The bioactive glass and related biomaterials have become increasingly popular, and have also attracted the research interest of many researchers in recent years due its special performance and tissue engineering appli...The bioactive glass and related biomaterials have become increasingly popular, and have also attracted the research interest of many researchers in recent years due its special performance and tissue engineering application. In this study, to create a material with a variety of properties Mg doped hollow bioactive glass (Mg-HBG) of 80SiO2-5P2O5-10CaO-5MgO system had been produced by using a sol-gel method. The porous structure nanoparticles were specifically made by employing the cetyltrimethylammonium bromide (CTAB) as a surfactant. Magnesium was selected as a doped material with HBG, because it is the most existing cations in the human body which helps for bone metabolism as well as it has antibacterial property. Based on different investigations resulted nanoparticle with the inclusion of the lower molar fractions magnesium has good tested result. For a drug model vancomycin hydrochloride (VAN) was used in this study and it has also good antibacterial activity effect. These findings help the possibility of using Mg-HBG nanoparticles to treat infectious bone abnormalities by demonstrating their compatibility with antibiotics, drug loading and release behavior.展开更多
Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages compared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promisin...Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages compared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promising substrate material for bone tissue engineering and large-scale bone repair. Porous sol-gel glass in the CaO-SiO2-P205 system with macropores larger than 100 μm was prepared by the addition of stearic acid as a pore former. The diameter of the pore created by the pore former varied from 100 to 300 μm. The formation of a hydroxyapatite layer on the glass was analyzed by studying the surface of the porous glass by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra after they had been immersed in simulated body fluid （SBF） for some time, and the porous glass shows good bioactivity.展开更多
The purpose of this research was to prepare machinable bioactive glass-ceramics by sol-gel method. A multi-component composite sol with great uniformity and stability was first prepared by a 2-step method. The compos...The purpose of this research was to prepare machinable bioactive glass-ceramics by sol-gel method. A multi-component composite sol with great uniformity and stability was first prepared by a 2-step method. The composite sol was then transformed into gel by aging under different temperatures. The gel was dried finally by super critically drying method and sintered to obtain the machinable bioactive glass-ceramics. Effect of thermal treatment on crystallization of the glass-ceramics was investigated by X-ray diffraction （ XRD ） analysis. Microstructure of the glass- ceramics was observed by Scanning Electron Microscopy （SEM） and the mechanism of machinability was discussed. Phlogopite and hydroxylapatite were identified as main crystal phases by XRD analysis under thermal treatment at 750℃ and 950℃ for 1.5 h separately. The relative bulk density could achieve 99% under 1050℃ for 4 h. Microstructure of the glass-ceramics showed that the randomly distributed phlogopite and hydroxylapatite phases were favorable to the machinability of the glass-ceramics. A mean bending strength of about 160- 180 MPa and a fracture toughness parameter KIC of aboat 2.1-2.3 were determined for the glass-ceramics.展开更多
The porous scaffold of the sol-gel derived bioactive glass （BG） in the system CaO-P2O5-SiO2 was treated with the type Ⅰ collagen solution. The pore walls of the scaffold were covered by the collagenous network. The...The porous scaffold of the sol-gel derived bioactive glass （BG） in the system CaO-P2O5-SiO2 was treated with the type Ⅰ collagen solution. The pore walls of the scaffold were covered by the collagenous network. The in vitro mineralization behavior of the sol- gel derived bioglassl collegen composite porous scaffold was investigated by immersion in supersaturated calcification solution （ SCS ） at 37℃ for different times, XRD , FTIR, SEM/ EDAX techniques were applied to analyze the crystalline phases, morphology and composition of the minerals formed on the pore walls of the scaffold. It was found that with increasing of immersion time, the morphology of reaction products on the pore walls changed from the spherical particles of calcium phosphate to the flake-like HCA crystals.展开更多
The main objective of the present work was to investigate the effect of surfactant type and synthesis temperature on the structure, porosity and the bioactivity of 92S6 (92% SiO2, 6% CaO, and 2% P2O5 mol %) mesoporous...The main objective of the present work was to investigate the effect of surfactant type and synthesis temperature on the structure, porosity and the bioactivity of 92S6 (92% SiO2, 6% CaO, and 2% P2O5 mol %) mesoporous sol-gel glasses. The aim was to provide a basis for controlling the bioactive behavior of the different 92S6 samples used for tissue regeneration and for biomedical engineering in order to obtain sufficient performances by controlling the porosity of the glass. In this paper, a series of mesoporous bioactive glasses were synthesized using three different surfactants (C10H20BrN, C19H42BrN, C22H48BrN) at different aging temperatures (20°C, 40°C and 60°C). The surfactant was removed by calcination, which was carried out by increasing the temperature to 650°C for 6 h. A comparison among these synthesized glasses was conducted and the research emphasis was placed on the synthesis temperature and the surfactant type dependence on the textural properties and particularly porosity that were ultimately responsible for glass bioactivity.展开更多
The object of this study was to evaluate the effect of bioactive glass （BG） size on mineral formation on dentin surfaces. Totally demineralized dentin discs were treated using BG suspensions with different particle ...The object of this study was to evaluate the effect of bioactive glass （BG） size on mineral formation on dentin surfaces. Totally demineralized dentin discs were treated using BG suspensions with different particle sizes： i.e., microscale bioactive glass （m-BG）, submicroscale bioactive glass （sm-BG） and nanoscale bioactive glass （n-BG）. Field-emission scanning electron microscopy and 3D profile measurement laser microscopy were used to observe the surface morphology and roughness. It was found that all BG particles could promoted mineral formation on dentin surfaces, while plug-like depositions were observed on the dentin discs treated by n-BG and they were more acid-resistant. The present results may imply that n-BG has potential clinical application for dentin hypersensitivity treatment.展开更多
文摘The bioactive glass and related biomaterials have become increasingly popular, and have also attracted the research interest of many researchers in recent years due its special performance and tissue engineering application. In this study, to create a material with a variety of properties Mg doped hollow bioactive glass (Mg-HBG) of 80SiO2-5P2O5-10CaO-5MgO system had been produced by using a sol-gel method. The porous structure nanoparticles were specifically made by employing the cetyltrimethylammonium bromide (CTAB) as a surfactant. Magnesium was selected as a doped material with HBG, because it is the most existing cations in the human body which helps for bone metabolism as well as it has antibacterial property. Based on different investigations resulted nanoparticle with the inclusion of the lower molar fractions magnesium has good tested result. For a drug model vancomycin hydrochloride (VAN) was used in this study and it has also good antibacterial activity effect. These findings help the possibility of using Mg-HBG nanoparticles to treat infectious bone abnormalities by demonstrating their compatibility with antibiotics, drug loading and release behavior.
