Elucidating the structure-activity relationship of Cu-Ag bimetallic catalysts for electrochemical CO_(2) reduction

Developing bimetallic catalysts is an effective strategy for enhancing the activity and selectivity of electrochemical CO_(2) reduction reactions,where understanding the structure-activity relationship is essential for catalyst design.Herein,we prepared two Cu-Ag bimetallic catalysts with Ag nanoparticles attached to the top or the bottom of Cu nanowires.When tested in a flow cell,the Cu-Ag catalyst with Ag nanoparticles on the bottom achieved a faradaic efficiency of 54%for ethylene production,much higher than the catalyst with Ag nanoparticles on the top.The catalysts were further studied in the H-cell and zero-gap MEA cell.It was found that placing the two metals in the intensified reaction zone is crucial to triggering the tandem reaction of bimetallic catalysts.Our work elucidates the structure-activity relationship of bimetallic catalysts for CO_(2) reduction and demonstrates the importance of considering both catalyst structures and cell characteristics to achieve high activity and selectivity.

In-situ constructing Cu_(1)Bi_(1)bimetallic catalyst to promote the electroreduction of CO_(2)to formate by synergistic electronic and geometric effects

Electrochemical CO_(2)reduction to formate is a potential approach to achieving global carbon neutrality.Here,Cu1Bi1bimetallic catalyst was prepared by a co-precipitation method.It has a ginger like composite structure(CuO/CuBi_(2)O_(4))and exhibited a high formate faradaic efficiency of 98.07%at–0.98 V and a large current density of–56.12 mA.cm^(-2)at–1.28 V,which is twice as high as Bi2O3catalyst.Especially,high selectivity(FE^(–)_(HCOO)>85%)is maintained over a wide potential window of 500 mV.In-situ Raman measurements and structure characterization revealed that the reduced Cu1Bi1bimetallic catalyst possesses abundant Cu-Bi interfaces and residual Bi-O structures.The abundant Cu-Bi interface structures on the catalyst surface can provide abundant active sites for CO_(2)RR,while the Bi-O structures may stabilize the CO_(2)^(*–)intermediate.The synergistic effect of abundant Cu-Bi interfaces and Bi-O species promotes the efficient synthesis of formate by following the OCHO^(*)pathway.

Long-range electron synergy over Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst in enhancing charge separation for photocatalytic hydrogen production

The development of novel single-atom catalysts with optimal electron configuration and economical noble-metal cocatalyst for efficient photocatalytic hydrogen production is of great importance,but still challenging.Herein,we fabricate Pt and Co single-atom sites successively on polymeric carbon nitride(CN).In this Pt_(1)-Co_(1)/CN bimetallic single-atom catalyst,the noble-metal active sites are maximized,and the single-atomic Co_(1)N_4sites are tuned to Co_(1)N_3sites by photogenerated electrons arising from the introduced single-atomic Pt_(1)N_4sites.Mechanism studies and density functional theory(DFT)calculations reveal that the 3d orbitals of Co_(1)N_3single sites are filled with unpaired d-electrons,which lead to the improved visible-light response,carrier separation and charge migration for CN photocatalysts.Thereafter,the protons adsorption and activation are promoted.Taking this advantage of long-range electron synergy in bimetallic single atomic sites,the photocatalytic hydrogen evolution activity over Pt_(1)-Co_(1)/CN achieves 915.8 mmol g^(-1)Pt h^(-1),which is 19.8 times higher than Co_(1)/CN and 3.5 times higher to Pt_(1)/CN.While this electron-synergistic effect is not so efficient for Pt nanoclusters.These results demonstrate the synergistic effect at electron-level and provide electron-level guidance for the design of efficient photocatalysts.

