In order to perform the studies on a pulsed beam generation system based on a high intensity cyclotron, a test beam line with a pulsed beam generation for a 10 MeV compact cyclotron (CYCIAE-10) has been designed and c...In order to perform the studies on a pulsed beam generation system based on a high intensity cyclotron, a test beam line with a pulsed beam generation for a 10 MeV compact cyclotron (CYCIAE-10) has been designed and constructed at China Institute of Atomic Energy (CIAE). A 70 MHz continuous H- beam can be pulsed to the pulse length of less than 10 ns with a repetition rate of 4.4 MHz. The sine waveform with a frequency of 2.2 MHz is adopted for the chopper and a mesh structure with single drift and dual gaps is used for the 70 MHz buncher. A helical resonator is designed and constructed based on simulations and experiments on the RF matching for the chopper. A helical inductance loop that is exceptionally large of its kind and equipped with water cooling for the resonator has been successfully wound and a 500 W solid RF amplifier has been manufactured. A special measuring device has been designed, which can be used to measure both the DC beam and the pulsed beam. The required pulsed beam was obtained after pulsed beam tuning.展开更多
The design of CSNS MEBT has two objectives：（1） to match the beam both in the transversal direction and the longitudinal direction from RFQ into DTL;（2） to further chop the beam into the required time structure as...The design of CSNS MEBT has two objectives：（1） to match the beam both in the transversal direction and the longitudinal direction from RFQ into DTL;（2） to further chop the beam into the required time structure asked by RCS. It is very diffcult and critical to control well the emittance growth and in the meantime to match and chop the beam. Firstly,the optical design is done and optimized,and the multi-particle simulations show that the maximum emittance growth is successfully controlled within 14%. Secondly,based on the different beam envelopes obtained by TRACE-3D and PARMELA,the least deflecting angle of the chopper is determined by TRACE-3D. At last,the field of steering magnet is determined through simulations.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 10775186)
文摘In order to perform the studies on a pulsed beam generation system based on a high intensity cyclotron, a test beam line with a pulsed beam generation for a 10 MeV compact cyclotron (CYCIAE-10) has been designed and constructed at China Institute of Atomic Energy (CIAE). A 70 MHz continuous H- beam can be pulsed to the pulse length of less than 10 ns with a repetition rate of 4.4 MHz. The sine waveform with a frequency of 2.2 MHz is adopted for the chopper and a mesh structure with single drift and dual gaps is used for the 70 MHz buncher. A helical resonator is designed and constructed based on simulations and experiments on the RF matching for the chopper. A helical inductance loop that is exceptionally large of its kind and equipped with water cooling for the resonator has been successfully wound and a 500 W solid RF amplifier has been manufactured. A special measuring device has been designed, which can be used to measure both the DC beam and the pulsed beam. The required pulsed beam was obtained after pulsed beam tuning.
文摘The design of CSNS MEBT has two objectives：（1） to match the beam both in the transversal direction and the longitudinal direction from RFQ into DTL;（2） to further chop the beam into the required time structure asked by RCS. It is very diffcult and critical to control well the emittance growth and in the meantime to match and chop the beam. Firstly,the optical design is done and optimized,and the multi-particle simulations show that the maximum emittance growth is successfully controlled within 14%. Secondly,based on the different beam envelopes obtained by TRACE-3D and PARMELA,the least deflecting angle of the chopper is determined by TRACE-3D. At last,the field of steering magnet is determined through simulations.
