Aggregate binding agents improve soil aggregate stability in Robinia pseudoacacia forests along a climatic gradient on the Loess Plateau,China

The distribution of binding agents(i.e.,soil organic carbon(SOC)and glomalin-related soil protein(GRSP))in soil aggregates was influenced by many factors,such as plant characteristics and soil properties.However,how these factors affect binding agents and soil aggregate stability along a climatic gradient remained unclear.We selected the Robinia pseudoacacia L.forests from semi-arid to semi-humid of the Loess Plateau,China to analyze the plant biomass,soil physical-chemical properties,SOC and GRSP distribution in different sized soil aggregates.We found that from semi-arid to semi-humid forests:(1)the proportion of macro-aggregates(>0.250 mm)significantly increased(P<0.05),whereas those of micro-aggregates(0.250–0.053 mm)and fine materials(<0.053 mm)decreased and soil aggregate stability was increased;(2)the contents of SOC and GRSP in macro-aggregates and micro-aggregates significantly increased,and those in fine materials decreased;(3)the contribution of SOC to soil aggregate stability was greater than those of total GRSP and easily extractable GRSP;(4)soil properties had greater influence on binding agents than plant biomass;and(5)soil aggregate stability was enhanced by increasing the contents of SOC and GRSP in macro-aggregates and soil property was the important part during this process.Climate change from semi-arid to semi-humid forests is important factor for soil structure formation because of its positive effect on soil aggregates.

Effects of organic mulching on soil aggregate stability and aggregate binding agents in an urban forest in Beijing, China

Urban forest soil is often disturbed by rapid urbanization. Organic mulching is effective for improving soil quality and aggregate stability. This study evaluated how soil binding agents changed aggregate stability through organic mulching in urban forest soils. Three treatments were applied in Jiufeng National Forest Park, Beijing: (1) no organic mulch (control);(2) wood chips alone (5 cm thickness);and, (3) wood chips + wood compost (This mulch was divided into two layers, the upper layer of wood chips (2.5 cm), the lower layer wood compost (2.5 cm)). Soil samples were collected from the surface 10- cm soil layer and fraction into four aggregates. Glomalin-related soil protein and soil organic carbon were measured in bulk soil and the four aggregates. The results show that wood chips + wood compost increased the proportion of large and small macroaggregates, mean weight diameter and geometric mean diameter. The total and easily extractable glomalin-related soil protein were higher in the wood chips + wood compost. However, soil organic carbon was lower in the wood chips alone application compared to the controls and wood chips + wood compost. Easily extractable / total glomalin-related soil protein and glomalin-related soil protein / soil organic carbon ratios of wood chips alone and wood chips + wood compost had increased trend compared to the controls but did not reach significant levels (p > 0.05). Mean weight diameter and geometric mean diameter correlated positively with total and easily extractable glomalin-related soil protein but were not positively correlated with soil organic carbon, the ratios of easily extractable and total glomalin-related soil protein, and the ratios of glomalin-related soil protein and soil organic carbon. Redundancy analysis revealed that total glomalin-related soil protein was the most important driver for soil aggregate stability, especially the total glomalin-related soil protein of small macroaggregates. The results suggest that wood chips + wood compost enhanced soil aggregate stability through the increase of glomalin-related soil protein. Wood chips alone cannot enhance soil aggregate stability in urban forests in the short term.

Effects of compost particle size,moisture content and binding agents on co-compost pellet properties

Composting is one of the sustainable answers for the management of organic municipal waste.Bulky nature of loose compost is one of the main drawbacks in promoting compost in agriculture and pelletization of compost can offset these drawbacks.In this study,the optimum conditions in a die and roller pelletizer to form pellets with desirable properties;bulk density,compressive strength,pellet length and disintegration ability with compost particles of different mesh sizes(2.5,3.5,5 mm),moisture contents(25%,30%,35%,40%,45%),different amounts and types of binding agents(1%,2%,3%by weight of Rice Flour(RF),Lime,Rock Phosphate(RP))were investigated.Pelletizing increased the bulk density of compost.Compost with≤5 mm particles and 25%moisture content resulted pellets with the highest compressive strength and a higher percentage of long pellets.However,the tested properties varied with the type and the amount binding agents used with compost.Disintegration was not observed in pellets free of binding agents during the tested period but binding agents enhanced disintegration.Both machine efficiency and production efficiency decreased with increased moisture in compost and increased with increased compost particle size.However,increased amounts of binding agents in compost reduced the machine efficiency.This work shows that compost pelletizing with and without binding agents,enhanced properties of compost required in transportation,storage and application in agriculture.