Bimetallic catalysts as electrocatalytic cathode materials for the oxygen reduction reaction in microbial fuel cell:A review

Microbial fuel cell(MFC) is one synchronous power generation device for wastewater treatment that takes into account environmental and energy issues, exhibiting promising potential. Sluggish oxygen reduction reaction(ORR) kinetics on the cathode remains by far the most critical bottleneck hindering the practical application of MFC. An ideal cathode catalyst should possess excellent ORR activity, stability, and costeffectiveness, experiments have demonstrated that bimetallic catalysts are one of the most promising ORR catalysts currently. Based on this, this review mainly analyzes the reaction mechanism(ORR mechanisms, synergistic effects), advantages(combined with characterization technologies), and typical synthesis methods of bimetallic catalysts, focusing on the application effects of early Pt-M(M = Fe, Co, and Ni) alloys to bifunctional catalysts in MFC, pointing out that the main existing challenges remain economic analysis, long-term durability and large-scale application, and looking forward to this. At last, the research trend of bimetallic catalysts suitable for MFC is evaluated, and it is considered that the development and research of metal-organic framework(MOF)-based bimetallic catalysts are still worth focusing on in the future, intending to provide a reference for MFC to achieve energy-efficient wastewater treatment.

Reactive ball-milling synthesis of Co-Fe bimetallic catalyst for efficient hydrogenation of carbon dioxide to value-added hydrocarbons

Catalytic hydrogenation of CO_(2) using renewable hydrogen not only reduces greenhouse gas emissions,but also provides industrial chemicals.Herein,a Co-Fe bimetallic catalyst was developed by a facile reactive ball-milling method for highly active and selective hydrogenation of CO_(2) to value-added hydrocarbons.When reacted at 320℃,1.0 MPa and 9600 mL h^(-1) g_(cat)^(-1),the selectivity to light olefin(C_(2)^(=)-C_(4)^(=)) and C_(5)+ species achieves 57.3% and 22.3%,respectively,at a CO_(2) co nversion of 31.4%,which is superior to previous Fe-based catalysts.The CO_(2) activation can be promoted by the CoFe phase formed by reactive ball milling of the Fe-Co_(3)O_(4) mixture,and the in-situ Co_(2)C and Fe_(5)C_(2) formed during hydrogenation are beneficial for the C-C coupling reaction.The initial C-C coupling is related to the combination of CO species with the surface carbon of Fe/Co carbides,and the sustained C-C coupling is maintained by self-recovery of defective carbides.This new strategy contributes to the development of efficient catalysts for the hydrogenation of CO_(2) to value-added hydrocarbons.

Activity and Selectivity of Bimetallic Catalysts Based on SBA-15 for Nitrate Reduction in Water

Nitrate from the application of nitrogen-based fertilizers in intensive agriculture is a notorious waste product, though it lacks cost-effective solutions for its removal from potential drinking water resources. Catalytic reduction appears to be a promising technique for converting nitrates to benign nitrogen gas. Mesoporous silica SBA-15 is a frequently used catalyst support that has large surface areas and highly ordered nanopores. In this work, mesoporous silica SBA-15 bimetallic catalysts for nitrate reduction were investigated. The catalyst was optimized for the selection of promoter metal (Sn and Cu), noble metal (Pd and Pt) and loading ratios of these metals at different temperatures and reduction conditions. The catalysts prepared were characterized by FT-IR, N2 physisorption, XRD, SEM, and ICP. All catalysts showed the presence of cylindrical mesoporous channels and uniform pore structures that remained even after metals loading. In the presence of a CO2 buffer, the catalysts 4Pd-1Cu/SBA-15 and 1Pt-1Cu/SBA-15 reduced at 100?C under H2 and 1Pd-1Cu/SBA-15 reduced at 200°C under H2 demonstrated very high nitrate conversion. Furthermore, the forementioned Pd catalysts had higher N2 selectivity (88% - 87%) compared to Pt catalyst (80%). Nitrate conversion by the 4Pd-1Cu/SBA-15 catalyst was significantly decreased to 81% in the absence of CO2.

