In order to study the mechanical properties of the heterogeneous core plate of the wind turbine blade,a modeling method of the core plate based on displacement field variables is proposed.Firstly,the wind turbine blad...In order to study the mechanical properties of the heterogeneous core plate of the wind turbine blade,a modeling method of the core plate based on displacement field variables is proposed.Firstly,the wind turbine blade core plate was modeled according to the theory of modeling heterogeneous material characteristics.Secondly,the three-point bending finite element model of the wind turbine blade core plate was solved by the display dynamic equation to obtain the deformation pattern and force-deformation relationship of the core plate.Finally,the three-point bending static test was conducted to compare with the finite element analysis.The test results show that:the damage form of the wind turbine blade core plate includes elasticity,yield,and failure stages.The main failure modes are plastic deformation,core material collapse,and panel-core delamination.The failure load measured by the test is 1.59 kN,which is basically consistent with the load-displacement result obtained by the simulation,with a difference of only 1.9%,which verifies the validity and reliability of the model.It provides data references for wind turbine blade structure design.展开更多
Research and development of cast superalloys and processing for turbine blades in BIAM during the last 35 years have been reviewed briefly in this paper.
A new technology for detecting a tiny residual core in the small inner cavity of complex castings is proposed. The residual core is identified by using image recognition technology. Tracer processing and image signal ...A new technology for detecting a tiny residual core in the small inner cavity of complex castings is proposed. The residual core is identified by using image recognition technology. Tracer processing and image signal processing are combined to enhance the image contrast. The relationships between the concentration of tracer, the size of the residual core, the wall thickness of the castings and the contrast were obtained. Based on the experimental data, the minimum detectable amount of residual core under different conditions was obtained. The results show that the minimum detectable amount decreases from 4.398 mg to 0.438 mg for the 1.0 mm wall thickness casting when the concentration of tracer increases from 0% to 20%. The signal-to-noise ratio(SNR) of the detection results increases by 27.010 by means of average filtering and linear point operation. The subtraction of image and image background was performed, and then the boundary extraction was carried out to obtain a clear and reliable result. The experimental results show that the non-traced residual core cannot be detected for a blade with a thickness less than 5 mm. The residual core of 1 mm thickness can be barely identified by artificial recognition after tracer processing and image processing, while the residual core of 0.6 mm thickness can be detected clearly using image recognition technology.展开更多
基金funded by National Natural Science Foundation of China(Grant No.52075305)Natural Science Foundation of Shandong Province(Grant No.ZR2019-MEE076)Zhoucun District School City Integration Development Project(Grant No.2020ZCXCZH01).
文摘In order to study the mechanical properties of the heterogeneous core plate of the wind turbine blade,a modeling method of the core plate based on displacement field variables is proposed.Firstly,the wind turbine blade core plate was modeled according to the theory of modeling heterogeneous material characteristics.Secondly,the three-point bending finite element model of the wind turbine blade core plate was solved by the display dynamic equation to obtain the deformation pattern and force-deformation relationship of the core plate.Finally,the three-point bending static test was conducted to compare with the finite element analysis.The test results show that:the damage form of the wind turbine blade core plate includes elasticity,yield,and failure stages.The main failure modes are plastic deformation,core material collapse,and panel-core delamination.The failure load measured by the test is 1.59 kN,which is basically consistent with the load-displacement result obtained by the simulation,with a difference of only 1.9%,which verifies the validity and reliability of the model.It provides data references for wind turbine blade structure design.
文摘Research and development of cast superalloys and processing for turbine blades in BIAM during the last 35 years have been reviewed briefly in this paper.
基金supported by the National Natural Science Foundation of China(No.51475120)Major Program of National Natural Science Foundation of China(No.U1537201)
文摘A new technology for detecting a tiny residual core in the small inner cavity of complex castings is proposed. The residual core is identified by using image recognition technology. Tracer processing and image signal processing are combined to enhance the image contrast. The relationships between the concentration of tracer, the size of the residual core, the wall thickness of the castings and the contrast were obtained. Based on the experimental data, the minimum detectable amount of residual core under different conditions was obtained. The results show that the minimum detectable amount decreases from 4.398 mg to 0.438 mg for the 1.0 mm wall thickness casting when the concentration of tracer increases from 0% to 20%. The signal-to-noise ratio(SNR) of the detection results increases by 27.010 by means of average filtering and linear point operation. The subtraction of image and image background was performed, and then the boundary extraction was carried out to obtain a clear and reliable result. The experimental results show that the non-traced residual core cannot be detected for a blade with a thickness less than 5 mm. The residual core of 1 mm thickness can be barely identified by artificial recognition after tracer processing and image processing, while the residual core of 0.6 mm thickness can be detected clearly using image recognition technology.
