This study was conducted to assess the occupational exposure and its health impact on the chromium alloy workers. Environmental and biological monitoring, noise and audiometry measurements were done to evaluate the ex...This study was conducted to assess the occupational exposure and its health impact on the chromium alloy workers. Environmental and biological monitoring, noise and audiometry measurements were done to evaluate the exposure levels in the factory. A total of 112 non-smoking workers were monitored from July 2001 to August 2002 The results showed that most of the chromium and lead exposures in the factory were below the ACGIH-TWA of 50 μg/m 3 for chromium(Ⅵ) and OSHA-PEL of 50 μg/m 3 for lead. The highest chromium(7 25±0 16 μg/m 3) and lead(14 50±0 29 μg/m 3) concentrations were measured in the vibro room. The results indicated that elevated concentrations of chromium and lead were found in both blood and urine samples especially in those areas which were characterized by poor ventilation. The metal contents in blood and urine samples were significantly correlated with airborne metal concentrations in the factory. The result demonstrated that blood and urinary levels among workers were associated with increasing age and duration of exposure. The background noise level of the factory ranged from 67 6 to 89 2 dBA and was frequently higher than the threshold limit value for noise(90 dBA). According to the audiometric test, the exposed workers showed signs of noise-induced hearing loss. Noise at work continued to be an important factor to hearing loss among exposed workers. In our statistical analysis, a significant hearing loss was established on age effect and year of exposure among the workforce.展开更多
A cross sectional epidemiological study of 93 arc welders in a shipyard was conducted to observe the adverse effect of exposure to manganese welding fumes. Among them, 37 workers with paired controls were given the ne...A cross sectional epidemiological study of 93 arc welders in a shipyard was conducted to observe the adverse effect of exposure to manganese welding fumes. Among them, 37 workers with paired controls were given the neurobehavioral tests. Air concentration of manganese in working place, hair manganese and platelet 5 hydroxytryptamine in both exposed workers and controls was also measured. The higher percentage of respiratory symptoms including sour throat and dyspnea in the welders were observed as compared with the controls. The results of neurobehavioral tests showed that the welders exhibited poorer performance in simple reaction time and Santa Ana dexterity tests than that in the controls. The hair manganese concentration was higher and the blood platelet 5 HT level decreased in the welders. In conclusion, symptoms in the welders might be related to the exposure of manganese. Long term exposure to manganese welding fume could cause the change in simple reaction time and Santa Ana dexterity tests. The hair manganese concentration could be used as a biological monitoring index of exposure to manganese.展开更多
Freshwater biota are more comprehensive and direct indicators of biological impacts,and more meaningful to the public than water quality or physical habitat surrogates.Freshwater biotic data and the multiple biologica...Freshwater biota are more comprehensive and direct indicators of biological impacts,and more meaningful to the public than water quality or physical habitat surrogates.Freshwater biotic data and the multiple biological indicators developed from them offer a much richer array of data for assessing the impacts of pollution controls than a limited set of physical or chemical measures.In recent decades,assemblage-based assessments by ecologists,environmental scientists,and water quality agencies have been employed globally for determining the condition of,and threats to,freshwater ecosystems.A key step in this advance has been the development of multimetric indices(MMIs)or indices of biotic integrity(IBIs)based on quantitative assessments of algae,macrophyte,macroinvertebrate,fish or riparian bird assemblages.In Europe,where biological assemblages are mandated for assessing freshwater ecosystem health,many indices are multimetric.However,the proliferation of MMIs globally has not always occurred through the application of rigorous study designs and monitoring protocols,nor have they always effectively incorporated functional metrics,stressor assessments,and statistical analyses.Therefore,in this review,we discuss eleven major concerns with the development and application(including logistical limitations)of multimetric indicators based on freshwater biota to encourage more rigorous and widely applicable(transferable)MMI use and implementation.Specifically,our concerns focus on reference conditions;sampling effort,methods,and season;trophic guild definition;metric comprehensiveness,options,screening and scoring;and MMI validation.MMIs could also benefit from increased attention to ecological mechanisms and metric development,to further improve our understanding of anthropogenic impacts as well as rehabilitation effects on freshwater ecosystems globally.Paying closer attention to study designs,ecological mechanisms and metric development should further improve our understanding of anthropogenic impacts and better facilitate rehabilitation of degraded freshwater ecosystems,as well as aiding in the conservation of healthy freshwater ecosystems globally.展开更多
Current stretchable surface electrodes have attracted increasing attention owing to their potential applications in biological signal monitoring, wearable human-machine interfaces（HMIs） and the Internet of Things. T...Current stretchable surface electrodes have attracted increasing attention owing to their potential applications in biological signal monitoring, wearable human-machine interfaces（HMIs） and the Internet of Things. The paper proposed a stretchable HMI based on a surface electromyography（sEMG） electrode with a self-similar serpentine configuration. The sEMG electrode was transfer-printed onto the skin surface conformally to monitor biological signals, followed by signal classification and controlling of a mobile robot. Such electrodes can bear rather large deformation（such as 〉30%） under an appropriate areal coverage. The sEMG electrodes have been used to record electrophysiological signals from different parts of the body with sharp curvature, such as the index finger,back of the neck and face, and they exhibit great potential for HMI in the fields of robotics and healthcare. The electrodes placed onto the two wrists would generate two different signals with the fist clenched and loosened. It is classified to four kinds of signals with a combination of the gestures from the two wrists, that is, four control modes. Experiments demonstrated that the electrodes were successfully used as an HMI to control the motion of a mobile robot remotely.展开更多
文摘This study was conducted to assess the occupational exposure and its health impact on the chromium alloy workers. Environmental and biological monitoring, noise and audiometry measurements were done to evaluate the exposure levels in the factory. A total of 112 non-smoking workers were monitored from July 2001 to August 2002 The results showed that most of the chromium and lead exposures in the factory were below the ACGIH-TWA of 50 μg/m 3 for chromium(Ⅵ) and OSHA-PEL of 50 μg/m 3 for lead. The highest chromium(7 25±0 16 μg/m 3) and lead(14 50±0 29 μg/m 3) concentrations were measured in the vibro room. The results indicated that elevated concentrations of chromium and lead were found in both blood and urine samples especially in those areas which were characterized by poor ventilation. The metal contents in blood and urine samples were significantly correlated with airborne metal concentrations in the factory. The result demonstrated that blood and urinary levels among workers were associated with increasing age and duration of exposure. The background noise level of the factory ranged from 67 6 to 89 2 dBA and was frequently higher than the threshold limit value for noise(90 dBA). According to the audiometric test, the exposed workers showed signs of noise-induced hearing loss. Noise at work continued to be an important factor to hearing loss among exposed workers. In our statistical analysis, a significant hearing loss was established on age effect and year of exposure among the workforce.