Research Progress of Nickel Iron Bimetallic Series Electrocatalytic Materials

Hydrogen energy has become one of the recognized clean energy sources worldwide due to its advantages such as low cost,renewable energy,and green environmental protec-tion.Electrolytic water is currently one of the most promising solutions for providing hydrogen fuel.Nickel iron bimetallic electrocatalysts have abundant sources,low cost,clean and pollution-free properties,and strong catalytic performance,This article mainly reviews the development and research of bimetallic nickel iron oxides and nickel iron alloys in recent years,and explores their synthesis methods,properties,and stability in depth.

Effect of manganese on the catalytic performance of an iron-manganese bimetallic catalyst for light olefin synthesis

A systematic study was carried out to investigate the promotion effect of manganese on the performance of a coprecipitated iron-manganese bimetallic catalyst for the light olefins synthesis from syngas. The catalyst samples were characterized by N2 physisorption, transmis- sion electron microscopy （TEM）, X-ray photoelectron spectroscopy （XPS）, powder X-ray diffraction （XRD）, Mossbauer spectroscopy, H2- differential thermogravimetric analysis （H2-DTG）, CO temperature-programmed reduction （CO-TPR） and CO2 temperature-programmed des- orption （CO2-TPD）. The Fischer-Tropsch synthesis （FTS） performance of the catalyst was measured at 1.5 MPa, 250 ℃ and syngas with H2/CO ratio of 2.0. The characterization results indicated that the addition of manganese decreases the catalyst crystallite size, and improves the catalyst BET surface area and pore volume. The presence of manganese suppresses the catalyst reduction and carburization in H2, CO and syngas, respectively. The addition of manganese improves the catalytic activity of water-gas shift reaction and suppresses the oxidation of iron carbides in the FTS reaction. The incorporation of manganese improves the catalyst surface basicity and results in a significant improvement in the selectivities to light olefins and heavy hydrocarbons （C5＋）, and furthermore an inhibition of methane formation in FTS. The pure iron catalyst （Mn-00） has the highest initial FTS catalytic activity （65%） and the lowest selectivity （17.35 wt%） to light olefins （C2=-C4=）. The addition of an appropriate amount of manganese can improve the catalyst FTS activity.

Highly effective direct synthesis of DMC from CH_3OH and CO_2 using novel Cu-Ni/C bimetallic composite catalysts

Novel Cu-Ni/C has been prepared and utilized as an efficient catalyst system in direct synthesis of DMC from CH3OH and CO2.

Atomically Dispersed Fe-Co Bimetallic Catalysts for the Promoted Electroreduction of Carbon Dioxide

The electroreduction reaction of CO_(2)(ECO_(2)RR)requires high-performance catalysts to convert CO_(2)into useful chemicals.Transition metal-based atomically dispersed catalysts are promising for the high selectivity and activity in ECO_(2)RR.This work presents a series of atomically dispersed Co,Fe bimetallic catalysts by carbonizing the Fe-introduced Co-zeolitic-imidazolate-framework(C-Fe-Co-ZIF)for the syngas generation from ECO_(2)RR.The synergistic effect of the bimetallic catalyst promotes CO production.Compared to the pure C-Co-ZiF,C-Fe-Co-ZIF facilitates CO production with a CO Faradaic efficiency(FE)boost of 10%,with optimal FE_(CO)of 51.9%,FE_(H_(2))of 42.4%at-0.55 V,and CO current density of 8.0 mA cm^(-2)at-0.7 V versus reversible hydrogen electrode(RHE).The H_(2)/CO ratio is tunable from 0.8 to 4.2 in a wide potential window of-0.35 to-0.8 V versus RHE.The total FE_(CO+H_(2))maintains as high as 93%over 10 h.The proper adding amount of Fe could increase the number of active sites and create mild distortions for the nanoscopic environments of Co and Fe,which is essential for the enhancement of the CO production in ECO_(2)RR.The positive impacts of Cu-Co and Ni-Co bimetallic catalysts demonstrate the versatility and potential application of the bimetallic strategy for ECO_(2)RR.

