Theoretical analysis on springback of L-section extrusion in rotary stretch bending process

The theoretical analysis of springback in rotary stretch bending process of L-section extrusion was studied. The models for characterizing the springback angle after unloading were established based on the stress and strain distributions in the cross-section of the part. With the proposed model, analysis of the effect of pre-stretch force and post-stretch force on springback angle shows that springback decreases as the pre-stretch force or post-stretch force increases. Comparative study with experiments clearly demonstrates that the prediction of springback can resort to the current model without the loss of accuracy.

Determining knots by optimizing the bending and stretching energies

For a given set of data points in the plane, a new method is presented for computing a parameter value（knot） for each data point. Associated with each data point, a quadratic polynomial curve passing through three adjacent consecutive data points is constructed. The curve has one degree of freedom which can be used to optimize the shape of the curve. To obtain a better shape of the curve, the degree of freedom is determined by optimizing the bending and stretching energies of the curve so that variation of the curve is as small as possible. Between each pair of adjacent data points, two local knot intervals are constructed, and the final knot interval corresponding to these two points is determined by a combination of the two local knot intervals. Experiments show that the curves constructed using the knots by the new method generally have better interpolation precision than the ones constructed using the knots by the existing local methods.

Effect of bending and tension deformation on the texture evolution and stretch formability of Mg-Zn-RE-Zr alloy

Bending and tension deformations were performed on Mg-1.3 wt%Zn-0.2 wt%RE-0.3 wt%Zr(ZEK100)alloy sheets that initially had a transverse direction(TD)-split texture.The effects of bending and tension deformations on the texture formation and room-temperature formability of specimens were investigated.The specimen subjected to 3-pass bending and tension deformations exhibited an excellent Erichsen value of 9.6 mm.However,the Erichsen value deterioration was observed in the specimen subjected to 7-pass deformations.The rolling direction-split texture developed on the surface with an increasing pass number of deformations.Conversely,the clear TD-split texture remained at the central part.As a result,a quadrupole texture was macroscopically developed with an increasing pass number of deformations.The reduction in anisotropy by the formation of the quadrupole texture is suggested to be the main reason for the improvement in stretch formability.By contrast,the generation of coarse grains near the surface is suggested to be the direct cause for the deterioration of the stretch formability of the specimen subjected to 7-pass deformations.

Mechanical Analysis of Stretch-Bend Process

Describing stretch-bend process quantitatively is a need of the operator of tension leveller.Based on the research results of stretch-bend deformation mechanism,the mechanical behavior of stretch-bend process is analysed.

Numerical analysis of dimension precision of U-shaped aluminium profile rotary stretch bending

In order to enhance the dimension precision of bent part, advanced bending technologies is requested recently. Rotary stretch bending(RSB) is a suitable technology to realize high precision of bent part. The effect of processing parameters, namely the side pressure and the stretching force, on the dimension precision of aluminium profile RSB part was studied by finite element method. The numerical simulation of the U-shaped aluminium profile RSB was carried out, and the validity of the simulation was checked. Parametric analysis shows that the section distortion of the U-shaped profile LY12M bent part decreases with the increasing of the side pressure, whereas the springback of curvature increases, and that both of the section distortion and the springback of curvature decrease with the increasing of the stretching force, moreover, the uniformity of curvature of the bent part is clearly enhanced with the increasing of the stretching force. The results above prove that RSB technology can better improve the dimension precision of aluminium profile bent part.

A smart finger patch with coupled magnetoelastic and resistive bending sensors

In the era of Metaverse and virtual reality(VR)/augmented reality(AR),capturing finger motion and force interactions is crucial for immersive human-machine interfaces.This study introduces a flexible electronic skin for the index finger,addressing coupled perception of both state and process in dynamic tactile sensing.The device integrates resistive and giant magnetoelastic sensors,enabling detection of surface pressure and finger joint bending.This e-skin identifies three phases of finger action:bending state,dynamic normal force and tangential force(sweeping).The system comprises resistive carbon nanotubes(CNT)/polydimethylsiloxane(PDMS)films for bending sensing and magnetoelastic sensors(NdFeB particles,EcoFlex,and flexible coils)for pressure detection.The inward bending resistive sensor,based on self-assembled microstructures,exhibits directional specificity with a response time under 120 ms and bending sensitivity from 0°to 120°.The magnetoelastic sensors demonstrate specific responses to frequency and deformation magnitude,as well as sensitivity to surface roughness during sliding and material hardness.The system’s capability is demonstrated through tactile-based bread type and condition recognition,achieving 92%accuracy.This intelligent patch shows broad potential in enhancing interactions across various fields,from VR/AR interfaces and medical diagnostics to smart manufacturing and industrial automation.

