Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang＇e mission to acqui...Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang＇e mission to acquire drilling cores without damaging stratification information. Since the extraterrestrial environment is uncertain and different from the terrestrial environment, automated drill sampling missions are at risk of failure. The principles of drilling and coring for the lunar subsurface should be fully tested and verified on earth before launch. This paper proposes a test-bed for conducting the aforementioned experiments on earth. The test-bed comprises a rotary-percussive drilling mechanism, penetrating mechanism, drilling medium container, and signal acquisition and control system. For granular soil, coring experiments indicate that the sampling method has a high coring rate greater than 80%. For hard rock, drilling experiments indicate that the percussive frequency greatly affects the drilling efficiency. A multi-layered simulant composed of granular soil and hard rock is built to test the adaptability of drilling and coring. To tackle complex drilling media, an intelligent drilling strategy based on online recognition is proposed to improve the adaptability of the sampling drill. The primary features of this research are the proposal of a scheme for drilling and coring a test-bed for validation on earth and the execution of drilling experiments in complex media.展开更多
In order to verify the feasibility of semi-automatic garlic planter with inclined belt program and determine its reasonable operating parameters, the semi-automatic test-bed with inclined belt of garlic transplanting ...In order to verify the feasibility of semi-automatic garlic planter with inclined belt program and determine its reasonable operating parameters, the semi-automatic test-bed with inclined belt of garlic transplanting machine was designed, and the garlic box experiments were conducted. The angle of inclined belt on the test-bed and its running speed were adjustable. Single factor test results showed that the program of the semi-automatic garlic planter with inclined belt was feasible, and the angle of inclined belt and the test bed running speed affected the indicators. Orthogonal experiment results showed that the angle of inclined belt was the main factor affecting the test indicators. It is also found that the best angle was 30 degrees, while the most reasonable running speed was 0.75 Km/h.展开更多
A systematic, accurate and robust evaluating method for fine pitch printed circuit board （PCB） positioning assessment in testing fixture is developed. Targeting reliability of bed-of-nails tester is successfully eva...A systematic, accurate and robust evaluating method for fine pitch printed circuit board （PCB） positioning assessment in testing fixture is developed. Targeting reliability of bed-of-nails tester is successfully evaluated by the 2D pattern transform. Probe offset vector with its Weibull and Gaussian distribution estimates are obtained for further investigation about the causes of misalignment on the basis of a batch tests for same kind of PCBs.展开更多
The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The th...The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The thermal-hydraulic effect of the TBM-combined cooling circuit during a cyclic operation in ITER has been studied using the system code RELAP5. The RELAP5 is based on an one-dimensional, transient two-fluid model for the flow of a two-phase steam-water mixture that can contain noncondensable components like Helium. The RELAP5models are modified to take the cyclic operation of the circulator, heat, exchanger, bypass, valves etc in to account. A sequence of operational phases is investigated, starting from the cold state through the heating phase that brings the system to a stand-by condition, followed by typical power cycles applied in ITER. The results show that the implemented control mechanisms keep the inlet temperature to the TBM and the total mass flow rate at the required values through all phases.展开更多
[ Objective] The study aims to discuss the feasibility of using a fixed biological bed to treat low-concentration organic waste gas. [ Method] A fixed biological bed was used to treat low-concentration organic waste g...[ Objective] The study aims to discuss the feasibility of using a fixed biological bed to treat low-concentration organic waste gas. [ Method] A fixed biological bed was used to treat low-concentration organic waste gas from a phosphate workshop, and then the waste gas treated was assessed by human sense of smell to determine the most economical empty bed contact time, thereby verifying the feasibility of using a fixed biolog- ical bed to treat low-concentration organic waste gas. [Result] When empty bed contact time was 60 s, the smell of the treated waste gas was acceptable, and COD value of recycled water in the fixed biological bed was essentially unchanged. It proved that organic load of the waste gas was consumed by microorganisms within 60 s. [ Conclusion] It is feasible to use a fixed biological bed to treat Iow-concantration organic waste gas from a phosphate workshop.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51105092)Introducing Talents of Discipline to Universities(111 Program,Grant No.B07018)+1 种基金Heilongjiang Postdoctoral Grant(Grant No.LBHZ11168)China Postdoctoral Science Foundation(Grant No.2012M520722)