Effects of the Different Supports on the Activity and Selectivity of Iron-Cobalt Bimetallic Catalyst for Fischer-Tropsch Synthesis

Silica, alumina, and activated carbon supported iron-cobalt catalysts were prepared by incipient wetness impregnation. These catalysts have been characterized by BET, X-ray diffraction （XRD）, and temperature-programmed reduction （TPR）. Activity and selectivity of iron-cobalt supported on different carriers for CO hydrogenation were studied under the conditions of 1.5 MPa, 493 K, 630 h^-1, and H2/CO ratio of 1.6. The results indicate that the activity, C4 olefin/（C4 olefin＋C4 paraffin） ratio, and C5 olefin/（C5 olefin＋C5 paraffin） decrease in the order of Fe-Co/SiO2, Fe-Co/AC1, Fe-Co/Al2O3 and Fe- Co/AC2. The activity of Fe-Co/SiO2 reached a maximum. The results of TPR show that the Fe-Co/SiO2 catalyst is to some extent different. XRD patterns show that the Fe-Co/SiO2 catalyst differs significantly from the others; it has two diffraction peaks. The active spinel phase is correlated with the supports.

PVP-Supported Palladium-Cadmium Bimetallic Catalyst for the Hydrogen Transfer Dechlorination of Aryl Chlorides

PVP-supported bimetallic catalyst, PVP-PdCl2-CdCl2, exhibits extremely high catalytic activity for the hydrogen transfer dechlorination of aryl chlorides in neutral environment. The yields of dechlorination products are high under mild reaction conditions and the operation is simple.

Reverse Microemulsion Synthesis and Characterization of Pd-Ag Bimetallic Alloy Catalysts Supported on Al_2O_3 for Acetylene Hydrogenation

Pd-Ag bimetallic alloy nanoparticles were synthesized by the reverse microemulsion method,and then deposited on Al2O3 to form the supported catalyst.The nanoparticles of Pd-Ag and Pd-Ag/Al2O3 samples were characterized by UV/Vis,HRTEM,EDX,XRD,and XPS.The test results indicated that Pd-Ag bimetallic alloy nanoparticles with a size of about 2 nm and a face-centered cubic(fcc) structure were formed in the measured area of microemulsion.The growth of nanoparticles was effectively limited within the droplet of micoremulsion.TEM image exhibited that the Pd-Ag alloy nanoparticles were well-dispersed on the Al2O3 support.The catalytic performance of various catalysts for selective hydrogenation of acetylene showed that a higher acetylene conversion and selectivity to ethylene upon acetylene hydrogenation was achieved on a nano-sized Pd-Ag bimetallic catalyst with a Pd/Ag alloy supported molar ratio of 1:1.5.

Synergistic effects of bimetallic Cu-Fe/SiO_2 nanocatalysts in selective hydrogenation of diethyl malonate to 1,3-propanediol

Cu-x-Fe-y/SiO2 catalysts were prepared using urea-assisted sol-gel method. The structure and physicochemical properties of the catalysts were characterized using N-2 adsorption-desorption, transmission electron microscopy, H-2-temperature-programmed reduction, powder X-ray diffraction, and X-ray photoelectron spectroscopy. Compared with monometallic Cu or Fe catalysts, the bimetallic Cu-x-Fe-y/SiO2 catalysts exhibited enhanced catalytic performance for the selective hydrogenation of diethyl malonate to 1,3-propanediol. The bimetallic catalyst with an optimal Cu/Fe atomic ratio of 2 exhibited the highest activity, which yielded 96.3% conversion to diethyl malonate and 93.3% selectivity to 1,3-propanediol under the optimal reaction conditions. Characterization results revealed that interactions between Cu and Fe contributed to the improvement of diethyl malonate conversion and selectivity to 1,3-propanediol. The X-ray photoelectron spectroscopy results revealed that the addition of appropriate amount of Fe species enhanced the reduction of Cu2+ species, thereby increasing the Cu-0 species on the surface of bimetallic catalyst. It led to a better chemisorption capacity of hydrogen and further promoted of the activation of hydrogen molecule. The ethyl acetate temperature-programmed desorption results indicated that the FeOx species provided the additional adsorption sites for substrate molecules, and they activated the C=O bond. The improved catalytic performance of bimetallic Cu-x-Fe-y/SiO2 catalyst was mainly attributed to the synergistic effect between Cu-0 and FeOx species. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