基于IP联合蛋白质组学探讨ENG互作蛋白在bEnd.3细胞中的作用

目的本研究拟筛选并验证在脑微血管内皮细胞(bEnd.3)中Endoglin(ENG)的互作蛋白及其作用。方法采用蛋白质组学和生物信息学技术鉴定并富集ENG互作蛋白,对这些互作蛋白进行亚细胞定位、GO功能注释、IPR注释和蛋白互作网络等分析。将以上分析筛选出的ENG互作蛋白,采用免疫共沉淀(IP)实验、细胞免疫荧光(IF)和蛋白免疫印迹(WB)技术进行验证和对比,探究ENG互作蛋白在棕榈酸(PA)、基因沉默和过表达ENG处理bEnd.3细胞中的表达变化及作用。结果通过蛋白质组学分析,bEnd.3细胞中ENG互作蛋白在亚细胞定位分析中细胞骨架相关成分呈现出较高的占比;通过GO注释和IPR注释进一步发现,是细胞骨架中的中间纤维和微丝蛋白呈现较高的富集状态。ENG与细胞骨架蛋白互作热力图结果显示,与对照组相比,PA处理的bEnd.3细胞中微丝蛋白Filamin B(Flnb)数值显著降低。IP和IF结果显示,bEnd.3细胞中ENG与Flnb存在蛋白互作和共定位情况。WB结果显示,bEnd.3细胞在PA处理条件下,ENG和Flnb蛋白表达均下降;在ENG沉默条件下,Flnb蛋白随ENG表达的减少而降低;在ENG过表达条件下,Flnb蛋白随ENG表达的增加而升高。结论ENG互作蛋白广泛参与到多种相关的生物途径以及信号通路之中,ENG在bEnd.3细胞中与Flnb蛋白存在相互作用且二者具有共定位现象,ENG还能够调控PA处理的bEnd.3细胞Flnb蛋白表达水平。

Chronic effects of stretching on range of motion with consideration of potential moderating variables:A systematic review with meta-analysis

Background:It is well known that stretch training can induce prolonged increases in joint range of motion(ROM).However,to date more information is needed regarding which training variables might have greater influence on improvements in flexibility.Thus,the purpose of this metaanalysis was to investigate the effects of stretch training on ROM in healthy participants by considering potential moderating variables,such as stretching technique,intensity,duration,frequency,and muscles stretched,as well as sex-specific,age-specific,and/or trained state-specific adaptations to stretch training.Methods:We searched through PubMed,Scopus,Web of Science,and SportDiscus to find eligible studies and,finally,assessed the results from 77 studies and 186 effect sizes by applying a random-effect meta-analysis.Moreover,by applying a mixed-effect model,we performed the respective subgroup analyses.To find potential relationships between stretch duration or age and effect sizes,we performed a meta-regression.Results:We found a significant overall effect,indicating that stretch training can increase ROM with a moderate effect compared to the controls(effect size=-1.002;Z=-12.074;95%confidence interval:-1.165 to-0.840;p<0.001;I^(2)=74.97).Subgroup analysis showed a significant difference between the stretching techniques(p=0.01)indicating that proprioceptive neuromuscular facilitation and static stretching produced greater ROM than did ballistic/dynamic stretching.Moreover,there was a significant effect between the sexes(p=0.04),indicating that females showed higher gains in ROM compared to males.However,further moderating analysis showed no significant relation or difference.Conclusion:When the goal is to maximize ROM in the long term,proprioceptive neuromuscular facilitation or static stretching,rather than ballistic/dynamic stretching,should be applied.Something to consider in future research as well as sports practice is that neither volume,intensity,nor frequency of stretching were found to play a significant role in ROM yields.

Experimental,Numerical,and Analytical Studies on the Bending of Mechanically Lined Pipe

Mechanically lined pipe(MLP)is often used for offshore oil and gas transport because of its low cost and corrosion resistance.During installation and operation,the pipe may undergo severe bending deformation,which causes the liner to separate from the outer pipe and buckles,affecting the stability of the whole line.In this paper,the buckling response of MLP subjected to bending is investigated to clarify its bending characteristics by employing both experiments,numerical simulation,as theoretical methods.Two types of MLPs were manufactured with GB 45 carbon steel(SLP)and Al 6061(ALP)used as the outer pipe material,respectively.The hydraulic expansion and bending experiments of small-scale MLPs are conducted.In addition to the ovalized shape of the cross-section for the SLP specimens,the copper liner was found to wrinkle on the compressive side.In contrast,the liner of ALP remains intact without developing any wrinkling and collapse mode.In addition,a dedicated numerical framework and theoretical models were also established.It was found both the manufacturing and bending responses of the MLP can be well reproduced,and the predicted maximum moment and critical curvatures are in good agreement with the experimental results.

