Vibrational resonance in globally coupled bistable systems under the noise background

Effects of system size,coupling strength,and noise on vibrational resonance(VR)of globally coupled bistable systems are investigated.The power spectral amplifications obtained by the three methods all show that the VR exists over a wide range of parameter values.The increase in system size induces and enhances the VR,while the increase in noise intensity suppresses and eventually eliminates the VR.Both the stochastic resonance and the system size resonance can coexist with the VR in different parameter regions.This research has potential applications to the weak signal detection process in stochastic multi-body systems.

Stochastic resonance in a time-delayed bistable system subject to multiplicative and additive noise

This paper investigates the stochastic resonance in a time-delayed bistable system subjected to multiplicative and additive white noise and asymmetric dichotomous noise. Under the adiabatic approximation condition, the expression of the signal-to-noise ratio （SNR） is obtained. It finds that the SNR is a non-monotonic function of the delayed times, of the amplitude of the driving square-wave signal, as well as of the asymmetry of the dichotomous noise. In addition, the SNR varies non-monotonously with the intensities of the multiplicative and additive noise as well as the system parameters. Moreover, the SNR depends non-monotonically on the correlate rate of the dichotomous noise.

Stochastic resonance in an under-damped bistable system driven by harmonic mixing signal

Stochastic resonance（SR） is studied in an under-damped bistable system driven by the harmonic mixing signal and Gaussian white noise. Using the linear response theory（LRT）, the expressions of the spectral amplification at fundamental and higher-order harmonic are obtained. The effects of damping coefficient, noise intensity, signal amplitude, and frequency on spectral amplifications are explored. Meanwhile, the power spectral density（PSD） and signal-to-noise ratio（SNR） are calculated to quantify SR and verify the theoretical results. The SNRs at the first and second harmonics exhibit a minimum first and a maximum later with increasing noise intensity. That is, both of the noise-induced suppression and resonance can be observed by choosing proper system parameters. Especially, when the ratio of the second harmonic amplitude to the fundamental one takes a large value, the SNR at the fundamental harmonic is a monotonic function of noise intensity and the SR phenomenon disappears.

Steady-state analysis subject to a coloured and a white additive of a bistable system multiplicative noise noise with coloured cross-correlated noises

The steady-state properties of a bistable system are investigated when both the multiplicative noise and the coupling between additive and multiplicative noises are coloured with different values of noise correlation times T1 and T2. After introducing a dimensionless parameter R（R = α/D, D is the intensity of the multiplicative noise and a is the intensity of the additive noise）, and performing the numerical computations, we find the following points： （1） For the case of R 〉 1, A （the intensity of correlation between additive and multiplicative noises）, T1 and T2 can induce the stationary probability distribution （SPD） transition from bimodal to unimodal in structure, but for the cases of R _〈 1, the bimodal structure is preserved; （2） a can also induce the SPD transition from bimodal to unimodal in structure; （3） the bimodal structure of the SPD exhibits a symmetrical structure as D increases.

Stochastic resonance in a stochastic bistable system with additive noises and square-wave signal

This paper considers the stochastic resonance in a stochastic bistable system driven by a periodic square-wave signal and a static force as well as by additive white noise and dichotomous noise from the viewpoint of signal-to-noise ratio. It finds that the signal-to-noise ratio appears as stochastic resonance behaviour when it is plotted as a function of the noise strength of the white noise and dichotomous noise, as a function of the system parameters, or as a function of the static force. Moreover, the influence of the strength of the stochastic potential force and the correlation rate of the dichotomous noise on the signal-to-noise ratio is investigated.

Effect of Asymmetry in a Bistable System Subject to Multiplicative Colored Noise

By the method of the stochastic energetics,we investigate the stochastic resonance (SR) phenomenon of anoverdamped Brown particle in an asymmetric bistable potential,driven by external periodical signal and multiplicativenoise.The expressions have been obtained for the quasi-steady-state probability distribution function.It is found thatthe input energy (IE) pumped into the system by the external driving shows an SR-like behavior as a function of thenoise strength,whereas the IE turns to be a monotonic function of the correlation time of the noise.The effect ofpotential asymmetry is also studied on SR and IE.

Control of stochastic resonance in bistable systems by using periodic signals

According to the characteristic structure of double wells in bistable systems, this paper analyses stochastic fluctuations in the single potential well and probability transitions between the two potential wells and proposes a method of controlling stochastic resonance by using a periodic signal. Results of theoretical analysis and numerical simulation show that the phenomenon of stochastic resonance happens when the time scales of the periodic signal and the noise-induced probability transitions between the two potential wells achieve stochastic synchronization. By adding a bistable system with a controllable periodic signal, fluctuations in the single potential well can be effectively controlled, thus affecting the probability transitions between the two potential wells. In this way, an effective control can be achieved which allows one to either enhance or realize stochastic resonance.