A multi-functional Ru Mo bimetallic catalyst for ultra-efficient C3 alcohols production from liquid phase hydrogenolysis of glycerol

Ru and Mo bimetallic catalysts supported on active carbon modified by phosphotungstic acid(PW)were designed and applied in glycerol hydrogenolysis reaction.The physicochemical properties of the catalysts were characterized and the presence of active sites was investigated from the perspective of the glycerol hydrogenolysis performance.The MoOxis highly selective for the C—O bond cleavage of glycerol molecules,which can reasonably regulate the strong C—C bond cleavage activity of Ru nanoparticles.By using sequential deposition of Ru and Mo supported on mesoporous PW-C,the characterization results show that the combination of isolated low-valence MoOxwith metal Ru particles can form“MoOx-Ru-PW”,which provides highly catalytic activity toward C—O bond cleavage,selectively producing more C3 alcohols(mainly 1,2(3)-propanediol).The glycerol conversion of 1%Mo/Ru/PW-C catalyst was 59.6%,the selectivity of C3 alcohol was 96.1%,and the selectivity of propanediol(1,2(3)-propanediol)was 94.9%.It is noteworthy that the selectivity of 1,3-propanediol reached 20.7%when the PW was 21.07%(mass).This study provides experimental evidence for the tandem dehydration and hydrogenation mechanism of the multifunctional Mo/Ru/PW-C catalyst.

Base-free aerobic oxidation of glycerol on TiO_2-supported bimetallic Au–Pt catalysts

The aerobic oxidation of glycerol provides an economically viable route to glyceraldehyde, dihydroxyacetone and glyceric acid with versatile applications, for which monometallic Pt, Au and Pd and bimetallic Au-Pt, Au- Pd and Pt-Pd catalysts on TiO2 were examined under base-free conditions. Pt exhibited a superior activity relative to Pd, and Au-Pd and Pt-Pd while Au was essentially inactive. The presence of Au on the Au-Pt/TiO2 catalysts led to their higher activities （normalized per Pt atom） in a wide range of Au/Pt atomic ratios （i.e. 1/3-7/1 ）, and the one with the Au/Pt ratio of 3/1 exhibited the highest activity. Such promoting effect is ascribed to the increased electron density on Pt via the electron transfer from Au to Pt, as characterized by the temperature-programmed desorption of CO and infra-red spectroscopy for CO adsorption. Meanwhile, the presence of Au on Au-Pt/TiO2, most like due to the observed electron transfer, changed the product selectivity, and facilitated the oxidation of the secondary hydroxyl groups in glycerol, leading to the favorable formation of dihydroxyacetone over glyceraldehyde and glyceric acid that were derived from the oxidation of the primary hydroxyl groups. The synergetic effect between Au and Pt demonstrates the feasibility in the efficient oxidation of glycerol to the targeted products, for example, by rational tuning of the electronic properties of metal catalysts.

Utilizing bimetallic catalysts to mitigate coke formation in dry reforming of methane

Dry reforming of methane(DRM) involves the conversion of carbon dioxide(CO_(2)) and methane(CH_(4)) into syngas(a mixture of hydrogen, H_(2), and carbon monoxide, CO), which can then be used to produce a wide range of products by means of Fischer–Tropsch synthesis. DRM has gained much attention as a means of mitigating damage from anthropogenic greenhouse gas(GHGs) emissions to the environment and instead utilizing these gases as precursors for value-added chemicals or to synthesize sustainable fuels and chemicals. Carbon deposition or coke formation, a primary cause of catalyst deactivation, has proven to be a major challenge in the development of DRM catalysts. The use of nickel-and cobalt-based catalysts has been extensively explored for DRM for their high activity and low cost but suffer from poor stability due to coke formation that has hindered their commercialization. Numerous articles have reviewed the various aspects of catalyst deactivation and strategies for mitigation, but few has focused on the benefit of bimetallic catalysts for mitigating coke formation. Bimetallic catalysts, often improve the catalytic stability over their monometallic counterparts due to synergistic effects resulting from two metal-tometal interactions. This review will cover DRM literature for various bimetallic catalyst systems, including the effect of supports and promoters, on the mitigation of carbonaceous deactivation.