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al contents.The extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air cooling.The extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during extrusion.Due to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser grains.The AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,respectively.However,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and propagation.During bending,a macrocrack initiates on the outer surface of bending specimen in both alloys.The AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 alloy.The bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the specimen.In bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relationship ofε_(f,bending)=–0.1A_(ppt)+5.86.

基于p38MAPK-PPARγ/NF-κB信号通路探讨消肿止痛合剂对血管内皮细胞bEND-3凋亡的影响

目的从细胞及信号通路层面探讨消肿止痛合剂对皮瓣缺血再灌注损伤中血管内皮细胞凋亡的影响。方法血管内皮细胞bEND-3培养。TNF-α体外细胞凋亡诱导模型建立并将细胞分为:p38MAPK抑制剂组、PPARγ抑制剂组、NF-κB抑制剂组、模型对照组、空白组。微丝绿色荧光探针观察细胞骨架微丝。RT-PCR法检测血管内皮细胞bEND-3细胞中p38MAPK、PPARγ、IκBα、NF-κBmRNA的表达。结果空白组中p38MAPK、PPARγ、IκBα、NF-κB的表达量无明显差异,模型对照组中p38MAPK与NF-κB的表达量最高,与模型对照组相比,p38MAPK抑制剂组bEnd.3细胞中p38MAPK与NF-κB的表达被抑制,PPARγ、IκBα表达量升高(P<0.05);PPARγ抑制剂组中PPARγ、IκBα、NF-κB的表达被抑制,p38MAPK表达量升高(P<0.05),NF-κB抑制剂组中p38MAPK与NF-κB的表达被抑制,IκBα与PPARγ的表达量升高(P<0.05);与空白组相比,p38MAPK抑制剂组与NF-κB抑制剂组中p38MAPK、PPARγ、IκBα、NF-κB的表达量升高(P<0.05),PPARγ抑制剂组中p38MAPK与NF-κB表达量明显升高,PPARγ、IκBα表达被抑制(P<0.05)。结论消肿止痛合剂可抑制bEND-3细胞凋亡,其机制与影响可能与p38MAPK-PPARγ/NF-κB信号通路有关。

Static Stretching Combined with Conscious Slower Breathing May Increase Parasympathetic Activity and Reduce Stress in Adult Women

Background: Women are thought to be more susceptible to stress than men in a stressful society, and reducing stress is crucial for women to maintain their health. Static stretching (SST) is applied in various fields to not only increase muscle flexibility but also reduce stress. Additionally, conscious slower breathing (CSB) predominates parasympathetic activity, causing a relaxing effect. These results indicate that combining SST and CSB may be more useful in reducing stress. However, to the best of our knowledge, the effect of this combination remains unclear. Objective: This study aimed to elucidate the effects of the combination of SST and CSB on autonomic activity and stress in adult women. Methods: Eleven healthy Japanese adult female participants performed SST with nonconscious natural breathing for 20 min. The same participants performed SST in combination with CSB (2 s inspiratory and 4 s expiratory) for 20 min on another day. Salivary cortisol and chromogranin A levels were measured before and after stretching as stress markers of the hypothalamic-pituitary-adrenal axis and sympathetic nervous system. The coefficient of variation of the R-R interval (CVR-R) and high-frequency component (HF), which reflect parasympathetic nerve activity, and heart rate and low-frequency component (LF)/HF ratio, which reflect sympathetic nerve activity, were measured before, during, and after stretching. Results: SST decreased cortisol levels but with no significant changes in chromogranin A, heart rate, CVR-R, HF, or LF/HF ratio. The combination of SST and CSB increased CVR-R and HF levels in addition to decreasing cortisol levels but with no significant changes in chromogranin A, heart rate, or LF/HF levels. Conclusion: These results indicate that the combination of SST and CSB may increase parasympathetic activity and reduce stress. However, future randomized controlled trials with larger sample sizes should support this conclusion.