Stochastic resonance in an asymmetric bistable system driven by coloured noises

The phenomenon of stochastic resonance is investigated in an asymmetric bistable system with coloured noises. The approximate Fokker Planck equation is derived based on the Novikov theorem and the Fox approach. By applying the two-state theory, the expression of the signal-to-noise ratio is obtained in the adiabatic limit. The effects of the noise parameters on signal-to-ratio are discussed. It is found that the stochastic resonance phenomena appear in most cases and disappear in some special cases.

The nonequilibrium phase transition and the symmetry revival induced by time delay in an asymmetric bistable system with correlated noises

The nonequilibrium phase transition and the symmetry revival induced by time delay in a bistable system are investigated. The stationary probability distribution function （SPDF） of the bistable system with time delay and correlated noises are calculated by an analytical method and stochastic simulation respectively. The analytical and simulative results indicate that： （1） There is a certain value of λ（λ denotes the strength of correlations between the multiplicative and additive noises） to make the SPDF symmetric under some time delay; however, above or below the given value, the symmetry will be broken; （2） With the monotonic change of λ, the unimodal peak structure of SPDF becomes bimodal at the beginning, then it becomes unimodal again; this means that there is a reentrance phenomenon in the process; （3） There is a critical value of delay time, which makes the lower peak of SPDF equal to the higher one under the critical condition. This means that the symmetry revival phenomenon emerges.

Time-varying coupling-induced logical stochastic resonance in a periodically driven coupled bistable system

Coupling-induced logical stochastic resonance(LSR) can be observed in a noise-driven coupled bistable system where the behaviors of system can be interpreted consistently as a specific logic gate in an appropriate noise level. Here constant coupling is extended to time-varying coupling, and then we investigate the effect of time-varying coupling on LSR in a periodically driven coupled bistable system. When coupling intensity oscillates periodically with the same frequency with periodic force or relatively high frequency, the system successfully yields the desired logic output. When coupling intensity oscillates irregularly with phase disturbance, large phase disturbance reduces the area of optimal parameter region of coupling intensity and response speed of logic devices. Although the system behaves as a desired logic gate when the frequency of time-periodic coupling intensity is precisely equal to that of periodic force, the desired logic gate is not robust against tiny frequency difference and phase disturbance. Therefore, periodic coupling intensity with high frequency ratio is an optimal option to obtain a reliable and robust logic operation.

Effects of error feedback on a nonlinear bistable system with stochastic resonance

In this paper, we discuss the effects of error feedback on the output of a nonlinear bistable system with stochastic resonance. The bit error rate is employed to quantify the performance of the system. The theoretical analysis and the numerical simulation are presented. By investigating the performances of the nonlinear systems with different strengths of error feedback, we argue that the presented system may provide guidance for practical nonlinear signal processing.

Stochastic resonance in an asymmetric bistable system driven by coloured correlated multiplicative and additive noise

This paper investigates the stochastic resonance （SR） phenomenon in an asymmetric system with coupling between multiplicative and additive noise when the coupling between two noise terms is coloured. The approximate expression of signal-to-noise ratio has been obtained by applying the two-state theory and SR exhibits in the bistable system. Moreover, the potential asymmetry r and cross-correlation strength λ can weaken the SR phenomenon, while the cross-correlation time r can strengthen the SR phenomenon.

Simulation study of the effects of time delay on the correlation function of a bistable system with correlated noises

The effects of time delay on the fluctuation properties of a bistable system are investigated by simulating its normalised correlation function C（s）. Three cases including linear delay, cubic delay and global delay in the system are considered respectively. The simulation results indicate that the linear delay enhances the fluctuation of the system （reduces the stability of the system） while the cubic delay and global delay weaken it （enforce the stability of the system）, and the effect of cubic delay is more pronounced than the linear delay and global delay.