文摘A cross sectional epidemiological study of 93 arc welders in a shipyard was conducted to observe the adverse effect of exposure to manganese welding fumes. Among them, 37 workers with paired controls were given the neurobehavioral tests. Air concentration of manganese in working place, hair manganese and platelet 5 hydroxytryptamine in both exposed workers and controls was also measured. The higher percentage of respiratory symptoms including sour throat and dyspnea in the welders were observed as compared with the controls. The results of neurobehavioral tests showed that the welders exhibited poorer performance in simple reaction time and Santa Ana dexterity tests than that in the controls. The hair manganese concentration was higher and the blood platelet 5 HT level decreased in the welders. In conclusion, symptoms in the welders might be related to the exposure of manganese. Long term exposure to manganese welding fume could cause the change in simple reaction time and Santa Ana dexterity tests. The hair manganese concentration could be used as a biological monitoring index of exposure to manganese.
文摘Freshwater biota are more comprehensive and direct indicators of biological impacts,and more meaningful to the public than water quality or physical habitat surrogates.Freshwater biotic data and the multiple biological indicators developed from them offer a much richer array of data for assessing the impacts of pollution controls than a limited set of physical or chemical measures.In recent decades,assemblage-based assessments by ecologists,environmental scientists,and water quality agencies have been employed globally for determining the condition of,and threats to,freshwater ecosystems.A key step in this advance has been the development of multimetric indices(MMIs)or indices of biotic integrity(IBIs)based on quantitative assessments of algae,macrophyte,macroinvertebrate,fish or riparian bird assemblages.In Europe,where biological assemblages are mandated for assessing freshwater ecosystem health,many indices are multimetric.However,the proliferation of MMIs globally has not always occurred through the application of rigorous study designs and monitoring protocols,nor have they always effectively incorporated functional metrics,stressor assessments,and statistical analyses.Therefore,in this review,we discuss eleven major concerns with the development and application(including logistical limitations)of multimetric indicators based on freshwater biota to encourage more rigorous and widely applicable(transferable)MMI use and implementation.Specifically,our concerns focus on reference conditions;sampling effort,methods,and season;trophic guild definition;metric comprehensiveness,options,screening and scoring;and MMI validation.MMIs could also benefit from increased attention to ecological mechanisms and metric development,to further improve our understanding of anthropogenic impacts as well as rehabilitation effects on freshwater ecosystems globally.Paying closer attention to study designs,ecological mechanisms and metric development should further improve our understanding of anthropogenic impacts and better facilitate rehabilitation of degraded freshwater ecosystems,as well as aiding in the conservation of healthy freshwater ecosystems globally.
基金supported by the National Natural Science Foundation of China(Nos.51635007,91323303)
文摘Current stretchable surface electrodes have attracted increasing attention owing to their potential applications in biological signal monitoring, wearable human-machine interfaces（HMIs） and the Internet of Things. The paper proposed a stretchable HMI based on a surface electromyography（sEMG） electrode with a self-similar serpentine configuration. The sEMG electrode was transfer-printed onto the skin surface conformally to monitor biological signals, followed by signal classification and controlling of a mobile robot. Such electrodes can bear rather large deformation（such as 〉30%） under an appropriate areal coverage. The sEMG electrodes have been used to record electrophysiological signals from different parts of the body with sharp curvature, such as the index finger,back of the neck and face, and they exhibit great potential for HMI in the fields of robotics and healthcare. The electrodes placed onto the two wrists would generate two different signals with the fist clenched and loosened. It is classified to four kinds of signals with a combination of the gestures from the two wrists, that is, four control modes. Experiments demonstrated that the electrodes were successfully used as an HMI to control the motion of a mobile robot remotely.
