Aerodynamic Design Methodology for Blended Wing Body Transport

This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.

An efficient aerodynamic shape optimization of blended wing body UAV using multi-fidelity models

This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation models. The wing aerodynamic shape optimization problem is solved by dividing optimization into three steps—modeling 3D（high-fidelity） and 2D（lowfidelity） models, building global meta-models from prominent instead of all variables, and determining robust optimizing shape associated with tuning local meta-models. The adaptive robust design optimization aims to modify the shape optimization process. The sufficient infilling strategy—known as adaptive uniform infilling strategy—determines search space dimensions based on the last optimization results or initial point. Following this, 3D model simulations are used to tune local meta-models. Finally, the global optimization gradient-based method—Adaptive Filter Sequential Quadratic Programing（AFSQP） is utilized to search the neighborhood for a probable optimum point. The effectiveness of the proposed method is investigated by applying it, along with conventional optimization approach-based meta-models, to a Blended Wing Body（BWB） Unmanned Aerial Vehicle（UAV）. The drag coefficient is defined as the objective function, which is subjected to minimum lift coefficient bounds and stability constraints. The simulation results indicate improvement in meta-model accuracy and reduction in computational time of the method introduced in this paper.

Stability characteristics and airworthiness requirements of blended wing body aircraft with podded engines

Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal and directional static stability and damping.In this paper,the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied.According to the differences in flight characteristics of BWB aircraft and conventional aircraft,the different airworthiness requirements for BWB aircraft are analyzed:first,based on current airworthiness regulations and transport aircraft flying quality specification,the relaxation requirement of longitudinal static stability for BWB aircraft is studied;second,the influences of podded engines on longitudinal trim,attitude and trajectory responses and maximum directional control power requirement of BWB aircraft are analyzed;third,the changes in the proportional relationships between the takeoff characteristic speeds of the example BWB aircraft are analyzed.In view of these variations in directional control power requirement and relationships between takeoff characteristic speeds,new recommendations for airworthiness evaluation are proposed for BWB aircraft.The conclusions of this paper are helpful references for configuration design,flight control law design and airworthiness evaluation of BWB aircraft.

Numerical simulation of dynamic characteristics of a water surface vehicle with a blended-wing-body shape

The blended-wing-body shape vehicle is a new type of water surface vehicle with a large square coefficient. The interference of the wave systems under a high speed condition is more significant for the blended-wing-body shape vehicle and the dynamic characteristics of the new type vehicle are very different from that of a traditional vehicle. In this paper, the implicit volume of fluid（VOF） method is adopted to simulate the wave resistance of the high speed blended wing body vehicle, and a semi-relative reference frame method is proposed to compute the maneuvering coefficients. The effects of the navigation speed, the drift angle and the rotating radius are studied. The dimensional analysis method is used to assess the influence of Fr and L/R on the results. The wave making resistance coefficient against the speed sees a large fluctuation because of the serious wave interference. The lateral rotation maneuvering characteristics under the surface navigation condition is nonlinear and more complex than under the under water condition, which is quite different to control.

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

A streamwise-body-force-model （SBFM） is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The val- idation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure performance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tunnel test results. Results show that to reach the goal of rapid integrated simulation combining internal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.