文摘Drill sampling has been widely employed as an effective way to acquire deep samples in extraterrestrial exploration. A novel sampling method, namely, flexible-tube coring, was adopted for the Chang＇e mission to acquire drilling cores without damaging stratification information. Since the extraterrestrial environment is uncertain and different from the terrestrial environment, automated drill sampling missions are at risk of failure. The principles of drilling and coring for the lunar subsurface should be fully tested and verified on earth before launch. This paper proposes a test-bed for conducting the aforementioned experiments on earth. The test-bed comprises a rotary-percussive drilling mechanism, penetrating mechanism, drilling medium container, and signal acquisition and control system. For granular soil, coring experiments indicate that the sampling method has a high coring rate greater than 80%. For hard rock, drilling experiments indicate that the percussive frequency greatly affects the drilling efficiency. A multi-layered simulant composed of granular soil and hard rock is built to test the adaptability of drilling and coring. To tackle complex drilling media, an intelligent drilling strategy based on online recognition is proposed to improve the adaptability of the sampling drill. The primary features of this research are the proposal of a scheme for drilling and coring a test-bed for validation on earth and the execution of drilling experiments in complex media.
文摘In order to verify the feasibility of semi-automatic garlic planter with inclined belt program and determine its reasonable operating parameters, the semi-automatic test-bed with inclined belt of garlic transplanting machine was designed, and the garlic box experiments were conducted. The angle of inclined belt on the test-bed and its running speed were adjustable. Single factor test results showed that the program of the semi-automatic garlic planter with inclined belt was feasible, and the angle of inclined belt and the test bed running speed affected the indicators. Orthogonal experiment results showed that the angle of inclined belt was the main factor affecting the test indicators. It is also found that the best angle was 30 degrees, while the most reasonable running speed was 0.75 Km/h.
基金This project is supported by US Pennsylvania Dept. of Community & Economic Development(No.20-906-0015)National Natural Science Foundation of China(No.50390064, No.50575230)National Basic Research Program of China(973 Program, No.2003CB716202).
文摘A systematic, accurate and robust evaluating method for fine pitch printed circuit board （PCB） positioning assessment in testing fixture is developed. Targeting reliability of bed-of-nails tester is successfully evaluated by the 2D pattern transform. Probe offset vector with its Weibull and Gaussian distribution estimates are obtained for further investigation about the causes of misalignment on the basis of a batch tests for same kind of PCBs.
基金The project supported by European Fusion Development Agreement (EFDA) Technology Work Program
文摘The HCPB concept has been a European DEMO reference concept for nearly one decade. Detailed thermal-hydraulic study on the control behavior of the whole system is one of the important parts of this development. The thermal-hydraulic effect of the TBM-combined cooling circuit during a cyclic operation in ITER has been studied using the system code RELAP5. The RELAP5 is based on an one-dimensional, transient two-fluid model for the flow of a two-phase steam-water mixture that can contain noncondensable components like Helium. The RELAP5models are modified to take the cyclic operation of the circulator, heat, exchanger, bypass, valves etc in to account. A sequence of operational phases is investigated, starting from the cold state through the heating phase that brings the system to a stand-by condition, followed by typical power cycles applied in ITER. The results show that the implemented control mechanisms keep the inlet temperature to the TBM and the total mass flow rate at the required values through all phases.
文摘[ Objective] The study aims to discuss the feasibility of using a fixed biological bed to treat low-concentration organic waste gas. [ Method] A fixed biological bed was used to treat low-concentration organic waste gas from a phosphate workshop, and then the waste gas treated was assessed by human sense of smell to determine the most economical empty bed contact time, thereby verifying the feasibility of using a fixed biolog- ical bed to treat low-concentration organic waste gas. [Result] When empty bed contact time was 60 s, the smell of the treated waste gas was acceptable, and COD value of recycled water in the fixed biological bed was essentially unchanged. It proved that organic load of the waste gas was consumed by microorganisms within 60 s. [ Conclusion] It is feasible to use a fixed biological bed to treat Iow-concantration organic waste gas from a phosphate workshop.