基金the National Natural Science Foundation of China(No.50174059)
文摘Bioactive glass is well known for its ability of bone regeneration, and sol-gel bioactive glass has many advantages compared with melt-derived bioactive glass. 3-D scaffold prepared by the sol-gel method is a promising substrate material for bone tissue engineering and large-scale bone repair. Porous sol-gel glass in the CaO-SiO2-P205 system with macropores larger than 100 μm was prepared by the addition of stearic acid as a pore former. The diameter of the pore created by the pore former varied from 100 to 300 μm. The formation of a hydroxyapatite layer on the glass was analyzed by studying the surface of the porous glass by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra after they had been immersed in simulated body fluid （SBF） for some time, and the porous glass shows good bioactivity.
文摘The purpose of this research was to prepare machinable bioactive glass-ceramics by sol-gel method. A multi-component composite sol with great uniformity and stability was first prepared by a 2-step method. The composite sol was then transformed into gel by aging under different temperatures. The gel was dried finally by super critically drying method and sintered to obtain the machinable bioactive glass-ceramics. Effect of thermal treatment on crystallization of the glass-ceramics was investigated by X-ray diffraction （ XRD ） analysis. Microstructure of the glass- ceramics was observed by Scanning Electron Microscopy （SEM） and the mechanism of machinability was discussed. Phlogopite and hydroxylapatite were identified as main crystal phases by XRD analysis under thermal treatment at 750℃ and 950℃ for 1.5 h separately. The relative bulk density could achieve 99% under 1050℃ for 4 h. Microstructure of the glass-ceramics showed that the randomly distributed phlogopite and hydroxylapatite phases were favorable to the machinability of the glass-ceramics. A mean bending strength of about 160- 180 MPa and a fracture toughness parameter KIC of aboat 2.1-2.3 were determined for the glass-ceramics.
文摘The porous scaffold of the sol-gel derived bioactive glass （BG） in the system CaO-P2O5-SiO2 was treated with the type Ⅰ collagen solution. The pore walls of the scaffold were covered by the collagenous network. The in vitro mineralization behavior of the sol- gel derived bioglassl collegen composite porous scaffold was investigated by immersion in supersaturated calcification solution （ SCS ） at 37℃ for different times, XRD , FTIR, SEM/ EDAX techniques were applied to analyze the crystalline phases, morphology and composition of the minerals formed on the pore walls of the scaffold. It was found that with increasing of immersion time, the morphology of reaction products on the pore walls changed from the spherical particles of calcium phosphate to the flake-like HCA crystals.
文摘The main objective of the present work was to investigate the effect of surfactant type and synthesis temperature on the structure, porosity and the bioactivity of 92S6 (92% SiO2, 6% CaO, and 2% P2O5 mol %) mesoporous sol-gel glasses. The aim was to provide a basis for controlling the bioactive behavior of the different 92S6 samples used for tissue regeneration and for biomedical engineering in order to obtain sufficient performances by controlling the porosity of the glass. In this paper, a series of mesoporous bioactive glasses were synthesized using three different surfactants (C10H20BrN, C19H42BrN, C22H48BrN) at different aging temperatures (20°C, 40°C and 60°C). The surfactant was removed by calcination, which was carried out by increasing the temperature to 650°C for 6 h. A comparison among these synthesized glasses was conducted and the research emphasis was placed on the synthesis temperature and the surfactant type dependence on the textural properties and particularly porosity that were ultimately responsible for glass bioactivity.
基金the financial support from the National Natural Science Foundation of China (No. 51372005)
文摘The object of this study was to evaluate the effect of bioactive glass （BG） size on mineral formation on dentin surfaces. Totally demineralized dentin discs were treated using BG suspensions with different particle sizes： i.e., microscale bioactive glass （m-BG）, submicroscale bioactive glass （sm-BG） and nanoscale bioactive glass （n-BG）. Field-emission scanning electron microscopy and 3D profile measurement laser microscopy were used to observe the surface morphology and roughness. It was found that all BG particles could promoted mineral formation on dentin surfaces, while plug-like depositions were observed on the dentin discs treated by n-BG and they were more acid-resistant. The present results may imply that n-BG has potential clinical application for dentin hypersensitivity treatment.
