The submerged arc brazing method was used to connect the tin-based babbit alloy with the steel matrix.The microstructure of the submerged arc brazed Babbitt interface layer on the surface of Q235B steel was analyzed b...The submerged arc brazing method was used to connect the tin-based babbit alloy with the steel matrix.The microstructure of the submerged arc brazed Babbitt interface layer on the surface of Q235B steel was analyzed by OM,SEM and EDS and the hardness properties of the joint interface layer were tested by MH-5 microhardness tester.the result of research shows that a layer of canine-shaped intermetallic compound with uneven thickness is formed at the interface,and the thickness is 10–20μm.The interface layer includes two kinds of compound layers,namely the FeSn layer near the side of the steel substrate and FeSn2 layer near the side of the babbit.During the interfacial reaction process,Fe atoms in the steel matrix dissolve into the liquid babbit alloy and form a certain concentration gradient at the interface.The farther from the interface,the lower the Fe atom concentration.The growth of Gibbs free energy of FeSn is lower when the temperature is above 780.15 K,and the temperature during the welding process is much higher than 780.15 K,moreover the precipitation temperature of FeSn is higher.Therefore,in the subsequent cooling process,FeSn is first precipitated from the interface near the side of steel matrix and then FeSn2 is precipitated from the interface near the side of babbit alloy.Microhardness test showed that the intermetallic compound at the interface layer significantly improved the hardness properties.展开更多
基金supported by the University Natural Science Research Project of Jiangsu Province(Grant No.15KJA460006)
文摘The submerged arc brazing method was used to connect the tin-based babbit alloy with the steel matrix.The microstructure of the submerged arc brazed Babbitt interface layer on the surface of Q235B steel was analyzed by OM,SEM and EDS and the hardness properties of the joint interface layer were tested by MH-5 microhardness tester.the result of research shows that a layer of canine-shaped intermetallic compound with uneven thickness is formed at the interface,and the thickness is 10–20μm.The interface layer includes two kinds of compound layers,namely the FeSn layer near the side of the steel substrate and FeSn2 layer near the side of the babbit.During the interfacial reaction process,Fe atoms in the steel matrix dissolve into the liquid babbit alloy and form a certain concentration gradient at the interface.The farther from the interface,the lower the Fe atom concentration.The growth of Gibbs free energy of FeSn is lower when the temperature is above 780.15 K,and the temperature during the welding process is much higher than 780.15 K,moreover the precipitation temperature of FeSn is higher.Therefore,in the subsequent cooling process,FeSn is first precipitated from the interface near the side of steel matrix and then FeSn2 is precipitated from the interface near the side of babbit alloy.Microhardness test showed that the intermetallic compound at the interface layer significantly improved the hardness properties.
