Artificial neural networks （ANNs） and genetic programming （GP） have recently been used for the estimation of hydraulic data. In this study, they were used as alternative tools to estimate the characteristics of hy...Artificial neural networks （ANNs） and genetic programming （GP） have recently been used for the estimation of hydraulic data. In this study, they were used as alternative tools to estimate the characteristics of hydraulic jumps, such as the free surface location and energy dissipation. The dimensionless hydraulic parameters, including jump depth, jump length, and energy dissipation, were determined as functions of the Froude number and the height and length of corrugations. The estimations of the ANN and GP models were found to be in good agreement with the measured data. The results of the ANN model were compared with those of the GP model, showing that the proposed ANN models are much more accurate than the GP models.展开更多
The onset of thermal convection, due to heating from below in a system consisting of a fluid layer overlying a porous layer with anisotropic permeability and thermal diffusivity, is investigated analytically. The poro...The onset of thermal convection, due to heating from below in a system consisting of a fluid layer overlying a porous layer with anisotropic permeability and thermal diffusivity, is investigated analytically. The porous medium is both anisotropic in permeability whose principal axes are oriented in a direction that is oblique to the gravity vector and in thermal conductivity with principal directions coincident with the coordinate axes. The Beavers-Joseph condition is applied at the interface between the two layers. Based on parallel flow approximation theory, a linear stability analysis is conducted to study the geothermal river beds system and documented the effects of the physical parameters describing the problem. The critical Rayleigh numbers for both the fluid and porous layers corresponding, to the onset of convection arising from sudden heating and cooling at the boundaries are also predicted. The results obtained are in agreement with those found in the past for particular isotropic and anisotropic cases and for limiting cases concerning pure porous media and for pure fluid layer. It has demonstrated that the effects of anisotropic parameters are highly significant.展开更多
Gas flows and particle mass flux were measured and clutriation experimentswere conducted in two cold test models of vortexing fluidized bed(VFB).The experimen-tal results show that the secondary air injected tangentia...Gas flows and particle mass flux were measured and clutriation experimentswere conducted in two cold test models of vortexing fluidized bed(VFB).The experimen-tal results show that the secondary air injected tangentially creates strong vortexes,estab-lishes particle suspension layers and internal circulation,and suppresses the elutriation offine particles greatly.The vortexing fluidized bed combustion has bright prospect bccauseof its much higher combustion efficiency and desulphidation efficiency than bubblingfluidized bed combustion due to long particle residence time and high slip velocity betweengas and solid,and its simpler configuration and lower cost than circulating fluidized bedcombustion.展开更多
When a 2-D progressive wave train normally or obliquely approaches a vertical wall and then is normally or obliquely reflected from it, the combination of the approaching and reflected waves may result in a standing w...When a 2-D progressive wave train normally or obliquely approaches a vertical wall and then is normally or obliquely reflected from it, the combination of the approaching and reflected waves may result in a standing wave or a short-crested wave in front of the wall. This paper presents the experimental observations of sand bed configurations under the action of these water waves in front of the wall. The geometry of sand ripples under these water waves in front of the vertical wall is presented as a function of flow parameters, such as the water particle semi-excursion and the mobility number.展开更多
Short residence time of the sorbent in the gas stream and formation of a dense layer of reaction product surrounding its surface influence the sulfur removal efficiency. A practical means of improving the process perf...Short residence time of the sorbent in the gas stream and formation of a dense layer of reaction product surrounding its surface influence the sulfur removal efficiency. A practical means of improving the process performance is to employ fluidized bed reaction in replacement of entrained bed reaction on normally used in cool side desulfurizaiton. This paper describes cold modeling study of a circulating fluidized bed reactor. Several aspects of the problem are discussed: fluidization behavior of CaO, attrition of the sorbent and solids entrainment from the fluidized bed. Mechanisms and key controlling parameters are identified, and an integral model based on rate of attrition and mass balance is developed for predicting steady state mass flows and particle size distributions of the system. A process flow scheme is finally presented for conducting desulfurization tests in the second stage of the study.展开更多
文摘Artificial neural networks （ANNs） and genetic programming （GP） have recently been used for the estimation of hydraulic data. In this study, they were used as alternative tools to estimate the characteristics of hydraulic jumps, such as the free surface location and energy dissipation. The dimensionless hydraulic parameters, including jump depth, jump length, and energy dissipation, were determined as functions of the Froude number and the height and length of corrugations. The estimations of the ANN and GP models were found to be in good agreement with the measured data. The results of the ANN model were compared with those of the GP model, showing that the proposed ANN models are much more accurate than the GP models.
文摘The onset of thermal convection, due to heating from below in a system consisting of a fluid layer overlying a porous layer with anisotropic permeability and thermal diffusivity, is investigated analytically. The porous medium is both anisotropic in permeability whose principal axes are oriented in a direction that is oblique to the gravity vector and in thermal conductivity with principal directions coincident with the coordinate axes. The Beavers-Joseph condition is applied at the interface between the two layers. Based on parallel flow approximation theory, a linear stability analysis is conducted to study the geothermal river beds system and documented the effects of the physical parameters describing the problem. The critical Rayleigh numbers for both the fluid and porous layers corresponding, to the onset of convection arising from sudden heating and cooling at the boundaries are also predicted. The results obtained are in agreement with those found in the past for particular isotropic and anisotropic cases and for limiting cases concerning pure porous media and for pure fluid layer. It has demonstrated that the effects of anisotropic parameters are highly significant.
文摘Gas flows and particle mass flux were measured and clutriation experimentswere conducted in two cold test models of vortexing fluidized bed(VFB).The experimen-tal results show that the secondary air injected tangentially creates strong vortexes,estab-lishes particle suspension layers and internal circulation,and suppresses the elutriation offine particles greatly.The vortexing fluidized bed combustion has bright prospect bccauseof its much higher combustion efficiency and desulphidation efficiency than bubblingfluidized bed combustion due to long particle residence time and high slip velocity betweengas and solid,and its simpler configuration and lower cost than circulating fluidized bedcombustion.
文摘When a 2-D progressive wave train normally or obliquely approaches a vertical wall and then is normally or obliquely reflected from it, the combination of the approaching and reflected waves may result in a standing wave or a short-crested wave in front of the wall. This paper presents the experimental observations of sand bed configurations under the action of these water waves in front of the wall. The geometry of sand ripples under these water waves in front of the vertical wall is presented as a function of flow parameters, such as the water particle semi-excursion and the mobility number.
文摘Short residence time of the sorbent in the gas stream and formation of a dense layer of reaction product surrounding its surface influence the sulfur removal efficiency. A practical means of improving the process performance is to employ fluidized bed reaction in replacement of entrained bed reaction on normally used in cool side desulfurizaiton. This paper describes cold modeling study of a circulating fluidized bed reactor. Several aspects of the problem are discussed: fluidization behavior of CaO, attrition of the sorbent and solids entrainment from the fluidized bed. Mechanisms and key controlling parameters are identified, and an integral model based on rate of attrition and mass balance is developed for predicting steady state mass flows and particle size distributions of the system. A process flow scheme is finally presented for conducting desulfurization tests in the second stage of the study.
