Many strains of microalgae can grow in wastewaters through their ability to utilize inorganic nitrogen and phosphorus in wastewater. The content of municipal wastewater changes from a location to others. Biofuel produ...Many strains of microalgae can grow in wastewaters through their ability to utilize inorganic nitrogen and phosphorus in wastewater. The content of municipal wastewater changes from a location to others. Biofuel production from municipal wastewater has gained huge importance due to progresses in cultivation of microalgae in wastewaters. Biobutanol is produced by the acetone-butanol-ethanol (ABE) fermentation. In this study, we examined the biobutanol production efficiency of Chlorella sp. DEE006 which is cultivated in the municipal wastewater in flat-photobioreactor. Growth of microalgae was monitored at 680 nm using spectrophotometer and the biomass was also pre-treated with acidic hydrolysis (1 M H2SO4). Total carbohydrate and protein contents were measured. Fermented microalgae samples were taken for calculation of biobutanol concentration. We obtained both high biobutanol content (6.23 ± 0.19 g·L−1) and high bioethanol yield 0.16 ± 0.005 g (g sugar)−1. 50% wastewater had the highest biomass concentration (1930 ± 11 mg/L) among the wastewaters with five various concentrations. It had the highest biomass productivity with 0.28 ± 0.001 g L−1d−1. Also, it obtained the highest carbohydrate and protein concentration with 0.80 ± 0.02 gL−1 and 0.95 ± 0.01 gL−1, respectively. According to our results, Chlorella sp. DEE006 can be used for large scale biobutanol production in the future.展开更多
Currently, the analysis of acetone-butanol-ethanol (ABE) broths is performed using both High Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) for each sample since GC cannot be used in quantifying ...Currently, the analysis of acetone-butanol-ethanol (ABE) broths is performed using both High Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) for each sample since GC cannot be used in quantifying sugars and HPLC methods are not yet efficient enough to detect all components separately. In this study, a novel method was developed to quantify all main components present in ABE model solutions (acetone, butanol, ethanol, butyric acid, acetic acid, glucose and xylose) using only HPLC. Although the HPLC operating conditions were optimized to obtain the best possible resolution in HPLC chromatograms, it was observed that the peaks for butyric acid, acetone and ethanol overlapped. The same trend was observed for glucose and xylose. Using the asymmetric Gaussian fit, a program was written in MATLAB to detect the overlapped peaks, deconvolute them and calculate the area of each separated peak. The concentrations of each component were then calculated using the areas and the calibration curves for each component. Experimental results show that this method works well for the ABE model solutions and can be used to quantify all components in the solution when there are some overlapped peaks in the HPLC chromatograms.展开更多
The chemical industry is nowadays predominantly using fossil raw materials,but the alternative use of bio-based resources is investigated to account for the foreseeable scarcity of fossil feedstocks.A main challenge o...The chemical industry is nowadays predominantly using fossil raw materials,but the alternative use of bio-based resources is investigated to account for the foreseeable scarcity of fossil feedstocks.A main challenge of using biobased feedstocks is the complexity of the impurity profile.For an economic production of bio-based chemicals,the use of intensified processes is inevitable and approaches are needed for the various process intensification techniques to identify their applicability to be used for the production of bio-based components.In the presented study,an approach is shown for the reactive distillation(RD) technology to identify the most critical bio-based impurities and their impact on the reactive distillation process.The investigated case-study is the production of n-butyl acrylate from acrylic acid and n-butanol.Among all initially identified impurities,the key impurities,having the biggest impact on the product purity in the reactive distillation process,are found.These impurities are then studied in more detail and an operating window depending on the impurity concentration is identified for the reactive distillation column.Furthermore,an integrated design of upstream and downstream processes is facilitated,as the presented results can be used in the development of the fermentation processes for the production of the bio-based reactants by decreasing the concentration of the critical impurities.展开更多
文摘Many strains of microalgae can grow in wastewaters through their ability to utilize inorganic nitrogen and phosphorus in wastewater. The content of municipal wastewater changes from a location to others. Biofuel production from municipal wastewater has gained huge importance due to progresses in cultivation of microalgae in wastewaters. Biobutanol is produced by the acetone-butanol-ethanol (ABE) fermentation. In this study, we examined the biobutanol production efficiency of Chlorella sp. DEE006 which is cultivated in the municipal wastewater in flat-photobioreactor. Growth of microalgae was monitored at 680 nm using spectrophotometer and the biomass was also pre-treated with acidic hydrolysis (1 M H2SO4). Total carbohydrate and protein contents were measured. Fermented microalgae samples were taken for calculation of biobutanol concentration. We obtained both high biobutanol content (6.23 ± 0.19 g·L−1) and high bioethanol yield 0.16 ± 0.005 g (g sugar)−1. 50% wastewater had the highest biomass concentration (1930 ± 11 mg/L) among the wastewaters with five various concentrations. It had the highest biomass productivity with 0.28 ± 0.001 g L−1d−1. Also, it obtained the highest carbohydrate and protein concentration with 0.80 ± 0.02 gL−1 and 0.95 ± 0.01 gL−1, respectively. According to our results, Chlorella sp. DEE006 can be used for large scale biobutanol production in the future.
文摘Currently, the analysis of acetone-butanol-ethanol (ABE) broths is performed using both High Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) for each sample since GC cannot be used in quantifying sugars and HPLC methods are not yet efficient enough to detect all components separately. In this study, a novel method was developed to quantify all main components present in ABE model solutions (acetone, butanol, ethanol, butyric acid, acetic acid, glucose and xylose) using only HPLC. Although the HPLC operating conditions were optimized to obtain the best possible resolution in HPLC chromatograms, it was observed that the peaks for butyric acid, acetone and ethanol overlapped. The same trend was observed for glucose and xylose. Using the asymmetric Gaussian fit, a program was written in MATLAB to detect the overlapped peaks, deconvolute them and calculate the area of each separated peak. The concentrations of each component were then calculated using the areas and the calibration curves for each component. Experimental results show that this method works well for the ABE model solutions and can be used to quantify all components in the solution when there are some overlapped peaks in the HPLC chromatograms.
基金funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no.241718,Eurobioref
文摘The chemical industry is nowadays predominantly using fossil raw materials,but the alternative use of bio-based resources is investigated to account for the foreseeable scarcity of fossil feedstocks.A main challenge of using biobased feedstocks is the complexity of the impurity profile.For an economic production of bio-based chemicals,the use of intensified processes is inevitable and approaches are needed for the various process intensification techniques to identify their applicability to be used for the production of bio-based components.In the presented study,an approach is shown for the reactive distillation(RD) technology to identify the most critical bio-based impurities and their impact on the reactive distillation process.The investigated case-study is the production of n-butyl acrylate from acrylic acid and n-butanol.Among all initially identified impurities,the key impurities,having the biggest impact on the product purity in the reactive distillation process,are found.These impurities are then studied in more detail and an operating window depending on the impurity concentration is identified for the reactive distillation column.Furthermore,an integrated design of upstream and downstream processes is facilitated,as the presented results can be used in the development of the fermentation processes for the production of the bio-based reactants by decreasing the concentration of the critical impurities.