Theoretical and experimental investigation of the resonance responses and chaotic dynamics of a bistable laminated composite shell in the dynamic snap-through mode

The dynamic model of a bistable laminated composite shell simply supported by four corners is further developed to investigate the resonance responses and chaotic behaviors.The existence of the 1:1 resonance relationship between two order vibration modes of the system is verified.The resonance response of this class of bistable structures in the dynamic snap-through mode is investigated,and the four-dimensional(4D)nonlinear modulation equations are derived based on the 1:1 internal resonance relationship by means of the multiple scales method.The Hopf bifurcation and instability interval of the amplitude frequency and force amplitude curves are analyzed.The discussion focuses on investigating the effects of key parameters,e.g.,excitation amplitude,damping coefficient,and detuning parameters,on the resonance responses.The numerical simulations show that the foundation excitation and the degree of coupling between the vibration modes exert a substantial effect on the chaotic dynamics of the system.Furthermore,the significant motions under particular excitation conditions are visualized by bifurcation diagrams,time histories,phase portraits,three-dimensional(3D)phase portraits,and Poincare maps.Finally,the vibration experiment is carried out to study the amplitude frequency responses and bifurcation characteristics for the bistable laminated composite shell,yielding results that are qualitatively consistent with the theoretical results.

Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell:an experimental and numerical study

The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.

Adaptive Bistable Stochastic Resonance Based Weak Signal Reception in Additive Laplacian Noise

Weak signal reception is a very important and challenging problem for communication systems especially in the presence of non-Gaussian noise,and in which case the performance of optimal linear correlated receiver degrades dramatically.Aiming at this,a novel uncorrelated reception scheme based on adaptive bistable stochastic resonance(ABSR)for a weak signal in additive Laplacian noise is investigated.By analyzing the key issue that the quantitative cooperative resonance matching relationship between the characteristics of the noisy signal and the nonlinear bistable system,an analytical expression of the bistable system parameters is derived.On this basis,by means of bistable system parameters self-adaptive adjustment,the counterintuitive stochastic resonance(SR)phenomenon can be easily generated at which the random noise is changed into a benefit to assist signal transmission.Finally,it is demonstrated that approximately 8dB bit error ratio(BER)performance improvement for the ABSR-based uncorrelated receiver when compared with the traditional uncorrelated receiver at low signal to noise ratio(SNR)conditions varying from-30dB to-5dB.

Performance enhancement of a viscoelastic bistable energy harvester using time-delayed feedback control

This paper focuses on the stochastic analysis of a viscoelastic bistable energy harvesting system under colored noise and harmonic excitation, and adopts the time-delayed feedback control to improve its harvesting efficiency. Firstly, to obtain the dimensionless governing equation of the system, the original bistable system is approximated as a system without viscoelastic term by using the stochastic averaging method of energy envelope, and then is further decoupled to derive an equivalent system. The credibility of the proposed method is validated by contrasting the consistency between the numerical and the analytical results of the equivalent system under different noise conditions. The influence of system parameters on average output power is analyzed, and the control effect of the time-delayed feedback control on system performance is compared. The output performance of the system is improved with the occurrence of stochastic resonance(SR). Therefore, the signal-to-noise ratio expression for measuring SR is derived, and the dependence of its SR behavior on different parameters is explored.

Mean first-passage time of an asymmetric bistable system driven by colour-correlated noise

In this paper, the effect of every parameter （including p, q, r, λ, τ） on the mean first-passage time （MFPT） is investigated in an asymmetric bistable system driven by colour-correlated noise. The expression of MFPT has been obtained by applying the steepest-descent approximation. Numerical results show that （1） the intensity of multiplicative noise p and the intensity of additive noise q play different roles in the MFPT of the system, （2） suppression appears on the curve of the MFPT with small λ （e.g. λ 〈 0.5） but there is a peak on the curve of the MFPT when λ is big （e.g. λ 〉 0.5）, and （3） with different values of r （e.g. r = 0.1, 0.5, 1.5）, the effort of τ on the MFPT is diverse.

Effects of correlation time between noises on the noise enhanced stability phenomenon in an asymmetric bistable system

The effects of the correlation time τ between noises on the noise-enhanced stability （NES） phe- nomenon in an asymmetric bistable system driven by cross-correlated noise are investigated. The ex- pressions for the average escape time from the left metastable state TL and from the right metastable state TR are derived. The results indicate that： i） The NES effect is suppressed as the correlation time τ increases for two metastable states; ii） The increase in τ speeds up the escape process from the right state for positively correlated noise, whereas its role is reverses for negatively correlated; iii） In the escape process from the left state, the role of τ is opposite to that in escape from the right state.

Correlated effects of noise on symmetry of an asymmetric bistable system

The effects of correlation between additive and multiplicative noises on the symmetry of an asymmetric bistable system are investigated. The steady-state probability distribution function of the system was calculated by using analytical and numerical methods. Results indicate that i） for the case of positive correlation between noises, as the correlation strength between additive and multiplicative noises, λ, increases, the symmetry of the system is restored; ii） for the case of negative correlation between noises, as the absolute value of λ increases, the symmetry of the system is destroyed; and iii） the analytic prediction agrees well with the stochastic simulation result.