Revisiting the stretch-induced force deficit:A systematic review with multilevel meta-analysis of acute effects

Background:When recommending avoidance of static stretching prior to athletic performance,authors and practitioners commonly refer to available systematic reviews.However,effect sizes(ES)in previous reviews were extracted in major part from studies lacking control conditions and/or prepost testing designs.Also,currently available reviews conducted calculations without accounting for multiple study outcomes,with ES:0.03 to 0.10,which would commonly be classified as trivial.Methods:Since new meta-analytical software and controlled research articles have appeared since 2013,we revisited the available literatures and performed a multilevel meta-analysis using robust variance estimation of controlled prepost trials to provide updated evidence.Furthermore,previous research described reduced electromyography activity—also attributable to fatiguing training routines—as being responsible for decreased subsequent performance.The second part of this study opposed stretching and alternative interventions sufficient to induce general fatigue to examine whether static stretching induces higher performance losses compared to other exercise routines.Results:Including 83 studies with more than 400 ES from 2012 participants,our results indicate a significant,small ES for a static stretch-induced maximal strength loss(ES=0.21,p=0.003),with high magnitude ES(ES=0.84,p=0.004)for stretching durations≥60 s per bout when compared to passive controls.When opposed to active controls,the maximal strength loss ranges between ES:0.17 to0.28,p<0.001 and 0.040 with mostly no to small heterogeneity.However,stretching did not negatively influence athletic performance in general(when compared to both passive and active controls);in fact,a positive effect on subsequent jumping performance(ES=0.15,p=0.006)was found in adults.Conclusion:Regarding strength testing of isolated muscles(e.g.,leg extensions or calf raises),our results confirm previous findings.Nevertheless,since no(or even positive)effects could be found for athletic performance,our results do not support previous recommendations to exclude static stretching from warm-up routines prior to,for example,jumping or sprinting.

Discharge evolution law of debris flow based on a sharp bend physical modeling test

For the basins with debris flow development,its channel terrain exhibits a tortuous shape,which significantly restricts the movement of debris flows and leads to severe erosion effects on the concave bank.Therefore,this study aims to analyze the shear force of debris flows within the bend channel.We established the relationship between the shear force and bend curvature through laboratory experiments.Under the long-term erosion by debris flows,the curvature radius of bends gradually increases,however,when this increasing trend reaches an equilibrium state with the intensity of debris flow discharge,there will be no significant change in curvature radius.In general,the activity pattern and discharges of debris flows would remain relatively stable.Hence,we can infer the magnitude of debris flow discharges from the terrain parameters of the bend channel.

Fabrication of lightweight 3D interpenetrated NiTi@Mg composite with superior bending properties

A NiTi@Mg interpenetrating phase composite with high strength and lightweight was prepared by additive manufacturing(AM)and infiltration technology,and the interface bonding,three-point bending properties and cyclic compressive properties of NiTi@Mg composites were investigated.The results show that the metallurgically bonded interface is formed at the NiTi/Mg interfaces.The bending strength and compressive strength of the NiTi@Mg composite are 2.5 and 1.7 times higher than those of the NiTi scaffold,respectively.During the bending deformation process,a large number of dislocations are observed to accumulate in the soft Mg area at the interface.Furthermore,the finite element model showed that the stress accumulation area,where the bending crack is initiated,is located at the interface of NiTi and Mg.The strengthening mechanism of NiTi@Mg composites is attributed to the twinning strengthening of Mg and heterogeneous structure strengthening.

Bending Failure Mode and Prediction Method of the Compressive Strain Capacity of A Submarine Pipeline with Dent Defects

A dent is a common type of defects for submarine pipeline.For submarine pipelines,high hydrostatic pressure and internal pressure are the main loads.Once pipelines bend due to complex subsea conditions,the compression strain capacity may be exceeded.Research into the local buckling failure and accurate prediction of the compressive strain capacity are important.A finite element model of a pipeline with a dent is established.Local buckling failure under a bending moment is investigated,and the compressive strain capacity is calculated.The effects of different parameters on pipeline local buckling are analyzed.The results show that the dent depth,external pressure and internal pressure lead to different local buckling failure modes of the pipeline.A higher internal pressure indicates a larger compressive strain capacity,and the opposite is true for external pressure.When the ratio of external pressure to collapse pressure of intact pipeline is greater than 0.1,the deeper the dent,the greater the compressive strain capacity of the pipeline.And as the ratio is less than 0.1,the opposite is true.On the basis of these results,a regression equation for predicting the compressive strain capacity of a dented submarine pipeline is proposed,which can be referred to during the integrity assessment of a submarine pipeline.