Determination of Ni^(2+) in Waters with Sodium Polyacrylate as a Binding Phase in Diffusive Gradients in Thin-films

An aqueous solution containing sodium polyacrylate（PAAS） was used in diffusive gradient in thin-films technique（DGT） to measure DGT-labile Ni2＋ concentrations.The DGT devices（PAAS DGT） were validated in four types of solutions,including synthetic river water containing metal ions with complexing EDTA or that without complexing EDTA,natural river water（Ling River,Jinzhou,China） spiked with Ni2＋,and an industrial wastewater （Jinzhou,China）.Results show that only free metal ions were measured by PAAS DGT,recovery=97.36% in the solutions containing only free metal ions,recovery=49.62% in a solution with metal/EDTA molar ratio of 2：1 and recovery=0 in the solutions with metal/EDTA molar ratios of 1：1 and 1：2.These indicated that the complexes of Ni-EDTA were DGT-inert.The DGT performance in spiked river water（recovery=18.24%） and in industrial wastewater（recovery=12.25%） were investigated,which indicated that the measurement of metals by this DGT device did not include the humic substances complexed fractions of metals.The binding properties of PAAS DGT for Ni2＋ were investigated under different conditions of pH value and ionic strength.Conditional stability constants（lgK） of PAAS-Ni complexes were also evaluated.

A crosslinking hydrogel binder for high-sulfur content S@pPAN cathode in rechargeable lithium batteries

High-energy density lithium-sulfur(Li-S) batteries have received intensive attention as promising energy storage system.Among diverse sulfur-based cathodes,sulfurized pyrolyzed poly(acrylonitrile)(S@pPAN)cathode delivered superior electrochemical performance.However,the sulfur content of S@pPAN is relatively low(<50 wt%),which significantly limits the energy density.Herein,a hydrogel SA-Cu binder was proposed with a crosslinking network constructed by Cu^(2+) ions.The introduction of Cu^(2+) ions enabled excellent electrochemical behaviors of S@pPAN cathode even with high sulfur content of 52.6 wt% via chemical interaction with sulfur and polysulfide.Moreover,a favorable cathode interphase was formed containing electrochemically active and conductive CuSx.S@pPAN/SA-Cu exhibited a high sulfur utilization of 85.3%,long cycling stability over 1000 cycles and remarkable capacity of 1200 mAh g_(s)^(-1) even at10 C.Furthermore,ascribed to the improved electrode structure,high-loading electrode(sulfur loading:4 mg cm^(-2)) displayed stable cycling with areal capacity of 5.26 mAh cm^(-2)(1315 mAh g_(s)^(-1)) after 40 cycles.This study provides new directions to prepare high-sulfur content and high-loading S@pPAN cathode for higher energy density.

Modification of methyl oleate for silicon-based biological lubricating base oil

A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.

Novel synthetic acridine-based derivatives as topoisomerase Ⅰ inhibitors

Novel DNA binding agents against topoisomerases are needed for effective treatment of cancers. A series of new acridine-based derivatives 7a-7d were synthesized and their antiproliferative activity against K562 and HepG-2 cell lines were evaluated. Compound 7c with pyridin-2-yl-methanamino group substituted at the C9 position of acridine showed good antitumor activity against both cell lines. The DNA-binding affinity of compound 7c was evaluated by UV-vis absorption spectra and fluorescence emission spectra. DNA topoisomerase I mediated relaxation of plasmid pBR322 DNA was also tested. Our results suggested that compound 7c with good antitumor activity and topoisomerase I inhibition activity can be developed as a prime candidate for further chemical optimization.