a highly efficient carrier separation and transport was realized in the ZnIn_(2)S_(4)/g-C_(3)N_(4)/Ti_(3)C_(2) MXene heterojunction.This ternary sample exhibited wide light response from 200 to 1400 nm and excellent photocatalytic H_(2) evolution of 2452.1μmol∙g^(–1)∙h^(–1),which was 200,3,1.5 and 1.6 times of g-C_(3)N_(4),ZnIn_(2)S_(4),ZnIn_(2)S_(4)/Ti_(3)C_(2) MXene and g-C_(3)N_(4)/ZnIn_(2)S_(4) binary composites.This work offers a paradigm for the rational construction of multi-electron pathways to regulate the charge separation and migration via the introduction of dual-junctions in catalytic system.