Bending Strength of Glass Materials under Strong Dynamic Impact and Its Strain Rate Effects

Based on the structural characteristics of the high-speed loading tester,a four-point bending test device was designed to carry out the four-point bending strength test of glass under the action of static load and different impact velocities,and the formulae for calculating the maximum dynamic stress and strain rate of glass specimens under the action of impact loads were derived.The experimental results show that the bending strength values of the glass under dynamic impact loading are all higher than those under static loading.With the increase of impact speed,the bending strength value of glass specimens generally tends to increase,and the bending strength value increases more obviously when the impact speed exceeds 0.5 m/s or higher.By increasing the impact velocity,higher tensile strain rate of glass specimens can be obtained because the load action time becomes shorter.The bending strength of the glass material increases with its tensile strain rate,and when the tensile strain rate is between 0 and 2 s^(-1),the bending strength of the glass specimen grows more obviously with the strain rate,indicating that the glass bending strength is particularly sensitive to the tensile strain rate in this interval.As the strain rate increases,the number of cracks formed after glass breakage increases significantly,thus requiring more energy to drive the crack formation and expansion,and showing the strain rate effect of bending strength at the macroscopic level.The results of the study can provide a reference for the load bearing and structural design of glass materials under dynamic loading.

Cryogenic springback of 2219-W aluminum alloy sheet through V-shaped bending

A V-shaped bending device was established to evaluate the effects of temperature and bending fillet radius on springback behavior of 2219-W aluminum alloy at cryogenic temperatures.The cryogenic springback mechanism was elucidated through mechanical analyses and numerical simulations.The results indicated that the springback angle at cryogenic temperatures was greater than that at room temperature.The springback angle increased further as the temperature returned to ambient conditions,attributed to the combined effects of the “dual enhancement effect” and thermal expansion.Notably,a critical fillet radius made the springback angle zero for 90° V-shaped bending.The critical fillet radius at cryogenic temperatures was smaller than that at room temperature,owing to the influence of temperature variations on the bending moment ratio between the forward bending section at the fillet and the reverse bending section of the straight arm.

Analysis of deformation mechanisms in magnesium single crystals using a dedicated four-point bending tester

In this study,we explored the deformation mechanisms of Mg single crystals using a combination of scanning electron microscopy and electron backscattered diffraction in conjunction with a dedicated four-point bending tester.We prepared two single-crystal samples,oriented along the<1120>and<1010>directions,to assess the mechanisms of deformation when the initial basal slip was suppressed.In the<1120>sample,the primary{1012}twin(T1)was confirmed along the<1120>direction of the sample on the compression side with an increase in bending stress.In the<1010>sample,T1 and the secondary twin(T2)were confirmed to be along the<1120>direction,with an orientation of±60°with respect to the bending stress direction,and their direction matched with(0001)in T1 and T2.This result implies that crystallographically,the basal slip occurs readily.In addition,the<1010>sample showed the double twin in T1 on the compression side and the tertiary twin along the<1010>direction on the tension side.These results demonstrated that the maximum bending stress and displacement changed significantly under the bend loading because the deformation mechanisms were different for these single crystals.Therefore,the correlation between bending behavior and twin orientation was determined,which would be helpful for optimizing the bending properties of Mg-based materials.

Bending strength degradation of a cantilever plate with surface energy due to partial debonding at the clamped boundary

This paper investigates the bending fracture problem of a micro/nanoscale cantilever thin plate with surface energy,where the clamped boundary is partially debonded along the thickness direction.Some fundamental mechanical equations for the bending problem of micro/nanoscale plates are given by the Kirchhoff theory of thin plates,incorporating the Gurtin-Murdoch surface elasticity theory.For two typical cases of constant bending moment and uniform shear force in the debonded segment,the associated problems are reduced to two mixed boundary value problems.By solving the resulting mixed boundary value problems using the Fourier integral transform,a new type of singular integral equation with two Cauchy kernels is obtained for each case,and the exact solutions in terms of the fundamental functions are determined using the PoincareBertrand formula.Asymptotic elastic fields near the debonded tips including the bending moment,effective shear force,and bulk stress components exhibit the oscillatory singularity.The dependence relations among the singular fields,the material constants,and the plate's thickness are analyzed for partially debonded cantilever micro-plates.If surface energy is neglected,these results reduce the bending fracture of a macroscale partially debonded cantilever plate,which has not been previously reported.