Formic acid fractionation towards highly efficient cellulose-derived PdAg bimetallic catalyst for H_(2) evolution

The present work,in which cellulose isolated from formic acid fractionation(FAC)is decorated with polyetherimide(PEI)to attain highly efficient cellulose-derived PdAgbimetallic catalyst(PdAg-PEI-FAC),has been investigated,and the catalyst properties are characterized by XRD,XPS,BET,ICP-AES and HAADF-STEM.The as-obtained Pd_(3.75)Ag_(3.75)-PEI-FAC exhibits excellent catalytic performance for H_(2)evolution from a sodium formate-free formic acid(FA)aqueous medium at ambient temperature and the turnover frequency(TOF)reaches a high value of 2875 h^(-1)which is superior to most of the previously reported Pd-based heterogeneous catalysts supported on a carbon matrix in the literature.The remarkable catalytic activities of PdAg-PEI-FAC result from high dispersion Pd and synergistic effects between the PdAg bimetallic system.Furthermore,the amide(-NH)group in PEI coated on cellulose acting as a proton scavenger efficiently improves the catalytic property of catalyst.In addition,the critical factors affecting H;release,such as FA concentration,reaction temperature,PdAg compositions and support matrix type,are also evaluated.Based on the experimental results,the probable three-step mechanism of H_(2)evolution from FA over Pd_(3.75)Ag_(3.75)-PEI-FAC is proposed.In the end,the activation energy(Ea)of Pd_(3.75)Ag_(3.75)-PEI-FAC catalyst is calculated to 53.97 kJ mol^(-1),and this catalyst shows unique robustness and satisfactory re-usability with no loss of catalytic activity after five recycles.The findings in this work provide a novel routine from lignocellulose fractionation towards cellulose-derived catalyst for H_(2)evolution.

A Highly Efficient and Selective Water-Soluble Bimetallic Catalyst for Hydrogenation of Chloronitrobenzene to Chloroaniline

Selective hydrogenation of chloronitrobenzene(CNB) to chloroaniline(CAN) catalyzed by water-soluble Ru/Pt bimetallic catalyst in an aqueous-organic biphasic system was studied. It was found that the catalytic activity increased obviously due to the addition of platinum. Ru/Pt bimetallic catalysts exhibited a strong synergistic effect when the molar ratio of Pt was in the range of 5%—80%. Under the mild conditions including a temperature of 25 ℃, a hydrogen pressure of 1.0 MPa and a Pt molar ratio of 20%, the conversion of p-chloronitrobenzene(p-CNB) reached 99.9%, with the selectivity to p-chloroaniline(p-CAN) equating to 99.4%. The Ru/Pt catalyst also showed high activity and selectivity for the hydrogenation of other chloro- and dichloro-nitrobenzenes with different substituted positions. In addition, the catalyst can be recycled five times without significant loss of activity.

Hydrodeoxygenation of Bio-Oil on Bimetallic Catalysts: From Model Compound to Real Feed

Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which caused a decrease in metal particle size and stabilized Ni active sites in the near surface region. The balanced combination of formed Ni-Co alloy with acidity from supports allowed performing all individual steps in the reaction network toward desired products at high rate. Consequently, the two best-performing catalysts were tested in HDO of wood based bio-oil, showing that the bimetallic catalyst 10Ni10Co/HZSM-5 was more effective than 20Ni/HZSM-5 in terms of degree of deoxygenation and upgraded bio-oil yield. These findings might open an opportunity for development of a novel cheap but effective catalyst for a key step in the process chain from biomass to renewable liquid fuels.