Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-...Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.展开更多
A new type of soft X-ray source, i.e. a plasma-based X-ray laser, is found to be promising to conduct transient measurement. By means of picosecond X-ray laser speckles, the dynamic microscopic polarization clusters w...A new type of soft X-ray source, i.e. a plasma-based X-ray laser, is found to be promising to conduct transient measurement. By means of picosecond X-ray laser speckles, the dynamic microscopic polarization clusters within cubic (paraelectric) BaTiO3 was directly observed and characterized in a microscopic scale for the first time. This opens a way to study this type of clusters, which usually manifest large external-field response for ferroelectric materials.展开更多
This paper introduces the base-X notation and discusses the conversion between numbers of different bases. It also introduces the tri-value logic that is associated with the base-3 system.
To evaluate the residual stress in TiAl based alloys by X ray diffraction, X ray elastic constants (REC) of a γ TiAl alloy were determined. From these results, the stress state of a given phase in a duplex TiAl based...To evaluate the residual stress in TiAl based alloys by X ray diffraction, X ray elastic constants (REC) of a γ TiAl alloy were determined. From these results, the stress state of a given phase in a duplex TiAl based alloy under a uniaxial tensile loading has been characterized by X ray diffraction. The results show that the X ray elastic constants and the microscopic stresses of the given phase are different from the apparent elastic constants and the macroscopic stresses of the alloy. The reason of the different distribution of the alloy was also discussed. [展开更多
The microstmcture evolution of plastic-bonded explosives （PBXs） after thermal stimulus plays a key role in PBX performance. In this paper, the nanoscale pores of thermal-treated octahydro-1,3,5,7-tetranitro-1,3,5,7 ...The microstmcture evolution of plastic-bonded explosives （PBXs） after thermal stimulus plays a key role in PBX performance. In this paper, the nanoscale pores of thermal-treated octahydro-1,3,5,7-tetranitro-1,3,5,7 tetrazocine （HMX）- based PBXs with different HMX particle sizes [approximately 40 （FLIP） and 100 μm （LHP）] were measured using small- angle X-ray scattering （SAXS）. No obvious pore variations were found in the LHP samples heated at 160 ℃ for 6 h, whereas the amount of pores of FHP decreased when subjected to 160 ℃ for 6 h. At 180 ℃, the average pore radii of FHP and LHP decreased from approximately 45 nm to 25 nm, and the total pore volume increased distinctively because of phase transformation. The LHP sample reached a high level of pore content after being held at 180 ℃ for 1 h, whereas FHP required 3 h. Both FHP and LHP had relatively high pore volumes when subjected to 200 ℃ for 1 and 3 h.展开更多
文章对海上风电各国总体发展现状及未来发展趋势进行分析,表明各国都在加强对海上风电开发利用,但随着海上风电高速发展,有限的近海风电资源开发趋于饱和,深远海域风电成为海上风电未来发展的方向。然而水深离岸远,深远海风能开发困难,...文章对海上风电各国总体发展现状及未来发展趋势进行分析,表明各国都在加强对海上风电开发利用,但随着海上风电高速发展,有限的近海风电资源开发趋于饱和,深远海域风电成为海上风电未来发展的方向。然而水深离岸远,深远海风能开发困难,难于实现商业化。文章介绍了一种将新能源电力转换为其他能源载体的Power to X模式。氢作为1种可再生能源载体,可基于Power to X模式,通过将新能源电力电解水制氢的方式,有效降低深远海风电的成本。展开更多
基金Supported by Partially funded by FESR P.O.Apulia Region 2007-2013-Action 1.2.4,No.3Q5AX31
文摘Effective prevention and management of osteoporosis would require suitable methods for population screenings and early diagnosis. Current clinicallyavailable diagnostic methods are mainly based on the use of either X-rays or ultrasound(US). All X-ray based methods provide a measure of bone mineral density(BMD), but it has been demonstrated that other structural aspects of the bone are important in determining fracture risk, such as mechanical features and elastic properties, which cannot be assessed using densitometric techniques. Among the most commonly used techniques, dual X-ray absorptiometry(DXA) is considered the current 'gold standard' for osteoporosis diagnosis and fracture risk prediction. Unfortunately, as other X-ray based techniques, DXA has specific limitations(e.g., use of ionizing radiation, large size of the equipment, high costs, limited availability) that hinder its application for population screenings and primary care diagnosis. This has resulted in an increasing interest in developing reliable pre-screening tools for osteoporosis such as quantitative ultrasound(QUS) scanners, which do not involve ionizing radiation exposure and represent a cheaper solution exploiting portable and widely available devices. Furthermore, the usefulness of QUS techniques in fracture risk prediction has been proven and, with the last developments, they are also becoming a more and more reliable approach for assessing bone quality. However, the US assessment of osteoporosis is currently used only as a pre-screening tool, requiring a subsequent diagnosis confirmation by means of a DXA evaluation. Here we illustrate the state of art in the early diagnosis of this 'silent disease' and show up recent advances for its prevention and improved management through early diagnosis.
文摘A new type of soft X-ray source, i.e. a plasma-based X-ray laser, is found to be promising to conduct transient measurement. By means of picosecond X-ray laser speckles, the dynamic microscopic polarization clusters within cubic (paraelectric) BaTiO3 was directly observed and characterized in a microscopic scale for the first time. This opens a way to study this type of clusters, which usually manifest large external-field response for ferroelectric materials.
文摘This paper introduces the base-X notation and discusses the conversion between numbers of different bases. It also introduces the tri-value logic that is associated with the base-3 system.
文摘To evaluate the residual stress in TiAl based alloys by X ray diffraction, X ray elastic constants (REC) of a γ TiAl alloy were determined. From these results, the stress state of a given phase in a duplex TiAl based alloy under a uniaxial tensile loading has been characterized by X ray diffraction. The results show that the X ray elastic constants and the microscopic stresses of the given phase are different from the apparent elastic constants and the macroscopic stresses of the alloy. The reason of the different distribution of the alloy was also discussed. [
基金supported by the National Natural Science Foundation of China(Grant Nos.11205137,11079043,and 11302199)
文摘The microstmcture evolution of plastic-bonded explosives （PBXs） after thermal stimulus plays a key role in PBX performance. In this paper, the nanoscale pores of thermal-treated octahydro-1,3,5,7-tetranitro-1,3,5,7 tetrazocine （HMX）- based PBXs with different HMX particle sizes [approximately 40 （FLIP） and 100 μm （LHP）] were measured using small- angle X-ray scattering （SAXS）. No obvious pore variations were found in the LHP samples heated at 160 ℃ for 6 h, whereas the amount of pores of FHP decreased when subjected to 160 ℃ for 6 h. At 180 ℃, the average pore radii of FHP and LHP decreased from approximately 45 nm to 25 nm, and the total pore volume increased distinctively because of phase transformation. The LHP sample reached a high level of pore content after being held at 180 ℃ for 1 h, whereas FHP required 3 h. Both FHP and LHP had relatively high pore volumes when subjected to 200 ℃ for 1 and 3 h.
文摘文章对海上风电各国总体发展现状及未来发展趋势进行分析,表明各国都在加强对海上风电开发利用,但随着海上风电高速发展,有限的近海风电资源开发趋于饱和,深远海域风电成为海上风电未来发展的方向。然而水深离岸远,深远海风能开发困难,难于实现商业化。文章介绍了一种将新能源电力转换为其他能源载体的Power to X模式。氢作为1种可再生能源载体,可基于Power to X模式,通过将新能源电力电解水制氢的方式,有效降低深远海风电的成本。
